ELGIP-143 - Add details for notes/confluence to FPM7

This commit is contained in:
Damian Smith 2022-05-17 14:11:17 +01:00
commit b284909df1
3 changed files with 14 additions and 11 deletions

View file

@ -6,6 +6,7 @@
"addr_hi_bit": "14",
"addr_lo_bit": "11",
"description": "Fire-Pulse-Manager version 7",
"notes": "The Fire Pulse Manager produces fire-request strobe signals to trigger the print_units to load and fire the printhead (or sub-head). It does so based on either received UART messages over Plastic Optic Fibre (POF) if using the SEB-PDW, or from encoder/PD inputs if using the SEB-EPD. Full details on confluence at https://congis.atlassian.net/wiki/spaces/EL/pages/26742062920/Fire+Pulse+Manager#FPM---v7",
"sub_blocks": {
"fpm_ctrl_7": {
"instance": "",

View file

@ -4,6 +4,7 @@
"bus": "csr",
"addr_width": "5",
"description": "This block is the fire pulse manager control",
"notes": "This is the control registers for the Fire Pulse Manager. https://congis.atlassian.net/wiki/spaces/EL/pages/26742062920/Fire+Pulse+Manager#FPM---v7. The Fire Pulse Manager produces fire-request strobe signals to trigger the print_units to load and fire the printhead (or sub-head). It does so based on either received UART messages over Plastic Optic Fibre (POF) if using the SEB-PDW, or from encoder/PD inputs if using the SEB-EPD. Full details on confluence at https://congis.atlassian.net/wiki/spaces/EL/pages/26742062920/Fire+Pulse+Manager#FPM---v7",
"registers": {
"ip_id": {
"address": "0",
@ -144,13 +145,13 @@
"bit_len": "1",
"reset": "0x0",
"description": "0 => SEB_EPD_LINK_OUT is driven by the POF-Tx output, 0 => SEB_EPD_LINK_OUT is driven by the Drop-Watch output"
},
},
"print_start_override": {
"type": "w",
"bit_len": "2",
"reset": "0x0",
"description": "0- => no override. 10 => override to zero (stop print). 11 => override to one (start print). output of FPM and value for pof_tx"
}
"type": "w",
"bit_len": "2",
"reset": "0x0",
"description": "0- => no override. 10 => override to zero (stop print). 11 => override to one (start print). output of FPM and value for pof_tx"
}
}
},
"pof_receiver_control": {
@ -329,10 +330,10 @@
"description": "0 => Error rate below threshold, 1 => Error rate above threshold"
},
"print_start_received": {
"type": "r",
"bit_len": "1",
"reset": "0x0",
"description": "print_start as received over pof. (for protocol zero, will be fixed at '1')"
"type": "r",
"bit_len": "1",
"reset": "0x0",
"description": "print_start as received over pof. (for protocol zero, will be fixed at '1')"
}
}
},

View file

@ -3,7 +3,8 @@
"ip_name": "fpm_diags_7",
"bus": "csr",
"addr_width": "6",
"description": "SMB diagnostics, see https://congis.atlassian.net/wiki/spaces/EL/pages/26778599541/Notes+on+FPM+changes+to+support+auto+generated+registers",
"description": "Fire Pulse Manager diagnostics - used to monitor encoder / PD inputs",
"notes": "<p>Diagnostics for the Fire Pulse Manager for use when the SEB-EPD inputs are connected. Details on confluence via https://congis.atlassian.net/wiki/spaces/EL/pages/26778599541/Notes+on+FPM+changes+to+support+auto+generated+registers#fpm_diags_7 This is optionally instantiated in FPM_7 based on a generic. (presence will be reported in fpm_ctrl registers.</p> <p>When the ESW wants to read the encoder fifo, the ESW should: a. write '1' to register rd_enc_fifo to prepare the encoder fifo output; b. read the encoder fifo output from register enc_fifo_output.</p> <p>When the ESW wants to read the product detect fifo, the ESW should: a. write '1' to register rd_pd_fifo to prepare the product detect fifo output;b. read the product detect fifo output from register pd_fifo_output.</p>",
"registers": {
"init": {
"address": "0",