ELGIP-86 added pixel buffer peek port and logic, enabled if EN_PEEK generic set
This commit is contained in:
parent
5e57647e64
commit
c99dbe2b3d
1 changed files with 44 additions and 3 deletions
|
|
@ -70,7 +70,8 @@ entity pixel_buffer_0 IS
|
|||
MAX_OP_WIDTH : natural range 1 to 48 := 48;
|
||||
SHIFT_DEPTH : integer range 1 to 1024 := 128;
|
||||
PX_DEPTH : integer range 2 to 1024 := 64;
|
||||
FULL_MARGIN : integer range 2 to 1024 := 8
|
||||
FULL_MARGIN : integer range 2 to 1024 := 8;
|
||||
EN_PEEK : boolean := false
|
||||
);
|
||||
port
|
||||
(
|
||||
|
|
@ -106,10 +107,18 @@ entity pixel_buffer_0 IS
|
|||
sequencers_busy : out std_logic;
|
||||
fp_holdoff_update : in std_logic;
|
||||
wave_seq_len : in std_logic_vector(15 downto 0);
|
||||
|
||||
-- Diagnostic port to peek into pixel buffers, available when EN_PEEK is true.
|
||||
-- Must only be used when buffer idle (i.e. no fire_req pulses) else output data
|
||||
-- could be corrupted, although internal state and buffer values remain correct.
|
||||
diag_peek_sel : in std_logic := '0';
|
||||
diag_peek_addr : in std_logic_vector(31 downto 0) := (others => '0');
|
||||
diag_peek_data : out std_logic_vector(31 downto 0);
|
||||
diag_peek_rdptr : out std_logic_vector( 7 downto 0);
|
||||
|
||||
ip_id_ip_number : out std_logic_vector( 7 downto 0) := 8x"1c";
|
||||
ip_id_mfr_number : out std_logic_vector( 7 downto 0) := 8x"00";
|
||||
ip_ver_minor_number : out std_logic_vector( 7 downto 0) := 8x"01";
|
||||
ip_ver_minor_number : out std_logic_vector( 7 downto 0) := 8x"02";
|
||||
ip_ver_major_number : out std_logic_vector( 7 downto 0) := 8x"00";
|
||||
|
||||
diag_word_count : out std_logic_vector(6 downto 0)
|
||||
|
|
@ -124,9 +133,12 @@ architecture rtl of pixel_buffer_0 is
|
|||
constant FULL_THRESHOLD : integer := PX_DEPTH-FULL_MARGIN;
|
||||
|
||||
subtype OP_WIDTH_RANGE is natural range 1 to MAX_OP_WIDTH;
|
||||
|
||||
type diag_array_t is array (natural range <> ) of std_logic_vector;
|
||||
|
||||
signal wr_ptr : std_logic_vector(PX_DEPTH_LOG2 downto 0);
|
||||
signal rd_ptr : std_logic_vector(PX_DEPTH_LOG2 downto 0);
|
||||
signal rd_ptr_int : std_logic_vector(PX_DEPTH_LOG2 downto 0);
|
||||
signal rd_ptr_start : std_logic_vector(PX_DEPTH_LOG2 downto 0);
|
||||
signal wr_ptr_start : std_logic_vector(PX_DEPTH_LOG2 downto 0);
|
||||
signal wr_ptr_plus1 : std_logic_vector(PX_DEPTH_LOG2 downto 0);
|
||||
|
|
@ -153,6 +165,9 @@ architecture rtl of pixel_buffer_0 is
|
|||
signal data_int : std_logic_vector(32 downto 0);
|
||||
signal writing_first_stripe : std_logic;
|
||||
|
||||
signal diag_peek_data_int : diag_array_t(0 to MAX_OP_WIDTH-1)(PX_WIDTH-1 downto 0);
|
||||
signal is_en_peek : std_logic;
|
||||
|
||||
begin
|
||||
|
||||
-- pragma translate_off
|
||||
|
|
@ -172,7 +187,7 @@ begin
|
|||
(
|
||||
clock => clk,
|
||||
data => data_int,
|
||||
rdaddress => rd_ptr(PX_DEPTH_LOG2-1 downto 0),
|
||||
rdaddress => rd_ptr_int(PX_DEPTH_LOG2-1 downto 0),
|
||||
wraddress => wr_ptr(PX_DEPTH_LOG2-1 downto 0),
|
||||
wren => wren(i),
|
||||
q => q((i+1)*PX_WIDTH-1 downto i*PX_WIDTH)
|
||||
|
|
@ -207,6 +222,19 @@ begin
|
|||
fire_drop_detect <= '1' when fire_req = '1' and sequencers_busy = '1' else '0';
|
||||
|
||||
diag_word_count <= word_count(diag_word_count'left downto 0);
|
||||
|
||||
-- If pixel buffer peeking enabled, then mux the read pointer
|
||||
-- to the buffers with diag address
|
||||
GENPK : if EN_PEEK generate
|
||||
is_en_peek <= '1';
|
||||
rd_ptr_int <= rd_ptr when diag_peek_sel = '0' else "0" & diag_peek_addr(PX_DEPTH_LOG2-1 downto 0);
|
||||
end generate;
|
||||
|
||||
-- When no buffer peeking, use only the calculatrated read address
|
||||
GENNOPL : if not EN_PEEK generate
|
||||
is_en_peek <= '0';
|
||||
rd_ptr_int <= rd_ptr;
|
||||
end generate;
|
||||
|
||||
PX_BUF_CTRL : process(rst_n, clk) is
|
||||
variable op_width : OP_WIDTH_RANGE;
|
||||
|
|
@ -284,11 +312,24 @@ begin
|
|||
end if;
|
||||
end if;
|
||||
|
||||
-- If pixel buffer peeking diags enabled, export the read pointer
|
||||
if is_en_peek then
|
||||
diag_peek_rdptr <= rd_ptr(7 downto 0);
|
||||
else
|
||||
diag_peek_rdptr <= (others => '0');
|
||||
end if;
|
||||
|
||||
-- Increment the read pointer for each read request
|
||||
if rdreq = '1' and error = '0' then
|
||||
rd_ptr <= std_logic_vector(unsigned(rd_ptr) + 1);
|
||||
end if;
|
||||
|
||||
for i in 0 to MAX_OP_WIDTH-1 loop
|
||||
if is_en_peek = '1' and i = unsigned(diag_peek_addr(log2(MAX_OP_WIDTH)-1+PX_DEPTH_LOG2 downto PX_DEPTH_LOG2)) then
|
||||
diag_peek_data <= q((i+1)*PX_WIDTH-2 downto i*PX_WIDTH);
|
||||
end if;
|
||||
end loop;
|
||||
|
||||
-- Update buffer input state when ever we get a strobe
|
||||
if wr_req_int = '1' and error = '0' then
|
||||
|
||||
|
|
|
|||
Loading…
Add table
Add a link
Reference in a new issue