From dd7a69b95b3fae7b59f32e18293c6ab0ea5c088a Mon Sep 17 00:00:00 2001 From: Damian Smith Date: Fri, 28 May 2021 13:30:32 +0100 Subject: [PATCH 1/4] SMB-362 Modified pof_tx_0.vhd to fix the sending of init messages when register toggled too slowly --- generic_ip/pof_protocol/0/src/pof_tx_0.vhd | 165 +++++++++++---------- 1 file changed, 85 insertions(+), 80 deletions(-) diff --git a/generic_ip/pof_protocol/0/src/pof_tx_0.vhd b/generic_ip/pof_protocol/0/src/pof_tx_0.vhd index fb77229..9a2dab9 100644 --- a/generic_ip/pof_protocol/0/src/pof_tx_0.vhd +++ b/generic_ip/pof_protocol/0/src/pof_tx_0.vhd @@ -30,7 +30,7 @@ entity pof_tx_0 is abs_position : in std_logic_vector(31 downto 0); tx_data : out std_logic; -- Avalon MM Interface - avs_address : in std_logic_vector( 2 downto 0); + avs_address : in std_logic_vector(2 downto 0); avs_write : in std_logic; avs_writedata : in std_logic_vector(31 downto 0); avs_read : in std_logic; @@ -40,10 +40,10 @@ end entity pof_tx_0; architecture rtl of pof_tx_0 is - constant CSR : std_logic_vector( 2 downto 0) := b"000"; - constant ERROR_INJ_REG : std_logic_vector( 2 downto 0) := b"001"; - constant TIMING_REG : std_logic_vector( 2 downto 0) := b"010"; - constant FIFO_LEVEL_REG : std_logic_vector( 2 downto 0) := b"011"; + constant CSR : std_logic_vector(2 downto 0) := b"000"; + constant ERROR_INJ_REG : std_logic_vector(2 downto 0) := b"001"; + constant TIMING_REG : std_logic_vector(2 downto 0) := b"010"; + constant FIFO_LEVEL_REG : std_logic_vector(2 downto 0) := b"011"; constant KEEPALIVE_PERIOD_DEF : integer := 100; constant INIT_BLOCKED_PERIOD_DEF : integer := 200; @@ -51,45 +51,45 @@ architecture rtl of pof_tx_0 is function odd_parity(data : std_logic_vector) return std_logic is variable parity_bit : std_logic := '1'; begin - for n in 0 to data'length-1 loop + for n in 0 to data'length - 1 loop parity_bit := parity_bit xor data(n); - end loop; -- n + end loop; -- n return parity_bit; end function odd_parity; function bin2gray(bin : std_logic_vector) return std_logic_vector is variable gray : std_logic_vector(bin'range); begin - gray := bin xor ('0' & bin(bin'length-1 downto 1)); + gray := bin xor ('0' & bin(bin'length - 1 downto 1)); return gray; end function bin2gray; - - signal rd_event, wr_event, empty, full, tx_ready : std_logic; - signal rd_event_d, wr_event_i, symbol_valid : std_logic; - signal enable, toggle_sync, toggle_pd : std_logic; - signal add_keepalive, ovfl_err, init_d, init_gen : std_logic; - signal clear, pd_in_d, pd_gen, parity_bit : std_logic; - signal inject_error, inject_error_req : std_logic; - signal pd_event, pd_event_d, pd_event_dd : std_logic; - signal init_blocked, pd_event_ddd, delayed_pos : std_logic; - signal clr_fifo_lmax : std_logic; + + signal rd_event, wr_event, empty, full, tx_ready : std_logic; + signal rd_event_d, wr_event_i, symbol_valid : std_logic; + signal enable, toggle_sync, toggle_pd : std_logic; + signal add_keepalive, ovfl_err, init_d, init_gen : std_logic; + signal clear, pd_in_d, pd_gen, parity_bit : std_logic; + signal inject_error, inject_error_req : std_logic; + signal pd_event, pd_event_d, pd_event_dd : std_logic; + signal init_blocked, pd_event_ddd, delayed_pos : std_logic; + signal clr_fifo_lmax : std_logic; -- - signal delayed_pos_v : std_logic_vector( 2 downto 0); - signal init_v, gray, bit_div : std_logic_vector( 3 downto 0); - signal latched_pos : std_logic_vector( 3 downto 0); - signal event_in_i : std_logic_vector( 6 downto 0); - signal event_in, event_out : std_logic_vector( 7 downto 0); - signal symbol : std_logic_vector( 7 downto 0); - signal init_blk_cnt : std_logic_vector( 9 downto 0) := (others => '0'); - signal keepalive_cnt : std_logic_vector( 9 downto 0); - signal keepalive_period : std_logic_vector( 9 downto 0); - signal init_blocked_period : std_logic_vector( 9 downto 0); - signal fifo_level, fifo_level_max : std_logic_vector( 9 downto 0); + signal delayed_pos_v : std_logic_vector(2 downto 0); + signal init_v, gray, bit_div : std_logic_vector(3 downto 0); + signal latched_pos : std_logic_vector(3 downto 0); + signal event_in_i : std_logic_vector(6 downto 0); + signal event_in, event_out : std_logic_vector(7 downto 0); + signal symbol : std_logic_vector(7 downto 0); + signal init_blk_cnt : std_logic_vector(9 downto 0) := (others => '0'); + signal keepalive_cnt : std_logic_vector(9 downto 0); + signal keepalive_period : std_logic_vector(9 downto 0); + signal init_blocked_period : std_logic_vector(9 downto 0); + signal fifo_level, fifo_level_max : std_logic_vector(9 downto 0); begin - clear <= not enable or init_d; + clear <= (not enable) or init_d; ----------------------------------------------------------------------------- -- Encode events and queue these in a FIFO @@ -97,60 +97,64 @@ begin pEVENT_GEN : process(clk) begin - if(clk = '1' and clk'event) then + if (clk = '1' and clk'event) then init_d <= init; - if(init = '1' and init_d = '0' and init_blocked = '0') then - init_v <= "1100"; + if (init = '0' and init_d = '1') then + -- set up int_v to create 2 packets with the new toggle_sync value when init set low + init_v <= "1100"; + -- start timer so this doesn't get triggered again too soon + -- the local clear will still hapen as that depends on init_d + init_blk_cnt <= init_blocked_period; else init_v <= '0' & init_v(3 downto 1); + if (init_blocked = '1') then + init_blk_cnt <= std_logic_vector(unsigned(init_blk_cnt) - 1); + end if; end if; - if(enable = '0') then + if (enable = '0') then toggle_sync <= '0'; - elsif(init_d = '1' and init_blocked = '0') then + elsif (init = '1' and init_d = '0' and init_blocked = '0') then + -- toggle the bit just when init set high. toggle_sync <= not toggle_sync; end if; - if(init_gen = '1') then - init_blk_cnt <= init_blocked_period; - elsif(init_blocked = '1') then - init_blk_cnt <= std_logic_vector(unsigned(init_blk_cnt)-1); - end if; - pd_in_d <= pd_in; + + pd_in_d <= pd_in; pd_event_d <= pd_event; pd_event_dd <= pd_event_d; pd_event_ddd <= pd_event_dd; - if(pd_event = '1') then + if (pd_event = '1') then latched_pos <= abs_position(3 downto 0); end if; - if((dec_pos = '1' or inc_pos = '1') and pd_gen = '1') then + if ((dec_pos = '1' or