ELGIP-91 ELGIP-88 - Created major version 3. Removed legacy code for output pulse conditioning and overdrive detection. Reviewed diagnostic registers
This commit is contained in:
parent
9b8a903378
commit
e2c35c7c44
26 changed files with 7867 additions and 1 deletions
462
generic_ip/pulse_generator/3/doc/pulse_generator_3.json
Normal file
462
generic_ip/pulse_generator/3/doc/pulse_generator_3.json
Normal file
|
|
@ -0,0 +1,462 @@
|
|||
[{
|
||||
"ip_name": "pulse_generator_3",
|
||||
"bus": "csr",
|
||||
"description": "Generate Fire-Requests, based on the absolute position and PD inputs - W&H specific variant",
|
||||
"addr_hi_bit" : "10",
|
||||
"addr_lo_bit" : "5",
|
||||
"sub_blocks": {
|
||||
"local": {
|
||||
"instance": "",
|
||||
"process": "cpp, txt",
|
||||
"offset": "0x0"
|
||||
},
|
||||
"generic_sequencer_15": {
|
||||
"instance": "channel",
|
||||
"process": "cpp, txt",
|
||||
"offset": "0x20"
|
||||
}
|
||||
},
|
||||
"registers": {
|
||||
"ip_id" : {
|
||||
"address" : "0",
|
||||
"width" : "32",
|
||||
"description" : "Unique ID for this IP block",
|
||||
"fields": {
|
||||
"ip_number" : {
|
||||
"type" : "c",
|
||||
"bit_len" : "8",
|
||||
"reset" : "0x13",
|
||||
"description" : "IP identifier number"
|
||||
},
|
||||
"mfr_number" : {
|
||||
"type" : "c",
|
||||
"bit_len" : "8",
|
||||
"reset" : "0xFF",
|
||||
"description" : "Manufacturer number"
|
||||
|
||||
},
|
||||
"reserved" : {
|
||||
"type" : "rsv",
|
||||
"bit_len" : "16",
|
||||
"description" : "Reserved bits"
|
||||
}
|
||||
}
|
||||
},
|
||||
"ip_ver" : {
|
||||
"address" : "1",
|
||||
"width" : "32",
|
||||
"description" : "IP Version",
|
||||
"fields": {
|
||||
"minor_number" : {
|
||||
"type" : "c",
|
||||
"bit_len" : "8",
|
||||
"reset" : "0x01",
|
||||
"description" : "Minor number"
|
||||
},
|
||||
"major_number" : {
|
||||
"type" : "c",
|
||||
"bit_len" : "8",
|
||||
"reset" : "0x03",
|
||||
"description" : "Major number"
|
||||
|
||||
},
|
||||
"reserved" : {
|
||||
"type" : "rsv",
|
||||
"bit_len" : "16",
|
||||
"description" : "Reserved bits"
|
||||
}
|
||||
}
|
||||
},
|
||||
"pulse_gen_control": {
|
||||
"address": "2",
|
||||
"width": "32",
|
||||
"description": "",
|
||||
"fields": {
|
||||
"enable": {
|
||||
"type": "w",
|
||||
"bit_len": "1",
|
||||
"reset": "0x0",
|
||||
"description": "Pulse-Generator Enable"
|
||||
},
|
||||
"bypass_channel_controller": {
|
||||
"type": "w",
|
||||
"bit_len": "1",
|
||||
"reset": "0x0",
|
||||
"description": "By-Pass Ch-Ctrl (=> Fractional Divider only)"
|
||||
},
|
||||
"reserved_0": {
|
||||
"type": "rsv",
|
||||
"bit_len": "1",
|
||||
"description": ""
|
||||
},
|
||||
"bypass_delay_equalizer": {
|
||||
"type": "w",
|
||||
"bit_len": "1",
|
||||
"reset": "0x0",
|
||||
"description": "Bypass Delay Equalization"
|
||||
},
|
||||
"sw_control_dp_dir": {
|
||||
"type": "w",
|
||||
"bit_len": "1",
|
||||
"reset": "0x0",
|
||||
"description": "Dual-Phase Direction, when Ch-Ctrl is bypassed"
|
||||
},
|
||||
"pd_queue_error_flag": {
|
||||
"type": "r",
|
||||
"bit_len": "1",
|
||||
"reset": "0x0",
|
||||
"description": "PD Queue Overflow Error"
|
||||
},
|
||||
"delay_equalizer_error_flag": {
|
||||
"type": "r",
|
||||
"bit_len": "1",
|
||||
"reset": "0x0",
|
||||
"description": "Delay Equalizer Overflow Error"
|
||||
},
|
||||
"reserved_1": {
|
||||
"type": "rsv",
|
||||
"bit_len": "1",
|
||||
"description": ""
|
||||
},
|
||||
"ch_mask_status": {
|
||||
"type": "r",
|
||||
"bit_len": "1",
|
||||
"reset": "0x0",
|
||||
"description": "ch_mask status"
|
||||
},
|
||||
"fire_enable_status": {
|
||||
"type": "r",
|
||||
"bit_len": "1",
|
||||
"reset": "0x0",
|
||||
"description": "fire enable status"
|
||||
},
|
||||
"dual_phase_directionality_select_status": {
|
||||
"type": "r",
|
||||
"bit_len": "1",
|
||||
"reset": "0x0",
|
||||
"description": "Dual-Phase Direction status"
|
||||
},
|
||||
"wh_apply_corr_en": {
|
||||
"type": "w",
|
||||
"bit_len": "1",
|
||||
"reset": "0x0",
|
||||
"description": "Enable WH wheel correction "
|
||||
},
|
||||
"wh_apply_corr_en": {
|
||||
"type": "w",
|
||||
"bit_len": "1",
|
||||
"reset": "0x0",
|
||||
"description": "Enable Pixel-Pitch Correction "
|
||||
},
|
||||
"tof_comp_enable": {
|
||||
"type": "w",
|
||||
"bit_len": "1",
|
||||
"reset": "0x0",
|
||||
"description": "Enable Time-of-Flight Compensation"
|
||||
},
|
||||
"tof_sat_flag": {
|
||||
"type": "r",
|
||||
"bit_len": "1",
|
||||
"reset": "0x0",
|
||||
"description": "Asserted when the current encoder velocity value falls outside of the range covered by the ToF compensation LUT. Velocity saturation is therefore applied."
|
||||
},
|
||||
"reserved_2": {
|
||||
"type": "rsv",
|
||||
"bit_len": "2",
|
||||
"description": ""
|
||||
},
|
||||
"enable_output": {
|
||||
"type": "w",
|
||||
"bit_len": "1",
|
||||
"reset": "0x0",
|
||||
"description": "Enable fire-request output"
|
||||
},
|
||||
"trigger_abort_fire": {
|
||||
"type": "w",
|
||||
"bit_len": "1",
|
||||
"reset": "0x0",
|
||||
"description": "Abort pending request of fire-request issued by Ch-Ctrl"
|
||||
},
|
||||
"reset_diag_regs" : {
|
||||
"type": "w",
|
||||
"bit_len": "1",
|
||||
"reset": "0x0",
|
||||
"description": "Reset the local PD and Fire-Request counters"
|
||||
},
|
||||
"clr_pd_queue" : {
|
||||
"type": "w0",
|
||||
"bit_len": "1",
|
||||
"reset": "0x0",
|
||||
"description": "Clear PD Queue"
|
||||
},
|
||||
"reserved_3" : {
|
||||
"type": "rsv",
|
||||
"bit_len": "12",
|
||||
"description": ""
|
||||
}
|
||||
}
|
||||
},
|
||||
"pd_offset_dir_0": {
|
||||
"type": "w",
|
||||
"address": "3",
|
||||
"reset": "0x00",
|
||||
"width": "32",
|
||||
"description": "PD Offset for DIR-0"
|
||||
},
|
||||
"pd_offset_dir_1": {
|
||||
"type": "w",
|
||||
"address": "4",
|
||||
"reset": "0x00",
|
||||
"width": "32",
|
||||
"description": "PD Offset for DIR-1"
|
||||
},
|
||||
"channel_delay": {
|
||||
"type": "w",
|
||||
"address": "5",
|
||||
"reset": "0x00",
|
||||
"width": "16",
|
||||
"description": "Channel Delay (Delay Equalization)"
|
||||
},
|
||||
"channel_controller_control": {
|
||||
"address": "6",
|
||||
"width": "16",
|
||||
"description": "",
|
||||
"fields": {
|
||||
"start_seq_trigger": {
|
||||
"type": "w0",
|
||||
"bit_len": "1",
|
||||
"reset": "0x0",
|
||||
"description": "Ch-Ctrl Sequencer Start-Request"
|
||||
},
|
||||
"busy": {
|
||||
"type": "r",
|
||||
"bit_len": "1",
|
||||
"reset": "0x0",
|
||||
"description": "Ch-Ctrl Sequencer Busy"
|
||||
},
|
||||
"reserved0": {
|
||||
"type": "rsv",
|
||||
"bit_len": "6",
|
||||
"description": ""
|
||||
},
|
||||
"sequencer_start_address": {
|
||||
"type": "w",
|
||||
"bit_len": "8",
|
||||
"reset" : "0x0",
|
||||
"description": "Ch-Ctrl Sequencer Start-Address"
|
||||
}
|
||||
}
|
||||
},
|
||||
"fractional_divider_control": {
|
||||
"address": "7",
|
||||
"width": "3",
|
||||
"description": "Fractional Divider Control Register",
|
||||
"fields": {
|
||||
"enable": {
|
||||
"type": "w",
|
||||
"bit_len": "1",
|
||||
"reset": "0x0",
|
||||
"description": "Fractional Divider Enable"
|
||||
},
|
||||
"udp_max_pos": {
|
||||
"type": "w",
|
||||
"bit_len": "1",
|
||||
"reset": "0x0",
|
||||
"description": "Clear the encoder jitter for DIR-0"
|
||||
},
|
||||
"udp_min_pos": {
|
||||
"type": "w",
|
||||
"bit_len": "1",
|
||||
"reset": "0x0",
|
||||
"description": "Clear the encoder jitter for DIR-1"
|
||||
}
|
||||
}
|
||||
},
|
||||
"divider_ratio_int": {
|
||||
"type": "w",
|
||||
"address": "11",
|
||||
"reset": "0x00",
|
||||
"width": "10",
|
||||
"description": "Integer part of the Division ratio"
|
||||
},
|
||||
"divider_ratio_fraction": {
|
||||
"type": "w",
|
||||
"address": "12",
|
||||
"reset": "0x00",
|
||||
"width": "24",
|
||||
"description": "Fractional part of the Division ratio"
|
||||
},
|
||||
"subpixel_phase_num": {
|
||||
"type": "w",
|
||||
"address": "13",
|
||||
"reset": "0x01",
|
||||
"width": "6",
|
||||
"description": "Number of sub-pixel phases to be generated"
|
||||
},
|
||||
"abs_position_max": {
|
||||
"type": "r",
|
||||
"address": "15",
|
||||
"reset": "0x00",
|
||||
"width": "32",
|
||||
"subtype": "signed",
|
||||
"description": "Absolute Position Maximum"
|
||||
},
|
||||
"abs_position_min": {
|
||||
"type": "r",
|
||||
"address": "16",
|
||||
"reset": "0x00",
|
||||
"width": "32",
|
||||
"subtype": "signed",
|
||||
"description": "Absolute Position Minimum"
|
||||
},
|
||||
"abs_position": {
|
||||
"type": "r",
|
||||
"address": "17",
|
||||
"reset": "0x00",
|
||||
"width": "32",
|
||||
"subtype": "signed",
|
||||
"description": "Current Absolute Position "
|
||||
},
|
||||
"pd_counter": {
|
||||
"type": "r",
|
||||
"address": "18",
|
||||
"reset": "0x00",
|
||||
"width": "16",
|
||||
"description": "PD counter"
|
||||
},
|
||||
"fire_req_counter": {
|
||||
"type": "r",
|
||||
"address": "19",
|
||||
"reset": "0x00",
|
||||
"width": "24",
|
||||
"description": "Fire-Request counter"
|
||||
},
|
||||
"enc_speed_meas_window": {
|
||||
"address": "20",
|
||||
"width": "20",
|
||||
"type": "w",
|
||||
"reset": "0x0C350",
|
||||
"description": "Encoder speed measurement window length [clock cycles @100MHz]"
|
||||
},
|
||||
"enc_speed": {
|
||||
"address": "21",
|
||||
"width": "20",
|
||||
"type": "r",
|
||||
"reset": "0x0",
|
||||
"subtype": "signed",
|
||||
"description": "Encoder Velocity: balance between positive and negative encoder steps over the measurement window"
|
||||
},
|
||||
"tof_compensation": {
|
||||
"address": "22",
|
||||
"width": "32",
|
||||
"description": "Time-of-Flight Compensation",
|
||||
"fields": {
|
||||
"enc_speed_norm": {
|
||||
"type": "w",
|
||||
"bit_len": "16",
|
||||
"reset": "0x0100",
|
||||
"description": "Encoder Speed Normalization factor: allow to match the encoder-speed range to the address bus width of the ToF Compensation LUT. With the default value (256), an encoder-speed measurement equal to k selects LUT address k)"
|
||||
},
|
||||
"tof_lut_comp": {
|
||||
"type": "r",
|
||||
"bit_len": "16",
|
||||
"reset": "0x0",
|
||||
"description": "Current value of the Time-of-Flight compensation"
|
||||
}
|
||||
}
|
||||
},
|
||||
"pixel_pitch_corr_stripe_num": {
|
||||
"type": "w",
|
||||
"address": "23",
|
||||
"reset": "0x00",
|
||||
"width": "24",
|
||||
"description": "Number of stripes to be considered for pixel pitch correction: corresponds to the number of pixels composing the label, head width included)"
|
||||
},
|
||||
"pixel_pitch_pos_err_2_corr": {
|
||||
"type": "w",
|
||||
"address": "24",
|
||||
"reset": "0x00",
|
||||
"width": "32",
|
||||
"description": "Static value used by the logic to compute pixel-pitch correction: need to be set to the number of 2^32/stripe_num, where stripe_num is the value programmed in pixel_pitch_corr_stripe_num"
|
||||
},
|
||||
"pixel_pitch_skip_corr_thres": {
|
||||
"type": "w",
|
||||
"address": "25",
|
||||
"reset": "0x400000",
|
||||
"width": "24",
|
||||
"description": "Alignment error threshold causing a correction to be skipped, expressed in encoder steps (24-bits integer) "
|
||||
},
|
||||
"pixel_pitch_loop_filter_corr": {
|
||||
"address": "26",
|
||||
"width": "32",
|
||||
"description": "Loop filter coefficient for pixel-pitch correction",
|
||||
"fields": {
|
||||
"delta_error_coeff": {
|
||||
"type": "w",
|
||||
"bit_len": "16",
|
||||
"reset": "0x0100",
|
||||
"description": "Loop Filter delta-error coefficient"
|
||||
},
|
||||
"tot_error_coeff": {
|
||||
"type": "w",
|
||||
"bit_len": "16",
|
||||
"reset": "0x0100",
|
||||
"description": "Loop Filter tot-error coefficient"
|
||||
}
|
||||
}
|
||||
},
|
||||
"pixel_pitch_pos_err_curr": {
|
||||
"type": "r",
|
||||
"address": "27",
|
||||
"reset": "0x00",
|
||||
"width": "32",
|
||||
"subtype": "signed",
|
||||
"description": "Pixel-pitch misalignment measured on the last rotation [encoder steps], represented as signed, fixed point with 24-bits integer part and 8-bits mantissa"
|
||||
},
|
||||
"pixel_pitch_pos_err_max": {
|
||||
"type": "r",
|
||||
"address": "28",
|
||||
"reset": "0x00",
|
||||
"width": "32",
|
||||
"subtype": "signed",
|
||||
"description": "Maximum recorded value of pixel-pitch misalignment [encoder steps], represented as signed, fixed point with 24-bits integer part and 8-bits mantissa"
|
||||
},
|
||||
"pixel_pitch_pos_err_min": {
|
||||
"type": "r",
|
||||
"address": "29",
|
||||
"reset": "0x00",
|
||||
"width": "32",
|
||||
"subtype": "signed",
|
||||
"description": "Minimum recorded value of pixel-pitch misalignment [encoder steps], represented as signed, fixed point with 24-bits integer part and 8-bits mantissa"
|
||||
},
|
||||
"pixel_pitch_div_ratio_corr": {
|
||||
"type": "r",
|
||||
"address": "30",
|
||||
"reset": "0x00",
|
||||
"width": "32",
|
||||
"subtype": "signed",
|
||||
"description": "Division-Ratio Correction (32-LSBs)"
|
||||
},
|
||||
"pixel_pitch_corr_cnt": {
|
||||
"type": "r",
|
||||
"address": "31",
|
||||
"reset": "0x00",
|
||||
"width": "16",
|
||||
"description": "Pixel-pitch corrections count"
|
||||
},
|
||||
"channel_controller_seq": {
|
||||
"type": "w",
|
||||
"address": "512",
|
||||
"reset": "0x00",
|
||||
"width": "32",
|
||||
"description": "Ch-Ctrl buffer offset (size=256)"
|
||||
},
|
||||
"ToF_Comp_LUT": {
|
||||
"type": "w",
|
||||
"address": "1024",
|
||||
"reset": "0x00",
|
||||
"width": "16",
|
||||
"description": "The LUT size is 512x16"
|
||||
}
|
||||
}
|
||||
}]
|
||||
79
generic_ip/pulse_generator/3/sim/sim_ch_ctrl_cfg.do
Normal file
79
generic_ip/pulse_generator/3/sim/sim_ch_ctrl_cfg.do
Normal file
|
|
@ -0,0 +1,79 @@
|
|||
# Simulation macro
|
||||
|
||||
.main clear
|
||||
|
||||
# Cleanup libraries
|
||||
foreach lib [list work OSVVM] {
|
||||
file delete -force -- $lib
|
||||
vlib $lib
|
||||
}
|
||||
|
||||
set COMP_ONLY 0
|
||||
|
||||
set TB_PATH ./../src/test
|
||||
set SRC_PATH ../src
|
||||
set COMMON_PATH ../../../common/0/src
|
||||
set SEQUENCER_PATH ../../../generic_sequencer/16
|
||||
set OSVVM_PATH ../../../common/0/src/test/OSVVM
|
||||
|
||||
set WORKLIB work
|
||||
|
||||
vlib ./work
|
||||
vmap work ./work
|
||||
|
||||
if {$COMP_ONLY == 0} {
|
||||
# Compile the constrained random related packages
|
||||
vlib OSVVM
|
||||
vcom -2008 -work OSVVM \
|
||||
$OSVVM_PATH/RandomBasePkg.vhd \
|
||||
$OSVVM_PATH/SortListPkg_int.vhd \
|
||||
$OSVVM_PATH/RandomPkg.vhd \
|
||||
$OSVVM_PATH/NamePkg.vhd \
|
||||
$OSVVM_PATH/MessagePkg.vhd \
|
||||
$OSVVM_PATH/CoveragePkg.vhd
|
||||
}
|
||||
|
||||
# compile the UUTs:
|
||||
vcom -2008 -work work $COMMON_PATH/common_pkg.vhd
|
||||
vcom -2008 -work $WORKLIB $COMMON_PATH/altera/sync_fifo.vhd
|
||||
vcom -2008 -work $WORKLIB $COMMON_PATH/queue_and_delay.vhd
|
||||
vcom -2008 -work $WORKLIB $COMMON_PATH/dpram_sclk.vhd
|
||||
vcom -2008 -work $WORKLIB $SEQUENCER_PATH/src/altera/generic_seq_ram_16.vhd
|
||||
vcom -2008 -work $WORKLIB $SEQUENCER_PATH/src/generic_sequencer_16_pkg.vhd
|
||||
vcom -2008 -work $WORKLIB $SEQUENCER_PATH/src/generic_sequencer_16.vhd
|
||||
vcom -2008 -work $WORKLIB $SRC_PATH/simple_frac_div_3.vhd
|
||||
vcom -2008 -work $WORKLIB $SRC_PATH/pulse_generator_3_pkg.vhd
|
||||
vcom -2008 -work $WORKLIB $SRC_PATH/pulse_generator_3.vhd
|
||||
|
||||
|
||||
# Compile the testbench and the other components supporting the test
|
||||
if {$COMP_ONLY == 0} {
|
||||
# Test support packages
|
||||
vcom -2008 -work $WORKLIB $COMMON_PATH/test/common_test_pkg.vhd
|
||||
vcom -2008 -work $WORKLIB $COMMON_PATH/test/log_pkg.vhd
|
||||
vcom -2008 -work $WORKLIB $COMMON_PATH/test/avalon_verify_pkg.vhd
|
||||
|
||||
# Testbench
|
||||
vcom -2008 -work $WORKLIB $TB_PATH/ch_ctrl_cfg_tb.vhd
|
||||
|
||||
vsim -t ps work.ch_ctrl_cfg_tb
|
||||
|
||||
|
||||
#add wave /ch_ctrl_cfg_tb/*
|
||||
#add wave ch_ctrl_cfg_tb/iUUT/*
|
||||
|
||||
# remove warnings from standard numeric/arithmetic packages (speed-up simulation)
|
||||
set StdArithNoWarnings 1
|
||||
set NumericStdNoWarnings 1
|
||||
|
||||
do wave_ch_ctrl_cfg.do
|
||||
|
||||
when -label end_of_simulation {test_completed == true} {echo "Simulation Completed"; stop ;}
|
||||
run -all
|
||||
|
||||
#run 1 ms;
|
||||
}
|
||||
|
||||
|
||||
|
||||
|
||||
79
generic_ip/pulse_generator/3/sim/sim_pd_jitter.do
Normal file
79
generic_ip/pulse_generator/3/sim/sim_pd_jitter.do
Normal file
|
|
@ -0,0 +1,79 @@
|
|||
# Simulation macro Net-Sync testbench
|
||||
|
||||
.main clear
|
||||
|
||||
# Cleanup libraries
|
||||
foreach lib [list work OSVVM] {
|
||||
file delete -force -- $lib
|
||||
vlib $lib
|
||||
}
|
||||
|
||||
set COMP_ONLY 0
|
||||
|
||||
set TB_PATH ./../src/test
|
||||
set SRC_PATH ../src
|
||||
set COMMON_PATH ../../../common/0/src
|
||||
set SEQUENCER_PATH ../../../generic_sequencer/16
|
||||
set OSVVM_PATH ../../../common/0/src/test/OSVVM
|
||||
|
||||
set WORKLIB work
|
||||
|
||||
vlib ./work
|
||||
vmap work ./work
|
||||
|
||||
if {$COMP_ONLY == 0} {
|
||||
# Compile the constrained random related packages
|
||||
vlib OSVVM
|
||||
vcom -2008 -work OSVVM \
|
||||
$OSVVM_PATH/RandomBasePkg.vhd \
|
||||
$OSVVM_PATH/SortListPkg_int.vhd \
|
||||
$OSVVM_PATH/RandomPkg.vhd \
|
||||
$OSVVM_PATH/NamePkg.vhd \
|
||||
$OSVVM_PATH/MessagePkg.vhd \
|
||||
$OSVVM_PATH/CoveragePkg.vhd
|
||||
}
|
||||
|
||||
# compile the UUTs:
|
||||
vcom -2008 -work work $COMMON_PATH/common_pkg.vhd
|
||||
vcom -2008 -work $WORKLIB $COMMON_PATH/altera/sync_fifo.vhd
|
||||
vcom -2008 -work $WORKLIB $COMMON_PATH/queue_and_delay.vhd
|
||||
vcom -2008 -work $WORKLIB $COMMON_PATH/dpram_sclk.vhd
|
||||
vcom -2008 -work $WORKLIB $SEQUENCER_PATH/src/altera/generic_seq_ram_16.vhd
|
||||
vcom -2008 -work $WORKLIB $SEQUENCER_PATH/src/generic_sequencer_16_pkg.vhd
|
||||
vcom -2008 -work $WORKLIB $SEQUENCER_PATH/src/generic_sequencer_16.vhd
|
||||
vcom -2008 -work $WORKLIB $SRC_PATH/simple_frac_div_3.vhd
|
||||
vcom -2008 -work $WORKLIB $SRC_PATH/pulse_generator_3_pkg.vhd
|
||||
vcom -2008 -work $WORKLIB $SRC_PATH/pulse_generator_3.vhd
|
||||
|
||||
|
||||
# Compile the testbench and the other components supporting the test
|
||||
if {$COMP_ONLY == 0} {
|
||||
# Test support packages
|
||||
vcom -2008 -work $WORKLIB $COMMON_PATH/test/common_test_pkg.vhd
|
||||
vcom -2008 -work $WORKLIB $COMMON_PATH/test/log_pkg.vhd
|
||||
vcom -2008 -work $WORKLIB $COMMON_PATH/test/avalon_verify_pkg.vhd
|
||||
|
||||
# Testbench
|
||||
vcom -2008 -work $WORKLIB $TB_PATH/pd_jitter_verify_tb.vhd
|
||||
|
||||
vsim -t ps work.pd_jitter_verify_tb
|
||||
|
||||
|
||||
#add wave /pd_jitter_verify_tb/*
