HMBSI1536-87 Introduced reset for command queue in data streamer component

This commit is contained in:
Christos Spirotis 2020-09-10 14:46:31 +01:00
commit bb72dda61b

View file

@ -114,7 +114,7 @@ architecture rtl of data_streamer_7 is
constant CONST_IP_ID_NUMBER : std_logic_vector(7 downto 0) := 8x"0d";
constant CONST_IP_ID_MFR_NUMBER: std_logic_vector(7 downto 0) := 8x"04";
constant CONST_IP_VER_MINOR : std_logic_vector(7 downto 0) := 8x"05";
constant CONST_IP_VER_MINOR : std_logic_vector(7 downto 0) := 8x"06";
constant CONST_IP_VER_MAJOR : std_logic_vector(7 downto 0) := 8x"07";
subtype CMD_BITS is natural range 3 downto 0;
@ -217,7 +217,10 @@ architecture rtl of data_streamer_7 is
signal is_slim : std_logic;
signal cmd_available_step : std_logic;
signal cmd_available_step : std_logic;
signal cmd_queue_rst_sreg : std_logic_vector( 2 downto 0);
signal cmd_queue_rst : std_logic;
begin
@ -232,6 +235,25 @@ begin
-- ---------------------------------------
-- COMMAND QUEUE
-- ---------------------------------------
-- This process initialises a reset shift register for the command queue whenever the FPGA is reset
-- to an all ones pattern. When the FPGA reset goes away the shift register starts filling up with '0's.
CMD_Q_RST : process (clk, rst_n)
begin
if rst_n = '0' then
cmd_queue_rst_sreg <= (others => '1');
elsif (clk'event and clk = '1') then
-- Shift in '0' on every rising edge of the clock when there is no FPGA reset active
cmd_queue_rst_sreg <= cmd_queue_rst_sreg(cmd_queue_rst_sreg'LENGTH-2 downto 0) & '0';
end if;
end process CMD_Q_RST;
-- The final reset driving the command queue is the logic OR of control_clear_cmd comming from
-- the register block and the MSB of the reset shift register. This results on the command queue
-- receiving a clear whenever the FPGA itself is reset.
cmd_queue_rst <= control_clear_cmd or cmd_queue_rst_sreg(cmd_queue_rst_sreg'LENGTH-1);
-- Instantiate the command queue
cmd_queue_inst : entity work.cmd_queue_7
generic map(
QUEUE_DEPTH => CMD_QUEUE_DEPTH
@ -239,7 +261,7 @@ begin
port map
(
clock => clk,
sclr => control_clear_cmd,
sclr => cmd_queue_rst,
wrreq => cmd_q_write,
data => cmd_q_write_data,