SMB-188 HMBXR5601-490 - Modified som_ctrl block to support rewiring of monitoring-point pins (=> necessary for SMB-CSV), minor editing on other JSON files

This commit is contained in:
gianmarcogirau 2019-01-28 10:15:09 +00:00
commit 11fa71287d
5 changed files with 45 additions and 19 deletions

View file

@ -1,5 +1,5 @@
[{
"ip_name" : "generic_sequencer",
"ip_name" : "generic_sequencer_15",
"bus" : "csr",
"addr_width" : "4",
"description" : "Generic Sequencer core",

View file

@ -229,13 +229,13 @@
"description": "Fractional Divider Enable"
},
"udp_max_pos": {
"type": "r",
"type": "w",
"bit_len": "1",
"reset": "0x0",
"description": "Clear the encoder jitter for DIR-0"
},
"udp_min_pos": {
"type": "r",
"type": "w",
"bit_len": "1",
"reset": "0x0",
"description": "Clear the encoder jitter for DIR-1"

View file

@ -195,16 +195,24 @@
"description": "0 => Driving MP-3, 1 => MP-3 output three-stated"
}
}
},
"mon_pt_sel": {
"address": "5",
"width": "4",
"reset": "0x0",
"type": "w",
"description": "Monitoring Points Stretch-Pulse enable"
}
},
"som_led": {
"type": "w",
"address": "5",
"address": "6",
"reset": "0x00",
"width": "5",
"description": "SOM LEDs value"
},
"stm8_ift": {
"address": "6",
"address": "7",
"width": "9",
"description": "STM8 interface",
"fields": {
@ -226,6 +234,13 @@
"description": "stm8_alert_tx"
}
}
},
"mon_pt_pin_sel": {
"type": "w",
"address": "8",
"reset": "0x0",
"width": "1",
"description": "Rewire Monitoring Points pins to SOM header J5 (Debug)"
}
}
}
}]

View file

@ -6,7 +6,7 @@
-- Author : Gianmarco Girau
-- Company : Global Inkjet Systems
-- Created : 2018-05-15
-- Last update: 2018-12-20
-- Last update: 2019-01-25
-- SVN ID : Git
-- Standard : VHDL 2008
-------------------------------------------------------------------------------
@ -35,6 +35,7 @@ entity som_ctrl_1 is
avs_readdatavalid : out std_logic;
avs_readdata : out std_logic_vector(31 downto 0);
-- SOM Specific I/Fs:
som_mon_pt_pin_rewire : out std_logic;
som_mon_pt_en : out std_logic_vector( 3 downto 0); -- SOM Timing Output enable
som_mon_pt : out std_logic_vector( 3 downto 0); -- SOM Timing I/Os
mon_pt_src : in std_logic_vector(31 downto 0); -- Source signals for the SOM monitoring points
@ -66,7 +67,8 @@ architecture rtl of som_ctrl_1 is
signal swim_write, swim_read, swim_read_d : std_logic;
signal avs_read_d : std_logic;
signal avs_addr : std_logic_vector( 2 downto 0);
signal mon_pt_pin_rewire : std_logic;
signal avs_addr : std_logic_vector( 3 downto 0);
signal swim_addr, mp_stretch_en : std_logic_vector( 3 downto 0);
signal mon_pt_i, mon_pt_ii : std_logic_vector( 3 downto 0);
signal mon_pt_sel_0, mon_pt_sel_1 : std_logic_vector( 7 downto 0);
@ -98,7 +100,8 @@ begin
-----------------------------------------------------------------------------
-- MOnitoring Points
-----------------------------------------------------------------------------
som_mon_pt_pin_rewire <= mon_pt_pin_rewire;
--
som_mon_pt_en(0) <= not mon_pt_sel_0(7);
som_mon_pt_en(1) <= not mon_pt_sel_1(7);
@ -142,7 +145,7 @@ begin
swim_write <= '1' when avs_write = '1' and avs_address(5) = '1' else '0';
swim_read <= '1' when avs_read = '1' and avs_address(5) = '1' else '0';
avs_addr <= avs_address(2 downto 0);
avs_addr <= avs_address(3 downto 0);
pCTRL_STATUS : process(reset_n, clk)
begin
@ -164,6 +167,9 @@ begin
mon_pt_sel_2 <= (7 => '1', others => '0');
mon_pt_sel_3 <= (7 => '1', others => '0');
mp_stretch_en <= (others => '0');
--
mon_pt_pin_rewire <= '0';
--
som_led <= (others => '0');
elsif(clk = '1' and clk'event) then
@ -189,6 +195,8 @@ begin
som_led <= avs_writedata( 4 downto 0);
when CSR_STM8_ADDR =>
stm8_trigger_rx <= avs_writedata(0);
when CSR_MON_PT_PIN_SEL =>
mon_pt_pin_rewire <= avs_writedata(0);
when others => null;
end case;
end if;
@ -219,6 +227,8 @@ begin
avs_readdata_i <= 27x"0" & som_led;
when CSR_STM8_ADDR =>
avs_readdata_i <= (0 => stm8_trigger_rx, 8 => stm8_alert_tx, others => '0');
when CSR_MON_PT_PIN_SEL =>
avs_readdata_i <= (0 => mon_pt_pin_rewire, others => '0');
when others =>
avs_readdata <= X"BAD1BAD0";
end case;

View file

@ -6,7 +6,7 @@
-- Author : GMG
-- Company : Global Inkjet Systems
-- Created : 2018-05-21
-- Last update: 2018-12-20
-- Last update: 2019-01-25
-- SVN ID : Git
-- Standard : VHDL'2008
-------------------------------------------------------------------------------
@ -20,14 +20,15 @@ use ieee.numeric_std.all;
package som_ctrl_1_pkg is
constant CSR_IP_ID_ADDR : std_logic_vector(2 downto 0) := 3x"0";
constant CSR_IP_VER_ADDR : std_logic_vector(2 downto 0) := 3x"1";
constant CSR_PWR_GOOD_ADDR : std_logic_vector(2 downto 0) := 3x"2";
constant CSR_HOST_PWR_ADDR : std_logic_vector(2 downto 0) := 3x"3";
constant CSR_MON_PT_SEL_ADDR : std_logic_vector(2 downto 0) := 3x"4";
constant CSR_MON_PT_STRETCH_ADDR : std_logic_vector(2 downto 0) := 3x"5";
constant CSR_SOM_LED_ADDR : std_logic_vector(2 downto 0) := 3x"6";
constant CSR_STM8_ADDR : std_logic_vector(2 downto 0) := 3x"7";
constant CSR_IP_ID_ADDR : std_logic_vector(3 downto 0) := 4x"0";
constant CSR_IP_VER_ADDR : std_logic_vector(3 downto 0) := 4x"1";
constant CSR_PWR_GOOD_ADDR : std_logic_vector(3 downto 0) := 4x"2";
constant CSR_HOST_PWR_ADDR : std_logic_vector(3 downto 0) := 4x"3";
constant CSR_MON_PT_SEL_ADDR : std_logic_vector(3 downto 0) := 4x"4";
constant CSR_MON_PT_STRETCH_ADDR : std_logic_vector(3 downto 0) := 4x"5";
constant CSR_SOM_LED_ADDR : std_logic_vector(3 downto 0) := 4x"6";
constant CSR_STM8_ADDR : std_logic_vector(3 downto 0) := 4x"7";
constant CSR_MON_PT_PIN_SEL : std_logic_vector(3 downto 0) := 4x"8";
-- offset for the SWIM interface subblock
constant CSR_SWIM_IF_OFFSET : std_logic_vector(5 downto 0) := 6x"20";