|
||||
#add wave /pd_jitter_verify_tb/iUUT/*
|
||||
|
||||
# remove warnings from standard numeric/arithmetic packages (speed-up simulation)
|
||||
set StdArithNoWarnings 1
|
||||
set NumericStdNoWarnings 1
|
||||
|
||||
do wave_pd_jitter.do
|
||||
|
||||
when -label end_of_simulation {test_completed == true} {echo "Simulation Completed"; stop ;}
|
||||
run -all
|
||||
|
||||
#run 1 ms;
|
||||
}
|
||||
|
||||
|
||||
|
||||
|
||||
67
generic_ip/pulse_generator/3/sim/sim_simple_frac_div.do
Normal file
67
generic_ip/pulse_generator/3/sim/sim_simple_frac_div.do
Normal file
|
|
@ -0,0 +1,67 @@
|
|||
# Simulation macro
|
||||
|
||||
.main clear
|
||||
|
||||
# Cleanup libraries
|
||||
foreach lib [list work OSVVM] {
|
||||
file delete -force -- $lib
|
||||
vlib $lib
|
||||
}
|
||||
|
||||
set COMP_ONLY 0
|
||||
|
||||
set TB_PATH ./../src/test
|
||||
set OSVVM_PATH ../../../common/0/src/test/OSVVM
|
||||
set COMMON_PATH ../../../common/0/src
|
||||
|
||||
set WORKLIB work
|
||||
|
||||
vlib ./work
|
||||
vmap work ./work
|
||||
|
||||
if {$COMP_ONLY == 0} {
|
||||
# Compile the constrained random related packages
|
||||
vlib OSVVM
|
||||
vcom -2008 -work OSVVM \
|
||||
$OSVVM_PATH/RandomBasePkg.vhd \
|
||||
$OSVVM_PATH/SortListPkg_int.vhd \
|
||||
$OSVVM_PATH/RandomPkg.vhd \
|
||||
$OSVVM_PATH/NamePkg.vhd \
|
||||
$OSVVM_PATH/MessagePkg.vhd \
|
||||
$OSVVM_PATH/CoveragePkg.vhd
|
||||
}
|
||||
|
||||
# compile the UUTs:
|
||||
vcom -2008 -work $WORKLIB ../src/simple_frac_div_3.vhd
|
||||
|
||||
|
||||
# Compile the testbench and the other components supporting the test
|
||||
if {$COMP_ONLY == 0} {
|
||||
# Test support packages
|
||||
vcom -2008 -work $WORKLIB $COMMON_PATH/test/common_test_pkg.vhd
|
||||
vcom -2008 -work $WORKLIB $COMMON_PATH/test/log_pkg.vhd
|
||||
|
||||
# Testbench
|
||||
vcom -2008 -work $WORKLIB $TB_PATH/simple_frac_div_tb.vhd
|
||||
|
||||
vsim -t ps work.simple_frac_div_tb
|
||||
|
||||
|
||||
#add wave /simple_frac_div_tb/*
|
||||
#add wave /simple_frac_div_tb/iUUT/*
|
||||
|
||||
# remove warnings from standard numeric/arithmetic packages (speed-up simulation)
|
||||
set StdArithNoWarnings 1
|
||||
set NumericStdNoWarnings 1
|
||||
|
||||
do wave_simple_frac_div.do
|
||||
|
||||
when -label end_of_simulation {test_completed == true} {echo "Simulation Completed"; stop ;}
|
||||
run -all
|
||||
|
||||
#run 1 ms;
|
||||
}
|
||||
|
||||
|
||||
|
||||
|
||||
83
generic_ip/pulse_generator/3/sim/sim_tof_comp.do
Normal file
83
generic_ip/pulse_generator/3/sim/sim_tof_comp.do
Normal file
|
|
@ -0,0 +1,83 @@
|
|||
# Simulation macro
|
||||
|
||||
.main clear
|
||||
|
||||
# Cleanup libraries
|
||||
foreach lib [list work OSVVM] {
|
||||
file delete -force -- $lib
|
||||
vlib $lib
|
||||
}
|
||||
|
||||
set COMP_ONLY 0
|
||||
|
||||
set TB_PATH ./../src/test
|
||||
set SRC_PATH ../src
|
||||
set COMMON_PATH ../../../common/0/src
|
||||
set SEQUENCER_PATH ../../../generic_sequencer/16
|
||||
set FPM_PATH ../../../fire_pulse_manager/2/src
|
||||
set OSVVM_PATH ../../../common/0/src/test/OSVVM
|
||||
|
||||
set WORKLIB work
|
||||
|
||||
vlib ./work
|
||||
vmap work ./work
|
||||
|
||||
if {$COMP_ONLY == 0} {
|
||||
# Compile the constrained random related packages
|
||||
vlib OSVVM
|
||||
vcom -2008 -work OSVVM \
|
||||
$OSVVM_PATH/RandomBasePkg.vhd \
|
||||
$OSVVM_PATH/SortListPkg_int.vhd \
|
||||
$OSVVM_PATH/RandomPkg.vhd \
|
||||
$OSVVM_PATH/NamePkg.vhd \
|
||||
$OSVVM_PATH/MessagePkg.vhd \
|
||||
$OSVVM_PATH/CoveragePkg.vhd
|
||||
}
|
||||
|
||||
# compile the UUTs:
|
||||
vcom -2008 -work work $COMMON_PATH/common_pkg.vhd
|
||||
vcom -2008 -work $WORKLIB $COMMON_PATH/altera/sync_fifo.vhd
|
||||
vcom -2008 -work $WORKLIB $COMMON_PATH/queue_and_delay.vhd
|
||||
#vcom -2008 -work $WORKLIB $COMMON_PATH/dpram_sclk.vhd
|
||||
vlog -work $WORKLIB $COMMON_PATH/dpram_sclk.v
|
||||
vcom -2008 -work $WORKLIB $FPM_PATH/simple_enc_vel_detect.vhd
|
||||
vcom -2008 -work $WORKLIB $SEQUENCER_PATH/src/altera/generic_seq_ram_16.vhd
|
||||
vcom -2008 -work $WORKLIB $SEQUENCER_PATH/src/generic_sequencer_16_pkg.vhd
|
||||
vcom -2008 -work $WORKLIB $SEQUENCER_PATH/src/generic_sequencer_16.vhd
|
||||
vcom -2008 -work $WORKLIB $SRC_PATH/simple_frac_div_3.vhd
|
||||
vcom -2008 -work $WORKLIB $SRC_PATH/pulse_generator_3_pkg.vhd
|
||||
vcom -2008 -work $WORKLIB $SRC_PATH/pulse_generator_3.vhd
|
||||
|
||||
|
||||
# Compile the testbench and the other components supporting the test
|
||||
if {$COMP_ONLY == 0} {
|
||||
# Test support packages
|
||||
vcom -2008 -work $WORKLIB $COMMON_PATH/test/common_test_pkg.vhd
|
||||
vcom -2008 -work $WORKLIB $COMMON_PATH/test/log_pkg.vhd
|
||||
vcom -2008 -work $WORKLIB $COMMON_PATH/test/avalon_verify_pkg.vhd
|
||||
|
||||
# Testbench
|
||||
vcom -2008 -work $WORKLIB $TB_PATH/tof_comp_tb.vhd
|
||||
|
||||
vsim -t ps work.tof_comp_tb
|
||||
|
||||
|
||||
#add wave tof_comp_tb/*
|
||||
#add wave tof_comp_tb/iUUT/*
|
||||
#add wave tof_comp_tb/iVEL/*
|
||||
|
||||
# remove warnings from standard numeric/arithmetic packages (speed-up simulation)
|
||||
set StdArithNoWarnings 1
|
||||
set NumericStdNoWarnings 1
|
||||
|
||||
do wave_tof_comp.do
|
||||
|
||||
when -label end_of_simulation {test_completed == true} {echo "Simulation Completed"; stop ;}
|
||||
run -all
|
||||
|
||||
#run 1 ms;
|
||||
}
|
||||
|
||||
|
||||
|
||||
|
||||
247
generic_ip/pulse_generator/3/sim/wave_ch_ctrl_cfg.do
Normal file
247
generic_ip/pulse_generator/3/sim/wave_ch_ctrl_cfg.do
Normal file
|
|
@ -0,0 +1,247 @@
|
|||
onerror {resume}
|
||||
quietly WaveActivateNextPane {} 0
|
||||
add wave -noupdate /ch_ctrl_cfg_tb/reset_n
|
||||
add wave -noupdate /ch_ctrl_cfg_tb/clk
|
||||
add wave -noupdate /ch_ctrl_cfg_tb/wheel_error
|
||||
add wave -noupdate /ch_ctrl_cfg_tb/rotation_idx
|
||||
add wave -noupdate -radix decimal /ch_ctrl_cfg_tb/iUUT/wh_rotat_cnt
|
||||
add wave -noupdate /ch_ctrl_cfg_tb/wh_pos_err_r
|
||||
add wave -noupdate /ch_ctrl_cfg_tb/div_ratio_corr_rr
|
||||
add wave -noupdate /ch_ctrl_cfg_tb/wheel_corr_on
|
||||
add wave -noupdate /ch_ctrl_cfg_tb/pos_error
|
||||
add wave -noupdate /ch_ctrl_cfg_tb/pos_error_old
|
||||
add wave -noupdate /ch_ctrl_cfg_tb/div_ratio_corr_r
|
||||
add wave -noupdate /ch_ctrl_cfg_tb/div_ratio_r
|
||||
add wave -noupdate -radix hexadecimal /ch_ctrl_cfg_tb/iUUT/div_ratio
|
||||
add wave -noupdate -radix hexadecimal /ch_ctrl_cfg_tb/iUUT/div_ratio_i
|
||||
add wave -noupdate -radix hexadecimal /ch_ctrl_cfg_tb/iUUT/div_ratio_corr
|
||||
add wave -noupdate -radix decimal /ch_ctrl_cfg_tb/iUUT/wh_loop_filt_tot
|
||||
add wave -noupdate -radix decimal /ch_ctrl_cfg_tb/iUUT/wh_loop_filt_delta
|
||||
add wave -noupdate -radix decimal /ch_ctrl_cfg_tb/iUUT/wh_pos_err_old
|
||||
add wave -noupdate -radix decimal /ch_ctrl_cfg_tb/iUUT/wh_tot_err
|
||||
add wave -noupdate -radix decimal /ch_ctrl_cfg_tb/iUUT/wh_delta_err
|
||||
add wave -noupdate -radix decimal /ch_ctrl_cfg_tb/iUUT/wh_loop_err
|
||||
add wave -noupdate /ch_ctrl_cfg_tb/wh_pos_err_r
|
||||
add wave -noupdate -radix decimal /ch_ctrl_cfg_tb/iUUT/wh_pos_err_curr
|
||||
add wave -noupdate /ch_ctrl_cfg_tb/init
|
||||
add wave -noupdate /ch_ctrl_cfg_tb/pd_in
|
||||
add wave -noupdate /ch_ctrl_cfg_tb/skip_pd
|
||||
add wave -noupdate /ch_ctrl_cfg_tb/wheel_pos
|
||||
add wave -noupdate -radix decimal /ch_ctrl_cfg_tb/abs_position
|
||||
add wave -noupdate /ch_ctrl_cfg_tb/dp_dir
|
||||
add wave -noupdate /ch_ctrl_cfg_tb/fire_req
|
||||
add wave -noupdate /ch_ctrl_cfg_tb/filtered_pd
|
||||
add wave -noupdate /ch_ctrl_cfg_tb/ch_pd
|
||||
add wave -noupdate /ch_ctrl_cfg_tb/ch_mask
|
||||
add wave -noupdate /ch_ctrl_cfg_tb/raw_fire_req
|
||||
add wave -noupdate -radix hexadecimal /ch_ctrl_cfg_tb/avs_address
|
||||
add wave -noupdate /ch_ctrl_cfg_tb/avs_write
|
||||
add wave -noupdate -radix hexadecimal /ch_ctrl_cfg_tb/avs_writedata
|
||||
add wave -noupdate /ch_ctrl_cfg_tb/avs_read
|
||||
add wave -noupdate /ch_ctrl_cfg_tb/avs_readdatavalid
|
||||
add wave -noupdate -radix hexadecimal /ch_ctrl_cfg_tb/avs_readdata
|
||||
add wave -noupdate -radix hexadecimal /ch_ctrl_cfg_tb/avs_m
|
||||
add wave -noupdate -radix hexadecimal /ch_ctrl_cfg_tb/avs_s
|
||||
add wave -noupdate /ch_ctrl_cfg_tb/pd_in_cnt
|
||||
add wave -noupdate /ch_ctrl_cfg_tb/pd_out_cnt
|
||||
add wave -noupdate /ch_ctrl_cfg_tb/test_completed
|
||||
add wave -noupdate /ch_ctrl_cfg_tb/setup
|
||||
add wave -noupdate /ch_ctrl_cfg_tb/running
|
||||
add wave -noupdate /ch_ctrl_cfg_tb/passed
|
||||
add wave -noupdate /ch_ctrl_cfg_tb/failed
|
||||
add wave -noupdate /ch_ctrl_cfg_tb/iUUT/wh_apply_corr_en
|
||||
add wave -noupdate /ch_ctrl_cfg_tb/iUUT/wh_error_meas_avail
|
||||
add wave -noupdate /ch_ctrl_cfg_tb/pos_error
|
||||
add wave -noupdate -radix hexadecimal /ch_ctrl_cfg_tb/iUUT/wh_pos_err_abs
|
||||
add wave -noupdate -radix hexadecimal /ch_ctrl_cfg_tb/iUUT/wh_skip_corr_thres
|
||||
add wave -noupdate /ch_ctrl_cfg_tb/iUUT/wh_skip_corr
|
||||
add wave -noupdate /ch_ctrl_cfg_tb/iUUT/wh_corr_ready
|
||||
add wave -noupdate /ch_ctrl_cfg_tb/iUUT/wh_error_meas_started
|
||||
add wave -noupdate /ch_ctrl_cfg_tb/iUUT/init_wh
|
||||
add wave -noupdate /ch_ctrl_cfg_tb/iUUT/loc_pd_d
|
||||
add wave -noupdate /ch_ctrl_cfg_tb/iUUT/wh_meas_event
|
||||
add wave -noupdate /ch_ctrl_cfg_tb/iUUT/wh_img_end
|
||||
add wave -noupdate -radix unsigned /ch_ctrl_cfg_tb/iUUT/wh_img_pixel_cnt
|
||||
add wave -noupdate -radix unsigned /ch_ctrl_cfg_tb/iUUT/wh_image_pixel_len
|
||||
add wave -noupdate /ch_ctrl_cfg_tb/iUUT/first_img_started
|
||||
add wave -noupdate /ch_ctrl_cfg_tb/iUUT/wh_error_meas_avail
|
||||
add wave -noupdate /ch_ctrl_cfg_tb/iUUT/wh_corr_ready_v
|
||||
add wave -noupdate -radix decimal /ch_ctrl_cfg_tb/iUUT/start_pos
|
||||
add wave -noupdate /ch_ctrl_cfg_tb/iUUT/abs_pos_d
|
||||
add wave -noupdate -radix decimal /ch_ctrl_cfg_tb/iUUT/basic_pos_error
|
||||
add wave -noupdate -radix unsigned /ch_ctrl_cfg_tb/iUUT/wh_pos_err_abs
|
||||
add wave -noupdate /ch_ctrl_cfg_tb/iUUT/wh_skip_corr_thres
|
||||
add wave -noupdate -radix hexadecimal /ch_ctrl_cfg_tb/iUUT/wh_pos_err
|
||||
add wave -noupdate /ch_ctrl_cfg_tb/iUUT/wh_pos_err_max
|
||||
add wave -noupdate /ch_ctrl_cfg_tb/iUUT/wh_pos_err_min
|
||||
add wave -noupdate /ch_ctrl_cfg_tb/iUUT/wh_pos_err_2_corr
|
||||
add wave -noupdate /ch_ctrl_cfg_tb/iUUT/div_ratio_corr_new
|
||||
add wave -noupdate -radix decimal /ch_ctrl_cfg_tb/iUUT/pos_error
|
||||
add wave -noupdate -radix hexadecimal /ch_ctrl_cfg_tb/iUUT/div_ratio_corr_ext
|
||||
add wave -noupdate -radix hexadecimal /ch_ctrl_cfg_tb/iUUT/div_ratio
|
||||
add wave -noupdate -radix hexadecimal /ch_ctrl_cfg_tb/iUUT/div_ratio_i
|
||||
add wave -noupdate -radix hexadecimal /ch_ctrl_cfg_tb/iUUT/div_ratio_corr
|
||||
add wave -noupdate /ch_ctrl_cfg_tb/iUUT/clk
|
||||
add wave -noupdate /ch_ctrl_cfg_tb/iUUT/reset_n
|
||||
add wave -noupdate /ch_ctrl_cfg_tb/iUUT/init
|
||||
add wave -noupdate /ch_ctrl_cfg_tb/iUUT/pd_in
|
||||
add wave -noupdate -radix decimal /ch_ctrl_cfg_tb/iUUT/abs_position
|
||||
add wave -noupdate /ch_ctrl_cfg_tb/iUUT/dp_dir
|
||||
add wave -noupdate /ch_ctrl_cfg_tb/iUUT/filtered_pd
|
||||
add wave -noupdate /ch_ctrl_cfg_tb/iUUT/ch_pd
|
||||
add wave -noupdate /ch_ctrl_cfg_tb/iUUT/ch_mask
|
||||
add wave -noupdate /ch_ctrl_cfg_tb/iUUT/enc_pulse
|
||||
add wave -noupdate -radix hexadecimal /ch_ctrl_cfg_tb/iUUT/avs_address
|
||||
add wave -noupdate /ch_ctrl_cfg_tb/iUUT/avs_write
|
||||
add wave -noupdate -radix hexadecimal /ch_ctrl_cfg_tb/iUUT/avs_writedata
|
||||
add wave -noupdate /ch_ctrl_cfg_tb/iUUT/avs_read
|
||||
add wave -noupdate /ch_ctrl_cfg_tb/iUUT/avs_readdatavalid
|
||||
add wave -noupdate -radix hexadecimal /ch_ctrl_cfg_tb/iUUT/avs_readdata
|
||||
add wave -noupdate /ch_ctrl_cfg_tb/iUUT/init_de
|
||||
add wave -noupdate /ch_ctrl_cfg_tb/iUUT/init_qd
|
||||
add wave -noupdate /ch_ctrl_cfg_tb/iUUT/enable
|
||||
add wave -noupdate /ch_ctrl_cfg_tb/iUUT/loc_pd
|
||||
add wave -noupdate /ch_ctrl_cfg_tb/iUUT/pd_queue_error
|
||||
add wave -noupdate /ch_ctrl_cfg_tb/iUUT/ch_ctrl_start_req
|
||||
add wave -noupdate /ch_ctrl_cfg_tb/iUUT/pd_pulse
|
||||
add wave -noupdate /ch_ctrl_cfg_tb/iUUT/filt_pd
|
||||
add wave -noupdate /ch_ctrl_cfg_tb/iUUT/filt_pd_d
|
||||
add wave -noupdate /ch_ctrl_cfg_tb/iUUT/ch_ctrl_write
|
||||
add wave -noupdate /ch_ctrl_cfg_tb/iUUT/ch_ctrl_read
|
||||
add wave -noupdate /ch_ctrl_cfg_tb/iUUT/ch_ctrl_busy
|
||||
add wave -noupdate /ch_ctrl_cfg_tb/iUUT/enable_i
|
||||
add wave -noupdate /ch_ctrl_cfg_tb/iUUT/ch_mask_i
|
||||
add wave -noupdate /ch_ctrl_cfg_tb/iUUT/bypass_ch_ctrl
|
||||
add wave -noupdate /ch_ctrl_cfg_tb/iUUT/bypass_delay_equal
|
||||
add wave -noupdate /ch_ctrl_cfg_tb/iUUT/div_pulse
|
||||
add wave -noupdate /ch_ctrl_cfg_tb/iUUT/gated_pulse
|
||||
add wave -noupdate /ch_ctrl_cfg_tb/iUUT/retimed_pulse
|
||||
add wave -noupdate /ch_ctrl_cfg_tb/iUUT/avs_write_i
|
||||
add wave -noupdate /ch_ctrl_cfg_tb/iUUT/avs_read_d
|
||||
add wave -noupdate /ch_ctrl_cfg_tb/iUUT/avs_read_i
|
||||
add wave -noupdate /ch_ctrl_cfg_tb/iUUT/de_queue_error
|
||||
add wave -noupdate /ch_ctrl_cfg_tb/iUUT/cnt_dir
|
||||
add wave -noupdate /ch_ctrl_cfg_tb/iUUT/dp_dir_i
|
||||
add wave -noupdate /ch_ctrl_cfg_tb/iUUT/ch_ctrl_start_req_i
|
||||
add wave -noupdate /ch_ctrl_cfg_tb/iUUT/set_first_pd
|
||||
add wave -noupdate /ch_ctrl_cfg_tb/iUUT/dp_dir_d
|
||||
add wave -noupdate /ch_ctrl_cfg_tb/iUUT/pulse_scale_out
|
||||
add wave -noupdate /ch_ctrl_cfg_tb/iUUT/start_img_req
|
||||
add wave -noupdate /ch_ctrl_cfg_tb/iUUT/start_img_req_d
|
||||
add wave -noupdate /ch_ctrl_cfg_tb/iUUT/start_img
|
||||
add wave -noupdate /ch_ctrl_cfg_tb/iUUT/start_img_d
|
||||
add wave -noupdate /ch_ctrl_cfg_tb/iUUT/start_img_dd
|
||||
add wave -noupdate /ch_ctrl_cfg_tb/iUUT/fire_enable
|
||||
add wave -noupdate /ch_ctrl_cfg_tb/iUUT/img_completed
|
||||
add wave -noupdate /ch_ctrl_cfg_tb/iUUT/sw_ctrl_dp_dir
|
||||
add wave -noupdate /ch_ctrl_cfg_tb/iUUT/enable_out
|
||||
add wave -noupdate /ch_ctrl_cfg_tb/iUUT/ch_ctrl_start_req_d
|
||||
add wave -noupdate /ch_ctrl_cfg_tb/iUUT/add_img_size
|
||||
add wave -noupdate /ch_ctrl_cfg_tb/iUUT/add_img_size_d
|
||||
add wave -noupdate /ch_ctrl_cfg_tb/iUUT/abort_fire
|
||||
add wave -noupdate /ch_ctrl_cfg_tb/iUUT/ch_ctrl_csr_write
|
||||
add wave -noupdate /ch_ctrl_cfg_tb/iUUT/ch_ctrl_csr_read
|
||||
add wave -noupdate /ch_ctrl_cfg_tb/iUUT/frac_div_en_i
|
||||
add wave -noupdate /ch_ctrl_cfg_tb/iUUT/upd_max_pos
|
||||
add wave -noupdate /ch_ctrl_cfg_tb/iUUT/upd_min_pos
|
||||
add wave -noupdate /ch_ctrl_cfg_tb/iUUT/frac_div_en
|
||||
add wave -noupdate /ch_ctrl_cfg_tb/iUUT/gen_filt_pd
|
||||
add wave -noupdate /ch_ctrl_cfg_tb/iUUT/upd_max_pos_i
|
||||
add wave -noupdate /ch_ctrl_cfg_tb/iUUT/upd_min_pos_i
|
||||
add wave -noupdate /ch_ctrl_cfg_tb/iUUT/dir_change
|
||||
add wave -noupdate /ch_ctrl_cfg_tb/iUUT/first_pd
|
||||
add wave -noupdate /ch_ctrl_cfg_tb/iUUT/pd_in_d
|
||||
add wave -noupdate /ch_ctrl_cfg_tb/iUUT/filt_pd_i
|
||||
add wave -noupdate /ch_ctrl_cfg_tb/iUUT/abs_pos_lsb
|
||||
add wave -noupdate /ch_ctrl_cfg_tb/iUUT/ch_ctrl_start_req_ii
|
||||
add wave -noupdate /ch_ctrl_cfg_tb/iUUT/prevent_div_restart
|
||||
add wave -noupdate /ch_ctrl_cfg_tb/iUUT/rst_jitter
|
||||
add wave -noupdate /ch_ctrl_cfg_tb/iUUT/rst_diag_regs
|
||||
add wave -noupdate /ch_ctrl_cfg_tb/iUUT/fire_req
|
||||
add wave -noupdate /ch_ctrl_cfg_tb/iUUT/mid_cross
|
||||
add wave -noupdate /ch_ctrl_cfg_tb/iUUT/mid_crossed
|
||||
add wave -noupdate /ch_ctrl_cfg_tb/iUUT/zero_cross
|
||||
add wave -noupdate /ch_ctrl_cfg_tb/iUUT/close_to_zero
|
||||
add wave -noupdate /ch_ctrl_cfg_tb/iUUT/close_to_mid
|
||||
add wave -noupdate /ch_ctrl_cfg_tb/iUUT/div_pulse_i
|
||||
add wave -noupdate /ch_ctrl_cfg_tb/iUUT/spitting_enable
|
||||
add wave -noupdate /ch_ctrl_cfg_tb/iUUT/spit_pulse
|
||||
add wave -noupdate /ch_ctrl_cfg_tb/iUUT/seq_bus_valid
|
||||
add wave -noupdate /ch_ctrl_cfg_tb/iUUT/spit_nco_msb
|
||||
add wave -noupdate /ch_ctrl_cfg_tb/iUUT/abs_pos_msb_old
|
||||
add wave -noupdate /ch_ctrl_cfg_tb/iUUT/ch_ctrl_csr_addr
|
||||
add wave -noupdate /ch_ctrl_cfg_tb/iUUT/ch_ctrl_trigger_in
|
||||
add wave -noupdate /ch_ctrl_cfg_tb/iUUT/avs_addr
|
||||
add wave -noupdate /ch_ctrl_cfg_tb/iUUT/init_v
|
||||
add wave -noupdate /ch_ctrl_cfg_tb/iUUT/ch_ctrl_start_addr
|
||||
add wave -noupdate /ch_ctrl_cfg_tb/iUUT/ch_ctrl_address
|
||||
add wave -noupdate /ch_ctrl_cfg_tb/iUUT/avs_address_i
|
||||
add wave -noupdate /ch_ctrl_cfg_tb/iUUT/img_size
|
||||
add wave -noupdate /ch_ctrl_cfg_tb/iUUT/pixel_cnt
|
||||
add wave -noupdate /ch_ctrl_cfg_tb/iUUT/ch_ctrl_vector_out
|
||||
add wave -noupdate -radix unsigned /ch_ctrl_cfg_tb/iUUT/ch_offset
|
||||
add wave -noupdate -radix unsigned /ch_ctrl_cfg_tb/iUUT/ch_delay
|
||||
add wave -noupdate -radix hexadecimal /ch_ctrl_cfg_tb/iUUT/avs_readdata_i
|
||||
add wave -noupdate -radix hexadecimal /ch_ctrl_cfg_tb/iUUT/ch_ctrl_writedata
|
||||
add wave -noupdate -radix hexadecimal /ch_ctrl_cfg_tb/iUUT/ch_ctrl_readdata
|
||||
add wave -noupdate -radix hexadecimal /ch_ctrl_cfg_tb/iUUT/ch_ctrl_csr_writedata
|
||||
add wave -noupdate -radix hexadecimal /ch_ctrl_cfg_tb/iUUT/ch_ctrl_csr_readdata
|
||||
add wave -noupdate -radix unsigned /ch_ctrl_cfg_tb/iUUT/ch_offset_dir0
|
||||
add wave -noupdate -radix unsigned /ch_ctrl_cfg_tb/iUUT/ch_offset_dir1
|
||||
add wave -noupdate -radix decimal /ch_ctrl_cfg_tb/iUUT/abs_pos_max
|
||||
add wave -noupdate -radix decimal /ch_ctrl_cfg_tb/iUUT/abs_pos_min
|
||||
add wave -noupdate -radix decimal /ch_ctrl_cfg_tb/iUUT/last_pd_pos
|
||||
add wave -noupdate -radix unsigned /ch_ctrl_cfg_tb/iUUT/fire_req_cnt
|
||||
add wave -noupdate -radix hexadecimal /ch_ctrl_cfg_tb/iUUT/seq_bus_data
|
||||
add wave -noupdate -radix hexadecimal /ch_ctrl_cfg_tb/iUUT/spit_nco
|
||||
add wave -noupdate -radix hexadecimal /ch_ctrl_cfg_tb/iUUT/spit_nco_inc
|
||||
add wave -noupdate -radix hexadecimal /ch_ctrl_cfg_tb/iUUT/div_ratio
|
||||
add wave -noupdate /ch_ctrl_cfg_tb/iUUT/div_ratio_i
|
||||
add wave -noupdate /ch_ctrl_cfg_tb/iUUT/div_ratio_corr
|
||||
add wave -noupdate -divider {PD Queue}
|
||||
add wave -noupdate /ch_ctrl_cfg_tb/iUUT/iPD_queue/USE_EXT_TIME
|
||||
add wave -noupdate /ch_ctrl_cfg_tb/iUUT/iPD_queue/QUEUE_SIZE
|
||||
add wave -noupdate /ch_ctrl_cfg_tb/iUUT/iPD_queue/rstN
|
||||
add wave -noupdate /ch_ctrl_cfg_tb/iUUT/iPD_queue/clk
|
||||
add wave -noupdate /ch_ctrl_cfg_tb/iUUT/iPD_queue/init
|
||||
add wave -noupdate /ch_ctrl_cfg_tb/iUUT/iPD_queue/cnt_dir
|
||||
