HMBSED3000-354. pixel_buffer_zero_gap_2.vhd so that buf_active goes off correctly when data is read quickly to work with D3000 Zero gap

This commit is contained in:
David Steele 2023-02-15 10:21:41 +00:00
commit 420ff85550

View file

@ -139,8 +139,12 @@ architecture rtl of pixel_buffer_zero_gap_2 is
signal q_int : data_array_t(NUM_CHANS-1 downto 0)(MAX_OP_WIDTH*32-1 downto 0);
signal rd_req_int : std_logic_vector(NUM_CHANS-1 downto 0);
signal rd_req_int_d : std_logic_vector(NUM_CHANS-1 downto 0);
signal rd_req_int_d_d : std_logic_vector(NUM_CHANS-1 downto 0);
type rdreq_vec_t is array (natural range <> ) of std_logic_vector;
signal rdreq_vec_int : rdreq_vec_t(NUM_CHANS-1 downto 0)(MAX_OP_WIDTH-1 downto 0);
signal rdreq_vec_int_d : rdreq_vec_t(NUM_CHANS-1 downto 0)(MAX_OP_WIDTH-1 downto 0);
signal rdreq_vec_int_d_d : rdreq_vec_t(NUM_CHANS-1 downto 0)(MAX_OP_WIDTH-1 downto 0);
signal rd_req_rdy_int : std_logic_vector(NUM_CHANS-1 downto 0);
signal empty_int : std_logic_vector(NUM_CHANS-1 downto 0);
@ -280,11 +284,11 @@ begin
end generate;
clr_buf_active_rdreq(i) <= (last_stripe(i)(MAX_OP_WIDTH-1) and is_last_wave(i) and rd_req_int(i))
clr_buf_active_rdreq(i) <= (last_stripe(i)(MAX_OP_WIDTH-1) and is_last_wave(i) and rd_req_int_d_d(i)) -- 2 clocks delay to match delay from rd_req to last_stripe_valid
or last_stripe_dropped(i); -- if the last stripe of the image is dropped, the above case never happens
GEN_SH: for j in 0 to SUB_HEADS-1 generate
clr_buf_active_rdvec(j)(i) <= (last_stripe(i)(j*2) and is_last_wave(i) and rdreq_vec_int(i)(j*2))
clr_buf_active_rdvec(j)(i) <= (last_stripe(i)(j*2) and is_last_wave(i) and rdreq_vec_int_d_d(i)(j*2)) -- 2 clocks delay to match delay from rd_req to last_stripe_valid
or last_stripe_dropped(i); -- if the last stripe of the image is dropped, the above case never happens
clr_buf_active(j)(i) <= clr_buf_active_rdvec(j)(i) when VECTORED_RDREQ else clr_buf_active_rdreq(i);
@ -421,6 +425,23 @@ begin
end process;
P_REG : process(rst_n, clk) is
begin
if rst_n = '0' then
rd_req_int_d <= (others => '0');
rd_req_int_d_d <= (others => '0');
rdreq_vec_int_d <= (others => (others => '0'));
rdreq_vec_int_d_d <= (others => (others => '0'));
elsif clk'event and clk = '1' then
rd_req_int_d <= rd_req_int;
rd_req_int_d_d <= rd_req_int_d;
rdreq_vec_int_d <= rdreq_vec_int;
rdreq_vec_int_d_d <= rdreq_vec_int_d;
end if;
end process;
P_DIAG : process(rst_n, clk) is
begin
if rst_n = '0' then