inc_pos = '1') and pd_gen = '1') then delayed_pos_v <= "111"; else delayed_pos_v <= '0' & delayed_pos_v(2 downto 1); end if; - if(enable = '0') then + if (enable = '0') then toggle_pd <= '0'; - elsif(pd_event = '1') then + elsif (pd_event = '1') then toggle_pd <= not toggle_pd; end if; - wr_event <= wr_event_i or add_keepalive; - event_in <= parity_bit & event_in_i; - if(enable = '0' or wr_event_i = '1') then + wr_event <= wr_event_i or add_keepalive; + event_in <= parity_bit & event_in_i; + if (enable = '0' or wr_event_i = '1') then keepalive_cnt <= keepalive_period; else - keepalive_cnt <= std_logic_vector(unsigned(keepalive_cnt)-1); + keepalive_cnt <= std_logic_vector(unsigned(keepalive_cnt) - 1); end if; - if(clear = '1') then + if (clear = '1') then ovfl_err <= '0'; - elsif(wr_event = '1' and full = '1') then + elsif (wr_event = '1' and full = '1') then ovfl_err <= '1'; end if; - if(clear = '1' or wr_event = '1') then + if (clear = '1' or wr_event = '1') then inject_error <= '0'; - elsif(inject_error_req = '1') then + elsif (inject_error_req = '1') then inject_error <= '1'; end if; - if(init_gen = '1' or clr_fifo_lmax = '1') then + if (clear = '1' or clr_fifo_lmax = '1') then fifo_level_max <= (others => '0'); - elsif(unsigned(fifo_level) > unsigned(fifo_level_max)) then + elsif (unsigned(fifo_level) > unsigned(fifo_level_max)) then fifo_level_max <= fifo_level; end if; end if; @@ -160,16 +164,17 @@ begin init_blocked <= '1' when unsigned(init_blk_cnt) /= 0 else '0'; - pd_event <= pd_in and not pd_in_d; - pd_gen <= pd_event or pd_event_d or pd_event_dd; + pd_event <= pd_in and not pd_in_d; + pd_gen <= pd_event or pd_event_d or pd_event_dd; delayed_pos <= delayed_pos_v(0) and pd_event_ddd; + -- FIXME init_gen does nothing here as clear will be high during this and the fifo will lose the two inserted packets. wr_event_i <= enable and (init_gen or pd_gen or dec_pos or inc_pos or delayed_pos); add_keepalive <= '1' when wr_event_i = '0' and unsigned(keepalive_cnt) = 0 else '0'; -gray <= bin2gray(latched_pos) when (pd_event_d = '1' or pd_event_dd = '1') else bin2gray(abs_position(3 downto 0)); + gray <= bin2gray(latched_pos) when (pd_event_d = '1' or pd_event_dd = '1') else bin2gray(abs_position(3 downto 0)); -- toggle_pd is repeated twice in the tx word, to improve resiliance against -- double bit-flips errors @@ -178,10 +183,10 @@ gray <= bin2gray(latched_pos) when (pd_event_d = '1' or pd_event_dd = '1') else parity_bit <= odd_parity(event_in_i) xor inject_error; iQUEUE_EVENT : entity work.sync_fifo - generic map ( + generic map( FIFO_WIDTH => 8, FIFO_DEPTH => 1024) - port map ( + port map( sclr => clear, clock => clk, data => event_in, @@ -195,23 +200,23 @@ gray <= bin2gray(latched_pos) when (pd_event_d = '1' or pd_event_dd = '1') else ----------------------------------------------------------------------------- -- Transmit symbols over serial link ----------------------------------------------------------------------------- - + pGET_EVENT : process(clk) begin - if(clk = '1' and clk'event) then + if (clk = '1' and clk'event) then rd_event_d <= rd_event; symbol_valid <= rd_event_d; end if; end process pGET_EVENT; rd_event <= '1' when tx_ready = '1' and empty = '0' and rd_event_d = '0' and symbol_valid = '0' else '0'; - - symbol <= event_out; + + symbol <= event_out; iTX_SYMBOL : entity work.uart_tx_0 - generic map ( + generic map( data_width => 8) - port map ( + port map( reset_n => reset_n, clk => clk, bit_div => bit_div, @@ -227,36 +232,36 @@ gray <= bin2gray(latched_pos) when (pd_event_d = '1' or pd_event_dd = '1') else pCTRL_STATUS : process(reset_n, clk) begin - if(reset_n = '0') then + if (reset_n = '0') then avs_readdatavalid <= '0'; enable <= '0'; clr_fifo_lmax <= '0'; bit_div <= "0010"; keepalive_period <= std_logic_vector(to_unsigned(KEEPALIVE_PERIOD_DEF, 10)); init_blocked_period <= std_logic_vector(to_unsigned(INIT_BLOCKED_PERIOD_DEF, 10)); - elsif(clk = '1' and clk'event) then - inject_error_req <= '0'; - clr_fifo_lmax <= '0'; + elsif (clk = '1' and clk'event) then + inject_error_req <= '0'; + clr_fifo_lmax <= '0'; -- CTRL registers - if(avs_write = '1') then + if (avs_write = '1') then case avs_address is when CSR => - enable <= avs_writedata(0); - clr_fifo_lmax <= avs_writedata(2); - bit_div <= avs_writedata(7 downto 4); - when ERROR_INJ_REG => + enable <= avs_writedata(0); + clr_fifo_lmax <= avs_writedata(2); + bit_div <= avs_writedata(7 downto 4); + when ERROR_INJ_REG => inject_error_req <= avs_writedata(0); when TIMING_REG => - keepalive_period <= avs_writedata( 9 downto 0); + keepalive_period <= avs_writedata(9 downto 0); init_blocked_period <= avs_writedata(25 downto 16); when others => null; end case; - end if; + end if; -- Read Ctrl & Status registers avs_readdatavalid <= avs_read; - if(avs_read = '1') then + if (avs_read = '1') then case avs_address is - when CSR => + when CSR => avs_readdata <= X"000000" & bit_div & b"0" & clr_fifo_lmax & ovfl_err & enable; when TIMING_REG => avs_readdata <= 6x"0" & init_blocked_period & 6x"0" & keepalive_period; @@ -268,5 +273,5 @@ gray <= bin2gray(latched_pos) when (pd_event_d = '1' or pd_event_dd = '1') else end if; end if; end process pCTRL_STATUS; - + end architecture rtl; From 5a6bbfbf289a757e3945b5667af358b4373fe734 Mon Sep 17 00:00:00 2001 From: Damian Smith Date: Fri, 28 May 2021 15:07:58 +0100 Subject: [PATCH 2/4] SMB-362 smb_init now sends messages even if the toggle is far apart. Added an output port to tell smb_ctrl when init is complete. --- generic_ip/pof_protocol/0/src/pof_tx_0.vhd | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/generic_ip/pof_protocol/0/src/pof_tx_0.vhd b/generic_ip/pof_protocol/0/src/pof_tx_0.vhd index 9a2dab9..386a332 100644 --- a/generic_ip/pof_protocol/0/src/pof_tx_0.vhd +++ b/generic_ip/pof_protocol/0/src/pof_tx_0.vhd @@ -24,6 +24,7 @@ entity pof_tx_0 is reset_n : in std_logic; clk : in std_logic; init : in std_logic; + init_done : out std_logic; pd_in : in std_logic; inc_pos : in std_logic; dec_pos : in std_logic; @@ -157,19 +158,20 @@ begin elsif (unsigned(fifo_level) > unsigned(fifo_level_max)) then fifo_level_max <= fifo_level; end if; + init_done <= not (init_d or