add wave -noupdate -radix decimal /ch_ctrl_cfg_tb/iUUT/iPD_queue/delay
|
||||
add wave -noupdate /ch_ctrl_cfg_tb/iUUT/iPD_queue/ext_time
|
||||
add wave -noupdate /ch_ctrl_cfg_tb/iUUT/iPD_queue/wave_in
|
||||
add wave -noupdate /ch_ctrl_cfg_tb/iUUT/iPD_queue/wave_out
|
||||
add wave -noupdate /ch_ctrl_cfg_tb/iUUT/iPD_queue/ovf_error
|
||||
add wave -noupdate /ch_ctrl_cfg_tb/iUUT/iPD_queue/toggle_in
|
||||
add wave -noupdate /ch_ctrl_cfg_tb/iUUT/iPD_queue/toggle_out
|
||||
add wave -noupdate /ch_ctrl_cfg_tb/iUUT/iPD_queue/time_elapsed
|
||||
add wave -noupdate /ch_ctrl_cfg_tb/iUUT/iPD_queue/wave_in_d
|
||||
add wave -noupdate /ch_ctrl_cfg_tb/iUUT/iPD_queue/wave_out_i
|
||||
add wave -noupdate /ch_ctrl_cfg_tb/iUUT/iPD_queue/pending_trans
|
||||
add wave -noupdate /ch_ctrl_cfg_tb/iUUT/iPD_queue/fifo_rd_en
|
||||
add wave -noupdate /ch_ctrl_cfg_tb/iUUT/iPD_queue/fifo_empty
|
||||
add wave -noupdate /ch_ctrl_cfg_tb/iUUT/iPD_queue/fifo_full
|
||||
add wave -noupdate /ch_ctrl_cfg_tb/iUUT/iPD_queue/cnt_dir_i
|
||||
add wave -noupdate /ch_ctrl_cfg_tb/iUUT/iPD_queue/wave_out_i_d
|
||||
add wave -noupdate /ch_ctrl_cfg_tb/iUUT/iPD_queue/new_event
|
||||
add wave -noupdate /ch_ctrl_cfg_tb/iUUT/iPD_queue/wave_out_ii
|
||||
add wave -noupdate /ch_ctrl_cfg_tb/iUUT/iPD_queue/shf_enable
|
||||
add wave -noupdate /ch_ctrl_cfg_tb/iUUT/iPD_queue/delay_line
|
||||
add wave -noupdate /ch_ctrl_cfg_tb/iUUT/iPD_queue/local_time_d
|
||||
add wave -noupdate /ch_ctrl_cfg_tb/iUUT/iPD_queue/event_time
|
||||
TreeUpdate [SetDefaultTree]
|
||||
WaveRestoreCursors {{Cursor 1} {2135755000 ps} 0} {{Cursor 2} {15451360286 ps} 0}
|
||||
quietly wave cursor active 2
|
||||
configure wave -namecolwidth 293
|
||||
configure wave -valuecolwidth 216
|
||||
configure wave -justifyvalue left
|
||||
configure wave -signalnamewidth 0
|
||||
configure wave -snapdistance 10
|
||||
configure wave -datasetprefix 0
|
||||
configure wave -rowmargin 4
|
||||
configure wave -childrowmargin 2
|
||||
configure wave -gridoffset 0
|
||||
configure wave -gridperiod 1
|
||||
configure wave -griddelta 40
|
||||
configure wave -timeline 0
|
||||
configure wave -timelineunits ps
|
||||
update
|
||||
WaveRestoreZoom {17886802338 ps} {19427520930 ps}
|
||||
148
generic_ip/pulse_generator/3/sim/wave_pd_jitter.do
Normal file
148
generic_ip/pulse_generator/3/sim/wave_pd_jitter.do
Normal file
|
|
@ -0,0 +1,148 @@
|
|||
onerror {resume}
|
||||
quietly WaveActivateNextPane {} 0
|
||||
add wave -noupdate /pd_jitter_verify_tb/reset_n
|
||||
add wave -noupdate /pd_jitter_verify_tb/clk
|
||||
add wave -noupdate /pd_jitter_verify_tb/init
|
||||
add wave -noupdate /pd_jitter_verify_tb/pd_in
|
||||
add wave -noupdate -radix decimal /pd_jitter_verify_tb/abs_position
|
||||
add wave -noupdate /pd_jitter_verify_tb/dp_dir
|
||||
add wave -noupdate /pd_jitter_verify_tb/filtered_pd
|
||||
add wave -noupdate /pd_jitter_verify_tb/ch_pd
|
||||
add wave -noupdate /pd_jitter_verify_tb/pd_in_cnt
|
||||
add wave -noupdate /pd_jitter_verify_tb/pd_out_cnt
|
||||
add wave -noupdate /pd_jitter_verify_tb/ch_mask
|
||||
add wave -noupdate -radix hexadecimal /pd_jitter_verify_tb/avs_address
|
||||
add wave -noupdate /pd_jitter_verify_tb/avs_write
|
||||
add wave -noupdate -radix hexadecimal /pd_jitter_verify_tb/avs_writedata
|
||||
add wave -noupdate /pd_jitter_verify_tb/avs_read
|
||||
add wave -noupdate /pd_jitter_verify_tb/avs_readdatavalid
|
||||
add wave -noupdate -radix hexadecimal /pd_jitter_verify_tb/avs_readdata
|
||||
add wave -noupdate /pd_jitter_verify_tb/avs_m
|
||||
add wave -noupdate /pd_jitter_verify_tb/avs_s
|
||||
add wave -noupdate /pd_jitter_verify_tb/test_completed
|
||||
add wave -noupdate /pd_jitter_verify_tb/setup
|
||||
add wave -noupdate /pd_jitter_verify_tb/running
|
||||
add wave -noupdate /pd_jitter_verify_tb/error_flag
|
||||
add wave -noupdate /pd_jitter_verify_tb/passed
|
||||
add wave -noupdate /pd_jitter_verify_tb/failed
|
||||
add wave -noupdate /pd_jitter_verify_tb/iUUT/clk
|
||||
add wave -noupdate /pd_jitter_verify_tb/iUUT/reset_n
|
||||
add wave -noupdate /pd_jitter_verify_tb/iUUT/init
|
||||
add wave -noupdate /pd_jitter_verify_tb/iUUT/pd_in
|
||||
add wave -noupdate -radix decimal /pd_jitter_verify_tb/iUUT/abs_position
|
||||
add wave -noupdate /pd_jitter_verify_tb/iUUT/dp_dir
|
||||
add wave -noupdate /pd_jitter_verify_tb/iUUT/gen_filt_pd
|
||||
add wave -noupdate /pd_jitter_verify_tb/iUUT/filtered_pd
|
||||
add wave -noupdate /pd_jitter_verify_tb/iUUT/pd_pulse
|
||||
add wave -noupdate /pd_jitter_verify_tb/iUUT/first_pd
|
||||
add wave -noupdate /pd_jitter_verify_tb/iUUT/filt_pd
|
||||
add wave -noupdate /pd_jitter_verify_tb/iUUT/ch_pd
|
||||
add wave -noupdate -radix decimal /pd_jitter_verify_tb/iUUT/last_pd_pos
|
||||
add wave -noupdate /pd_jitter_verify_tb/iUUT/close_to_zero
|
||||
add wave -noupdate /pd_jitter_verify_tb/iUUT/close_to_mid
|
||||
add wave -noupdate /pd_jitter_verify_tb/iUUT/mid_cross
|
||||
add wave -noupdate /pd_jitter_verify_tb/iUUT/mid_crossed
|
||||
add wave -noupdate /pd_jitter_verify_tb/iUUT/zero_cross
|
||||
add wave -noupdate /pd_jitter_verify_tb/iUUT/abs_pos_msb_old
|
||||
add wave -noupdate /pd_jitter_verify_tb/iUUT/ch_mask
|
||||
add wave -noupdate -radix hexadecimal /pd_jitter_verify_tb/iUUT/avs_address
|
||||
add wave -noupdate /pd_jitter_verify_tb/iUUT/avs_write
|
||||
add wave -noupdate -radix hexadecimal /pd_jitter_verify_tb/iUUT/avs_writedata
|
||||
add wave -noupdate /pd_jitter_verify_tb/iUUT/avs_read
|
||||
add wave -noupdate /pd_jitter_verify_tb/iUUT/avs_readdatavalid
|
||||
add wave -noupdate -radix hexadecimal /pd_jitter_verify_tb/iUUT/avs_readdata
|
||||
add wave -noupdate /pd_jitter_verify_tb/iUUT/init_de
|
||||
add wave -noupdate /pd_jitter_verify_tb/iUUT/init_qd
|
||||
add wave -noupdate /pd_jitter_verify_tb/iUUT/enable
|
||||
add wave -noupdate /pd_jitter_verify_tb/iUUT/loc_pd
|
||||
add wave -noupdate /pd_jitter_verify_tb/iUUT/pd_queue_error
|
||||
add wave -noupdate /pd_jitter_verify_tb/iUUT/ch_ctrl_start_req
|
||||
add wave -noupdate /pd_jitter_verify_tb/iUUT/filt_pd_d
|
||||
add wave -noupdate /pd_jitter_verify_tb/iUUT/ch_ctrl_write
|
||||
add wave -noupdate /pd_jitter_verify_tb/iUUT/ch_ctrl_read
|
||||
add wave -noupdate /pd_jitter_verify_tb/iUUT/ch_ctrl_busy
|
||||
add wave -noupdate /pd_jitter_verify_tb/iUUT/enable_i
|
||||
add wave -noupdate /pd_jitter_verify_tb/iUUT/ch_mask_i
|
||||
add wave -noupdate /pd_jitter_verify_tb/iUUT/bypass_ch_ctrl
|
||||
add wave -noupdate /pd_jitter_verify_tb/iUUT/bypass_delay_equal
|
||||
add wave -noupdate /pd_jitter_verify_tb/iUUT/div_pulse
|
||||
add wave -noupdate /pd_jitter_verify_tb/iUUT/gated_pulse
|
||||
add wave -noupdate /pd_jitter_verify_tb/iUUT/retimed_pulse
|
||||
add wave -noupdate /pd_jitter_verify_tb/iUUT/avs_write_i
|
||||
add wave -noupdate /pd_jitter_verify_tb/iUUT/avs_read_d
|
||||
add wave -noupdate /pd_jitter_verify_tb/iUUT/avs_read_i
|
||||
add wave -noupdate /pd_jitter_verify_tb/iUUT/de_queue_error
|
||||
add wave -noupdate /pd_jitter_verify_tb/iUUT/cnt_dir
|
||||
add wave -noupdate /pd_jitter_verify_tb/iUUT/dp_dir_i
|
||||
add wave -noupdate /pd_jitter_verify_tb/iUUT/ch_ctrl_start_req_i
|
||||
add wave -noupdate /pd_jitter_verify_tb/iUUT/set_first_pd
|
||||
add wave -noupdate /pd_jitter_verify_tb/iUUT/dp_dir_d
|
||||
add wave -noupdate /pd_jitter_verify_tb/iUUT/pulse_scale_out
|
||||
add wave -noupdate /pd_jitter_verify_tb/iUUT/start_img_req
|
||||
add wave -noupdate /pd_jitter_verify_tb/iUUT/start_img_req_d
|
||||
add wave -noupdate /pd_jitter_verify_tb/iUUT/start_img
|
||||
add wave -noupdate /pd_jitter_verify_tb/iUUT/start_img_d
|
||||
add wave -noupdate /pd_jitter_verify_tb/iUUT/start_img_dd
|
||||
add wave -noupdate /pd_jitter_verify_tb/iUUT/fire_enable
|
||||
add wave -noupdate /pd_jitter_verify_tb/iUUT/img_completed
|
||||
add wave -noupdate /pd_jitter_verify_tb/iUUT/sw_ctrl_dp_dir
|
||||
add wave -noupdate /pd_jitter_verify_tb/iUUT/enable_out
|
||||
add wave -noupdate /pd_jitter_verify_tb/iUUT/ch_ctrl_start_req_d
|
||||
add wave -noupdate /pd_jitter_verify_tb/iUUT/add_img_size
|
||||
add wave -noupdate /pd_jitter_verify_tb/iUUT/add_img_size_d
|
||||
add wave -noupdate /pd_jitter_verify_tb/iUUT/abort_fire
|
||||
add wave -noupdate /pd_jitter_verify_tb/iUUT/ch_ctrl_csr_write
|
||||
add wave -noupdate /pd_jitter_verify_tb/iUUT/ch_ctrl_csr_read
|
||||
add wave -noupdate /pd_jitter_verify_tb/iUUT/frac_div_en_i
|
||||
add wave -noupdate /pd_jitter_verify_tb/iUUT/upd_max_pos
|
||||
add wave -noupdate /pd_jitter_verify_tb/iUUT/upd_min_pos
|
||||
add wave -noupdate /pd_jitter_verify_tb/iUUT/frac_div_en
|
||||
add wave -noupdate /pd_jitter_verify_tb/iUUT/upd_max_pos_i
|
||||
add wave -noupdate /pd_jitter_verify_tb/iUUT/upd_min_pos_i
|
||||
add wave -noupdate /pd_jitter_verify_tb/iUUT/dir_change
|
||||
add wave -noupdate /pd_jitter_verify_tb/iUUT/pd_in_d
|
||||
add wave -noupdate /pd_jitter_verify_tb/iUUT/filt_pd_i
|
||||
add wave -noupdate /pd_jitter_verify_tb/iUUT/abs_pos_lsb
|
||||
add wave -noupdate /pd_jitter_verify_tb/iUUT/ch_ctrl_start_req_ii
|
||||
add wave -noupdate /pd_jitter_verify_tb/iUUT/prevent_div_restart
|
||||
add wave -noupdate /pd_jitter_verify_tb/iUUT/rst_jitter
|
||||
add wave -noupdate /pd_jitter_verify_tb/iUUT/ch_ctrl_csr_addr
|
||||
add wave -noupdate /pd_jitter_verify_tb/iUUT/ch_ctrl_trigger_in
|
||||
add wave -noupdate /pd_jitter_verify_tb/iUUT/avs_addr
|
||||
add wave -noupdate /pd_jitter_verify_tb/iUUT/init_v
|
||||
add wave -noupdate /pd_jitter_verify_tb/iUUT/ch_ctrl_start_addr
|
||||
add wave -noupdate /pd_jitter_verify_tb/iUUT/ch_ctrl_address
|
||||
add wave -noupdate /pd_jitter_verify_tb/iUUT/avs_address_i
|
||||
add wave -noupdate /pd_jitter_verify_tb/iUUT/img_size
|
||||
add wave -noupdate /pd_jitter_verify_tb/iUUT/pixel_cnt
|
||||
add wave -noupdate /pd_jitter_verify_tb/iUUT/ch_ctrl_vector_out
|
||||
add wave -noupdate /pd_jitter_verify_tb/iUUT/ch_offset
|
||||
add wave -noupdate /pd_jitter_verify_tb/iUUT/ch_delay
|
||||
add wave -noupdate /pd_jitter_verify_tb/iUUT/avs_readdata_i
|
||||
add wave -noupdate /pd_jitter_verify_tb/iUUT/ch_ctrl_writedata
|
||||
add wave -noupdate /pd_jitter_verify_tb/iUUT/ch_ctrl_readdata
|
||||
add wave -noupdate /pd_jitter_verify_tb/iUUT/ch_ctrl_csr_writedata
|
||||
add wave -noupdate /pd_jitter_verify_tb/iUUT/ch_ctrl_csr_readdata
|
||||
add wave -noupdate /pd_jitter_verify_tb/iUUT/ch_offset_dir0
|
||||
add wave -noupdate /pd_jitter_verify_tb/iUUT/ch_offset_dir1
|
||||
add wave -noupdate /pd_jitter_verify_tb/iUUT/abs_pos_max
|
||||
add wave -noupdate /pd_jitter_verify_tb/iUUT/abs_pos_min
|
||||
add wave -noupdate /pd_jitter_verify_tb/iUUT/div_ratio
|
||||
TreeUpdate [SetDefaultTree]
|
||||
WaveRestoreCursors {{Cursor 1} {35005000 ps} 0}
|
||||
quietly wave cursor active 1
|
||||
configure wave -namecolwidth 281
|
||||
configure wave -valuecolwidth 146
|
||||
configure wave -justifyvalue left
|
||||
configure wave -signalnamewidth 0
|
||||
configure wave -snapdistance 10
|
||||
configure wave -datasetprefix 0
|
||||
configure wave -rowmargin 4
|
||||
configure wave -childrowmargin 2
|
||||
configure wave -gridoffset 0
|
||||
configure wave -gridperiod 1
|
||||
configure wave -griddelta 40
|
||||
configure wave -timeline 0
|
||||
configure wave -timelineunits ps
|
||||
update
|
||||
WaveRestoreZoom {85023836 ps} {100488220 ps}
|
||||
77
generic_ip/pulse_generator/3/sim/wave_simple_frac_div.do
Normal file
77
generic_ip/pulse_generator/3/sim/wave_simple_frac_div.do
Normal file
|
|
@ -0,0 +1,77 @@
|
|||
onerror {resume}
|
||||
quietly WaveActivateNextPane {} 0
|
||||
add wave -noupdate /simple_frac_div_tb/reset_n
|
||||
add wave -noupdate /simple_frac_div_tb/clk
|
||||
add wave -noupdate /simple_frac_div_tb/enable
|
||||
add wave -noupdate /simple_frac_div_tb/dir
|
||||
add wave -noupdate -radix hexadecimal /simple_frac_div_tb/offset
|
||||
add wave -noupdate -radix hexadecimal /simple_frac_div_tb/ratio
|
||||
add wave -noupdate -radix decimal /simple_frac_div_tb/abs_pos
|
||||
add wave -noupdate /simple_frac_div_tb/fire
|
||||
add wave -noupdate -radix unsigned /simple_frac_div_tb/fire_cnt
|
||||
add wave -noupdate /simple_frac_div_tb/div_ratio
|
||||
add wave -noupdate /simple_frac_div_tb/pixel_offset
|
||||
add wave -noupdate /simple_frac_div_tb/ideal_fire
|
||||
add wave -noupdate /simple_frac_div_tb/firing_error
|
||||
add wave -noupdate /simple_frac_div_tb/pos
|
||||
add wave -noupdate /simple_frac_div_tb/test_completed
|
||||
add wave -noupdate /simple_frac_div_tb/configuring
|
||||
add wave -noupdate /simple_frac_div_tb/running
|
||||
add wave -noupdate /simple_frac_div_tb/passed
|
||||
add wave -noupdate /simple_frac_div_tb/failed
|
||||
add wave -noupdate /simple_frac_div_tb/pTB_CTRL/delta_pos
|
||||
add wave -noupdate /simple_frac_div_tb/pTB_CTRL/init_pos
|
||||
add wave -noupdate /simple_frac_div_tb/pTB_CTRL/dir_m
|
||||
add wave -noupdate /simple_frac_div_tb/pTB_CTRL/tot_steps
|
||||
add wave -noupdate /simple_frac_div_tb/pTB_CTRL/result
|
||||
add wave -noupdate /simple_frac_div_tb/pTB_CTRL/test_idx
|
||||
add wave -noupdate /simple_frac_div_tb/iUUT/clk
|
||||
add wave -noupdate /simple_frac_div_tb/iUUT/enable
|
||||
add wave -noupdate /simple_frac_div_tb/iUUT/upd_max_pos
|
||||
add wave -noupdate /simple_frac_div_tb/iUUT/upd_min_pos
|
||||
add wave -noupdate -radix decimal /simple_frac_div_tb/iUUT/abs_pos_max
|
||||
add wave -noupdate -radix decimal /simple_frac_div_tb/iUUT/abs_pos_min
|
||||
add wave -noupdate /simple_frac_div_tb/iUUT/dir
|
||||
add wave -noupdate -radix hexadecimal /simple_frac_div_tb/iUUT/offset
|
||||
add wave -noupdate -radix hexadecimal /simple_frac_div_tb/iUUT/ratio
|
||||
add wave -noupdate -radix decimal /simple_frac_div_tb/iUUT/abs_pos
|
||||
add wave -noupdate /simple_frac_div_tb/iUUT/fire
|
||||
add wave -noupdate -radix unsigned /simple_frac_div_tb/iUUT/fire_cnt
|
||||
add wave -noupdate /simple_frac_div_tb/iUUT/enable_d
|
||||
add wave -noupdate /simple_frac_div_tb/iUUT/start
|
||||
add wave -noupdate /simple_frac_div_tb/iUUT/inc_pos
|
||||
add wave -noupdate /simple_frac_div_tb/iUUT/dec_pos
|
||||
add wave -noupdate /simple_frac_div_tb/iUUT/new_max
|
||||
add wave -noupdate /simple_frac_div_tb/iUUT/new_min
|
||||
add wave -noupdate /simple_frac_div_tb/iUUT/delta_wrap
|
||||
add wave -noupdate -radix decimal /simple_frac_div_tb/iUUT/pos_diff
|
||||
add wave -noupdate -radix decimal /simple_frac_div_tb/iUUT/pos_max
|
||||
add wave -noupdate -radix decimal /simple_frac_div_tb/iUUT/pos_min
|
||||
add wave -noupdate -radix decimal /simple_frac_div_tb/iUUT/dist_pos
|
||||
add wave -noupdate -radix decimal /simple_frac_div_tb/iUUT/dist_neg
|
||||
add wave -noupdate /simple_frac_div_tb/iUUT/update
|
||||
add wave -noupdate -radix unsigned /simple_frac_div_tb/iUUT/fire_cnt_i
|
||||
add wave -noupdate /simple_frac_div_tb/iUUT/zeros
|
||||
add wave -noupdate -radix unsigned /simple_frac_div_tb/iUUT/delta_pos
|
||||
add wave -noupdate -radix decimal /simple_frac_div_tb/iUUT/pos_diff
|
||||
add wave -noupdate -radix unsigned /simple_frac_div_tb/iUUT/abs_pos_d
|
||||
add wave -noupdate -radix decimal /simple_frac_div_tb/iUUT/ideal_fire
|
||||
add wave -noupdate -radix decimal /simple_frac_div_tb/iUUT/firing_error
|
||||
TreeUpdate [SetDefaultTree]
|
||||
WaveRestoreCursors {{Cursor 1} {212441 ps} 0}
|
||||
quietly wave cursor active 1
|
||||
configure wave -namecolwidth 266
|
||||
configure wave -valuecolwidth 182
|
||||
configure wave -justifyvalue left
|
||||
configure wave -signalnamewidth 0
|
||||
configure wave -snapdistance 10
|
||||
configure wave -datasetprefix 0
|
||||
configure wave -rowmargin 4
|
||||
configure wave -childrowmargin 2
|
||||
configure wave -gridoffset 0
|
||||
configure wave -gridperiod 1
|
||||
configure wave -griddelta 40
|
||||
configure wave -timeline 0
|
||||
configure wave -timelineunits ps
|
||||
update
|
||||
WaveRestoreZoom {3225966927 ps} {3226491215 ps}
|
||||
270
generic_ip/pulse_generator/3/sim/wave_tof_comp.do
Normal file
270
generic_ip/pulse_generator/3/sim/wave_tof_comp.do
Normal file
|
|
@ -0,0 +1,270 @@
|
|||
onerror {resume}
|
||||
quietly WaveActivateNextPane {} 0
|
||||
add wave -noupdate /tof_comp_tb/reset_n
|
||||
add wave -noupdate /tof_comp_tb/clk
|
||||
add wave -noupdate /tof_comp_tb/init
|
||||
add wave -noupdate /tof_comp_tb/pd_in
|
||||
add wave -noupdate -radix decimal /tof_comp_tb/abs_position
|
||||
add wave -noupdate /tof_comp_tb/dp_dir
|
||||
add wave -noupdate /tof_comp_tb/fire_req
|
||||
add wave -noupdate /tof_comp_tb/filtered_pd
|
||||
add wave -noupdate /tof_comp_tb/ch_pd
|
||||
add wave -noupdate /tof_comp_tb/ch_mask
|
||||
add wave -noupdate /tof_comp_tb/raw_fire_req
|
||||
add wave -noupdate /tof_comp_tb/avs_address
|
||||
add wave -noupdate /tof_comp_tb/avs_write
|
||||
add wave -noupdate /tof_comp_tb/avs_writedata
|
||||
add wave -noupdate /tof_comp_tb/avs_read
|
||||
add wave -noupdate /tof_comp_tb/avs_readdatavalid
|
||||
add wave -noupdate /tof_comp_tb/avs_readdata
|
||||
add wave -noupdate /tof_comp_tb/avs_m
|
||||
add wave -noupdate /tof_comp_tb/avs_s
|
||||
add wave -noupdate /tof_comp_tb/step_pos
|
||||
add wave -noupdate /tof_comp_tb/step_neg
|
||||
add wave -noupdate -radix decimal /tof_comp_tb/vel_meas
|
||||
add wave -noupdate -radix unsigned /tof_comp_tb/iUUT/tof_lut_addr
|
||||
add wave -noupdate -radix unsigned /tof_comp_tb/iUUT/tof_lut_comp
|
||||
add wave -noupdate -radix unsigned /tof_comp_tb/iUUT/ch_delay
|
||||
add wave -noupdate -radix unsigned /tof_comp_tb/iUUT/ch_delay_i
|
||||
add wave -noupdate /tof_comp_tb/end_of_stimuli
|
||||
add wave -noupdate /tof_comp_tb/test_completed
|
||||
add wave -noupdate /tof_comp_tb/setup
|
||||
add wave -noupdate /tof_comp_tb/running
|
||||
add wave -noupdate /tof_comp_tb/passed
|
||||
add wave -noupdate /tof_comp_tb/failed
|
||||
add wave -noupdate /tof_comp_tb/vel_meas_cnt
|
||||
add wave -noupdate /tof_comp_tb/vel_upd_flag
|
||||
add wave -noupdate /tof_comp_tb/iUUT/clk
|
||||
add wave -noupdate /tof_comp_tb/iUUT/reset_n
|
||||
add wave -noupdate /tof_comp_tb/iUUT/init
|
||||
add wave -noupdate /tof_comp_tb/iUUT/pd_in
|
||||
add wave -noupdate -radix decimal /tof_comp_tb/iUUT/abs_position
|
||||
add wave -noupdate /tof_comp_tb/fire_cnt
|
||||
add wave -noupdate /tof_comp_tb/raw_fire_cnt
|
||||
add wave -noupdate /tof_comp_tb/iUUT/dp_dir
|
||||
add wave -noupdate -radix decimal /tof_comp_tb/iUUT/enc_vel
|
||||
add wave -noupdate -radix hexadecimal /tof_comp_tb/iUUT/norm_enc_vel
|
||||
add wave -noupdate /tof_comp_tb/iUUT/fire_req
|
||||
add wave -noupdate /tof_comp_tb/iUUT/tof_comp_enable
|
||||
add wave -noupdate -radix unsigned /tof_comp_tb/iUUT/tof_lut_wr_addr
|
||||
add wave -noupdate -radix unsigned /tof_comp_tb/iUUT/tof_lut_addr
|
||||
add wave -noupdate -radix unsigned /tof_comp_tb/iUUT/ch_delay
|
||||
add wave -noupdate -radix unsigned /tof_comp_tb/iUUT/ch_delay_i
|
||||
add wave -noupdate /tof_comp_tb/iUUT/tof_saturation
|
||||
add wave -noupdate /tof_comp_tb/iUUT/tof_sat_flag
|
||||
add wave -noupdate /tof_comp_tb/iUUT/gated_pulse
|
||||
add wave -noupdate /tof_comp_tb/iUUT/retimed_pulse
|
||||
add wave -noupdate -radix unsigned /tof_comp_tb/iUUT/enc_speed_norm_coeff
|
||||
add wave -noupdate -radix hexadecimal /tof_comp_tb/iUUT/tof_lut_wr_data
|
||||
add wave -noupdate -radix unsigned /tof_comp_tb/iUUT/tof_lut_wr_q
|
||||
add wave -noupdate -radix unsigned /tof_comp_tb/iUUT/tof_lut_comp
|
||||
add wave -noupdate -radix unsigned /tof_comp_tb/iUUT/tof_lut_comp_i
|
||||
add wave -noupdate -radix decimal /tof_comp_tb/iVEL/vel_meas
|
||||
add wave -noupdate /tof_comp_tb/iVEL/sampling_pulse
|
||||
add wave -noupdate /tof_comp_tb/iUUT/filtered_pd
|
||||
add wave -noupdate /tof_comp_tb/iUUT/ch_pd
|
||||
add wave -noupdate /tof_comp_tb/iUUT/ch_mask
|
||||
add wave -noupdate /tof_comp_tb/iUUT/raw_fire_req
|
||||
add wave -noupdate /tof_comp_tb/iUUT/enc_pulse
|
||||
add wave -noupdate /tof_comp_tb/iUUT/avs_address
|
||||
add wave -noupdate /tof_comp_tb/iUUT/avs_write
|
||||
add wave -noupdate /tof_comp_tb/iUUT/avs_writedata
|
||||
add wave -noupdate /tof_comp_tb/iUUT/avs_read
|
||||
add wave -noupdate /tof_comp_tb/iUUT/avs_readdatavalid
|
||||
add wave -noupdate /tof_comp_tb/iUUT/avs_readdata
|
||||
add wave -noupdate /tof_comp_tb/iUUT/init_de
|
||||
add wave -noupdate /tof_comp_tb/iUUT/init_qd
|
||||
add wave -noupdate /tof_comp_tb/iUUT/enable
|
||||
add wave -noupdate /tof_comp_tb/iUUT/loc_pd
|
||||
add wave -noupdate /tof_comp_tb/iUUT/pd_queue_error
|
||||
add wave -noupdate /tof_comp_tb/iUUT/ch_ctrl_start_req
|
||||
add wave -noupdate /tof_comp_tb/iUUT/pd_pulse
|
||||
add wave -noupdate /tof_comp_tb/iUUT/filt_pd
|
||||
add wave -noupdate /tof_comp_tb/iUUT/filt_pd_d
|
||||
add wave -noupdate /tof_comp_tb/iUUT/ch_ctrl_write
|
||||
add wave -noupdate /tof_comp_tb/iUUT/ch_ctrl_read
|
||||
add wave -noupdate /tof_comp_tb/iUUT/ch_ctrl_busy
|
||||
add wave -noupdate /tof_comp_tb/iUUT/enable_i
|
||||
add wave -noupdate /tof_comp_tb/iUUT/ch_mask_i
|
||||
add wave -noupdate /tof_comp_tb/iUUT/bypass_ch_ctrl
|
||||
add wave -noupdate /tof_comp_tb/iUUT/bypass_delay_equal
|
||||
add wave -noupdate /tof_comp_tb/iUUT/div_pulse
|
||||
add wave -noupdate /tof_comp_tb/iUUT/gated_pulse
|
||||
add wave -noupdate /tof_comp_tb/iUUT/retimed_pulse
|
||||
add wave -noupdate /tof_comp_tb/iUUT/avs_write_i
|
||||
add wave -noupdate /tof_comp_tb/iUUT/avs_read_d
|
||||
add wave -noupdate /tof_comp_tb/iUUT/avs_read_i
|
||||
add wave -noupdate /tof_comp_tb/iUUT/de_queue_error
|
||||
add wave -noupdate /tof_comp_tb/iUUT/cnt_dir
|
||||
add wave -noupdate /tof_comp_tb/iUUT/dp_dir_i
|
||||
add wave -noupdate /tof_comp_tb/iUUT/ch_ctrl_start_req_i
|
||||
add wave -noupdate /tof_comp_tb/iUUT/set_first_pd
|
||||
add wave -noupdate /tof_comp_tb/iUUT/dp_dir_d
|
||||
add wave -noupdate /tof_comp_tb/iUUT/pulse_scale_out
|
||||
add wave -noupdate /tof_comp_tb/iUUT/start_img_req
|
||||
add wave -noupdate /tof_comp_tb/iUUT/start_img_req_d
|
||||
add wave -noupdate /tof_comp_tb/iUUT/start_img
|
||||
add wave -noupdate /tof_comp_tb/iUUT/start_img_d
|
||||
add wave -noupdate /tof_comp_tb/iUUT/start_img_dd
|
||||
add wave -noupdate /tof_comp_tb/iUUT/fire_enable
|
||||
add wave -noupdate /tof_comp_tb/iUUT/img_completed
|
||||
add wave -noupdate /tof_comp_tb/iUUT/sw_ctrl_dp_dir
|
||||
add wave -noupdate /tof_comp_tb/iUUT/enable_out
|
||||
add wave -noupdate /tof_comp_tb/iUUT/ch_ctrl_start_req_d
|
||||
add wave -noupdate /tof_comp_tb/iUUT/add_img_size
|
||||
add wave -noupdate /tof_comp_tb/iUUT/add_img_size_d
|
||||
add wave -noupdate /tof_comp_tb/iUUT/abort_fire
|
||||
add wave -noupdate /tof_comp_tb/iUUT/ch_ctrl_csr_write
|
||||
add wave -noupdate /tof_comp_tb/iUUT/ch_ctrl_csr_read
|
||||
add wave -noupdate /tof_comp_tb/iUUT/frac_div_en_i
|
||||
add wave -noupdate /tof_comp_tb/iUUT/upd_max_pos
|
||||
add wave -noupdate /tof_comp_tb/iUUT/upd_min_pos
|
||||
add wave -noupdate /tof_comp_tb/iUUT/frac_div_en
|
||||
add wave -noupdate /tof_comp_tb/iUUT/gen_filt_pd
|
||||
add wave -noupdate /tof_comp_tb/iUUT/upd_max_pos_i
|
||||
add wave -noupdate /tof_comp_tb/iUUT/upd_min_pos_i
|
||||
add wave -noupdate /tof_comp_tb/iUUT/dir_change
|
||||
add wave -noupdate /tof_comp_tb/iUUT/first_pd
|
||||
add wave -noupdate /tof_comp_tb/iUUT/pd_in_d
|
||||
add wave -noupdate /tof_comp_tb/iUUT/filt_pd_i
|
||||
add wave -noupdate /tof_comp_tb/iUUT/abs_pos_lsb
|
||||
add wave -noupdate /tof_comp_tb/iUUT/ch_ctrl_start_req_ii
|
||||
add wave -noupdate /tof_comp_tb/iUUT/prevent_div_restart
|
||||
add wave -noupdate /tof_comp_tb/iUUT/rst_jitter
|
||||
add wave -noupdate /tof_comp_tb/iUUT/rst_diag_regs
|
||||
add wave -noupdate /tof_comp_tb/iUUT/fire_req
|
||||
add wave -noupdate /tof_comp_tb/iUUT/mid_cross
|
||||
add wave -noupdate /tof_comp_tb/iUUT/mid_crossed
|
||||
add wave -noupdate /tof_comp_tb/iUUT/zero_cross
|
||||
add wave -noupdate /tof_comp_tb/iUUT/close_to_zero
|
||||
add wave -noupdate /tof_comp_tb/iUUT/close_to_mid
|
||||
add wave -noupdate /tof_comp_tb/iUUT/div_pulse_i
|
||||
add wave -noupdate /tof_comp_tb/iUUT/spitting_enable
|
||||
add wave -noupdate /tof_comp_tb/iUUT/spit_pulse
|
||||
add wave -noupdate /tof_comp_tb/iUUT/seq_bus_valid
|
||||
add wave -noupdate /tof_comp_tb/iUUT/spit_nco_msb
|
||||
add wave -noupdate /tof_comp_tb/iUUT/wh_apply_corr_en
|
||||
add wave -noupdate /tof_comp_tb/iUUT/wh_error_meas_avail
|
||||
add wave -noupdate /tof_comp_tb/iUUT/wh_corr_ready
|
||||
add wave -noupdate /tof_comp_tb/iUUT/wh_error_meas_started
|
||||
add wave -noupdate /tof_comp_tb/iUUT/init_wh
|
||||
add wave -noupdate /tof_comp_tb/iUUT/loc_pd_d
|
||||
add wave -noupdate /tof_comp_tb/iUUT/wh_meas_event
|
||||
add wave -noupdate /tof_comp_tb/iUUT/tof_lut_wr_en
|
||||
add wave -noupdate /tof_comp_tb/iUUT/tof_comp_enable
|
||||
add wave -noupdate /tof_comp_tb/iUUT/abs_pos_msb_old
|
||||
add wave -noupdate /tof_comp_tb/iUUT/ch_ctrl_csr_addr
|
||||
add wave -noupdate /tof_comp_tb/iUUT/ch_ctrl_trigger_in
|
||||
add wave -noupdate /tof_comp_tb/iUUT/wh_corr_ready_v
|
||||
add wave -noupdate /tof_comp_tb/iUUT/avs_addr
|
||||
add wave -noupdate /tof_comp_tb/iUUT/init_v
|
||||
add wave -noupdate /tof_comp_tb/iUUT/ch_ctrl_start_addr
|
||||
add wave -noupdate /tof_comp_tb/iUUT/ch_ctrl_address
|
||||
add wave -noupdate -radix unsigned /tof_comp_tb/iUUT/tof_lut_wr_addr
|
||||
add wave -noupdate -radix unsigned /tof_comp_tb/iUUT/tof_lut_addr
|
||||
add wave -noupdate -radix unsigned /tof_comp_tb/iUUT/tof_lut_comp
|
||||
add wave -noupdate -radix unsigned /tof_comp_tb/iUUT/tof_lut_comp_i
|
||||
add wave -noupdate -radix unsigned /tof_comp_tb/iUUT/ch_delay
|
||||
add wave -noupdate -radix unsigned /tof_comp_tb/iUUT/ch_delay_i
|
||||
add wave -noupdate /tof_comp_tb/iUUT/tof_saturation
|
||||
add wave -noupdate /tof_comp_tb/iUUT/tof_sat_flag
|
||||
add wave -noupdate /tof_comp_tb/iUUT/avs_address_i
|
||||
add wave -noupdate /tof_comp_tb/iUUT/enc_vel_i
|
||||
add wave -noupdate /tof_comp_tb/iUUT/wh_rotat_cnt
|
||||
add wave -noupdate /tof_comp_tb/iUUT/basic_pos_error
|
||||
add wave -noupdate /tof_comp_tb/iUUT/wh_loop_filt_tot
|
||||
add wave -noupdate /tof_comp_tb/iUUT/wh_loop_filt_delta
|
||||
add wave -noupdate -radix unsigned /tof_comp_tb/iUUT/enc_speed_norm_coeff
|
||||
add wave -noupdate -radix hexadecimal /tof_comp_tb/iUUT/tof_lut_wr_data
|
||||
add wave -noupdate -radix unsigned /tof_comp_tb/iUUT/tof_lut_wr_q
|
||||
add wave -noupdate /tof_comp_tb/iUUT/img_size
|
||||
add wave -noupdate /tof_comp_tb/iUUT/pixel_cnt
|
||||
add wave -noupdate /tof_comp_tb/iUUT/ch_ctrl_vector_out
|
||||
add wave -noupdate /tof_comp_tb/iUUT/wh_pos_err
|
||||
add wave -noupdate /tof_comp_tb/iUUT/wh_pos_err_max
|
||||
add wave -noupdate /tof_comp_tb/iUUT/wh_pos_err_old
|
||||
add wave -noupdate /tof_comp_tb/iUUT/wh_tot_err
|
||||
add wave -noupdate /tof_comp_tb/iUUT/wh_delta_err
|
||||
add wave -noupdate /tof_comp_tb/iUUT/norm_enc_vel
|
||||
add wave -noupdate /tof_comp_tb/iUUT/ch_offset
|
||||
add wave -noupdate -radix decimal /tof_comp_tb/iVEL/vel_meas
|
||||
add wave -noupdate /tof_comp_tb/iUUT/avs_readdata_i
|
||||
add wave -noupdate /tof_comp_tb/iUUT/ch_ctrl_writedata
|
||||
add wave -noupdate /tof_comp_tb/iUUT/ch_ctrl_readdata
|
||||
add wave -noupdate /tof_comp_tb/iUUT/ch_ctrl_csr_writedata
|
||||
add wave -noupdate /tof_comp_tb/iUUT/ch_ctrl_csr_readdata
|
||||
add wave -noupdate /tof_comp_tb/iUUT/ch_offset_dir0
|
||||
add wave -noupdate /tof_comp_tb/iUUT/ch_offset_dir1
|
||||
add wave -noupdate /tof_comp_tb/iUUT/abs_pos_max
|
||||
add wave -noupdate /tof_comp_tb/iUUT/abs_pos_min
|
||||
add wave -noupdate /tof_comp_tb/iUUT/last_pd_pos
|
||||
add wave -noupdate /tof_comp_tb/iUUT/fire_req_cnt
|
||||
add wave -noupdate /tof_comp_tb/iUUT/seq_bus_data
|
||||
add wave -noupdate /tof_comp_tb/iUUT/spit_nco
|
||||
add wave -noupdate /tof_comp_tb/iUUT/spit_nco_inc
|
||||
add wave -noupdate /tof_comp_tb/iUUT/start_pos
|
||||
add wave -noupdate /tof_comp_tb/iUUT/abs_pos_d
|
||||
add wave -noupdate /tof_comp_tb/iUUT/wh_pos_err_2_corr
|
||||
add wave -noupdate /tof_comp_tb/iUUT/div_ratio
|
||||
add wave -noupdate /tof_comp_tb/iUUT/div_ratio_i
|
||||
add wave -noupdate /tof_comp_tb/iUUT/div_ratio_corr
|
||||
add wave -noupdate /tof_comp_tb/iUUT/div_ratio_corr_new
|
||||
add wave -noupdate /tof_comp_tb/iUUT/pos_error
|
||||
add wave -noupdate /tof_comp_tb/iUUT/wh_loop_err
|
||||
add wave -noupdate /tof_comp_tb/iUUT/div_ratio_corr_ext
|
||||
add wave -noupdate /tof_comp_tb/iVEL/clk
|
||||
add wave -noupdate /tof_comp_tb/iVEL/init
|
||||
add wave -noupdate /tof_comp_tb/iVEL/step_pos
|
||||
add wave -noupdate /tof_comp_tb/iVEL/step_neg
|
||||
add wave -noupdate /tof_comp_tb/iVEL/init_i
|
||||
add wave -noupdate /tof_comp_tb/iVEL/sampling_pulse
|
||||
add wave -noupdate /tof_comp_tb/iVEL/sampling_per_cnt
|
||||
add wave -noupdate /tof_comp_tb/iVEL/vel_meas_i
|
||||
add wave -noupdate /tof_comp_tb/iVEL/vel_meas_sat_pos
|
||||
add wave -noupdate /tof_comp_tb/iVEL/vel_meas_sat_neg
|
||||
add wave -noupdate -divider {Delay Equalizer}
|
||||
add wave -noupdate /tof_comp_tb/iUUT/gPULSE_DELAY_EQUAL/iDE/rstN
|
||||
add wave -noupdate /tof_comp_tb/iUUT/gPULSE_DELAY_EQUAL/iDE/clk
|
||||
add wave -noupdate /tof_comp_tb/iUUT/gPULSE_DELAY_EQUAL/iDE/init
|
||||
add wave -noupdate /tof_comp_tb/iUUT/gPULSE_DELAY_EQUAL/iDE/cnt_dir
|
||||
add wave -noupdate -radix decimal /tof_comp_tb/iUUT/gPULSE_DELAY_EQUAL/iDE/delay
|
||||
add wave -noupdate /tof_comp_tb/iUUT/gPULSE_DELAY_EQUAL/iDE/ext_time
|
||||
add wave -noupdate /tof_comp_tb/iUUT/gPULSE_DELAY_EQUAL/iDE/wave_in
|
||||
add wave -noupdate /tof_comp_tb/iUUT/gPULSE_DELAY_EQUAL/iDE/wave_out
|
||||
add wave -noupdate /tof_comp_tb/iUUT/gPULSE_DELAY_EQUAL/iDE/ovf_error
|
||||
add wave -noupdate /tof_comp_tb/iUUT/gPULSE_DELAY_EQUAL/iDE/toggle_in
|
||||
add wave -noupdate /tof_comp_tb/iUUT/gPULSE_DELAY_EQUAL/iDE/toggle_out
|
||||
add wave -noupdate /tof_comp_tb/iUUT/gPULSE_DELAY_EQUAL/iDE/time_elapsed
|
||||
add wave -noupdate /tof_comp_tb/iUUT/gPULSE_DELAY_EQUAL/iDE/wave_in_d
|
||||
add wave -noupdate /tof_comp_tb/iUUT/gPULSE_DELAY_EQUAL/iDE/wave_out_i
|
||||
add wave -noupdate /tof_comp_tb/iUUT/gPULSE_DELAY_EQUAL/iDE/pending_trans
|
||||
add wave -noupdate /tof_comp_tb/iUUT/gPULSE_DELAY_EQUAL/iDE/fifo_rd_en
|
||||
add wave -noupdate /tof_comp_tb/iUUT/gPULSE_DELAY_EQUAL/iDE/fifo_empty
|
||||
add wave -noupdate /tof_comp_tb/iUUT/gPULSE_DELAY_EQUAL/iDE/fifo_full
|
||||
add wave -noupdate /tof_comp_tb/iUUT/gPULSE_DELAY_EQUAL/iDE/cnt_dir_i
|
||||
add wave -noupdate /tof_comp_tb/iUUT/gPULSE_DELAY_EQUAL/iDE/wave_out_i_d
|
||||
add wave -noupdate /tof_comp_tb/iUUT/gPULSE_DELAY_EQUAL/iDE/new_event
|
||||
add wave -noupdate /tof_comp_tb/iUUT/gPULSE_DELAY_EQUAL/iDE/wave_out_ii
|
||||
add wave -noupdate /tof_comp_tb/iUUT/gPULSE_DELAY_EQUAL/iDE/shf_enable
|
||||
add wave -noupdate /tof_comp_tb/iUUT/gPULSE_DELAY_EQUAL/iDE/delay_line
|
||||
add wave -noupdate -radix unsigned /tof_comp_tb/iUUT/gPULSE_DELAY_EQUAL/iDE/int_time
|
||||
add wave -noupdate /tof_comp_tb/iUUT/gPULSE_DELAY_EQUAL/iDE/local_time_d
|
||||
add wave -noupdate -radix unsigned /tof_comp_tb/iUUT/gPULSE_DELAY_EQUAL/iDE/event_time
|
||||
TreeUpdate [SetDefaultTree]
|
||||
WaveRestoreCursors {{Cursor 1} {10895000 ps} 0} {{Cursor 2} {121098274 ps} 0}
|
||||
quietly wave cursor active 1
|
||||
configure wave -namecolwidth 394
|
||||
configure wave -valuecolwidth 100
|
||||
configure wave -justifyvalue left
|
||||
configure wave -signalnamewidth 0
|
||||
configure wave -snapdistance 10
|
||||
configure wave -datasetprefix 0
|
||||
configure wave -rowmargin 4
|
||||
configure wave -childrowmargin 2
|
||||
configure wave -gridoffset 0
|
||||
configure wave -gridperiod 1
|
||||
configure wave -griddelta 40
|
||||
configure wave -timeline 0
|
||||
configure wave -timelineunits ps
|
||||
update
|
||||
WaveRestoreZoom {0 ps} {220244480 ps}
|
||||
1079
generic_ip/pulse_generator/3/src/pulse_generator_3.vhd
Normal file
1079
generic_ip/pulse_generator/3/src/pulse_generator_3.vhd
Normal file
File diff suppressed because it is too large
Load diff
65
generic_ip/pulse_generator/3/src/pulse_generator_3_pkg.vhd
Normal file
65
generic_ip/pulse_generator/3/src/pulse_generator_3_pkg.vhd
Normal file
|
|
@ -0,0 +1,65 @@
|
|||
-------------------------------------------------------------------------------
|
||||
-- Title : pulse_generator_3_pkg
|
||||
-- Project : SMB/Encoder Simulation board
|
||||
-------------------------------------------------------------------------------
|
||||
-- File : pulse_generator_3_pkg.vhd
|
||||
-- Author : GMG
|
||||
-- Company : Global Inkjet Systems
|
||||
-- Created : 2018-08-22
|
||||
-- Last update: 2020-04-15
|
||||
-- SVN ID : Git
|
||||
-- Standard : VHDL'2008
|
||||
-------------------------------------------------------------------------------
|
||||
-- Description:
|
||||
-- Package defining common constants for the pulse generator
|
||||
-------------------------------------------------------------------------------
|
||||
-- altera vhdl_input_version vhdl_2008
|
||||
|
||||
library ieee;
|
||||
use ieee.std_logic_1164.all;
|
||||
use ieee.numeric_std.all;
|
||||
|
||||
package pulse_generator_3_pkg is
|
||||
|
||||
constant CSR_IP_ID_ADDR : std_logic_vector(4 downto 0) := 5x"00";
|
||||
constant CSR_IP_VER_ADDR : std_logic_vector(4 downto 0) := 5x"01";
|
||||
constant PULSE_GEN_CTRL_REG : std_logic_vector(4 downto 0) := 5x"02";
|
||||
constant CH_OFFSET_D0_REG : std_logic_vector(4 downto 0) := 5x"03";
|
||||
constant CH_OFFSET_D1_REG : std_logic_vector(4 downto 0) := 5x"04";
|
||||
constant CH_DELAY_REG : std_logic_vector(4 downto 0) := 5x"05";
|
||||
constant CH_CTRL_CTRL_REG : std_logic_vector(4 downto 0) := 5x"06";
|
||||
constant FRAC_DIV_CTRL_REG : std_logic_vector(4 downto 0) := 5x"07";
|
||||
constant PULSE_WIDTH_REG : std_logic_vector(4 downto 0) := 5x"08";
|
||||
constant UNUSED_0 : std_logic_vector(4 downto 0) := 5x"09";
|
||||
constant UNUSED_1 : std_logic_vector(4 downto 0) := 5x"0A";
|
||||
constant DIV_RATIO_INT : std_logic_vector(4 downto 0) := 5x"0B";
|
||||
constant DIV_RATIO_FRAC : std_logic_vector(4 downto 0) := 5x"0C";
|
||||
constant SUBPIXEL_PHASE_REG : std_logic_vector(4 downto 0) := 5x"0D";
|
||||
constant UNUSED_2 : std_logic_vector(4 downto 0) := 5x"0E";
|
||||
constant POS_MAX_REG : std_logic_vector(4 downto 0) := 5x"0F";
|
||||
constant POS_MIN_REG : std_logic_vector(4 downto 0) := 5x"10";
|
||||
constant ABS_POS_STAT : std_logic_vector(4 downto 0) := 5x"11";
|
||||
constant PD_CNT_REG : std_logic_vector(4 downto 0) := 5x"12";
|
||||
constant FIRE_REQ_CNT_REG : std_logic_vector(4 downto 0) := 5x"13";
|
||||
constant ENC_SPEED_MEAS_W_REG : std_logic_vector(4 downto 0) := 5x"14";
|
||||
constant ENC_SPEED_REG : std_logic_vector(4 downto 0) := 5x"15";
|
||||
constant TOF_COMPENSATION_REG : std_logic_vector(4 downto 0) := 5x"16";
|
||||
constant WH_PIXEL_NUM : std_logic_vector(4 downto 0) := 5x"17";
|
||||
constant WH_POS_ERR_2_CORR_REG : std_logic_vector(4 downto 0) := 5x"18";
|
||||
constant WH_SKIP_CORR_THRES_REG : std_logic_vector(4 downto 0) := 5x"19";
|
||||
constant WH_LOOP_FILT_COEFF : std_logic_vector(4 downto 0) := 5x"1A";
|
||||
constant WH_POS_ERR_CURR_REG : std_logic_vector(4 downto 0) := 5x"1B";
|
||||
constant WH_POS_ERR_MAX_REG : std_logic_vector(4 downto 0) := 5x"1C";
|
||||
constant WH_POS_ERR_MIN_REG : std_logic_vector(4 downto 0) := 5x"1D";
|
||||
constant WH_DIV_RATIO_CORR_REG : std_logic_vector(4 downto 0) := 5x"1E";
|
||||
constant WH_CORR_CNT_REG : std_logic_vector(4 downto 0) := 5x"1F";
|
||||
|
||||
constant SEQ_CSR_OFFSET : std_logic_vector(10 downto 0) := 11x"20";
|
||||
constant SEQ_RAM_OFFSET : std_logic_vector(10 downto 0) := 11x"200";
|
||||
|
||||
constant TOF_COMP_LUT_OFFSET : std_logic_vector(10 downto 0) := 11x"400";
|
||||
constant TOF_COMP_LUT_DEPTH : natural := 512;
|
||||
constant TOF_COMP_LUT_WIDTH : natural := 16;
|
||||
|
||||
|
||||
end package pulse_generator_3_pkg;
|
||||
166
generic_ip/pulse_generator/3/src/simple_frac_div_3.vhd
Normal file
166
generic_ip/pulse_generator/3/src/simple_frac_div_3.vhd
Normal file
|
|
@ -0,0 +1,166 @@
|
|||
-------------------------------------------------------------------------------
|
||||
-- Title : simple_frac_div_3
|
||||
-- Project : EMB-1
|
||||
-------------------------------------------------------------------------------
|
||||
-- File : simple_frac_div_3.vhd
|
||||
-- Author : Gianmarco Girau
|
||||
-- Company : Global Inkjet Systems
|
||||
-- Created : 2017-12-04
|
||||
-- Last update: 2019-12-02
|
||||
-- SVN ID : Git
|
||||
-- Standard : VHDL'2008
|
||||
-------------------------------------------------------------------------------
|
||||
-- Description:
|
||||
-- Simple Fractional Divider: this version of the fractional divider identifies
|
||||
-- the optimal encoder position to generate a fire-pulse, but it does not
|
||||
-- identy the optimal fire time. Therefore the resulting resolution is equal to
|
||||
-- +/-1/2 encoder pulse.