init_blocked); -- true only when the init messages have been transmitted (based on timing) end if; end process pEVENT_GEN; init_gen <= init_v(0); init_blocked <= '1' when unsigned(init_blk_cnt) /= 0 else '0'; + pd_event <= pd_in and not pd_in_d; pd_gen <= pd_event or pd_event_d or pd_event_dd; delayed_pos <= delayed_pos_v(0) and pd_event_ddd; - -- FIXME init_gen does nothing here as clear will be high during this and the fifo will lose the two inserted packets. wr_event_i <= enable and (init_gen or pd_gen or dec_pos or inc_pos or delayed_pos); add_keepalive <= '1' when wr_event_i = '0' and unsigned(keepalive_cnt) = 0 else '0'; From 6aceb0f116909de066b4d8e678280e0c919e7161 Mon Sep 17 00:00:00 2001 From: Damian Smith Date: Fri, 28 May 2021 15:26:48 +0100 Subject: [PATCH 3/4] SMB-362 update pof_tx_1 to have the same control over init that is in pof_tx_0 --- generic_ip/pof_protocol/1/src/pof_tx_1.vhd | 32 +++++++++++++--------- 1 file changed, 19 insertions(+), 13 deletions(-) diff --git a/generic_ip/pof_protocol/1/src/pof_tx_1.vhd b/generic_ip/pof_protocol/1/src/pof_tx_1.vhd index 835f7c5..018fead 100644 --- a/generic_ip/pof_protocol/1/src/pof_tx_1.vhd +++ b/generic_ip/pof_protocol/1/src/pof_tx_1.vhd @@ -25,6 +25,7 @@ entity pof_tx_1 is reset_n : in std_logic; clk : in std_logic; init : in std_logic; + init_done : out std_logic; pd_in : in std_logic; print_start : in std_logic; inc_pos : in std_logic; @@ -95,7 +96,7 @@ architecture rtl of pof_tx_1 is begin - clear <= not enable or init_d; + clear <= (not enable) or init_d; ----------------------------------------------------------------------------- -- Encode events and queue these in a FIFO @@ -103,24 +104,28 @@ begin pEVENT_GEN : process(clk) begin - if(clk = '1' and clk'event) then + if (clk = '1' and clk'event) then init_d <= init; - if(init = '1' and init_d = '0' and init_blocked = '0') then - init_v <= "1100"; + if (init = '0' and init_d = '1') then + -- set up int_v to create 2 packets with the new toggle_sync value when init set low + init_v <= "1100"; + -- start timer so this doesn't get triggered again too soon + -- the local clear will still hapen as that depends on init_d + init_blk_cnt <= init_blocked_period; else init_v <= '0' & init_v(3 downto 1); + if (init_blocked = '1') then + init_blk_cnt <= std_logic_vector(unsigned(init_blk_cnt) - 1); + end if; end if; - if(enable = '0') then + if (enable = '0') then toggle_sync <= '0'; - elsif(init_d = '1' and init_blocked = '0') then + elsif (init = '1' and init_d = '0' and init_blocked = '0') then + -- toggle the bit just when init set high. toggle_sync <= not toggle_sync; end if; - if(init_gen = '1') then - init_blk_cnt <= init_blocked_period; - elsif(init_blocked = '1') then - init_blk_cnt <= std_logic_vector(unsigned(init_blk_cnt)-1); - end if; - pd_in_d <= pd_in; + + pd_in_d <= pd_in; pd_event_d <= pd_event; pd_event_dd <= pd_event_d; pd_event_ddd <= pd_event_dd; @@ -162,11 +167,12 @@ begin elsif(inject_error_req = '1') then inject_error <= '1'; end if; - if(init_gen = '1' or clr_fifo_lmax = '1') then + if (clear = '1' or clr_fifo_lmax = '1') then fifo_level_max <= (others => '0'); elsif(unsigned(fifo_level) > unsigned(fifo_level_max)) then fifo_level_max <= fifo_level; end if; + init_done <= not (init_d or init_blocked); -- true only when the init messages have been transmitted (based on timing) end if; end process pEVENT_GEN; From 50e20d67f3dcc3a1a0659b1f2b895c3aa9343e7d Mon Sep 17 00:00:00 2001 From: Damian Smith Date: Wed, 2 Jun 2021 13:34:12 +0100 Subject: [PATCH 4/4] SMB-362 Removed generic_seq_ram_15 which is no-longer used in the sequencer (tidy up). Modified pof_tx_rx_1_tb.vhd as the stop-bit and start-bit injected errors were not really valid (stop-bit could be missing for several symbol periods) --- .../15/src/altera/generic_seq_ram_15.vhd | 229 ------------------ .../pof_protocol/1/sim/wave_pof_txrx.do | 166 ++++++------- .../1/src/test/pof_tx_rx_1_tb.vhd | 107 ++++---- 3 files changed, 138 insertions(+), 364 deletions(-) delete mode 100644 generic_ip/generic_sequencer/15/src/altera/generic_seq_ram_15.vhd diff --git a/generic_ip/generic_sequencer/15/src/altera/generic_seq_ram_15.vhd b/generic_ip/generic_sequencer/15/src/altera/generic_seq_ram_15.vhd deleted file mode 100644 index d6fb8f1..0000000 --- a/generic_ip/generic_sequencer/15/src/altera/generic_seq_ram_15.vhd +++ /dev/null @@ -1,229 +0,0 @@ --- megafunction wizard: %RAM: 2-PORT% --- GENERATION: STANDARD --- VERSION: WM1.0 --- MODULE: altsyncram - --- ============================================================ --- File Name: generic_seq_ram.vhd --- Megafunction Name(s): --- altsyncram --- --- Simulation Library Files(s): --- altera_mf --- ============================================================ --- ************************************************************ --- THIS IS A WIZARD-GENERATED FILE. DO NOT EDIT THIS FILE! --- --- 14.1.1 Build 190 01/19/2015 SJ Web Edition --- ************************************************************ - - ---Copyright (C) 1991-2015 Altera Corporation. All rights reserved. ---Your use of Altera Corporation's design tools, logic functions ---and other software and tools, and its AMPP partner logic ---functions, and any output files from any of the foregoing ---(including device programming or simulation files), and any ---associated documentation or information are expressly subject ---to the terms and conditions of the Altera Program License ---Subscription Agreement, the Altera Quartus II License Agreement, ---the Altera MegaCore Function License Agreement, or other ---applicable license agreement, including, without limitation, ---that your use is for the sole purpose of programming logic ---devices manufactured by Altera and sold by Altera or its ---authorized distributors. Please refer to the applicable ---agreement for further details. - - -LIBRARY ieee; -USE ieee.std_logic_1164.all; - -LIBRARY altera_mf; -USE altera_mf.altera_mf_components.all; -use work.common_pkg.all; - -ENTITY generic_seq_ram_15 IS - generic ( - SEQ_DEPTH : natural range 1 to 1024 - ); - PORT - ( - address_a : IN STD_LOGIC_VECTOR (log2(SEQ_DEPTH)-1 DOWNTO 0); - address_b : IN STD_LOGIC_VECTOR (log2(SEQ_DEPTH)-1 DOWNTO 0); - clock : IN STD_LOGIC := '1'; - data_a : IN STD_LOGIC_VECTOR (31 DOWNTO 0); - data_b : IN STD_LOGIC_VECTOR (31 DOWNTO 0); - wren_a : IN STD_LOGIC := '0'; - wren_b : IN STD_LOGIC := '0'; - q_a : OUT STD_LOGIC_VECTOR (31 DOWNTO 0); - q_b : OUT STD_LOGIC_VECTOR (31 DOWNTO 0) - ); -END generic_seq_ram_15; - - -ARCHITECTURE SYN OF generic_seq_ram_15 IS - - SIGNAL sub_wire0 : STD_LOGIC_VECTOR (31 DOWNTO 0); - SIGNAL sub_wire1 : STD_LOGIC_VECTOR (31 DOWNTO 0); - -BEGIN - q_a <= sub_wire0(31 DOWNTO 0); - q_b <= sub_wire1(31 DOWNTO 0); - - altsyncram_component : altsyncram - GENERIC MAP ( - address_reg_b => "CLOCK0", - clock_enable_input_a => "BYPASS", - clock_enable_input_b => "BYPASS", - clock_enable_output_a => "BYPASS", - clock_enable_output_b => "BYPASS", - indata_reg_b => "CLOCK0", - intended_device_family => "Cyclone V", - lpm_type => "altsyncram", - numwords_a => SEQ_DEPTH, - numwords_b => SEQ_DEPTH, - operation_mode => "BIDIR_DUAL_PORT", - outdata_aclr_a => "NONE", - outdata_aclr_b => "NONE", - outdata_reg_a => "UNREGISTERED", - outdata_reg_b => "UNREGISTERED", - power_up_uninitialized => "FALSE", - read_during_write_mode_mixed_ports => "OLD_DATA", - read_during_write_mode_port_a => "NEW_DATA_NO_NBE_READ", - read_during_write_mode_port_b => "NEW_DATA_NO_NBE_READ", - widthad_a => log2(SEQ_DEPTH), - widthad_b => log2(SEQ_DEPTH), - width_a => 32, - width_b => 32, - width_byteena_a => 1, - width_byteena_b => 1, - wrcontrol_wraddress_reg_b => "CLOCK0" - ) - PORT MAP ( - address_a => address_a, - address_b => address_b, - clock0 => clock, - data_a => data_a, - data_b => data_b, - wren_a => wren_a, - wren_b => wren_b, - q_a => sub_wire0, - q_b => sub_wire1 - ); - - - -END SYN; - --- ============================================================ --- CNX file retrieval info --- ============================================================ --- Retrieval info: PRIVATE: ADDRESSSTALL_A NUMERIC "0" --- Retrieval info: PRIVATE: ADDRESSSTALL_B NUMERIC "0" --- Retrieval info: PRIVATE: BYTEENA_ACLR_A NUMERIC "0" --- Retrieval info: PRIVATE: BYTEENA_ACLR_B NUMERIC "0" --- Retrieval info: PRIVATE: BYTE_ENABLE_A NUMERIC "0" --- Retrieval info: PRIVATE: BYTE_ENABLE_B NUMERIC "0" --- Retrieval info: PRIVATE: BYTE_SIZE NUMERIC "8" --- Retrieval info: PRIVATE: BlankMemory NUMERIC "1" --- Retrieval info: PRIVATE: CLOCK_ENABLE_INPUT_A NUMERIC "0" --- Retrieval info: PRIVATE: CLOCK_ENABLE_INPUT_B NUMERIC "0" --- Retrieval info: PRIVATE: CLOCK_ENABLE_OUTPUT_A NUMERIC "0" --- Retrieval info: PRIVATE: CLOCK_ENABLE_OUTPUT_B NUMERIC "0" --- Retrieval info: PRIVATE: CLRdata NUMERIC "0" --- Retrieval info: PRIVATE: CLRq NUMERIC "0" --- Retrieval info: PRIVATE: CLRrdaddress NUMERIC "0" --- Retrieval info: PRIVATE: CLRrren NUMERIC "0" --- Retrieval info: PRIVATE: CLRwraddress NUMERIC "0" --- Retrieval info: PRIVATE: CLRwren NUMERIC "0" --- Retrieval info: PRIVATE: Clock NUMERIC "0" --- Retrieval info: PRIVATE: Clock_A NUMERIC "0" --- Retrieval info: PRIVATE: Clock_B NUMERIC "0" --- Retrieval info: PRIVATE: IMPLEMENT_IN_LES NUMERIC "0" --- Retrieval info: PRIVATE: INDATA_ACLR_B NUMERIC "0" --- Retrieval info: PRIVATE: INDATA_REG_B NUMERIC "1" --- Retrieval info: PRIVATE: INIT_FILE_LAYOUT STRING "PORT_A" --- Retrieval info: PRIVATE: INIT_TO_SIM_X NUMERIC "0" --- Retrieval info: PRIVATE: INTENDED_DEVICE_FAMILY STRING "Cyclone V" --- Retrieval info: PRIVATE: JTAG_ENABLED NUMERIC "0" --- Retrieval info: PRIVATE: JTAG_ID STRING "NONE" --- Retrieval info: PRIVATE: MAXIMUM_DEPTH NUMERIC "0" --- Retrieval info: PRIVATE: MEMSIZE NUMERIC "8192" --- Retrieval info: PRIVATE: MEM_IN_BITS NUMERIC "0" --- Retrieval info: PRIVATE: MIFfilename STRING "" --- Retrieval info: PRIVATE: OPERATION_MODE NUMERIC "3" --- Retrieval info: PRIVATE: OUTDATA_ACLR_B NUMERIC "0" --- Retrieval info: PRIVATE: OUTDATA_REG_B NUMERIC "0" --- Retrieval info: PRIVATE: RAM_BLOCK_TYPE NUMERIC "0" --- Retrieval info: PRIVATE: READ_DURING_WRITE_MODE_MIXED_PORTS NUMERIC "2" --- Retrieval info: PRIVATE: READ_DURING_WRITE_MODE_PORT_A NUMERIC "3" --- Retrieval info: PRIVATE: READ_DURING_WRITE_MODE_PORT_B NUMERIC "3" --- Retrieval info: PRIVATE: REGdata NUMERIC "1" --- Retrieval info: PRIVATE: REGq NUMERIC "0" --- Retrieval info: PRIVATE: REGrdaddress NUMERIC "0" --- Retrieval info: PRIVATE: REGrren NUMERIC "0" --- Retrieval info: PRIVATE: REGwraddress NUMERIC "1" --- Retrieval info: PRIVATE: REGwren NUMERIC "1" --- Retrieval info: PRIVATE: SYNTH_WRAPPER_GEN_POSTFIX STRING "0" --- Retrieval info: PRIVATE: USE_DIFF_CLKEN NUMERIC "0" --- Retrieval info: PRIVATE: UseDPRAM NUMERIC "1" --- Retrieval info: PRIVATE: VarWidth NUMERIC "0" --- Retrieval info: PRIVATE: WIDTH_READ_A NUMERIC "32" --- Retrieval info: PRIVATE: WIDTH_READ_B NUMERIC "32" --- Retrieval info: PRIVATE: WIDTH_WRITE_A NUMERIC "32" --- Retrieval info: PRIVATE: WIDTH_WRITE_B NUMERIC "32" --- Retrieval info: PRIVATE: WRADDR_ACLR_B NUMERIC "0" --- Retrieval info: PRIVATE: WRADDR_REG_B NUMERIC "1" --- Retrieval info: PRIVATE: WRCTRL_ACLR_B NUMERIC "0" --- Retrieval info: PRIVATE: enable NUMERIC "0" --- Retrieval info: PRIVATE: rden NUMERIC "0" --- Retrieval info: LIBRARY: altera_mf altera_mf.altera_mf_components.all --- Retrieval info: CONSTANT: ADDRESS_REG_B STRING "CLOCK0" --- Retrieval info: CONSTANT: CLOCK_ENABLE_INPUT_A STRING "BYPASS" --- Retrieval info: CONSTANT: CLOCK_ENABLE_INPUT_B STRING "BYPASS" --- Retrieval info: CONSTANT: CLOCK_ENABLE_OUTPUT_A STRING "BYPASS" --- Retrieval info: CONSTANT: CLOCK_ENABLE_OUTPUT_B STRING "BYPASS" --- Retrieval info: CONSTANT: INDATA_REG_B STRING "CLOCK0" --- Retrieval info: CONSTANT: INTENDED_DEVICE_FAMILY STRING "Cyclone V" --- Retrieval info: CONSTANT: LPM_TYPE STRING "altsyncram" --- Retrieval info: CONSTANT: NUMWORDS_A NUMERIC "256" --- Retrieval info: CONSTANT: NUMWORDS_B NUMERIC "256" --- Retrieval info: CONSTANT: OPERATION_MODE STRING "BIDIR_DUAL_PORT" --- Retrieval info: CONSTANT: OUTDATA_ACLR_A STRING "NONE" --- Retrieval info: CONSTANT: OUTDATA_ACLR_B STRING "NONE" --- Retrieval info: CONSTANT: OUTDATA_REG_A STRING "UNREGISTERED" --- Retrieval info: CONSTANT: OUTDATA_REG_B STRING "UNREGISTERED" --- Retrieval info: CONSTANT: POWER_UP_UNINITIALIZED STRING "FALSE" --- Retrieval info: CONSTANT: READ_DURING_WRITE_MODE_MIXED_PORTS STRING "DONT_CARE" --- Retrieval info: CONSTANT: READ_DURING_WRITE_MODE_PORT_A STRING "NEW_DATA_NO_NBE_READ" --- Retrieval info: CONSTANT: READ_DURING_WRITE_MODE_PORT_B STRING "NEW_DATA_NO_NBE_READ" --- Retrieval info: CONSTANT: WIDTHAD_A NUMERIC "8" --- Retrieval info: CONSTANT: WIDTHAD_B NUMERIC "8" --- Retrieval info: CONSTANT: WIDTH_A NUMERIC "32" --- Retrieval info: CONSTANT: WIDTH_B NUMERIC "32" --- Retrieval info: CONSTANT: WIDTH_BYTEENA_A NUMERIC "1" --- Retrieval info: CONSTANT: WIDTH_BYTEENA_B NUMERIC "1" --- Retrieval info: CONSTANT: WRCONTROL_WRADDRESS_REG_B STRING "CLOCK0" --- Retrieval info: USED_PORT: address_a 0 0 8 0 INPUT NODEFVAL "address_a[7..0]" --- Retrieval info: USED_PORT: address_b 0 0 8 0 INPUT NODEFVAL "address_b[7..0]" --- Retrieval info: USED_PORT: clock 0 0 0 0 INPUT VCC "clock" --- Retrieval info: USED_PORT: data_a 0 0 32 0 INPUT NODEFVAL "data_a[31..0]" --- Retrieval info: USED_PORT: data_b 0 0 32 0 INPUT NODEFVAL "data_b[31..0]" --- Retrieval info: USED_PORT: q_a 0 0 32 0 OUTPUT NODEFVAL "q_a[31..0]" --- Retrieval info: USED_PORT: q_b 0 0 32 0 OUTPUT NODEFVAL "q_b[31..0]" --- Retrieval info: USED_PORT: wren_a 0 0 0 0 INPUT GND "wren_a" --- Retrieval info: USED_PORT: wren_b 0 0 0 0 INPUT GND "wren_b" --- Retrieval info: CONNECT: @address_a 0 0 8 0 address_a 0 0 8 0 --- Retrieval info: CONNECT: @address_b 0 0 8 0 address_b 0 0 8 0 --- Retrieval info: CONNECT: @clock0 0 0 0 0 clock 0 0 0 0 --- Retrieval info: CONNECT: @data_a 0 0 32 0 data_a 0 0 32 0 --- Retrieval info: CONNECT: @data_b 0 0 32 0 data_b 0 0 32 0 --- Retrieval info: CONNECT: @wren_a 0 0 0 0 wren_a 0 0 0 0 --- Retrieval info: CONNECT: @wren_b 0 0 0 0 wren_b 0 0 0 0 --- Retrieval info: CONNECT: q_a 0 0 32 0 @q_a 0 0 32 0 --- Retrieval info: CONNECT: q_b 0 0 32 0 @q_b 0 0 32 0 --- Retrieval info: GEN_FILE: TYPE_NORMAL generic_seq_ram.vhd TRUE --- Retrieval info: GEN_FILE: TYPE_NORMAL generic_seq_ram.inc FALSE --- Retrieval info: GEN_FILE: TYPE_NORMAL generic_seq_ram.cmp TRUE --- Retrieval info: GEN_FILE: TYPE_NORMAL generic_seq_ram.bsf FALSE --- Retrieval info: GEN_FILE: TYPE_NORMAL generic_seq_ram_inst.vhd FALSE --- Retrieval info: LIB_FILE: altera_mf diff --git a/generic_ip/pof_protocol/1/sim/wave_pof_txrx.do b/generic_ip/pof_protocol/1/sim/wave_pof_txrx.do index 1966f06..48dbb28 100644 --- a/generic_ip/pof_protocol/1/sim/wave_pof_txrx.do +++ b/generic_ip/pof_protocol/1/sim/wave_pof_txrx.do @@ -1,87 +1,89 @@ onerror {resume} quietly WaveActivateNextPane {} 0 -add wave -noupdate -expand -group TB /pof_tx_rx_1_tb/clk -add wave -noupdate -expand -group TB /pof_tx_rx_1_tb/reset_n -add wave -noupdate -expand -group TB /pof_tx_rx_1_tb/avs_read -add wave -noupdate -expand -group TB /pof_tx_rx_1_tb/avs_write -add wave -noupdate -expand -group TB /pof_tx_rx_1_tb/sel_slave_0 -add wave -noupdate -expand -group TB /pof_tx_rx_1_tb/sel_slave_1 -add wave -noupdate -expand -group TB /pof_tx_rx_1_tb/avs_write_sl0 -add wave -noupdate -expand -group TB /pof_tx_rx_1_tb/avs_read_sl0 -add wave -noupdate -expand -group TB /pof_tx_rx_1_tb/avs_readdatavalid_sl0 -add wave -noupdate -expand -group TB /pof_tx_rx_1_tb/avs_write_sl1 -add wave -noupdate -expand -group TB /pof_tx_rx_1_tb/avs_read_sl1 -add wave -noupdate -expand -group TB /pof_tx_rx_1_tb/avs_readdatavalid_sl1 -add wave -noupdate -expand -group TB /pof_tx_rx_1_tb/init_tx -add wave -noupdate -expand -group TB /pof_tx_rx_1_tb/init_rx -add wave -noupdate -expand -group TB /pof_tx_rx_1_tb/dir_in -add wave -noupdate -expand -group TB /pof_tx_rx_1_tb/pd_in -add wave -noupdate -expand -group TB /pof_tx_rx_1_tb/inc_pos -add wave -noupdate -expand -group TB /pof_tx_rx_1_tb/dec_pos -add wave -noupdate -expand -group TB -radix decimal /pof_tx_rx_1_tb/abs_position -add wave -noupdate -expand -group TB /pof_tx_rx_1_tb/tx_data -add wave -noupdate -expand -group TB /pof_tx_rx_1_tb/rx_data -add wave -noupdate -expand -group TB /pof_tx_rx_1_tb/init_out -add wave -noupdate -expand -group TB /pof_tx_rx_1_tb/dir_out -add wave -noupdate -expand -group TB /pof_tx_rx_1_tb/enc_out -add wave -noupdate -expand -group TB /pof_tx_rx_1_tb/pd_out -add wave -noupdate -expand -group TB /pof_tx_rx_1_tb/inc_pos_out -add wave -noupdate -expand -group TB /pof_tx_rx_1_tb/dec_pos_out -add wave -noupdate -expand -group TB -radix decimal /pof_tx_rx_1_tb/abs_pos_out -add wave -noupdate -expand -group TB /pof_tx_rx_1_tb/print_start_in -add wave -noupdate -expand -group TB /pof_tx_rx_1_tb/print_start_out -add wave -noupdate -expand -group TB /pof_tx_rx_1_tb/ps_flip_cnt -add wave -noupdate -expand -group TB /pof_tx_rx_1_tb/test_completed -add wave -noupdate -expand -group TB /pof_tx_rx_1_tb/running -add wave -noupdate -expand -group TB /pof_tx_rx_1_tb/configuring -add wave -noupdate -expand -group TB /pof_tx_rx_1_tb/passed -add wave -noupdate -expand -group TB /pof_tx_rx_1_tb/failed -add wave -noupdate -expand -group TB /pof_tx_rx_1_tb/stimuli_completed -add wave -noupdate -expand -group TB /pof_tx_rx_1_tb/avs_address -add wave -noupdate -expand -group TB -radix hexadecimal /pof_tx_rx_1_tb/avs_writedata -add wave -noupdate -expand -group TB -radix hexadecimal /pof_tx_rx_1_tb/avs_readdata_sl0 -add wave -noupdate -expand -group TB -radix hexadecimal /pof_tx_rx_1_tb/avs_readdata_sl1 -add wave -noupdate -expand -group TB -radix decimal /pof_tx_rx_1_tb/abs_position_d -add wave -noupdate -expand -group TB -radix decimal /pof_tx_rx_1_tb/swathe_pos -add wave -noupdate -expand -group TB /pof_tx_rx_1_tb/swathe_cnt -add wave -noupdate -expand -group TB -radix hexadecimal /pof_tx_rx_1_tb/avs_m -add wave -noupdate -expand -group TB -radix hexadecimal /pof_tx_rx_1_tb/avs_s -add wave -noupdate -expand -group TB /pof_tx_rx_1_tb/detected_error -add wave -noupdate -expand -group TB /pof_tx_rx_1_tb/dir_discr_cnt -add wave -noupdate -expand -group TB /pof_tx_rx_1_tb/pd_discr_cnt -add wave -noupdate -expand -group TB /pof_tx_rx_1_tb/pd_in_cnt -add wave -noupdate -expand -group TB /pof_tx_rx_1_tb/pd_out_cnt -add wave -noupdate -expand -group TB -radix decimal /pof_tx_rx_1_tb/abs_position -add wave -noupdate -expand -group TB -radix decimal /pof_tx_rx_1_tb/abs_pos_out -add wave -noupdate -expand -group TB /pof_tx_rx_1_tb/pos_discr_cnt -add wave -noupdate -expand -group TB /pof_tx_rx_1_tb/end_of_swathe -add wave -noupdate -expand -group TB /pof_tx_rx_1_tb/enc_pulse_cnt -add wave -noupdate -expand -group TB /pof_tx_rx_1_tb/dir_err -add wave -noupdate -expand -group TB /pof_tx_rx_1_tb/pd_err -add wave -noupdate -expand -group TB /pof_tx_rx_1_tb/pos_err -add wave -noupdate -expand -group TB /pof_tx_rx_1_tb/enc_err -add wave -noupdate -expand -group TB /pof_tx_rx_1_tb/ovfl_err -add wave -noupdate -expand -group TB /pof_tx_rx_1_tb/ps_err -add wave -noupdate -expand -group TB /pof_tx_rx_1_tb/injected_errors -add wave -noupdate -expand -group TB /pof_tx_rx_1_tb/sent_packets -add wave -noupdate -expand -group TB /pof_tx_rx_1_tb/injected_error_type -add wave -noupdate -expand -group TB /pof_tx_rx_1_tb/max_pos -add wave -noupdate -expand -group TB /pof_tx_rx_1_tb/min_pos -add wave -noupdate -expand -group TB /pof_tx_rx_1_tb/exp_enc_pulse -add wave -noupdate -expand -group TB /pof_tx_rx_1_tb/exp_enc_cnt -add wave -noupdate -expand -group TB /pof_tx_rx_1_tb/error_rate_thres -add wave -noupdate -expand -group TB /pof_tx_rx_1_tb/one_pps -add wave -noupdate -expand -group TB /pof_tx_rx_1_tb/max_error_flag -add wave -noupdate -expand -group TB /pof_tx_rx_1_tb/rx_watchdog -add wave -noupdate -expand -group TB /pof_tx_rx_1_tb/rx_watchdog_en -add wave -noupdate -expand -group TB /pof_tx_rx_1_tb/rx_watchdog_clr +add wave -noupdate /pof_tx_rx_1_tb/pos_discr_cnt +add wave -noupdate -group TB /pof_tx_rx_1_tb/clk +add wave -noupdate -group TB /pof_tx_rx_1_tb/reset_n +add wave -noupdate -group TB /pof_tx_rx_1_tb/avs_read +add wave -noupdate -group TB /pof_tx_rx_1_tb/avs_write +add wave -noupdate -group TB /pof_tx_rx_1_tb/sel_slave_0 +add wave -noupdate -group TB /pof_tx_rx_1_tb/sel_slave_1 +add wave -noupdate -group TB /pof_tx_rx_1_tb/avs_write_sl0 +add wave -noupdate -group TB /pof_tx_rx_1_tb/avs_read_sl0 +add wave -noupdate -group TB /pof_tx_rx_1_tb/avs_readdatavalid_sl0 +add wave -noupdate -group TB /pof_tx_rx_1_tb/avs_write_sl1 +add wave -noupdate -group TB /pof_tx_rx_1_tb/avs_read_sl1 +add wave -noupdate -group TB /pof_tx_rx_1_tb/avs_readdatavalid_sl1 +add wave -noupdate -group TB /pof_tx_rx_1_tb/init_tx +add wave -noupdate -group TB /pof_tx_rx_1_tb/init_rx +add wave -noupdate -group TB /pof_tx_rx_1_tb/dir_in +add wave -noupdate -group TB /pof_tx_rx_1_tb/pd_in +add wave -noupdate -group TB /pof_tx_rx_1_tb/inc_pos +add wave -noupdate -group TB /pof_tx_rx_1_tb/dec_pos +add wave -noupdate -group TB -radix decimal /pof_tx_rx_1_tb/abs_position +add wave -noupdate -group TB /pof_tx_rx_1_tb/tx_data +add wave -noupdate -group TB /pof_tx_rx_1_tb/rx_data +add wave -noupdate -group TB /pof_tx_rx_1_tb/init_out +add wave -noupdate -group TB /pof_tx_rx_1_tb/dir_out +add wave -noupdate -group TB /pof_tx_rx_1_tb/enc_out +add wave -noupdate -group TB /pof_tx_rx_1_tb/pd_out +add wave -noupdate -group TB /pof_tx_rx_1_tb/inc_pos_out +add wave -noupdate -group TB /pof_tx_rx_1_tb/dec_pos_out +add wave -noupdate -group TB -radix decimal /pof_tx_rx_1_tb/abs_pos_out +add wave -noupdate -group TB /pof_tx_rx_1_tb/print_start_in +add wave -noupdate -group TB /pof_tx_rx_1_tb/print_start_out +add wave -noupdate -group TB /pof_tx_rx_1_tb/ps_flip_cnt +add wave -noupdate -group TB /pof_tx_rx_1_tb/test_completed +add wave -noupdate -group TB /pof_tx_rx_1_tb/running +add wave -noupdate -group TB /pof_tx_rx_1_tb/configuring +add wave -noupdate -group TB /pof_tx_rx_1_tb/passed +add wave -noupdate -group TB /pof_tx_rx_1_tb/failed +add wave -noupdate -group TB /pof_tx_rx_1_tb/stimuli_completed +add wave -noupdate -group TB /pof_tx_rx_1_tb/avs_address +add wave -noupdate -group TB -radix hexadecimal /pof_tx_rx_1_tb/avs_writedata +add wave -noupdate -group TB -radix hexadecimal /pof_tx_rx_1_tb/avs_readdata_sl0 +add wave -noupdate -group TB -radix hexadecimal /pof_tx_rx_1_tb/avs_readdata_sl1 +add wave -noupdate -group TB -radix decimal /pof_tx_rx_1_tb/abs_position_d +add wave -noupdate -group TB -radix decimal /pof_tx_rx_1_tb/swathe_pos +add wave -noupdate -group TB /pof_tx_rx_1_tb/swathe_cnt +add wave -noupdate -group TB -radix hexadecimal /pof_tx_rx_1_tb/avs_m +add wave -noupdate -group TB -radix hexadecimal /pof_tx_rx_1_tb/avs_s +add wave -noupdate -group TB /pof_tx_rx_1_tb/detected_error +add wave -noupdate -group TB /pof_tx_rx_1_tb/dir_discr_cnt +add wave -noupdate -group TB /pof_tx_rx_1_tb/pd_discr_cnt +add wave -noupdate -group TB /pof_tx_rx_1_tb/pd_in_cnt +add wave -noupdate -group TB /pof_tx_rx_1_tb/pd_out_cnt +add wave -noupdate -group TB -radix decimal /pof_tx_rx_1_tb/abs_position +add wave -noupdate -group TB -radix decimal /pof_tx_rx_1_tb/abs_pos_out +add wave -noupdate -group TB /pof_tx_rx_1_tb/end_of_swathe +add wave -noupdate -group TB /pof_tx_rx_1_tb/enc_pulse_cnt +add wave -noupdate -group TB /pof_tx_rx_1_tb/dir_err +add wave -noupdate -group TB /pof_tx_rx_1_tb/pd_err +add wave -noupdate -group TB /pof_tx_rx_1_tb/pos_err +add wave -noupdate -group TB /pof_tx_rx_1_tb/enc_err +add wave -noupdate -group TB /pof_tx_rx_1_tb/ovfl_err +add wave -noupdate -group TB /pof_tx_rx_1_tb/ps_err +add wave -noupdate -group TB /pof_tx_rx_1_tb/injected_errors +add wave -noupdate -group TB /pof_tx_rx_1_tb/sent_packets +add wave -noupdate -group TB /pof_tx_rx_1_tb/injected_error_type +add wave -noupdate -group TB /pof_tx_rx_1_tb/max_pos +add wave -noupdate -group TB /pof_tx_rx_1_tb/min_pos +add wave -noupdate -group TB /pof_tx_rx_1_tb/exp_enc_pulse +add wave -noupdate -group TB /pof_tx_rx_1_tb/exp_enc_cnt +add wave -noupdate -group TB /pof_tx_rx_1_tb/error_rate_thres +add wave -noupdate -group TB /pof_tx_rx_1_tb/one_pps +add wave -noupdate -group TB /pof_tx_rx_1_tb/max_error_flag +add wave -noupdate -group TB /pof_tx_rx_1_tb/rx_watchdog +add wave -noupdate -group TB /pof_tx_rx_1_tb/rx_watchdog_en +add wave -noupdate -group TB /pof_tx_rx_1_tb/rx_watchdog_clr +add wave -noupdate /pof_tx_rx_1_tb/iPOF_TX/init +add wave -noupdate /pof_tx_rx_1_tb/iPOF_TX/init_blocked +add wave -noupdate -radix decimal /pof_tx_rx_1_tb/iPOF_TX/abs_position add wave -noupdate -group