|
||||
-- The identification of the optimal absolute position for the fire request
|
||||
-- employs an iterative algorithm which checks, for every increment of the
|
||||
-- absolute position, in the intended direction, whether the position error at
|
||||
-- the current position is lower than the error at the next position. If the
|
||||
-- result of the check is positive, the fire request will be issued at the
|
||||
-- current absolute position, otherwise the check is repeated at the next step.
|
||||
-------------------------------------------------------------------------------
|
||||
-- altera vhdl_input_version vhdl_2008
|
||||
|
||||
library ieee;
|
||||
use ieee.std_logic_1164.all;
|
||||
use ieee.numeric_std.all;
|
||||
|
||||
entity simple_frac_div_3 is
|
||||
port(
|
||||
clk : in std_logic;
|
||||
enable : in std_logic;
|
||||
upd_max_pos : in std_logic;
|
||||
upd_min_pos : in std_logic;
|
||||
abs_pos_max : out std_logic_vector(31 downto 0);
|
||||
abs_pos_min : out std_logic_vector(31 downto 0);
|
||||
dir : in std_logic;
|
||||
offset : in std_logic_vector(33 downto 0);
|
||||
ratio : in std_logic_vector(33 downto 0);
|
||||
abs_pos : in std_logic_vector(31 downto 0);
|
||||
enc_pulse : out std_logic;
|
||||
fire : out std_logic;
|
||||
fire_cnt : out std_logic_vector(31 downto 0));
|
||||
end entity simple_frac_div_3;
|
||||
|
||||
architecture rtl of simple_frac_div_3 is
|
||||
|
||||
signal enable_d, start : std_logic;
|
||||
signal update, fire_gen : std_logic;
|
||||
signal inc_pos, dec_pos : std_logic;
|
||||
signal new_max, new_min : std_logic;
|
||||
signal delta_wrap, start_d : std_logic;
|
||||
signal check_first : std_logic;
|
||||
signal check_others : std_logic;
|
||||
signal firing_error_comp : std_logic;
|
||||
signal firing_error_is_0 : std_logic;
|
||||
signal firing_error_is_1 : std_logic;
|
||||
--
|
||||
signal zeros, delta_pos : std_logic_vector(15 downto 0);
|
||||
signal fire_cnt_i : std_logic_vector(31 downto 0);
|
||||
signal pos_diff : std_logic_vector(31 downto 0);
|
||||
signal pos_max, pos_min : std_logic_vector(31 downto 0);
|
||||
signal dist_pos, dist_neg : std_logic_vector(31 downto 0);
|
||||
signal abs_pos_d : std_logic_vector(31 downto 0);
|
||||
signal ideal_fire : std_logic_vector(49 downto 0);
|
||||
signal firing_error : std_logic_vector(49 downto 0);
|
||||
|
||||
begin
|
||||
|
||||
zeros <= (others => '0');
|
||||
|
||||
-----------------------------------------------------------------------------
|
||||
-- Min/Max Absolute Position Tracking (and jitter rejection)
|
||||
-----------------------------------------------------------------------------
|
||||
|
||||
pPOS_TRACK : process(clk)
|
||||
begin
|
||||
if(clk = '1' and clk'event) then
|
||||
abs_pos_d <= abs_pos;
|
||||
if(new_max = '1' or upd_max_pos = '1') then
|
||||
pos_max <= abs_pos;
|
||||
end if;
|
||||
if(new_min = '1' or upd_min_pos = '1') then
|
||||
pos_min <= abs_pos;
|
||||
end if;
|
||||
-- enc_pulse output replaces the enc_out from the EMS, because the EMS
|
||||
-- does not support encoder jitter tracking anymore.
|
||||
-- Note: because of the absolute position, enc_pulse is redundant and
|
||||
-- used only for diagnostic purpose.
|
||||
enc_pulse <= (new_max and not dir) or (new_min and dir);
|
||||
end if;
|
||||
end process pPOS_TRACK;
|
||||
|
||||
pos_diff <= std_logic_vector(signed(abs_pos) - signed(abs_pos_d));
|
||||
|
||||
dist_pos <= std_logic_vector(signed(abs_pos)-signed(pos_max));
|
||||
dist_neg <= std_logic_vector(signed(pos_min)-signed(abs_pos));
|
||||
|
||||
inc_pos <= '1' when pos_diff(31) = '0' and pos_diff(2 downto 0) = "001" else '0';
|
||||
dec_pos <= '1' when pos_diff(31) = '1' and pos_diff(2 downto 0) = "111" else '0';
|
||||
|
||||
new_max <= '1' when inc_pos = '1' and dir = '0' and dist_pos(31) = '0' and unsigned(dist_pos(3 downto 0)) /= 0 else '0';
|
||||
new_min <= '1' when dec_pos = '1' and dir = '1' and dist_neg(31) = '0' and unsigned(dist_neg(3 downto 0)) /= 0 else '0';
|
||||
|
||||
abs_pos_min <= pos_min;
|
||||
abs_pos_max <= pos_max;
|
||||
|
||||
-----------------------------------------------------------------------------
|
||||
-- Fractional Divider Logic
|
||||
-----------------------------------------------------------------------------
|
||||
|
||||
pFD_REGs : process(clk)
|
||||
begin
|
||||
if(clk = '1' and clk'event) then
|
||||
enable_d <= enable;
|
||||
start_d <= start;
|
||||
if(enable = '0') then
|
||||
delta_pos <= (others => '0');
|
||||
elsif(delta_wrap = '1') then
|
||||
-- Decrement delta_pos of 64
|
||||
delta_pos <= (6 => '1', others => '0');
|
||||
elsif(new_min = '1' or new_max = '1') then
|
||||
delta_pos <= std_logic_vector(unsigned(delta_pos)+1);
|
||||
end if;
|
||||
if(unsigned(delta_pos) = 127 and update = '1') then
|
||||
delta_wrap <= '1';
|
||||
else
|
||||
delta_wrap <= '0';
|
||||
end if;
|
||||
-- ideal_fire: represents the ideal fire position (normalized 2**RATIO_FRACT_W)
|
||||
if(start = '1') then
|
||||
ideal_fire <= zeros & offset;
|
||||
elsif(fire_gen = '1') then
|
||||
ideal_fire <= std_logic_vector(unsigned(ideal_fire)+unsigned(ratio));
|
||||
elsif(delta_wrap = '1') then
|
||||
-- Decrement delta_pos of 64 (normalized 2**RATIO_FRACT_W)
|
||||
--ideal_fire <= std_logic_vector(unsigned(ideal_fire)- X"3F000000");
|
||||
ideal_fire <= ideal_fire(ideal_fire'left downto 36) & std_logic_vector(unsigned(ideal_fire(35 downto 24))- 12X"03F") & ideal_fire(23 downto 0);
|
||||
end if;
|
||||
firing_error <= std_logic_vector(unsigned(ideal_fire(ideal_fire'left downto 24)) - unsigned(delta_pos)) & X"000000";
|
||||
update <= enable and (start_d or new_min or new_max);
|
||||
check_first <= enable and start_d;
|
||||
check_others <= enable and (new_min or new_max);
|
||||
fire <= fire_gen;
|
||||
if(enable = '0') then
|
||||
fire_cnt_i <= (others => '0');
|
||||
elsif(fire_gen = '1') then
|
||||
fire_cnt_i <= std_logic_vector(unsigned(fire_cnt_i)+1);
|
||||
end if;
|
||||
end if;
|
||||
end process pFD_REGs;
|
||||
|
||||
-- firing_error_comp is asserted when firing_error(firing_error'left downto 24) is
|
||||
-- either 0 or 1:
|
||||
firing_error_comp <= '1' when unsigned(firing_error(firing_error'left downto 25)) = 0 else '0';
|
||||
firing_error_is_0 <= firing_error_comp and (not firing_error(24));
|
||||
firing_error_is_1 <= firing_error_comp and firing_error(24);
|
||||
fire_gen <= '1' when (check_first = '1' and firing_error_is_0 = '1') or (check_others = '1' and firing_error_is_1 = '1') else '0';
|
||||
|
||||
start <= enable and not enable_d;
|
||||
|
||||
fire_cnt <= fire_cnt_i;
|
||||
|
||||
end architecture rtl;
|
||||
256
generic_ip/pulse_generator/3/src/test/ch_ctrl_cfg0.cfg
Normal file
256
generic_ip/pulse_generator/3/src/test/ch_ctrl_cfg0.cfg
Normal file
|
|
@ -0,0 +1,256 @@
|
|||
30000000
|
||||
1000000F
|
||||
C0000003
|
||||
C0000004
|
||||
30000001
|
||||
30000000
|
||||
20000001
|
||||
C0000008
|
||||
30006424
|
||||
30006400
|
||||
81000032
|
||||
23000001
|
||||
30000000
|
||||
C000000E
|
||||
C000000F
|
||||
30000011
|
||||
30000010
|
||||
23000001
|
||||
C0000013
|
||||
30006434
|
||||
30006410
|
||||
81000032
|
||||
23000001
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
256
generic_ip/pulse_generator/3/src/test/ch_ctrl_cfg1.cfg
Normal file
256
generic_ip/pulse_generator/3/src/test/ch_ctrl_cfg1.cfg
Normal file
|
|
@ -0,0 +1,256 @@
|
|||
30000000
|
||||
1000000F
|
||||
C0000003
|
||||
C0000004
|
||||
30000001
|
||||
30000000
|
||||
20000001
|
||||
C0000008
|
||||
30006424
|
||||
30006400
|
||||
81000032
|
||||
23000001
|
||||
30000000
|
||||
C000000E
|
||||
C000000F
|
||||
30000011
|
||||
30000010
|
||||
23000001
|
||||
C0000013
|
||||
30006434
|
||||
30006410
|
||||
81000032
|
||||
23000001
|
||||
C0000013
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
256
generic_ip/pulse_generator/3/src/test/ch_ctrl_cfg2.cfg
Normal file
256
generic_ip/pulse_generator/3/src/test/ch_ctrl_cfg2.cfg
Normal file
|
|
@ -0,0 +1,256 @@
|
|||
30000000
|
||||
1000000F
|
||||
C0000003
|
||||
C0000004
|
||||
30000000
|
||||
30000000
|
||||
20000001
|
||||
C0000008
|
||||
30006424
|
||||
30006400
|
||||
81000032
|
||||
23000001
|
||||
30000000
|
||||
C000000E
|
||||
C000000F
|
||||
30000010
|
||||
30000010
|
||||
23000001
|
||||
C0000013
|
||||
30006434
|
||||
30006410
|
||||
81000032
|
||||
23000001
|
||||
C0000013
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
00000000
|
||||
863
generic_ip/pulse_generator/3/src/test/ch_ctrl_cfg_tb.vhd
Normal file
863
generic_ip/pulse_generator/3/src/test/ch_ctrl_cfg_tb.vhd
Normal file
|
|
@ -0,0 +1,863 @@
|
|||
-------------------------------------------------------------------------------
|
||||
-- Title : ch_ctrl_cfg_tb
|
||||
-- Project : Pulse-Generator
|
||||
-------------------------------------------------------------------------------
|
||||
-- File : ch_ctrl_cfg_tb.vhd
|
||||
-- Author : GMG
|
||||
-- Company : Global Inkjet Systems
|
||||
-- Created : 2019-05-17
|
||||
-- Last update: 2020-04-15
|
||||
-- SVN ID : Git
|
||||
-- Standard : VHDL'2008
|
||||
-------------------------------------------------------------------------------
|
||||
-- Description:
|
||||
-- Allows to verify Pulse-Generator with customs Ch-Ctrl configurations
|
||||
-------------------------------------------------------------------------------
|
||||
|
||||
library std;
|
||||
use std.textio.all;
|
||||
|
||||
library ieee;
|
||||
use ieee.std_logic_1164.all;
|
||||
use ieee.numeric_std.all;
|
||||
use ieee.std_logic_textio.all;
|
||||
use ieee.math_real.all;
|
||||
|
||||
use work.log_pkg.all;
|
||||
use work.avalon_verify_pkg.all;
|
||||
|
||||
use work.pulse_generator_3_pkg.all;
|
||||
|
||||
entity ch_ctrl_cfg_tb is
|
||||
-- ..
|
||||
end entity ch_ctrl_cfg_tb;
|
||||
|
||||
architecture behav of ch_ctrl_cfg_tb is
|
||||
|
||||
constant CLK_PERIOD : time := 10 ns;
|
||||
|
||||
-- Logging Verbosity Level
|
||||
constant VERBOSITY_LEVEL : verb_level_t := VMEDIUM;
|
||||
|
||||
constant seq_config_file : string := "./../src/test/ch_ctrl_cfg2.cfg";
|
||||
|
||||
type cfg_data_t is array (natural range <>) of std_logic_vector(31 downto 0);
|
||||
|
||||
constant SEQ_SIZE : natural := 256;
|
||||
|
||||
subtype seq_cfg_data_t is cfg_data_t(0 to SEQ_SIZE-1);
|
||||
|
||||
-- Total number of wheel rotations to simulate
|
||||
constant TOTAL_ROTATIONS : natural := 100;
|
||||
-- DIV_RATIO: head-pitch/ encoder-global-resolution
|
||||
constant DIV_RATIO : real := 4.23;
|
||||
-- Nominal image size, in pixel
|
||||
constant IMG_LEN : natural := 100;
|
||||
-- Nominal Distance between PDs, in encoder pulses, which corresponds to the
|
||||
-- wheel circumference
|
||||
constant WHEEL_CIRCUM : real := real(IMG_LEN)*DIV_RATIO;
|
||||
|
||||
-- number of Rotations before stopping the simulation
|
||||
-- constant SIM_ROTATIONS : natural := TOTAL_ROTATIONS;
|
||||
constant SIM_ROTATIONS : natural := 90;
|
||||
|
||||
constant APPLY_CORR_EN : boolean := true;
|
||||
constant APPLY_EMUL_CORR : boolean := false;
|
||||
constant SKIP_PD_EN : boolean := true;
|
||||
|
||||
constant PD_OFFSET : natural := 10;
|
||||
|
||||
constant HALF_RNG_CROSS : std_logic_vector(31 downto 0) := X"7FFFFFFF";
|
||||
constant FULL_RNG_CROSS : std_logic_vector(31 downto 0) := X"FFFFFFFF";
|
||||
--constant INIT_ABS_POS : std_logic_vector(31 downto 0) := std_logic_vector(signed(HALF_RNG_CROSS)-50 -PD_OFFSET);
|
||||
--constant INIT_ABS_POS : std_logic_vector(31 downto 0) := std_logic_vector(signed(HALF_RNG_CROSS)-421 -PD_OFFSET);
|
||||
constant INIT_ABS_POS : std_logic_vector(31 downto 0) := std_logic_vector(signed(FULL_RNG_CROSS)-421 -PD_OFFSET);
|
||||
--constant INIT_ABS_POS : std_logic_vector(31 downto 0) := (others => '0');
|
||||
|
||||
-- Correction Loop Filter constants
|
||||
constant LOOP_FILT_DELTA : real := 1.0;
|
||||
constant LOOP_FILT_TOT : real := 1.0;
|
||||
|
||||
|
||||
type wheel_error_t is array (0 to TOTAL_ROTATIONS-1) of integer;
|
||||
|
||||
/*
|
||||
signal wheel_error : wheel_error_t := (
|
||||
0, 0, 0, 0, 0, 1, 1, 1, 1, 1,
|
||||
2, 2, 3, 3, 4, 4, 5, 5, 4, 4,
|
||||
3, 3, 2, 2, 1, 1, 0, 0, -1, -1,
|
||||
-2, -2, -3, -3, -4, -4, -5, -5, -4, -4,
|
||||
-3, -3, -2, -2, -1, -1, 0, 0, 0, 0,
|
||||
0, 0, 0, 0, 0, 1, 0, 0, -1, 0, 1, 1,
|
||||
1, 1, 0, 0, -1, -1, -1, -1, 0, 0, others => 0);
|
||||
*/
|
||||
|
||||
/*
|
||||
signal wheel_error : wheel_error_t := (
|
||||
0, 0, 0, 0, 0, 1, 1, 1, 1, 1,
|
||||
2, 2, 3, 3, 4, 4, 5, 5, 4, 4,
|
||||
3, 3, 2, 2, 1, 1, 0, 0, -1, -1,
|
||||
-2, -2, -3, -3, -4, -4, -5, -5, -4, -4,
|
||||
-3, -3, -2, -2, -1, -1, 0, 0, 0, 0,
|
||||
0, 0, 0, 0, 0, 1, 0, 0, -1, 0, 1, 1,
|
||||
1, 1, 0, 0, -1, -1, -1, -1, 0, 0, -40, 0, 0, +80, others => 0);
|
||||
*/
|
||||
|
||||
/*
|
||||
signal wheel_error : wheel_error_t := (
|
||||
0, 0, 0, 0, 0, -1, -1, -1, -1, -1,
|
||||
-2, -2, -3, -3, -4, -4, -5, -5, -4, -4,
|
||||
-3, -3, -2, -2, -1, -1, 0, 0, 1, 1,
|
||||
2, 2, 3, 3, 4, 4, 5, 5, 4, 4,
|
||||
3, 3, 2, 2, 1, 1, 0, 0, 0, 0,
|
||||
0, 0, 0, 0, 0, 1, 0, 0, -1, 0, 1, 1,
|
||||
1, 1, 0, 0, -1, -1, -1, -1, 0, 0, -40, 0, 0, +80, others => 0);
|
||||
*/
|
||||
|
||||
/*
|
||||
signal wheel_error : wheel_error_t := (
|
||||
0, 0, 0, 0, 0, 1, 1, 1, 1, 1,
|
||||
2, 2, 3, 3, 4, 4, 5, 5, 4, 4,
|
||||
3, 3, 2, 2, 1, 1, 0, 0, -1, -1,
|
||||
-2, -2, -3, -3, -4, -4, -5, -5, -4, -4,
|
||||
-3, -3, -2, -2, -1, -1, 0, 0, 0, 0,
|
||||
0, 0, 0, 0, 0, 1, 0, 0, -1, 0, 1, 1,
|
||||
1, 1, 0, 0, -1, -1, -1, -1, 0, 0, -40, 0, 0, +80, others => +40);
|
||||
*/
|
||||
|
||||
signal wheel_error : wheel_error_t := (
|
||||
0, 0, 0, 0, 0, 1, 1, 1, 1, 1,
|
||||
2, 2, 3, 3, 4, 4, 5, 5, 4, 4,
|
||||
3, 3, 2, 2, 1, 1, 0, 0, -1, -1,
|
||||
-2, -2, -3, -3, -4, -4, -5, -5, -4, -4,
|
||||
-3, -3, -2, -2, -1, -1, 0, 0, 0, 0,
|
||||
0, 0, 0, 0, 0, 1, 0, 0, -1, 0, 1, 1,
|
||||
1, 1, 0, 0, -1, -1, -1, -1, 0, 0, -40, -40, -40, others => +40);
|
||||
|
||||
-----------------------------------------------------------------------------
|
||||
-- Signal declarations
|
||||
-----------------------------------------------------------------------------
|
||||
|
||||
signal reset_n : std_logic := '0';
|
||||
signal clk : std_logic := '0';
|
||||
signal init : std_logic;
|
||||
signal pd_in : std_logic;
|
||||
signal abs_position : std_logic_vector(31 downto 0);
|
||||
signal dp_dir : std_logic;
|
||||
signal fire_req : std_logic;
|
||||
signal fire_req_vec : std_logic_vector(31 downto 0);
|
||||
signal filtered_pd : std_logic;
|
||||
signal ch_pd : std_logic;
|
||||
signal ch_mask : std_logic;
|
||||
signal raw_fire_req : std_logic;
|
||||
signal avs_address : std_logic_vector(10 downto 0);
|
||||
signal avs_write : std_logic;
|
||||
signal avs_writedata : std_logic_vector(31 downto 0);
|
||||
signal avs_read : std_logic;
|
||||
signal avs_readdatavalid : std_logic;
|
||||
signal avs_readdata : std_logic_vector(31 downto 0);
|
||||
--
|
||||
signal avs_m : mm_m_rec_t;
|
||||
signal avs_s : mm_s_rec_t;
|
||||
--
|
||||
signal pd_in_cnt : integer;
|
||||
signal pd_out_cnt : integer;
|
||||
--
|
||||
signal end_of_stimuli : boolean;
|
||||
signal test_completed : boolean;
|
||||
signal setup : boolean;
|
||||
signal running : boolean;
|
||||
signal passed : boolean;
|
||||
signal failed : boolean;
|
||||
|
||||
shared variable error_flag : boolean;
|
||||
|
||||
signal wheel_pos : integer;
|
||||
signal pos_error : real;
|
||||
signal pos_error_old : real;
|
||||
signal rotation_idx : natural;
|
||||
signal div_ratio_corr_r : real;
|
||||
signal div_ratio_corr_rr : real;
|
||||
signal div_ratio_r : real;
|
||||
signal wh_pos_err_r : real;
|
||||
signal wheel_corr_on : std_logic;
|
||||
|
||||
signal skip_pd : std_logic;
|
||||
|
||||
|
||||
|
||||
-----------------------------------------------------------------------------
|
||||
-- TB Functions / Procedures
|
||||
-----------------------------------------------------------------------------
|
||||
|
||||
procedure wait_latency(
|
||||
signal clk : in std_logic;
|
||||
cycles : in natural) is
|
||||
begin
|
||||
for i in 1 to cycles loop
|
||||
wait until clk = '1' and clk'event;
|
||||
end loop; -- i
|
||||
end procedure wait_latency;
|
||||
|
||||
procedure read_cfg_file(
|
||||
fname : in string;
|
||||
num_data : in natural;
|
||||
read_data : out cfg_data_t) is
|
||||
|
||||
file f_id : text;
|
||||
variable status : file_open_status;
|
||||
variable InLine : line;
|
||||
variable word : std_logic_vector(31 downto 0);
|
||||
|
||||
begin
|
||||
|
||||
file_open(status, f_id, fname, read_mode);
|
||||
if(status /= open_ok) then
|
||||
log("ERROR: Failed to open file " & fname & ".", VLOW);
|
||||
error_flag := true;
|
||||
else
|
||||
|
||||
READ_LOOP: for idx in 0 to num_data-1 loop
|
||||
|
||||
readline(f_id, InLine);
|
||||
hread(InLine, word);
|
||||
read_data(idx) := word;
|
||||
|
||||
end loop; -- READ_LOOP
|
||||
|
||||
file_close(f_id);
|
||||
|
||||
end if;
|
||||
|
||||
end procedure read_cfg_file;
|
||||
|
||||
-- load ch-ctrl sequencer configuration
|
||||
procedure load_seq_cfg(
|
||||
fname : in string;
|
||||
signal seq_s_rec : in mm_s_rec_t;
|
||||
signal seq_m_rec : out mm_m_rec_t) is
|
||||
|
||||
variable seq_data : seq_cfg_data_t;
|
||||
variable offset : natural;
|
||||
variable addr : std_logic_vector(31 downto 0);
|
||||
|
||||
begin
|
||||
|
||||
read_cfg_file(fname, SEQ_SIZE, seq_data);
|
||||
|
||||
log("Configuring Ch-Ctrl RAM ...", VMEDIUM);
|
||||
offset :=512;
|
||||
for n in 0 to SEQ_SIZE-1 loop
|
||||
addr := std_logic_vector(to_unsigned(offset+n,32));
|
||||
--log("Ch-Ctrl Cfg: Addr = " & to_string(n) & ", data = 0x" & to_hstring(seq_data(n)) & ".", VMEDIUM);
|
||||
mm_32b_write(addr, seq_data(n), seq_s_rec, seq_m_rec);
|
||||
end loop; -- n
|
||||
|
||||
end procedure load_seq_cfg;
|
||||
|
||||
procedure set_div_ratio(
|
||||
div_ratio : real;
|
||||
signal mm_s_rec : in mm_s_rec_t;
|
||||
signal mm_m_rec : out mm_m_rec_t) is
|
||||
|
||||
variable addr : std_logic_vector(31 downto 0) := (others => '0');
|
||||
variable data : std_logic_vector(31 downto 0) := (others => '0');
|
||||
|
||||
variable ratio_int : integer;
|
||||
variable ratio_slv : std_logic_vector(33 downto 0);
|
||||
|
||||
begin
|
||||
|
||||
-- set the division ratio
|
||||
ratio_int := integer(div_ratio*real(2**24));
|
||||
ratio_slv := std_logic_vector(to_unsigned(ratio_int, 34));
|
||||
-- Set the integer part of the div-ratio
|
||||
data(31 downto 10) := (others => '0');
|
||||
data( 9 downto 0) := ratio_slv(33 downto 24);
|
||||
addr := std_logic_vector(resize(unsigned(DIV_RATIO_INT), 32));
|
||||
mm_32b_write(addr, data, mm_s_rec, mm_m_rec);
|
||||
-- Set the fractional part of the div-ratio
|
||||
data(31 downto 24) := (others => '0');
|
||||
data(23 downto 0) := ratio_slv(23 downto 0);
|
||||
addr := std_logic_vector(resize(unsigned(DIV_RATIO_FRAC), 32));
|
||||
mm_32b_write(addr, data, mm_s_rec, mm_m_rec);
|
||||
|
||||
end procedure set_div_ratio;
|
||||
|
||||
procedure enable_wheel_corr(
|
||||
enable : std_logic;
|
||||
signal mm_s_rec : in mm_s_rec_t;
|
||||
signal mm_m_rec : out mm_m_rec_t) is
|
||||
|
||||
variable addr : std_logic_vector(31 downto 0) := (others => '0');
|
||||
variable data : std_logic_vector(31 downto 0) := (others => '0');
|
||||
|
||||
begin
|
||||
|
||||
-- Read the current value of the cotrl register
|
||||
addr := std_logic_vector(resize(unsigned(PULSE_GEN_CTRL_REG), 32));
|
||||
mm_32b_read(addr, data, mm_s_rec, mm_m_rec);
|
||||
data(11) := enable;
|
||||
-- Write back the updated value
|
||||
mm_32b_write(addr, data, mm_s_rec, mm_m_rec);
|
||||
|
||||
if(enable = '0') then
|
||||
log("Wheel Correction Disabled:", VMEDIUM);
|
||||
else
|
||||
log("Wheel Correction Enabled:", VMEDIUM);
|
||||
end if;
|
||||
|
||||
end procedure enable_wheel_corr;
|
||||
|
||||
procedure apply_pg_cfg(
|
||||
div_ratio : real;
|
||||
offset_dir0 : integer;
|
||||
offset_dir1 : integer;
|
||||
delay : integer;
|
||||
signal mm_s_rec : in mm_s_rec_t;
|
||||
signal mm_m_rec : out mm_m_rec_t) is
|
||||
|
||||
variable addr : std_logic_vector(31 downto 0) := (others => '0');
|
||||
variable data : std_logic_vector(31 downto 0) := (others => '0');
|
||||
|
||||
variable ratio_int : integer;
|
||||
variable ratio_slv : std_logic_vector(33 downto 0);
|
||||
|
||||
begin
|
||||
|
||||
log_separator_line(VMEDIUM);
|
||||
log("Configuring Pulse-Generator registers ...", VMEDIUM);
|
||||
log_separator_line(VMEDIUM);
|
||||
|
||||
log("Div-Ratio = " & to_string(div_ratio), VMEDIUM);
|
||||
|
||||
-- Disable/Re-enable first the whole pulse_generator
|
||||
addr := std_logic_vector(resize(unsigned(PULSE_GEN_CTRL_REG), 32));
|
||||
data := (others => '0');
|
||||
mm_32b_write(addr, data, mm_s_rec, mm_m_rec);
|
||||
data := (0 => '1', 16 => '1', others => '0');
|
||||
mm_32b_write(addr, data, mm_s_rec, mm_m_rec);
|
||||
|
||||
-- Disable the Channel Controller sequencer
|
||||
addr := std_logic_vector(resize(unsigned(CH_CTRL_CTRL_REG), 32));
|
||||
data := (others => '0');
|
||||
mm_32b_write(addr, data, mm_s_rec, mm_m_rec);
|
||||
|
||||
-- Set the division ratio
|
||||
set_div_ratio(div_ratio, mm_s_rec, mm_m_rec);
|
||||
|
||||
-- Disable/Enable the fractional divider
|
||||
addr := std_logic_vector(resize(unsigned(FRAC_DIV_CTRL_REG), 32));
|
||||
data := (others => '0');
|
||||
mm_32b_write(addr, data, mm_s_rec, mm_m_rec);
|
||||
data := (0 => '1', others => '0');
|
||||
mm_32b_write(addr, data, mm_s_rec, mm_m_rec);
|
||||
|
||||
-- Configure the rest of the pulse_generator:
|
||||
-- Configure the Channel Offset (Both DIR_0 and DIR_1):
|
||||
-- DIR_0
|
||||
addr := std_logic_vector(resize(unsigned(CH_OFFSET_D0_REG),32));
|
||||
data := std_logic_vector(to_unsigned(offset_dir0, 32));
|
||||
mm_32b_write(addr, data, mm_s_rec, mm_m_rec);
|
||||
-- DIR_1
|
||||
addr := std_logic_vector(resize(unsigned(CH_OFFSET_D1_REG), 32));
|
||||
data := std_logic_vector(to_unsigned(offset_dir1, 32));
|
||||
mm_32b_write(addr, data, mm_s_rec, mm_m_rec);
|
||||
-- Configure the Channel Delay:
|
||||
addr := std_logic_vector(resize(unsigned(CH_DELAY_REG), 32));
|
||||
data := std_logic_vector(to_unsigned(delay, 32));
|
||||
mm_32b_write(addr, data, mm_s_rec, mm_m_rec);
|
||||
|
||||
-- enable the ch-ctrl sequencer
|
||||
addr := std_logic_vector(to_unsigned(32+3, 32));
|
||||
data := (0 => '1', others => '0');
|
||||
mm_32b_write(addr, data, mm_s_rec, mm_m_rec);
|
||||
-- issue a start_req to the ch-ctrl sequencer
|
||||
addr := std_logic_vector(resize(unsigned(CH_CTRL_CTRL_REG), 32));
|
||||
data := (0 => '1', others => '0');
|
||||
mm_32b_write(addr, data, mm_s_rec, mm_m_rec);
|
||||
|
||||
-- Specify the image-length for wheel correction
|
||||
addr := std_logic_vector(resize(unsigned(WH_PIXEL_NUM), 32));
|
||||
data := std_logic_vector(to_unsigned(IMG_LEN, 32));
|
||||
mm_32b_write(addr, data, mm_s_rec, mm_m_rec);
|
||||
|
||||
-- Compute the constant for W&H Correction
|
||||
addr := std_logic_vector(resize(unsigned(WH_POS_ERR_2_CORR_REG), 32));
|
||||
data := std_logic_vector(to_unsigned(integer(round((1.0/real(IMG_LEN))*(2.0**32))), 32));
|
||||
mm_32b_write(addr, data, mm_s_rec, mm_m_rec);
|
||||
|
||||
-- set the threshold for skipping correctiion to 256
|
||||
addr := std_logic_vector(resize(unsigned(WH_SKIP_CORR_THRES_REG), 32));
|
||||
data := std_logic_vector(to_unsigned((256), 32));
|
||||
mm_32b_write(addr, data, mm_s_rec, mm_m_rec);
|
||||
|
||||
|
||||
-- enable the pulse-generator + Enable W&H Correction
|
||||
addr := std_logic_vector(resize(unsigned(PULSE_GEN_CTRL_REG), 32));
|
||||
data := (0 => '1', 11 => '1', 16 => '1', others => '0');
|
||||
mm_32b_write(addr, data, mm_s_rec, mm_m_rec);
|
||||
|
||||
log("Wheel Correction Enabled:", VMEDIUM);
|
||||
|
||||
log_separator_line(VMEDIUM);
|
||||
|
||||
end procedure apply_pg_cfg;
|
||||
|
||||
-----------------------------------------------------------------------------
|
||||
-- End declarative part
|
||||
-----------------------------------------------------------------------------
|
||||
|
||||
begin -- architecture behav
|
||||
|
||||
clk <= not clk after 0.5*CLK_PERIOD;
|
||||
|
||||
-----------------------------------------------------------------------------
|
||||
-- UUT
|
||||
-----------------------------------------------------------------------------
|
||||
|
||||
iUUT: entity work.pulse_generator_3
|
||||
generic map (
|
||||
PULSE_DELAY_EQUAL_EN => true,
|
||||
PIXEL_PITCH_CORR_EN => true)
|
||||
port map (
|
||||
clk => clk,
|
||||
reset_n => reset_n,
|
||||
init => init,
|
||||
pd_in => pd_in,
|
||||
abs_position => abs_position,
|
||||
dp_dir => dp_dir,
|
||||
fire_req_vec => fire_req_vec,
|
||||
filtered_pd => filtered_pd,
|
||||
ch_pd => ch_pd,
|
||||
ch_mask => ch_mask,
|
||||
raw_fire_req => raw_fire_req,
|
||||
avs_address => avs_address,
|
||||
avs_write => avs_write,
|
||||
avs_writedata => avs_writedata,
|
||||
avs_read => avs_read,
|
||||
avs_readdatavalid => avs_readdatavalid,
|
||||
avs_readdata => avs_readdata);
|
||||
|
||||
fire_req <= fire_req_vec(0);
|
||||
|
||||
|
||||
pGET_WH_ERR : process
|
||||
alias wh_pos_err is <<signal iUUT.wh_pos_err_curr : std_logic_vector(31 downto 0)>>;
|
||||
|
||||
alias wh_corr_meas_ready is <<signal iUUT.wh_corr_ready_v : std_logic_vector(5 downto 0)>>;
|
||||
|
||||
alias div_ratio_corr is <<signal iUUT.div_ratio_corr : std_logic_vector(33 downto 0)>>;
|
||||
|
||||
|
||||
variable pos_error : real;
|
||||
variable div_ratio_corr_r : real;
|
||||
begin
|
||||
|
||||
if(SKIP_PD_EN = false) then
|
||||
wh_pos_err_r <= real(to_integer(signed(wh_pos_err)))/256.0;
|
||||
wait until clk = '1' and clk'event;
|
||||
else
|
||||
|
||||
wh_pos_err_r <= 0.0;
|
||||
div_ratio_corr_rr <= 0.0;
|
||||
|
||||
-- wait until the first PD;
|
||||
wait until rising_edge(ch_pd);
|
||||
|
||||
-- measur the error, then apply correction
|
||||
while end_of_stimuli = false loop
|
||||
|
||||
wait until rising_edge(wh_corr_meas_ready(2));
|
||||
wait until clk = '0' and clk'event;
|
||||
pos_error := real(to_integer(signed(wh_pos_err)))/256.0;
|
||||
wh_pos_err_r <= pos_error;
|
||||
log("Rotation #" & to_string(rotation_idx) & ": pos_error = " & to_string(pos_error) & ".", VMEDIUM);
|
||||
wait_latency(clk, 10);
|
||||
div_ratio_corr_r := real(to_integer(signed(div_ratio_corr)))/(2.0**24);
|
||||
div_ratio_corr_rr <= div_ratio_corr_r;
|
||||
|
||||
log("Division Ratio Correction =" & to_string(div_ratio_corr_r) & ".", VMEDIUM);
|
||||
|
||||
end loop;
|
||||
|
||||
wait until running = false;
|
||||
if(abs(pos_error) > DIV_RATIO) then
|
||||
error_flag := true;
|
||||
log("ERROR: simulation ended with a misalignment error bigger than 1 pixel.", VLOW);
|
||||
end if;
|
||||
|
||||
end if;
|
||||
end process pGET_WH_ERR;
|
||||
|
||||
-----------------------------------------------------------------------------
|
||||
-- Avalon interface
|
||||
-----------------------------------------------------------------------------
|
||||
|
||||
clk_clk <= clk;
|
||||
reset_reset_n <= reset_n;
|
||||
|
||||
avs_s.mm_readdata <= avs_readdata;
|
||||
|
||||
avs_s.mm_readdatavalid <= avs_readdatavalid;
|
||||
|
||||
avs_s.mm_waitrequest <= '0';
|
||||
avs_s.use_readvalid <= true;
|
||||
|
||||
avs_address <= avs_m.mm_address(avs_address'range);
|
||||
avs_write <= avs_m.mm_write;
|
||||
avs_writedata <= avs_m.mm_writedata;
|
||||
avs_read <= avs_m.mm_read;
|
||||
|
||||
pCNT_CH_PD : process(reset_n, clk)
|
||||
begin
|
||||
if(reset_n = '0') then
|
||||
pd_out_cnt <= 0;
|
||||
elsif(clk = '1' and clk'event) then
|
||||
if(ch_pd = '1') then
|
||||
pd_out_cnt <= pd_out_cnt + 1;
|
||||
end if;
|
||||
end if;
|
||||
end process pCNT_CH_PD;
|
||||
|
||||
-----------------------------------------------------------------------------
|
||||
-- Testbench Logic
|
||||
-----------------------------------------------------------------------------
|
||||
|
||||
pSTIMULI : process
|
||||
|
||||
begin
|
||||
|
||||
end_of_stimuli <= false;
|
||||
|
||||
pd_in <= '0';
|
||||
pd_in_cnt <= 0;
|
||||
--
|
||||
abs_position <= INIT_ABS_POS;
|
||||
wheel_pos <= 0;
|
||||
|
||||
-- wait until init is deasserted
|
||||
wait until falling_edge(init);
|
||||
|
||||
wait for 1 us;
|
||||
|
||||
-- send the initial PD event
|
||||
|
||||
wait until clk = '1' and clk'event;
|
||||
log("Issueing Initial PD ...", VLOW);
|
||||
pd_in <= '1';
|
||||
pd_in_cnt <= pd_in_cnt + 1;
|
||||
wait until clk = '1' and clk'event;
|
||||
pd_in <= '0';
|
||||
|
||||
while pd_in_cnt < TOTAL_ROTATIONS loop
|
||||
|
||||
wait_latency(clk, 50);
|
||||
abs_position <= std_logic_vector(signed(abs_position)+ 1);
|
||||
|
||||
if((wheel_pos + 1) = integer(WHEEL_CIRCUM+real(wheel_error(pd_in_cnt))+0.5)) then
|
||||
-- it's time to issue a new PD
|
||||
if(skip_pd = '0') then
|
||||
pd_in <= '1';
|
||||
else
|
||||
log("Skipped PD (PD count = " & to_string(pd_in_cnt) & ").", VLOW);
|
||||
end if;
|
||||
pd_in_cnt <= pd_in_cnt + 1;
|
||||
wheel_pos <= 0;
|
||||
wait until clk = '1' and clk'event;
|
||||
pd_in <= '0';
|
||||
else
|
||||
wheel_pos <= wheel_pos + 1;
|
||||
end if;
|
||||
|
||||
end loop;
|
||||
|
||||
-- completed
|
||||
end_of_stimuli <= true;
|
||||
|
||||
wait;
|
||||
|
||||
end process pSTIMULI;
|
||||
|
||||
pSKIP_PD : process
|
||||
begin
|
||||
if(pd_in_cnt = 47 or pd_in_cnt = 6 or pd_in_cnt = 49 or
|
||||
pd_in_cnt = 43 or pd_in_cnt = 48 or pd_in_cnt = 55 or
|
||||
pd_in_cnt = 62 or pd_in_cnt = 71 or pd_in_cnt = 72) then
|
||||
if(SKIP_PD_EN = true) then
|
||||
skip_pd <= '1';
|
||||
end if;
|
||||
else
|
||||
skip_pd <= '0';
|
||||
end if;
|
||||
wait until clk = '1' and clk'event;
|
||||
end process pSKIP_PD;
|
||||
|
||||
-----------------------------------------------------------------------------
|
||||
-- Measure Error, Apply external correction
|
||||
-----------------------------------------------------------------------------
|
||||
|
||||
pMEAS_CORR : process
|
||||
variable measure_started : boolean;
|
||||
variable pos_error_avail : boolean;
|
||||
variable start_pos : integer;
|
||||
|
||||
alias div_ratio_corr is <<signal iUUT.div_ratio_corr : std_logic_vector(33 downto 0)>>;
|
||||
alias div_ratio_i is <<signal iUUT.div_ratio_i : std_logic_vector(33 downto 0)>>;
|
||||
|
||||
|
||||
procedure apply_correction(pos_error: in real) is
|
||||
variable div_ratio_new : real;
|
||||
variable div_ratio_man : real;
|
||||
variable div_ratio_vec : std_logic_vector(33 downto 0);
|
||||
variable tot_error : real;
|
||||
variable delta_error : real;
|
||||
begin
|
||||
-- compute the total and the delta loop error
|
||||
tot_error := pos_error;
|
||||
delta_error := pos_error-pos_error_old;
|
||||
-- Compute the correction through a 2nd order loop filter
|
||||
div_ratio_new := div_ratio_r + (delta_error*LOOP_FILT_DELTA+tot_error*LOOP_FILT_TOT)*(1.0/real(IMG_LEN));
|
||||
div_ratio_r <= div_ratio_new;
|
||||
div_ratio_corr_r <= div_ratio_new - DIV_RATIO;
|
||||
|
||||
div_ratio_vec(33 downto 24) := std_logic_vector(to_unsigned(integer(floor(div_ratio_new)),10));
|
||||
div_ratio_man := (div_ratio_new - floor(div_ratio_new))*(2.0**24);
|
||||
div_ratio_vec(23 downto 0) := std_logic_vector(to_unsigned(integer(floor(div_ratio_man)),24));
|
||||
-- force the correction into the UUT:
|
||||
if(APPLY_EMUL_CORR = true) then
|
||||
div_ratio_i <= force div_ratio_vec;
|
||||
end if;
|
||||
-- save the correction value
|
||||
log("Division Ratio Correction =" & to_string(div_ratio_new-DIV_RATIO) & ".", VMEDIUM);
|
||||
|
||||
end procedure apply_correction;
|
||||
|
||||
-- The correction is computed emulating fixed-point numbers
|
||||
-- (pos_err-to-correction is represented with a 32 bits mantissa)
|
||||
procedure apply_correction_int(pos_error: in real) is
|
||||
variable div_ratio_new : real;
|
||||
variable div_ratio_man : real;
|
||||
variable div_ratio_vec : std_logic_vector(33 downto 0);
|
||||
variable pos_err_to_corr : integer := integer(round((1.0/real(IMG_LEN))*(2.0**32)));
|
||||
variable tot_error : real;
|
||||
variable delta_error : real;
|
||||
|
||||
begin
|
||||
-- compute the total and the delta loop error
|
||||
tot_error := pos_error;
|
||||
delta_error := pos_error-pos_error_old;
|
||||
if(APPLY_EMUL_CORR = true) then
|
||||
-- Compute the correction through a 2nd order loop filter
|
||||
div_ratio_new := div_ratio_r + (delta_error*LOOP_FILT_DELTA+tot_error*LOOP_FILT_TOT)*real(pos_err_to_corr)/(2.0**32);
|
||||
div_ratio_corr_r <= div_ratio_new - DIV_RATIO;
|
||||
div_ratio_r <= div_ratio_new;
|
||||
div_ratio_vec(33 downto 24) := std_logic_vector(to_unsigned(integer(floor(div_ratio_new)),10));
|
||||
div_ratio_man := (div_ratio_new - floor(div_ratio_new))*(2.0**24);
|
||||
div_ratio_vec(23 downto 0) := std_logic_vector(to_unsigned(integer(floor(div_ratio_man)),24));
|
||||
else
|
||||
div_ratio_new := real(to_integer(unsigned(div_ratio_i(33 downto 24)))) + real(to_integer(unsigned(div_ratio_i(23 downto 0))))/(2.0**24);
|
||||
div_ratio_corr_r <= div_ratio_new - DIV_RATIO;
|
||||
div_ratio_r <= div_ratio_new;
|
||||
end if;
|
||||
|
||||
--log("tot_error = " & to_string(tot_error) & ", delta_error = " & to_string(delta_error), VMEDIUM);
|
||||
--log("tot_error-norm = " & to_string(256.0*tot_error) & ", delta_error-norm = " & to_string(256.0*delta_error), VMEDIUM);
|
||||
|
||||
-- force the correction into the UUT:
|
||||
if(APPLY_EMUL_CORR = true) then
|
||||
div_ratio_i <= force div_ratio_vec;
|
||||
end if;
|
||||
-- save the correction value
|
||||
log("Division Ratio Correction =" & to_string(div_ratio_new-DIV_RATIO) & ".", VMEDIUM);
|
||||
|
||||
end procedure apply_correction_int;
|
||||
|
||||
begin
|
||||
|
||||
pos_error <= 0.0;
|
||||
pos_error_old <= 0.0;
|
||||
rotation_idx <= 0;
|
||||
|
||||
div_ratio_corr_r <= 0.0;
|
||||
div_ratio_r <= DIV_RATIO;
|
||||
|
||||
measure_started := false;
|
||||
pos_error_avail := false;
|
||||
|
||||
-- wait until the first PD;
|
||||
wait until rising_edge(ch_pd);
|
||||
|
||||
-- measur the error, then apply correction
|
||||
while end_of_stimuli = false loop
|
||||
|
||||
if SKIP_PD_EN = false then
|
||||
|
||||
wait until rising_edge(ch_pd) or falling_edge(ch_mask);
|
||||
if(rising_edge(ch_pd) and falling_edge(ch_mask)) then
|
||||
pos_error_old <= pos_error;
|
||||
pos_error <= -DIV_RATIO;
|
||||
pos_error_avail := true;
|
||||
rotation_idx <= rotation_idx + 1;
|
||||
elsif(rising_edge(ch_pd)) then
|
||||
if(measure_started = false) then
|
||||
start_pos := to_integer(signed(abs_position));
|
||||
measure_started := true;
|
||||
else
|
||||
pos_error_old <= pos_error;
|
||||
pos_error <= real(to_integer(signed(abs_position)) - start_pos) - DIV_RATIO;
|
||||
rotation_idx <= rotation_idx + 1;
|
||||
measure_started := false;
|
||||
pos_error_avail := true;
|
||||
end if;
|
||||
elsif(falling_edge(ch_mask)) then
|
||||
if(measure_started = false) then
|
||||
start_pos := to_integer(signed(abs_position));
|
||||
measure_started := true;
|
||||
else
|
||||
pos_error_old <= pos_error;
|
||||
pos_error <= -(real(to_integer(signed(abs_position)) - start_pos)) - DIV_RATIO;
|
||||
rotation_idx <= rotation_idx + 1;
|
||||
measure_started := false;
|
||||
pos_error_avail := true;
|
||||
end if;
|
||||
end if;
|
||||
|
||||
if(pos_error_avail = true) then
|
||||
-- Do not remove this wait statement: it makes sures previous signal
|
||||
-- assignment are executed before computing the corrections
|
||||
wait until clk = '0' and clk'event;
|
||||
log("Rotation #" & to_string(rotation_idx) & ": pos_error = " & to_string(pos_error) & ".", VMEDIUM);
|
||||
if(APPLY_CORR_EN = true) then
|
||||
--apply_correction(pos_error);
|
||||
apply_correction_int(pos_error);
|
||||
end if;
|
||||
pos_error_avail := false;
|
||||
end if;
|
||||
|
||||
else
|
||||
|
||||
-- When PD are skipped, do not try to measure the position error in the
|
||||
-- testbench
|
||||
wait until rising_edge(ch_pd);
|
||||
rotation_idx <= rotation_idx + 1;
|
||||
wait_latency(clk, 20);
|
||||
|
||||
end if;
|
||||
|
||||
end loop;
|
||||
|
||||
end process pMEAS_CORR;
|
||||
|
||||
-----------------------------------------------------------------------------
|
||||
-- Testbench Main
|
||||
-----------------------------------------------------------------------------
|
||||
|
||||
pTB_CTRL : process
|
||||
|
||||
variable addr : std_logic_vector(31 downto 0) := (others => '0');
|
||||
variable data : std_logic_vector(31 downto 0) := (others => '0');
|
||||
|
||||
begin
|
||||
|
||||
-- Set the verbosity level for logging
|
||||
set_log_verbosity(VERBOSITY_LEVEL);
|
||||
--set_log_verbosity(VHIGH);
|
||||
|
||||
-- initilialize the Avalon master-bus
|
||||
mm_m_init(avs_m);
|
||||
|
||||
log_header("Ch-Ctrl Config verification:", VLOW);
|
||||
|
||||
setup <= false;
|
||||
running <= false;
|
||||
passed <= false;
|
||||
error_flag := false;
|
||||
|
||||
init <= '0';
|
||||
wheel_corr_on <= '0';
|
||||
|
||||
-- Reset
|
||||
reset_n <= '0';
|
||||
wait for 100 ns;
|
||||
wait until clk = '1' and clk'event;
|
||||
reset_n <= '1';
|
||||
|
||||
---------------------------------------------------------------------------
|
||||
-- Pulse-Generator Configuration
|
||||
---------------------------------------------------------------------------
|
||||
|
||||
wait for 200 ns;
|
||||
-- Configure Ch-Ctrl RAM
|
||||
load_seq_cfg(seq_config_file, avs_s, avs_m);
|
||||
|
||||
apply_pg_cfg(
|
||||
div_ratio => DIV_RATIO,
|
||||
offset_dir0 => PD_OFFSET,
|
||||
offset_dir1 => 0,
|
||||
delay => 0,
|
||||
mm_s_rec => avs_s, mm_m_rec => avs_m);
|
||||
|
||||
wheel_corr_on <= '1';
|
||||
|
||||
|
||||
---------------------------------------------------------------------------
|
||||
-- Movement Simulation
|
||||