POF-Tx /pof_tx_rx_1_tb/iPOF_TX/reset_n add wave -noupdate -group POF-Tx /pof_tx_rx_1_tb/iPOF_TX/clk add wave -noupdate -group POF-Tx /pof_tx_rx_1_tb/iPOF_TX/init add wave -noupdate -group POF-Tx /pof_tx_rx_1_tb/iPOF_TX/pd_in add wave -noupdate -group POF-Tx /pof_tx_rx_1_tb/iPOF_TX/inc_pos add wave -noupdate -group POF-Tx /pof_tx_rx_1_tb/iPOF_TX/dec_pos -add wave -noupdate -group POF-Tx -radix decimal /pof_tx_rx_1_tb/iPOF_TX/abs_position add wave -noupdate -group POF-Tx /pof_tx_rx_1_tb/iPOF_TX/tx_data add wave -noupdate -group POF-Tx /pof_tx_rx_1_tb/iPOF_TX/avs_address add wave -noupdate -group POF-Tx /pof_tx_rx_1_tb/iPOF_TX/avs_write @@ -104,7 +106,6 @@ add wave -noupdate -group POF-Tx /pof_tx_rx_1_tb/iPOF_TX/ovfl_err add wave -noupdate -group POF-Tx /pof_tx_rx_1_tb/iPOF_TX/init_d add wave -noupdate -group POF-Tx /pof_tx_rx_1_tb/iPOF_TX/init_gen add wave -noupdate -group POF-Tx /pof_tx_rx_1_tb/iPOF_TX/init_v -add wave -noupdate -group POF-Tx /pof_tx_rx_1_tb/iPOF_TX/init_blocked add wave -noupdate -group POF-Tx /pof_tx_rx_1_tb/iPOF_TX/init_blk_cnt add wave -noupdate -group POF-Tx /pof_tx_rx_1_tb/iPOF_TX/parity_bit add wave -noupdate -group POF-Tx /pof_tx_rx_1_tb/iPOF_TX/inject_error @@ -129,16 +130,16 @@ add wave -noupdate -group POF-Tx /pof_tx_rx_1_tb/iPOF_TX/event_in_i add wave -noupdate -group POF-Tx /pof_tx_rx_1_tb/iPOF_TX/event_in add wave -noupdate -group POF-Tx /pof_tx_rx_1_tb/iPOF_TX/event_out add wave -noupdate -group POF-Tx -radix decimal /pof_tx_rx_1_tb/iPOF_TX/keepalive_cnt +add wave -noupdate /pof_tx_rx_1_tb/iPOF_RX/init_out +add wave -noupdate -radix decimal /pof_tx_rx_1_tb/iPOF_RX/abs_pos add wave -noupdate -group POF-Rx /pof_tx_rx_1_tb/iPOF_RX/reset_n add wave -noupdate -group POF-Rx /pof_tx_rx_1_tb/iPOF_RX/clk add wave -noupdate -group POF-Rx /pof_tx_rx_1_tb/iPOF_RX/init add wave -noupdate -group POF-Rx /pof_tx_rx_1_tb/iPOF_RX/rx_clk add wave -noupdate -group POF-Rx /pof_tx_rx_1_tb/iPOF_RX/rx_data -add wave -noupdate -group POF-Rx /pof_tx_rx_1_tb/iPOF_RX/init_out add wave -noupdate -group POF-Rx /pof_tx_rx_1_tb/iPOF_RX/pd_out add wave -noupdate -group POF-Rx /pof_tx_rx_1_tb/iPOF_RX/inc_pos add wave -noupdate -group POF-Rx /pof_tx_rx_1_tb/iPOF_RX/dec_pos -add wave -noupdate -group POF-Rx -radix decimal /pof_tx_rx_1_tb/iPOF_RX/abs_pos add wave -noupdate -group POF-Rx /pof_tx_rx_1_tb/print_start_out add wave -noupdate -group POF-Rx -radix unsigned /pof_tx_rx_1_tb/iPOF_RX/error_rate_thres add wave -noupdate -group POF-Rx /pof_tx_rx_1_tb/iPOF_RX/one_pps @@ -211,9 +212,10 @@ add wave -noupdate -group POF-Rx /pof_tx_rx_1_tb/iPOF_RX/iRX_SYMBOL/data_out_val add wave -noupdate -group POF-Rx /pof_tx_rx_1_tb/iPOF_RX/iRX_SYMBOL/rx_data add wave -noupdate -group POF-Rx /pof_tx_rx_1_tb/iPOF_RX/iRX_SYMBOL/rx_data_i add wave -noupdate -group POF-Rx /pof_tx_rx_1_tb/iPOF_RX/iRX_SYMBOL/data +add wave -noupdate /pof_tx_rx_1_tb/iPOF_TX/init_blocked TreeUpdate [SetDefaultTree] -WaveRestoreCursors {{Cursor 1} {1338555000 ps} 0} -quietly wave cursor active 1 +WaveRestoreCursors {{Cursor 1} {6005000 ps} 0} {{Cursor 2} {5595000 ps} 0} {{Cursor 3} {4135000 ps} 0} +quietly wave cursor active 3 configure wave -namecolwidth 305 configure wave -valuecolwidth 100 configure wave -justifyvalue left @@ -228,4 +230,4 @@ configure wave -griddelta 40 configure wave -timeline 0 configure wave -timelineunits ps update -WaveRestoreZoom {4636240802 ps} {7857466274 ps} +WaveRestoreZoom {0 ps} {8368238 ps} diff --git a/generic_ip/pof_protocol/1/src/test/pof_tx_rx_1_tb.vhd b/generic_ip/pof_protocol/1/src/test/pof_tx_rx_1_tb.vhd index 2b119f3..e64b9b4 100644 --- a/generic_ip/pof_protocol/1/src/test/pof_tx_rx_1_tb.vhd +++ b/generic_ip/pof_protocol/1/src/test/pof_tx_rx_1_tb.vhd @@ -46,12 +46,12 @@ architecture behav of pof_tx_rx_1_tb is constant UART_BIT_DIV : integer := 6; -- divide by 6 - constant SYMBOL_LEN : natural := 8; -- UART symbol length, excluding - -- start/stop and parity bits + constant SYMBOL_LEN : natural := 8; -- UART symbol length, excluding + -- start/stop and parity bits -- Print-Start toggling period constant PS_SWITCH_PER : natural := 5000; - + type injected_error_t is (DATA_ERROR, START_BIT_ERROR, STOP_BIT_ERROR); @@ -66,13 +66,13 @@ architecture behav of pof_tx_rx_1_tb is signal tx_data, rx_data, init_out, dir_out : std_logic; signal pd_out, inc_pos_out, dec_pos_out, end_of_swathe : std_logic; signal print_start_in, print_start_out : std_logic; - signal ps_flip_cnt : natural := 0; + signal ps_flip_cnt : natural := 0; -- signal test_completed, running, configuring : boolean; signal passed, failed, stimuli_completed : boolean; signal detected_error : boolean := false; -- - signal avs_address : std_logic_vector( 2 downto 0); + signal avs_address : std_logic_vector(2 downto 0); signal avs_writedata : std_logic_vector(31 downto 0); signal avs_readdata_sl0, avs_readdata_sl1 : std_logic_vector(31 downto 0); signal abs_position, abs_position_d : std_logic_vector(31 downto 0); @@ -141,7 +141,7 @@ begin -- architecture behav iPOF_RX : entity work.pof_rx_1 generic map( - GEN_BIT_DIV => UART_BIT_DIV) + GEN_BIT_DIV => UART_BIT_DIV) port map( reset_n => reset_n, clk => clk, @@ -267,15 +267,15 @@ begin -- architecture behav pSTIMULI_REGs : process(clk) begin - if(reset_n = '0') then + if (reset_n = '0') then abs_position_d <= (others => '0'); print_start_in <= '0'; ps_flip_cnt <= 0; - elsif(clk = '1' and clk'event) then + elsif (clk = '1' and clk'event) then abs_position_d <= abs_position; - if(running = true) then - if(ps_flip_cnt = PS_SWITCH_PER-1) then - ps_flip_cnt <= 0; + if (running = true) then + if (ps_flip_cnt = PS_SWITCH_PER - 1) then + ps_flip_cnt <= 0; print_start_in <= not print_start_in; else ps_flip_cnt <= ps_flip_cnt + 1; @@ -341,7 +341,7 @@ begin -- architecture behav wait until clk = '1' and clk'event; while swathe_pos /= SWATHE_LEN loop -- generate a position increment - tmp_int := rv.RandInt(1, 100); + tmp_int := rv.RandInt(1, 100); --tmp_int := 100; if (tmp_int < 20) then -- generate a position increment opposite to the swathe direction @@ -360,7 +360,7 @@ begin -- architecture behav end if; end if; -- - tmp_int := rv.RandInt(1, 100); + tmp_int := rv.RandInt(1, 100); if (tmp_int <= 5 and pd_dist >= 10) then pd_dist := 0; -- generate a PD increment: the PD might be either concurrent or not @@ -377,9 +377,9 @@ begin -- architecture behav wait until clk = '1' and clk'event; when others => null; end case; - pd_in <= '1'; + pd_in <= '1'; wait until clk = '1' and clk'event; - pd_in <= '0'; + pd_in <= '0'; end if; pd_dist := pd_dist + 1; rand_time := rv.RandInt(-25, 25) * (10 ns); @@ -448,7 +448,7 @@ begin -- architecture behav begin sent_packets <= 0; injected_errors <= 0; - last_inj_err := 0; + last_inj_err := 0; if (running /= true) then wait until running = true; end if; @@ -456,30 +456,30 @@ begin -- architecture behav while running loop wait until symbol_valid = '1' and symbol_valid'event; sent_packets <= sent_packets + 1; - if(last_inj_err > 0) then + if (last_inj_err > 0) then last_inj_err := last_inj_err - 1; end if; - if (last_inj_err = 0 and rv.RandInt(1, 10000) < integer(INJECT_ERROR_PERC*100.0)) then + if (last_inj_err = 0 and rv.RandInt(1, 10000) < integer(INJECT_ERROR_PERC * 100.0)) then -- Select the type of error to inject: The error type distribution is -- as follows: -- 80% of data errors, including errors on the parity-bit -- 10% of start-bit errors -- 10% of stop-bit errors last_inj_err := 5; - et_sel := rv_et.RandInt(1, 100); - if(et_sel < 80) then + et_sel := rv_et.RandInt(1, 100); + if (et_sel < 80) then injected_error_type <= DATA_ERROR; -- Inject an error: -- Number of bits to flip in the tx word - bit_flips := rv.RandInt(1, 3); + bit_flips := rv.RandInt(1, 3); --bit_flips := 2; - b0 := rv.RandInt(0, SYMBOL_LEN); - exclude_1(0) := b0; - b1 := rv.RandInt(min => 0, max => SYMBOL_LEN, exclude => exclude_1); - exclude_2 := (0 => b0, 1 => b1); - b2 := rv.RandInt(min => 0, max => SYMBOL_LEN, exclude => exclude_2); - flip_vect := (others => '0'); - flip_vect(b0) := '1'; + b0 := rv.RandInt(0, SYMBOL_LEN); + exclude_1(0) := b0; + b1 := rv.RandInt(min => 0, max => SYMBOL_LEN, exclude => exclude_1); + exclude_2 := (0 => b0, 1 => b1); + b2 := rv.RandInt(min => 0, max => SYMBOL_LEN, exclude => exclude_2); + flip_vect := (others => '0'); + flip_vect(b0) := '1'; if (bit_flips >= 2) then flip_vect(b1) := '1'; end if; @@ -491,44 +491,45 @@ begin -- architecture behav flip_vect := (others => '0'); end if; log("bit-flip = " & to_string(bit_flips) & ", flip_vect = " & to_string(flip_vect) & ".", VLOW); - symbol <= force symbol xor flip_vect; - injected_errors <= injected_errors + 1; + symbol <= force symbol xor flip_vect; + injected_errors <= injected_errors + 1; wait until clk = '1' and clk'event; wait until clk = '1' and clk'event; - symbol <= release; - last_flip := flip_vect; - - elsif(et_sel < 90) then - last_flip := (others => '0'); + symbol <= release; + last_flip := flip_vect; + + elsif (et_sel < 90) then + last_flip := (others => '0'); injected_error_type <= START_BIT_ERROR; -- Directly force tx_data to low for some time - sbe_len := rv_et.RandInt(3, 10); - injected_errors <= injected_errors + 1; + -- goes low one clock cycle (i.e. half a "bit") early and stays there while the shifting continues + sbe_len := 2; + injected_errors <= injected_errors + 1; log("Injected error on the UART Start-Bit.", VLOW); - tx_data <= force '0'; + tx_data <= force '0'; for i in 1 to sbe_len loop wait until clk = '1' and clk'event; - end loop; -- i - tx_data <= release; + end loop; -- i + tx_data <= release; else - last_flip := (others => '0'); + last_flip := (others => '0'); injected_error_type <= STOP_BIT_ERROR; -- To create an error on the UART stop-bit, force to zero the signal -- used to switch tx_data to high, at the end of the message uart_tx_set_tx_data <= force '0'; - sbe_len := rv_et.RandInt(20, 25); + sbe_len := 22; for i in 1 to sbe_len loop wait until clk = '1' and clk'event; - end loop; -- i + end loop; -- i -- issue the stop bit uart_tx_set_tx_data <= force '1'; wait until clk = '1' and clk'event; uart_tx_set_tx_data <= force '0'; wait until clk = '1' and clk'event; uart_tx_set_tx_data <= release; - injected_errors <= injected_errors + 1; + injected_errors <= injected_errors + 1; log("Injected error on the UART Stop-Bit.", VLOW); - end if; + end if; else last_flip := (others => '0'); end if; @@ -555,7 +556,7 @@ begin -- architecture behav dir_err <= '0'; elsif (dir_discr_cnt > DISCR_THRES) then dir_err <= '1'; - if(error_logged = false) then + if (error_logged = false) then log("ERROR: Detected Discrepancy in the Direction: Discrepancy Count bigger than " & to_string(DISCR_THRES) & ".", VLOW); error_logged := true; end if; @@ -579,7 +580,7 @@ begin -- architecture behav pd_err <= '0'; elsif (pd_discr_cnt > DISCR_THRES) then pd_err <= '1'; - if(error_logged = false) then + if (error_logged = false) then log("ERROR: Misaligned PD count: Discrepancy Count bigger than " & to_string(DISCR_THRES) & ".", VLOW); error_logged := true; end if; @@ -593,7 +594,7 @@ begin -- architecture behav pos_err <= '0'; elsif (pos_discr_cnt > DISCR_THRES) then pos_err <= '1'; - if(error_logged = false) then + if (error_logged = false) then log("ERROR: Misaligned in the Absolute-Position: Discrepancy Count bigger than " & to_string(DISCR_THRES) & ".", VLOW); error_logged := true; end if; @@ -609,11 +610,11 @@ begin -- architecture behav elsif (end_of_swathe = '1' and enc_pulse_cnt /= SWATHE_LEN) then enc_err <= '1'; end if; - if(reset_n = '0') then + if (reset_n = '0') then ps_err <= '0'; - elsif(running = true and ps_flip_cnt = integer(0.9*real(PS_SWITCH_PER)) and print_start_out /= print_start_in) then + elsif (running = true and ps_flip_cnt = integer(0.9 * real(PS_SWITCH_PER)) and print_start_out /= print_start_in) then ps_err <= '1'; - if(error_logged = false) then + if (error_logged = false) then log("ERROR: Print-Start error.", VLOW); error_logged := true; end if; @@ -653,10 +654,10 @@ begin -- architecture behav begin if (reset_n = '0') then detected_error <= false; - error_logged := false; + error_logged := false; elsif (clk = '1' and clk'event) then if (ovfl_err = '1' or dir_err = '1' or pd_err = '1' or pos_err = '1' or ps_err = '1') then - if(ovfl_err = '1') then + if (ovfl_err = '1') then log("ERROR: Detected Overflow Error.", VLOW); end if; detected_error <= true;