---------------------------------------------------------------------------
|
||||
|
||||
log("Forward Movement:", VLOW);
|
||||
log_separator_line(VLOW);
|
||||
|
||||
wait for 200 ns;
|
||||
wait until clk = '1' and clk'event;
|
||||
init <= '1';
|
||||
wait until clk = '1' and clk'event;
|
||||
wait until clk = '1' and clk'event;
|
||||
wait until clk = '1' and clk'event;
|
||||
init <= '0';
|
||||
wait for 200 ns;
|
||||
|
||||
running <= true;
|
||||
wait until clk = '1' and clk'event;
|
||||
|
||||
-- Disable Wheel Correction after a while
|
||||
if(SIM_ROTATIONS >= 50) then
|
||||
-- disable wheel corrections
|
||||
wait until rotation_idx = 30;
|
||||
wait for 200 ns;
|
||||
enable_wheel_corr(enable => '0', mm_s_rec => avs_s, mm_m_rec => avs_m);
|
||||
wheel_corr_on <= '0';
|
||||
-- re-enable wheel corrections
|
||||
wait until rotation_idx = 40;
|
||||
wait for 200 ns;
|
||||
enable_wheel_corr(enable => '1', mm_s_rec => avs_s, mm_m_rec => avs_m);
|
||||
wheel_corr_on <= '1';
|
||||
end if;
|
||||
|
||||
|
||||
wait until (end_of_stimuli = true) or (pd_in_cnt = SIM_ROTATIONS + 1);
|
||||
|
||||
running <= false;
|
||||
passed <= true after 100 ns;
|
||||
wait;
|
||||
|
||||
end process pTB_CTRL;
|
||||
|
||||
failed <= error_flag after 100 ns;
|
||||
|
||||
pREPORT_RESULT : process
|
||||
begin
|
||||
wait until failed = true or passed = true;
|
||||
wait for 1 us;
|
||||
log_separator_line(VLOW);
|
||||
if(failed = true) then
|
||||
log("FAILURE: test completed with errors.", VLOW);
|
||||
elsif(passed = true) then
|
||||
log("SUCCESS: test successfully completed.", VLOW);
|
||||
end if;
|
||||
log_separator_line(VLOW);
|
||||
test_completed <= true;
|
||||
end process pREPORT_RESULT;
|
||||
|
||||
|
||||
end architecture behav;
|
||||
|
|
@ -0,0 +1,266 @@
|
|||
##/////////////////////////////////////////////////////////////////////////////
|
||||
## Title : wheel_correction_analysis
|
||||
##/////////////////////////////////////////////////////////////////////////////
|
||||
## File : wheel_correction_analysis.py
|
||||
## Author : Gianmarco Girau
|
||||
## Company : GIS
|
||||
## Target : HMB Console
|
||||
## Dependency : none
|
||||
##/////////////////////////////////////////////////////////////////////////////
|
||||
## Description: Analyze misalignment error from wheel corrections
|
||||
##/////////////////////////////////////////////////////////////////////////////
|
||||
## Last update: 2019-05-30
|
||||
##/////////////////////////////////////////////////////////////////////////////
|
||||
## Revisions :
|
||||
## Date Version Author Description
|
||||
## 2019-05-30 01.00.0a gmg Created
|
||||
##/////////////////////////////////////////////////////////////////////////////
|
||||
|
||||
|
||||
from bokeh.plotting import figure, output_file, show
|
||||
from bokeh.layouts import gridplot
|
||||
|
||||
from functools import reduce
|
||||
|
||||
# log_from_console = 1 => analyze logs from SMB/HMB Console
|
||||
# log_from_console = 0 => analyze logs from SMB DebugView++
|
||||
log_from_console = 0
|
||||
enc_res = 1.41667*1.0e-6
|
||||
|
||||
pd_num = []
|
||||
pd_time = []
|
||||
pd_pos = []
|
||||
|
||||
##/////////////////////////////////////////////////////////////////////////////
|
||||
## Get data from the log file
|
||||
##/////////////////////////////////////////////////////////////////////////////
|
||||
|
||||
def get_pd_data(data_filename):
|
||||
global log_from_console
|
||||
|
||||
pd_num = []
|
||||
pd_time = []
|
||||
pd_pos = []
|
||||
|
||||
f_log = open((data_filename), 'r')
|
||||
|
||||
if log_from_console == 1:
|
||||
for line in f_log:
|
||||
target = '<Detected-PD>'
|
||||
idx = line.find(target)
|
||||
if idx != -1:
|
||||
tmp = line[idx + len(target):].split('#')
|
||||
clist = tmp[1].split(',')
|
||||
pd_num.append(int(clist[0]))
|
||||
# print('PD Event = {:d}'.format(pd_num[-1]))
|
||||
target = 'Time = '
|
||||
idx = line.find(target)
|
||||
clist = line[idx + len(target):].split(None)
|
||||
pd_time.append(float(clist[0][0:-1]))
|
||||
target = 'abs_pos = '
|
||||
idx = line.find(target)
|
||||
clist = line[idx + len(target):].split(None)
|
||||
pd_pos.append(float(clist[0][0:-1]))
|
||||
else:
|
||||
for line in f_log:
|
||||
target = 'addToHistory Added Product Detect FIFO entry: entryId: '
|
||||
idx = line.find(target)
|
||||
if idx != -1:
|
||||
clist = line[idx + len(target):].split(None)
|
||||
pd_num.append(int(clist[0]))
|
||||
# print('PD Event = {:d}'.format(pd_num[-1]))
|
||||
target = 'coarseTime: '
|
||||
idx = line.find(target)
|
||||
clist = line[idx + len(target):].split(None)
|
||||
coarse_time = float(clist[0])
|
||||
target = 'fineTime: '
|
||||
idx = line.find(target)
|
||||
clist = line[idx + len(target):].split(None)
|
||||
fine_time = float(clist[0])
|
||||
pd_time.append(float(coarse_time)+float(fine_time)*1.0e-8)
|
||||
target = ' position: '
|
||||
idx = line.find(target)
|
||||
clist = line[idx + len(target):].split(None)
|
||||
pd_pos.append(float(clist[0]))
|
||||
|
||||
f_log.closed
|
||||
|
||||
return [pd_num, pd_time, pd_pos]
|
||||
|
||||
def save_raw_data(pd_num, pd_time, pd_pos, outfile):
|
||||
|
||||
f_data = open(outfile, 'w')
|
||||
f_data.write("PD event, Time, Position" + '\n')
|
||||
for idx in range(0, len(pd_num)):
|
||||
f_data.write("{0:d}, {1:f}, {2:f}".format(pd_num[idx], pd_time[idx], pd_pos[idx]) + '\n')
|
||||
|
||||
f_data.close
|
||||
|
||||
def avg(lst):
|
||||
return reduce(lambda a, b: a + b, lst) / len(lst)
|
||||
|
||||
def plot_pd_dat(pd_num, pd_time, pd_pos, outfile, flexo_label=''):
|
||||
|
||||
# output to static HTML file
|
||||
output_file((outfile) + '.html')
|
||||
|
||||
plot_w = 500
|
||||
plot_h = 500
|
||||
|
||||
toolset = "pan,box_zoom,reset,save"
|
||||
|
||||
delta_pd = []
|
||||
N = len(pd_num)
|
||||
for idx in range(1, N):
|
||||
delta_pd.append(pd_pos[idx] - pd_pos[idx - 1])
|
||||
|
||||
pd_avg = avg(delta_pd)
|
||||
|
||||
print("PD average distance = {:f} [encoder pulses]".format(pd_avg))
|
||||
|
||||
pd_var = []
|
||||
|
||||
pd_var.append(0.0)
|
||||
|
||||
for idx in range(1, N):
|
||||
pd_var.append(delta_pd[idx-1]-pd_avg)
|
||||
|
||||
data_range = max(delta_pd)-min(delta_pd)
|
||||
if data_range == 0.0:
|
||||
data_range = 1.0
|
||||
plot_range = [min(delta_pd)-data_range, max(delta_pd)+data_range]
|
||||
|
||||
# PD variation on a cycle-by-cycle basis
|
||||
pd_cbc = []
|
||||
pd_cbc.append(0.0)
|
||||
for idx in range(1, N):
|
||||
pd_cbc.append(pd_var[idx]-pd_var[idx-1])
|
||||
|
||||
print("Maximum variation on a cycle basis = {0}".format(max(pd_cbc)))
|
||||
print("Minimum variation on a cycle basis = {0}".format(min(pd_cbc)))
|
||||
|
||||
# Compute the average linear encoder speed over a Flexo wheel rotation
|
||||
enc_speed = []
|
||||
enc_speed.append(0.0)
|
||||
enc_speed.append(0.0)
|
||||
|
||||
for idx in range(1, N):
|
||||
enc_speed.append(enc_res*delta_pd[idx-1]/(pd_time[idx]-pd_time[idx-1]))
|
||||
|
||||
# create a new plot
|
||||
this_legend = 'Min = {0:f}'.format(min(delta_pd)) + '\n' + 'Max = {0:f}'.format(max(delta_pd))
|
||||
s1 = figure(width=plot_w, plot_height=plot_h, title='PD distance [encoder pulses]', x_axis_label='PD Event',
|
||||
y_axis_label='PD distance [encoder pulses]', tools=toolset,y_range=plot_range)
|
||||
s1.circle(pd_num[1:], delta_pd, size=5, color="navy", alpha=0.5, legend=this_legend)
|
||||
|
||||
data_range = max(pd_var)-min(pd_var)
|
||||
if data_range == 0.0:
|
||||
data_range = 1.0
|
||||
plot_range = [min(pd_var)-data_range, max(pd_var)+data_range]
|
||||
|
||||
this_legend = 'Min = {0:f}'.format(min(pd_var[1:N])) + '\n' + 'Max = {0:f}'.format(max(pd_var[1:N]))
|
||||
s2 = figure(width=plot_w, height=plot_h, x_range=s1.x_range, y_range=plot_range, title='PD variation from average',
|
||||
x_axis_label='PD Event', y_axis_label='PD Variation from average[Encoder Steps]',
|
||||
tools=toolset)
|
||||
s2.triangle(pd_num[1:], pd_var[1:N], size=10, color="olive", alpha=0.5, legend=this_legend)
|
||||
|
||||
data_range = max(pd_cbc)-min(pd_cbc)
|
||||
if data_range == 0.0:
|
||||
data_range = 1.0
|
||||
plot_range = [min(pd_cbc)-data_range, max(pd_cbc)+data_range]
|
||||
|
||||
this_legend = 'Min = {0:f}'.format(min(pd_cbc[1:N])) + '\n' + 'Max = {0:f}'.format(max(pd_cbc[1:N]))
|
||||
s3 = figure(width=plot_w, height=plot_h, x_range=s1.x_range, y_range=plot_range,
|
||||
title='PD distance variation from the previous rotation',
|
||||
x_axis_label='PD Event', y_axis_label='PD Variation [Encoder Steps]',
|
||||
tools=toolset)
|
||||
s3.circle(pd_num[1:], pd_cbc[1:N], size=10, color="firebrick", alpha=0.5,legend=this_legend)
|
||||
|
||||
data_range = max(enc_speed) - min(enc_speed)
|
||||
if data_range == 0.0:
|
||||
data_range = 1.0
|
||||
plot_range = [min(enc_speed) - data_range, max(enc_speed) + data_range]
|
||||
|
||||
s4 = figure(width=plot_w, height=plot_h, x_range=s1.x_range, y_range=plot_range, title='Average linear encoder speed over a Flexo wheel rotation',
|
||||
x_axis_label='PD Event', y_axis_label='Encoder Velocity',
|
||||
tools=toolset)
|
||||
|
||||
s4.triangle(pd_num[1:], enc_speed[2:N+1], size=10, color="navy", alpha=0.5)
|
||||
|
||||
p = gridplot([[s1], [s2], [s3], [s4]])
|
||||
#p = gridplot([[s1]])
|
||||
|
||||
# show the results
|
||||
show(p)
|
||||
|
||||
|
||||
##/////////////////////////////////////////////////////////////////////////////
|
||||
## Plot-data
|
||||
##/////////////////////////////////////////////////////////////////////////////
|
||||
|
||||
|
||||
#1
|
||||
#data_set = 'data-set'
|
||||
data_set = './MiRAFLEX-tests-2019-09-13/2019-09-13_10mmin_direct_no_pd_maschine'
|
||||
data_file = "{0}.txt".format(data_set)
|
||||
csv_file = "{0}.csv".format(data_set)
|
||||
[pd_num, pd_time, pd_pos] = get_pd_data(data_file)
|
||||
save_raw_data(pd_num, pd_time, pd_pos, csv_file)
|
||||
plot_pd_dat(pd_num, pd_time, pd_pos, data_set)
|
||||
|
||||
#2
|
||||
data_set = './MiRAFLEX-tests-2019-09-13/2019-09-13_10mmin_no_pd_mschine'
|
||||
data_file = "{0}.txt".format(data_set)
|
||||
csv_file = "{0}.csv".format(data_set)
|
||||
[pd_num, pd_time, pd_pos] = get_pd_data(data_file)
|
||||
save_raw_data(pd_num, pd_time, pd_pos, csv_file)
|
||||
plot_pd_dat(pd_num, pd_time, pd_pos, data_set)
|
||||
|
||||
#3
|
||||
data_set = './MiRAFLEX-tests-2019-09-13/2019-09-13_15mmin_ramp_no_pd_maschine'
|
||||
data_file = "{0}.txt".format(data_set)
|
||||
csv_file = "{0}.csv".format(data_set)
|
||||
[pd_num, pd_time, pd_pos] = get_pd_data(data_file)
|
||||
save_raw_data(pd_num, pd_time, pd_pos, csv_file)
|
||||
plot_pd_dat(pd_num, pd_time, pd_pos, data_set)
|
||||
|
||||
#4
|
||||
data_set = './MiRAFLEX-tests-2019-09-13/2019-09-13_20mmin_direct_no_pd_maschine'
|
||||
data_file = "{0}.txt".format(data_set)
|
||||
csv_file = "{0}.csv".format(data_set)
|
||||
[pd_num, pd_time, pd_pos] = get_pd_data(data_file)
|
||||
save_raw_data(pd_num, pd_time, pd_pos, csv_file)
|
||||
plot_pd_dat(pd_num, pd_time, pd_pos, data_set)
|
||||
|
||||
#5
|
||||
data_set = './MiRAFLEX-tests-2019-09-13/2019-09-13_20mmin_direct_no_pd_maschine_02'
|
||||
data_file = "{0}.txt".format(data_set)
|
||||
csv_file = "{0}.csv".format(data_set)
|
||||
[pd_num, pd_time, pd_pos] = get_pd_data(data_file)
|
||||
save_raw_data(pd_num, pd_time, pd_pos, csv_file)
|
||||
plot_pd_dat(pd_num, pd_time, pd_pos, data_set)
|
||||
|
||||
#6
|
||||
data_set = './MiRAFLEX-tests-2019-09-13/2019-09-13_30mmin_ramp_no_pd_maschine'
|
||||
data_file = "{0}.txt".format(data_set)
|
||||
csv_file = "{0}.csv".format(data_set)
|
||||
[pd_num, pd_time, pd_pos] = get_pd_data(data_file)
|
||||
save_raw_data(pd_num, pd_time, pd_pos, csv_file)
|
||||
plot_pd_dat(pd_num, pd_time, pd_pos, data_set)
|
||||
|
||||
#7
|
||||
data_set = './MiRAFLEX-tests-2019-09-13/2019-09-13_30mmin_ramp_no_pd_maschine_02'
|
||||
data_file = "{0}.txt".format(data_set)
|
||||
csv_file = "{0}.csv".format(data_set)
|
||||
[pd_num, pd_time, pd_pos] = get_pd_data(data_file)
|
||||
save_raw_data(pd_num, pd_time, pd_pos, csv_file)
|
||||
plot_pd_dat(pd_num, pd_time, pd_pos, data_set)
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
|
@ -0,0 +1,76 @@
|
|||
# HMB log file
|
||||
< 2019_07_30_h09:39:37 > Loading Configuration file ./config/default.cfg
|
||||
< 2019_07_30_h09:39:37 > Encoder Resolution = 20.0000000000
|
||||
< 2019_07_30_h09:39:37 > Print-Head Resolution type = dpi
|
||||
< 2019_07_30_h09:39:37 > Print-Head Resolution = 1200.0000000000
|
||||
< 2019_07_30_h09:39:37 > Encoder Source = 0
|
||||
< 2019_07_30_h09:39:37 > Internal Encoder Frequency = 5000.0000000000
|
||||
< 2019_07_30_h09:39:37 > Encoder Phase = 1
|
||||
< 2019_07_30_h09:39:37 > Encoder Edge = 2
|
||||
< 2019_07_30_h09:39:37 > Encoder Directionality = 0
|
||||
< 2019_07_30_h09:39:37 > PD Source = 3
|
||||
< 2019_07_30_h09:39:37 > PD Edge = 0
|
||||
< 2019_07_30_h09:39:37 > Print-Mode = Continuous
|
||||
< 2019_07_30_h09:39:37 > PD-Type = None
|
||||
< 2019_07_30_h09:39:37 > Image Length = 0.0000000000 pixel
|
||||
< 2019_07_30_h09:39:37 > Gap Length = 0.0000000000 pixel
|
||||
< 2019_07_30_h09:39:37 > Print-Head Width = 0.0000000000 pixel
|
||||
< 2019_07_30_h09:39:37 > Forward-Pass Pre-Print Buffer Length = 0.0000000000 pixel
|
||||
< 2019_07_30_h09:39:37 > Swathe Length = 0.0000000000 pixel
|
||||
< 2019_07_30_h09:39:37 > Reverse-Pass Offset = 0.0000000000 pixel
|
||||
< 2019_07_30_h09:39:37 > Pre-Print Additional Movement = 0.0000000000 mm
|
||||
< 2019_07_30_h09:39:37 > Daisy-Chain Enable = 1
|
||||
< 2019_07_30_h09:39:37 > Daisy-Chain Position = 1
|
||||
< 2019_07_30_h09:39:37 > Daisy-Chain Length = 1
|
||||
< 2019_07_30_h09:39:37 > Configuration file loaded.
|
||||
< 2019_07_30_h09:39:37 > Make sure to be connected to the EMB Server and press the button 'Apply' to configure the EMB
|
||||
< 2019_07_30_h09:39:37 > Starting Remote-Server on port 6124
|
||||
< 2019_07_30_h09:39:46 > ERROR: Unable to connect to the EMB-server on IP address 192.168.79.139
|
||||
< 2019_07_30_h09:40:21 > Opened connection to IP 192.168.79.139, Port 6121
|
||||
< 2019_07_30_h09:40:21 > show server.version
|
||||
< 2019_07_30_h09:40:21 > hmb_remote_server version 1.10016.0.5356
|
||||
|
||||
< 2019_07_30_h09:40:21 > show fpm_ctrl.fw_info
|
||||
< 2019_07_30_h09:40:21 > GIS-HMB Board - Firmware version is F003
|
||||
|
||||
< 2019_07_30_h09:40:23 > set diag.pd_watchdog_enable 0 0.1
|
||||
< 2019_07_30_h09:40:23 > set diag.polling 7 200
|
||||
< 2019_07_30_h09:42:49 > show print.force_all_zeros
|
||||
< 2019_07_30_h09:42:49 > 0
|
||||
|
||||
< 2019_07_30_h09:43:05 > set pg.wh_wheel_corr 1 4827
|
||||
< 2019_07_30_h09:43:05 > W&H - Wheel Correction Enabled
|
||||
< 2019_07_30_h09:43:30 > <Detected-PD> Event-Number #1, Time = 500.092 s, Positition = 101.540000 mm (abs_pos = 20308)
|
||||
< 2019_07_30_h09:43:37 > <Wheel-Correction> - Rotation Count = 1, Position Error = -2.000, Division-Ratio Correction = -0.00331500
|
||||
< 2019_07_30_h09:43:37 > <Detected-PD> Event-Number #2, Time = 506.773 s, Positition = 198.080000 mm (abs_pos = 39616)
|
||||
< 2019_07_30_h09:43:44 > <Wheel-Correction> - Rotation Count = 2, Position Error = 1.000, Division-Ratio Correction = -0.00000000
|
||||
< 2019_07_30_h09:43:44 > <Detected-PD> Event-Number #3, Time = 513.464 s, Positition = 294.620000 mm (abs_pos = 58924)
|
||||
< 2019_07_30_h09:43:46 > <Detected-PD> Event-Number #4, Time = 515.962 s, Positition = 391.160000 mm (abs_pos = 78232)
|
||||
< 2019_07_30_h09:43:47 > <Wheel-Correction> - Rotation Count = 3, Position Error = 2.000, Division-Ratio Correction = 0.00248600
|
||||
< 2019_07_30_h09:43:49 > <Wheel-Correction> - Rotation Count = 4, Position Error = -1.000, Division-Ratio Correction = -0.00082900
|
||||
< 2019_07_30_h09:43:49 > <Detected-PD> Event-Number #5, Time = 518.668 s, Positition = 487.700000 mm (abs_pos = 97540)
|
||||
< 2019_07_30_h09:43:51 > <Detected-PD> Event-Number #6, Time = 520.496 s, Positition = 584.240000 mm (abs_pos = 116848)
|
||||
< 2019_07_30_h09:43:51 > <Wheel-Correction> - Rotation Count = 5, Position Error = 0.000, Division-Ratio Correction = -0.00000000
|
||||
< 2019_07_30_h09:43:52 > <Detected-PD> Event-Number #7, Time = 522.121 s, Positition = 680.780000 mm (abs_pos = 136156)
|
||||
< 2019_07_30_h09:43:53 > <Wheel-Correction> - Rotation Count = 6, Position Error = 0.000, Division-Ratio Correction = -0.00000000
|
||||
< 2019_07_30_h09:43:54 > <Detected-PD> Event-Number #8, Time = 523.475 s, Positition = 777.320000 mm (abs_pos = 155464)
|
||||
< 2019_07_30_h09:43:54 > <Wheel-Correction> - Rotation Count = 7, Position Error = 0.000, Division-Ratio Correction = -0.00000000
|
||||
< 2019_07_30_h09:44:12 > <Detected-PD> Event-Number #9, Time = 542.085 s, Positition = 872.320000 mm (abs_pos = 174464)
|
||||
< 2019_07_30_h09:44:14 > <Wheel-Correction> - Rotation Count = 8, Position Error = -1.000, Division-Ratio Correction = -0.51046200
|
||||
< 2019_07_30_h09:44:15 > <Detected-PD> Event-Number #10, Time = 544.155 s, Positition = 967.320000 mm (abs_pos = 193464)
|
||||
< 2019_07_30_h09:44:15 > <Wheel-Correction> - Rotation Count = 9, Position Error = -1.000, Division-Ratio Correction = -0.25688900
|
||||
< 2019_07_30_h09:44:17 > <Wheel-Correction> - Rotation Count = 10, Position Error = 2.000, Division-Ratio Correction = -0.25274600
|
||||
< 2019_07_30_h09:44:17 > <Detected-PD> Event-Number #11, Time = 546.342 s, Positition = 1062.320000 mm (abs_pos = 212464)
|
||||
< 2019_07_30_h09:44:19 > <Detected-PD> Event-Number #12, Time = 548.990 s, Positition = 1157.320000 mm (abs_pos = 231464)
|
||||
< 2019_07_30_h09:44:20 > <Wheel-Correction> - Rotation Count = 11, Position Error = -1.000, Division-Ratio Correction = -0.25606000
|
||||
< 2019_07_30_h09:44:22 > <Detected-PD> Event-Number #13, Time = 551.806 s, Positition = 1252.320000 mm (abs_pos = 250464)
|
||||
< 2019_07_30_h09:44:22 > <Wheel-Correction> - Rotation Count = 12, Position Error = 0.000, Division-Ratio Correction = -0.25523200
|
||||
< 2019_07_30_h09:44:24 > <Detected-PD> Event-Number #14, Time = 553.494 s, Positition = 1347.320000 mm (abs_pos = 269464)
|
||||
< 2019_07_30_h09:44:24 > <Wheel-Correction> - Rotation Count = 13, Position Error = 0.000, Division-Ratio Correction = -0.25523200
|
||||
< 2019_07_30_h09:44:25 > <Wheel-Correction> - Rotation Count = 14, Position Error = 0.000, Division-Ratio Correction = -0.25523200
|
||||
< 2019_07_30_h09:44:25 > <Detected-PD> Event-Number #15, Time = 554.990 s, Positition = 1442.320000 mm (abs_pos = 288464)
|
||||
< 2019_07_30_h09:59:11 > set diag.polling 0 200
|
||||
< 2019_07_30_h09:59:11 > set server.disconnect
|
||||
< 2019_07_30_h09:59:11 > Closed connection to 192.168.79.139
|
||||
< 2019_07_30_h09:59:11 > <Wheel-Correction> - Rotation Count = -1, Position Error = 0.000, Division-Ratio Correction = -1.00000000
|
||||
< 2019_07_30_h09:59:43 > Closing EMB Console ...
|
||||
|
|
@ -0,0 +1,181 @@
|
|||
##/////////////////////////////////////////////////////////////////////////////
|
||||
## Title : wheel_correction_analysis
|
||||
##/////////////////////////////////////////////////////////////////////////////
|
||||
## File : wheel_correction_analysis.py
|
||||
## Author : Gianmarco Girau
|
||||
## Company : GIS
|
||||
## Target : HMB Console
|
||||
## Dependency : none
|
||||
##/////////////////////////////////////////////////////////////////////////////
|
||||
## Description: Analyze misalignment error from wheel corrections
|
||||
##/////////////////////////////////////////////////////////////////////////////
|
||||
## Last update: 2019-05-30
|
||||
##/////////////////////////////////////////////////////////////////////////////
|
||||
## Revisions :
|
||||
## Date Version Author Description
|
||||
## 2019-05-30 01.00.0a gmg Created
|
||||
##/////////////////////////////////////////////////////////////////////////////
|
||||
|
||||
|
||||
from bokeh.plotting import figure, output_file, show
|
||||
from bokeh.layouts import gridplot
|
||||
|
||||
|
||||
rotation_idx = []
|
||||
pos_err = []
|
||||
pitch_corr = []
|
||||
pd_num = []
|
||||
pd_time = []
|
||||
pd_pos = []
|
||||
|
||||
log_file_name = './hmb_log2.txt'
|
||||
data_file_name = './pitch_corr.csv'
|
||||
pd_file_name = './pd_log.csv'
|
||||
|
||||
plot_file_name_1 = './pitch_corr_1.html'
|
||||
plot_file_name_2 = './pitch_corr_2.html'
|
||||
plot_file_name_3 = './delta_pd.html'
|
||||
|
||||
##/////////////////////////////////////////////////////////////////////////////
|
||||
## Get data from the log file
|
||||
##/////////////////////////////////////////////////////////////////////////////
|
||||
|
||||
f_log = open(log_file_name, 'r')
|
||||
|
||||
for line in f_log:
|
||||
target = '<Wheel-Correction> - '
|
||||
idx =line.find(target)
|
||||
if idx != -1:
|
||||
target = 'Rotation Count = '
|
||||
idx = line.find(target)
|
||||
clist = line[idx+len(target):].split(None)
|
||||
rotation_idx.append(int(clist[0][0:-1]))
|
||||
target = 'Position Error = '
|
||||
idx = line.find(target)
|
||||
clist = line[idx + len(target):].split(None)
|
||||
pos_err.append(float(clist[0][0:-1]))
|
||||
target = 'Division-Ratio Correction = '
|
||||
idx = line.find(target)
|
||||
clist = line[idx + len(target):].split(None)
|
||||
pitch_corr.append(float(clist[0][0:-1]))
|
||||
|
||||
#print("Rotation Idx = {0:d}, Position-Error = {1:f}, Pixel-Pitch-Correction = {2:f}".format(rotation_idx[-1], pos_err[-1], pitch_corr[-1]))
|
||||
|
||||
f_log.closed
|
||||
|
||||
f_log = open(log_file_name, 'r')
|
||||
|
||||
for line in f_log:
|
||||
target = '<Detected-PD>'
|
||||
idx =line.find(target)
|
||||
if idx != -1:
|
||||
tmp = line[idx + len(target):].split('#')
|
||||
clist = tmp[1].split(',')
|
||||
pd_num.append(int(clist[0]))
|
||||
#print('PD Event = {:d}'.format(pd_num[-1]))
|
||||
target = 'Time = '
|
||||
idx = line.find(target)
|
||||
clist = line[idx + len(target):].split(None)
|
||||
pd_time.append(float(clist[0][0:-1]))
|
||||
target = 'abs_pos = '
|
||||
idx = line.find(target)
|
||||
clist = line[idx + len(target):].split(None)
|
||||
pd_pos.append(float(clist[0][0:-1]))
|
||||
|
||||
f_log.closed
|
||||
|
||||
# Save data on a separate CSV file
|
||||
|
||||
f_data = open(data_file_name, 'w')
|
||||
f_data.write("Rotation index, Position Error, Pixel-Pitch Correction" + '\n')
|
||||
for idx in range(0,len(rotation_idx)):
|
||||
f_data.write("{0:d}, {1:f}, {2:f}".format(rotation_idx[idx], pos_err[idx], pitch_corr[idx]) + '\n')
|
||||
|
||||
f_data.close
|
||||
|
||||
f_data = open(pd_file_name, 'w')
|
||||
f_data.write("PD event, Time, Position" + '\n')
|
||||
for idx in range(0,len(pd_num)):
|
||||
f_data.write("{0:d}, {1:f}, {2:f}".format(pd_num[idx], pd_time[idx], pd_pos[idx]) + '\n')
|
||||
|
||||
f_data.close
|
||||
|
||||
##/////////////////////////////////////////////////////////////////////////////
|
||||
## Plot-data
|
||||
##/////////////////////////////////////////////////////////////////////////////
|
||||
|
||||
# output to static HTML file
|
||||
output_file(plot_file_name_1)
|
||||
|
||||
plot_w = 500
|
||||
plot_h = 500
|
||||
|
||||
toolset="pan,box_zoom,reset,save"
|
||||
|
||||
# create a new plot
|
||||
s1 = figure(width=plot_w, plot_height=plot_h, title='Position Error', x_axis_label='Flexo Wheel Rotation', y_axis_label='Position Error [Encoder Steps]', tools=toolset)
|
||||
s1.circle(rotation_idx, pos_err, size=5, color="navy", alpha=0.5)
|
||||
|
||||
s2 = figure(width=plot_w, height=plot_h, x_range=s1.x_range, y_range=s1.y_range, title='Pixel-Pitch Correction', x_axis_label='Flexo Wheel Rotation', y_axis_label='Pixel-Pitch Correction [Encoder Steps]', tools=toolset)
|
||||
s2.triangle(rotation_idx, pitch_corr, size=10, color="olive", alpha=0.5)
|
||||
|
||||
#p = gridplot([[s1], [s2]], toolbar_location=None)
|
||||
p = gridplot([[s1], [s2]])
|
||||
|
||||
# show the results
|
||||
show(p)
|
||||
|
||||
# Create a second plot in um
|
||||
|
||||
# output to static HTML file
|
||||
output_file(plot_file_name_2)
|
||||
|
||||
enc_res = 5
|
||||
head_reas = 21.167
|
||||
|
||||
pos_err_um = [x*enc_res for x in pos_err]
|
||||
pitch_corr_um = [x*enc_res for x in pitch_corr]
|
||||
|
||||
plot_w = 500
|
||||
plot_h = 500
|
||||
|
||||
toolset="pan,box_zoom,reset,save"
|
||||
|
||||
# create a new plot
|
||||
s1 = figure(width=plot_w, plot_height=plot_h, title='Position Error', x_axis_label='Flexo Wheel Rotation', y_axis_label='Position Error [um]', tools=toolset)
|
||||
s1.circle(rotation_idx, pos_err_um, size=5, color="navy", alpha=0.5)
|
||||
|
||||
s2 = figure(width=plot_w, height=plot_h, x_range=s1.x_range, y_range=s1.y_range, title='Pixel-Pitch Correction', x_axis_label='Flexo Wheel Rotation', y_axis_label='Pixel-Pitch Correction [um]', tools=toolset)
|
||||
s2.triangle(rotation_idx, pitch_corr_um, size=10, color="olive", alpha=0.5)
|
||||
|
||||
#p = gridplot([[s1], [s2]], toolbar_location=None)
|
||||
p = gridplot([[s1], [s2]])
|
||||
|
||||
# show the results
|
||||
show(p)
|
||||
|
||||
# output to static HTML file
|
||||
output_file(plot_file_name_3)
|
||||
|
||||
plot_w = 500
|
||||
plot_h = 500
|
||||
|
||||
toolset="pan,box_zoom,reset,save"
|
||||
|
||||
delta_pd = []
|
||||
N = len(pd_num)
|
||||
for idx in range(1,N):
|
||||
delta_pd.append(pd_pos[idx] - pd_pos[idx-1])
|
||||
|
||||
# create a new plot
|
||||
s1 = figure(width=plot_w, plot_height=plot_h, title='PD distance [encoder pulses]', x_axis_label='PD Event', y_axis_label='PD distance [encoder pulses]', tools=toolset)
|
||||
s1.circle(pd_num[1:], delta_pd, size=5, color="navy", alpha=0.5)
|
||||
|
||||
#p = gridplot([[s1], [s2]], toolbar_location=None)
|
||||
p = gridplot([[s1]])
|
||||
|
||||
# show the results
|
||||
show(p)
|
||||
|
||||
|
||||
|
||||
594
generic_ip/pulse_generator/3/src/test/pd_jitter_verify_tb.vhd
Normal file
594
generic_ip/pulse_generator/3/src/test/pd_jitter_verify_tb.vhd
Normal file
|
|
@ -0,0 +1,594 @@
|
|||
-------------------------------------------------------------------------------
|
||||
-- Title : pd_jitter_verify_tb
|
||||
-- Project : EMB/SMB
|
||||
-------------------------------------------------------------------------------
|
||||
-- File : pd_jitter_verify_tb.vhd
|
||||
-- Author : GMG
|
||||
-- Company : Global Inkjet Systems
|
||||
-- Created : 2018-09-11
|
||||
-- Last update: 2020-04-15
|
||||
-- SVN ID : Git
|
||||
-- Standard : VHDL'2008
|
||||
-------------------------------------------------------------------------------
|
||||
-- Description:
|
||||
-- Verify the PD jitter mechanism on the Pulse-Generator
|
||||
-------------------------------------------------------------------------------
|
||||
|
||||
library ieee;
|
||||
use ieee.std_logic_1164.all;
|
||||
use ieee.numeric_std.all;
|
||||
use ieee.math_real.all;
|
||||
|
||||
use work.log_pkg.all;
|
||||
use work.avalon_verify_pkg.all;
|
||||
|
||||
use work.pulse_generator_3_pkg.all;
|
||||
|
||||
entity pd_jitter_verify_tb is
|
||||
-- ..
|
||||
end entity pd_jitter_verify_tb;
|
||||
|
||||
architecture behav of pd_jitter_verify_tb is
|
||||
|
||||
constant CLK_PERIOD : time := 10 ns;
|
||||
|
||||
-- Logging Verbosity Level
|
||||
constant VERBOSITY_LEVEL : verb_level_t := VMEDIUM;
|
||||
|
||||
-----------------------------------------------------------------------------
|
||||
-- TB Functions / Procedures
|
||||
-----------------------------------------------------------------------------
|
||||
|
||||
procedure wait_latency(
|
||||
signal clk : in std_logic;
|
||||
cycles : in natural) is
|
||||
begin
|
||||
for i in 1 to cycles loop
|
||||
wait until clk = '1' and clk'event;
|
||||
end loop; -- i
|
||||
end procedure wait_latency;
|
||||
|
||||
-----------------------------------------------------------------------------
|
||||
-- Signal declarations
|
||||
-----------------------------------------------------------------------------
|
||||
|
||||
signal reset_n : std_logic := '0';
|
||||
signal clk : std_logic := '0';
|
||||
signal init : std_logic;
|
||||
signal pd_in : std_logic;
|
||||
signal abs_position : std_logic_vector(31 downto 0);
|
||||
signal dp_dir : std_logic;
|
||||
signal fire_req : std_logic;
|
||||
signal fire_req_vec : std_logic_vector(31 downto 0);
|
||||
signal filtered_pd : std_logic;
|
||||
signal ch_pd : std_logic;
|
||||
signal ch_mask : std_logic;
|
||||
signal raw_fire_req : std_logic;
|
||||
signal avs_address : std_logic_vector(10 downto 0);
|
||||
signal avs_write : std_logic;
|
||||
signal avs_writedata : std_logic_vector(31 downto 0);
|
||||
signal avs_read : std_logic;
|
||||
signal avs_readdatavalid : std_logic;
|
||||
signal avs_readdata : std_logic_vector(31 downto 0);
|
||||
--
|
||||
signal avs_m : mm_m_rec_t;
|
||||
signal avs_s : mm_s_rec_t;
|
||||
--
|
||||
signal pd_in_cnt : integer;
|
||||
signal pd_out_cnt : integer;
|
||||
--
|
||||
signal test_completed : boolean;
|
||||
signal setup : boolean;
|
||||
signal running : boolean;
|
||||
signal error_flag : boolean;
|
||||
signal passed : boolean;
|
||||
signal failed : boolean;
|
||||
|
||||
begin -- architecture behav
|
||||
|
||||
clk <= not clk after 0.5*CLK_PERIOD;
|
||||
|
||||
-----------------------------------------------------------------------------
|
||||
-- UUT
|
||||
-----------------------------------------------------------------------------
|
||||
|
||||
iUUT: entity work.pulse_generator_3
|
||||
generic map (
|
||||
pulse_delay_equal_en => true)
|
||||
port map (
|
||||
clk => clk,
|
||||
reset_n => reset_n,
|
||||
init => init,
|
||||
pd_in => pd_in,
|
||||
abs_position => abs_position,
|
||||
dp_dir => dp_dir,
|
||||
fire_req_vec => fire_req_vec,
|
||||
filtered_pd => filtered_pd,
|
||||
ch_pd => ch_pd,
|
||||
ch_mask => ch_mask,
|
||||
raw_fire_req => raw_fire_req,
|
||||
avs_address => avs_address,
|
||||
avs_write => avs_write,
|
||||
avs_writedata => avs_writedata,
|
||||
avs_read => avs_read,
|
||||
avs_readdatavalid => avs_readdatavalid,
|
||||
avs_readdata => avs_readdata);
|
||||
|
||||
fire_req <= fire_req_vec(0);
|
||||
|
||||
-----------------------------------------------------------------------------
|
||||
-- Avalon interface
|
||||
-----------------------------------------------------------------------------
|
||||
|
||||
clk_clk <= clk;
|
||||
reset_reset_n <= reset_n;
|
||||
|
||||
avs_s.mm_readdata <= avs_readdata;
|
||||
|
||||
avs_s.mm_readdatavalid <= avs_readdatavalid;
|
||||
|
||||
avs_s.mm_waitrequest <= '0';
|
||||
avs_s.use_readvalid <= true;
|
||||
|
||||
avs_address <= avs_m.mm_address(avs_address'range);
|
||||
avs_write <= avs_m.mm_write;
|
||||
avs_writedata <= avs_m.mm_writedata;
|
||||
avs_read <= avs_m.mm_read;
|
||||
|
||||
pCNT_CH_PD : process(reset_n, clk)
|
||||
begin
|
||||
if(reset_n = '0') then
|
||||
pd_out_cnt <= 0;
|
||||
elsif(clk = '1' and clk'event) then
|
||||
if(ch_pd = '1') then
|
||||
pd_out_cnt <= pd_out_cnt + 1;
|
||||
end if;
|
||||
end if;
|
||||
end process pCNT_CH_PD;
|
||||
|
||||
-----------------------------------------------------------------------------
|
||||
-- Testbench Logic
|
||||
-----------------------------------------------------------------------------
|
||||
|
||||
pTB_CTRL : process
|
||||
|
||||
alias dp_dir is <<signal iUUT.dp_dir_i : std_logic>>;
|
||||
|
||||
procedure issue_pd(valid_pd : boolean := true) is
|
||||
begin
|
||||
|
||||
wait until clk = '1' and clk'event;
|
||||
pd_in <= '1';
|
||||
wait until clk = '1' and clk'event;
|
||||
pd_in <= '0';
|
||||
if(valid_pd = true) then
|
||||
pd_in_cnt <= pd_in_cnt + 1;
|
||||
end if;
|
||||
|
||||
end procedure issue_pd;
|
||||
|
||||
procedure check_pd is
|
||||
begin
|
||||
for i in 1 to 12 loop
|
||||
wait until clk = '1' and clk'event;
|
||||
end loop; -- i
|
||||
if(pd_out_cnt /= pd_in_cnt) then
|
||||
if(pd_out_cnt > pd_in_cnt) then
|
||||
log("ERROR: Detected faulty Channel PD.", VLOW);
|
||||
else
|
||||
log("ERROR: Missing Channel PD.", VLOW);
|
||||
end if;
|
||||
error_flag <= true;
|
||||
end if;
|
||||
|
||||
end procedure check_pd;
|
||||
|
||||
variable addr : std_logic_vector(31 downto 0) := (others => '0');
|
||||
variable data : std_logic_vector(31 downto 0) := (others => '0');
|
||||
|
||||
begin
|
||||
|
||||
-- Set the verbosity level for logging
|
||||
set_log_verbosity(VERBOSITY_LEVEL);
|
||||
--set_log_verbosity(VHIGH);
|
||||
|
||||
-- initilialize the Avalon master-bus
|
||||
mm_m_init(avs_m);
|
||||
|
||||
log_header("PD Jitter verification:", VLOW);
|
||||
|
||||
setup <= false;
|
||||
running <= false;
|
||||
passed <= false;
|
||||
error_flag <= false;
|
||||
|
||||
init <= '0';
|
||||
pd_in <= '0';
|
||||
pd_in_cnt <= 0;
|
||||
abs_position <= (others => '0');
|
||||
|
||||
-- Reset
|
||||
reset_n <= '0';
|
||||
wait for 100 ns;
|
||||
wait until clk = '1' and clk'event;
|
||||
reset_n <= '1';
|
||||
|
||||
wait for 200 ns;
|
||||
-- enable the pulse generator
|
||||
addr := std_logic_vector(resize(unsigned(PULSE_GEN_CTRL_REG), 32));
|
||||
data := X"0000_0001";
|
||||
mm_32b_write(addr, data, avs_s, avs_m);
|
||||
|
||||
---------------------------------------------------------------------------
|
||||
-- DP-DIR = '0'
|
||||
---------------------------------------------------------------------------
|
||||
|
||||
log("DP-DIR = '0'", VLOW);
|
||||
log_separator_line(VLOW);
|
||||
|
||||
|
||||
dp_dir <= force '0';
|
||||
|
||||
wait for 200 ns;
|
||||
wait until clk = '1' and clk'event;
|
||||
init <= '1';
|
||||
wait until clk = '1' and clk'event;
|
||||
wait until clk = '1' and clk'event;
|
||||
wait until clk = '1' and clk'event;
|
||||
init <= '0';
|
||||
wait for 200 ns;
|
||||
wait until clk = '1' and clk'event;
|
||||
|
||||
---------------------------------------------------------------------------
|
||||
-- DIR-0, Init Pos = 0
|
||||
---------------------------------------------------------------------------
|
||||
|
||||
log("Issueing PD on ABS_POS = 0", VLOW);
|
||||
|
||||
for n in 0 to 9 loop
|
||||
issue_pd;
|
||||
check_pd;
|
||||
wait_latency(clk, 10);
|
||||
abs_position <= std_logic_vector(signed(abs_position)+ 1);
|
||||
end loop; -- n
|
||||
|
||||
log("Go back to ABS_POS = 0", VLOW);
|
||||
for n in 0 to 9 loop
|
||||
wait_latency(clk, 10);
|
||||
abs_position <= std_logic_vector(signed(abs_position)- 1);
|
||||
end loop; -- n
|
||||
|
||||
log("Issueing again PD on ABS_POS = 0", VLOW);
|
||||
for n in 0 to 9 loop
|
||||
issue_pd(false);
|
||||
check_pd;
|
||||
wait_latency(clk, 10);
|
||||
abs_position <= std_logic_vector(signed(abs_position)+ 1);
|
||||
end loop; -- n
|
||||
|
||||
for n in 0 to 9 loop
|
||||
issue_pd;
|
||||
check_pd;
|
||||
wait_latency(clk, 10);
|
||||
abs_position <= std_logic_vector(signed(abs_position)+ 1);
|
||||
end loop; -- n
|
||||
|
||||
wait for 1 us;
|
||||
|
||||
---------------------------------------------------------------------------
|
||||
-- DIR-0, Init Pos = -10
|
||||
---------------------------------------------------------------------------
|
||||
|
||||
|
||||
log("Issueing PD DIR-0, on ABS_POS = -10", VLOW);
|
||||
|
||||
abs_position <= std_logic_vector(to_signed(-10,32));
|
||||
wait_latency(clk, 3);
|
||||
init <= '1';
|
||||
wait_latency(clk, 2);
|
||||
init <= '0';
|
||||
wait_latency(clk, 10);
|
||||
|
||||
log("Issueing PD on ABS_POS = -10", VLOW);
|
||||
|
||||
for n in 0 to 9 loop
|
||||
issue_pd;
|
||||
check_pd;
|
||||
wait_latency(clk, 10);
|
||||
abs_position <= std_logic_vector(signed(abs_position)+ 1);
|
||||
end loop; -- n
|
||||
|
||||
log("Go back to ABS_POS = -10", VLOW);
|
||||
for n in 0 to 9 loop
|
||||
wait_latency(clk, 10);
|
||||
abs_position <= std_logic_vector(signed(abs_position)- 1);
|
||||
end loop; -- n
|
||||
|
||||
log("Issueing again PD on ABS_POS = -10", VLOW);
|
||||
for n in 0 to 9 loop
|
||||
issue_pd(false);
|
||||
check_pd;
|
||||
wait_latency(clk, 10);
|
||||
abs_position <= std_logic_vector(signed(abs_position)+ 1);
|
||||
end loop; -- n
|
||||
|
||||
for n in 0 to 9 loop
|
||||
issue_pd;
|
||||
check_pd;
|
||||
wait_latency(clk, 10);
|
||||
abs_position <= std_logic_vector(signed(abs_position)+ 1);
|
||||
end loop; -- n
|
||||
|
||||
wait for 1 us;
|
||||
|
||||
---------------------------------------------------------------------------
|
||||
-- DIR-0, Mid-crossing
|
||||
---------------------------------------------------------------------------
|
||||
|
||||
log_separator_line(VLOW);
|
||||
log("DP-DIR = '0', Mid-Crossing", VLOW);
|
||||
log_separator_line(VLOW);
|
||||
|
||||
abs_position <= X"7FFFFFF8";
|
||||
wait_latency(clk, 3);
|
||||
init <= '1';
|
||||
wait_latency(clk, 2);
|
||||
init <= '0';
|
||||
wait_latency(clk, 10);
|
||||
|
||||
log("Issueing PD on ABS_POS = 0x7FFFFFF8", VLOW);
|
||||
|
||||
for n in 0 to 15 loop
|
||||
issue_pd;
|
||||
check_pd;
|
||||
wait_latency(clk, 10);
|
||||
abs_position <= std_logic_vector(signed(abs_position)+ 1);
|
||||
end loop; -- n
|
||||
|
||||
log("Go back to ABS_POS = 0x7FFFFFF8", VLOW);
|
||||
for n in 0 to 15 loop
|
||||
wait_latency(clk, 10);
|
||||
abs_position <= std_logic_vector(signed(abs_position)- 1);
|
||||
end loop; -- n
|
||||
|
||||
log("Issueing again PD on ABS_POS = 0x7FFFFFF8", VLOW);
|
||||
for n in 0 to 15 loop
|
||||
issue_pd(false);
|
||||
check_pd;
|
||||
wait_latency(clk, 10);
|
||||
abs_position <= std_logic_vector(signed(abs_position)+ 1);
|
||||
end loop; -- n
|
||||
|
||||
for n in 0 to 15 loop
|
||||
issue_pd;
|
||||
check_pd;
|
||||
wait_latency(clk, 10);
|
||||
abs_position <= std_logic_vector(signed(abs_position)+ 1);
|
||||
end loop; -- n
|
||||
|
||||
log("Performing a zero-crossing", VLOW);
|
||||
wait_latency(clk, 10);
|
||||
|
||||
abs_position <= std_logic_vector(to_signed(-10,32));
|
||||
wait_latency(clk, 10);
|
||||
issue_pd;
|
||||
for n in 0 to 19 loop
|
||||
abs_position <= std_logic_vector(signed(abs_position)+ 1);
|
||||
wait_latency(clk, 10);
|
||||
end loop; -- n
|
||||
issue_pd;
|
||||
wait_latency(clk, 10);
|
||||
abs_position <= std_logic_vector(signed(abs_position)+ 1);
|
||||
wait_latency(clk, 10);
|
||||
|
||||
abs_position <= X"7FFFFFF8";
|
||||
log("Issueing a second set of PDs at ABS_POS = 0x7FFFFFF8", VLOW);
|
||||
wait_latency(clk, 10);
|
||||
|
||||
for n in 0 to 15 loop
|
||||
issue_pd;
|
||||
check_pd;
|
||||
wait_latency(clk, 10);
|
||||
abs_position <= std_logic_vector(signed(abs_position)+ 1);
|
||||
end loop; -- n
|
||||
|
||||
wait for 1 us;
|
||||
|
||||
|
||||
---------------------------------------------------------------------------
|
||||
-- DP-DIR = '1'
|
||||
---------------------------------------------------------------------------
|
||||
|
||||
log_separator_line(VLOW);
|
||||
log("DP-DIR = '1'", VLOW);
|
||||
log_separator_line(VLOW);
|
||||
|
||||
dp_dir <= force '1';
|
||||
|
||||
abs_position <= std_logic_vector(to_signed(0,32));
|
||||
wait for 200 ns;
|
||||
wait until clk = '1' and clk'event;
|
||||
init <= '1';
|
||||
wait until clk = '1' and clk'event;
|
||||
wait until clk = '1' and clk'event;
|
||||
wait until clk = '1' and clk'event;
|
||||
init <= '0';
|
||||
wait for 200 ns;
|
||||
wait until clk = '1' and clk'event;
|
||||
|
||||
---------------------------------------------------------------------------
|
||||
-- DIR-1, Init Pos = 0
|
||||
---------------------------------------------------------------------------
|
||||
|
||||
log("Issueing PD on ABS_POS = 0", VLOW);
|
||||
|
||||
for n in 0 to 9 loop
|
||||
issue_pd;
|
||||
check_pd;
|
||||
wait_latency(clk, 10);
|
||||
abs_position <= std_logic_vector(signed(abs_position)- 1);
|
||||
end loop; -- n
|
||||
|
||||
log("Go back to ABS_POS = 0", VLOW);
|
||||
for n in 0 to 9 loop
|
||||
wait_latency(clk, 10);
|
||||
abs_position <= std_logic_vector(signed(abs_position)+ 1);
|
||||
end loop; -- n
|
||||
|
||||
log("Issueing again PD on ABS_POS = 0", VLOW);
|
||||
for n in 0 to 9 loop
|
||||
issue_pd(false);
|
||||
check_pd;
|
||||
wait_latency(clk, 10);
|
||||
abs_position <= std_logic_vector(signed(abs_position)- 1);
|
||||
end loop; -- n
|
||||
|
||||
for n in 0 to 9 loop
|
||||
issue_pd;
|
||||
check_pd;
|
||||
wait_latency(clk, 10);
|
||||
abs_position <= std_logic_vector(signed(abs_position)- 1);
|
||||
end loop; -- n
|
||||
|
||||
wait for 1 us;
|
||||
|
||||
---------------------------------------------------------------------------
|
||||
-- DIR-1, Init Pos = +10
|
||||
---------------------------------------------------------------------------
|
||||
|
||||
abs_position <= std_logic_vector(to_signed(+10,32));
|
||||
wait_latency(clk, 3);
|
||||
init <= '1';
|
||||
wait_latency(clk, 2);
|
||||
init <= '0';
|
||||
wait_latency(clk, 10);
|
||||
|
||||
log("Issueing PD on ABS_POS = +10", VLOW);
|
||||
|
||||
for n in 0 to 9 loop
|
||||
issue_pd;
|
||||
check_pd;
|
||||
wait_latency(clk, 10);
|
||||
abs_position <= std_logic_vector(signed(abs_position)- 1);
|
||||
end loop; -- n
|
||||
|
||||
log("Go back to ABS_POS = +10", VLOW);
|
||||
for n in 0 to 9 loop
|
||||
wait_latency(clk, 10);
|
||||
abs_position <= std_logic_vector(signed(abs_position)+ 1);
|
||||
end loop; -- n
|
||||
|
||||
log("Issueing again PD on ABS_POS = +10", VLOW);
|
||||
for n in 0 to 9 loop
|
||||
issue_pd(false);
|
||||
check_pd;
|
||||
wait_latency(clk, 10);
|
||||
abs_position <= std_logic_vector(signed(abs_position)- 1);
|
||||
end loop; -- n
|
||||
|
||||
for n in 0 to 9 loop
|
||||
issue_pd;
|
||||
check_pd;
|
||||
wait_latency(clk, 10);
|
||||
abs_position <= std_logic_vector(signed(abs_position)- 1);
|
||||
end loop; -- n
|
||||
|
||||
wait for 1 us;
|
||||
|
||||
---------------------------------------------------------------------------
|
||||
-- DIR-1, Mid-crossing
|
||||
---------------------------------------------------------------------------
|
||||
|
||||
log_separator_line(VLOW);
|
||||
log("DP-DIR = '1', Mid-Crossing", VLOW);
|
||||
log_separator_line(VLOW);
|
||||
|
||||
abs_position <= X"80000008";
|
||||
wait_latency(clk, 3);
|
||||
init <= '1';
|
||||
wait_latency(clk, 2);
|
||||
init <= '0';
|
||||
wait_latency(clk, 10);
|
||||
|
||||
log("Issueing PD on ABS_POS = 0x80000008", VLOW);
|
||||
|
||||
for n in 0 to 15 loop
|
||||
issue_pd;
|
||||
check_pd;
|
||||
wait_latency(clk, 10);
|
||||
abs_position <= std_logic_vector(signed(abs_position)- 1);
|
||||
end loop; -- n
|
||||
|
||||
log("Go back to ABS_POS = 0x80000008", VLOW);
|
||||
for n in 0 to 15 loop
|
||||
wait_latency(clk, 10);
|
||||
abs_position <= std_logic_vector(signed(abs_position)+ 1);
|
||||
end loop; -- n
|
||||
|
||||
log("Issueing again PD on ABS_POS = 0x80000008", VLOW);
|
||||
for n in 0 to 15 loop
|
||||
issue_pd(false);
|
||||
check_pd;
|
||||
wait_latency(clk, 10);
|
||||
abs_position <= std_logic_vector(signed(abs_position)- 1);
|
||||
end loop; -- n
|
||||
|
||||
for n in 0 to 15 loop
|
||||
issue_pd;
|
||||
check_pd;
|
||||
wait_latency(clk, 10);
|
||||
abs_position <= std_logic_vector(signed(abs_position)- 1);
|
||||
end loop; -- n
|
||||
|
||||
log("Performing a zero-crossing", VLOW);
|
||||
wait_latency(clk, 10);
|
||||
|
||||
abs_position <= std_logic_vector(to_signed(+10,32));
|
||||
wait_latency(clk, 10);
|
||||
issue_pd;
|
||||
for n in 0 to 19 loop
|
||||
abs_position <= std_logic_vector(signed(abs_position)- 1);
|
||||
wait_latency(clk, 10);
|
||||
end loop; -- n
|
||||
issue_pd;
|
||||
wait_latency(clk, 10);
|
||||
abs_position <= std_logic_vector(signed(abs_position)- 1);
|
||||
wait_latency(clk, 10);
|
||||
|
||||
abs_position <= X"80000008";
|
||||
log("Issueing a second set of PDs at ABS_POS = 0x80000008", VLOW);
|
||||
wait_latency(clk, 10);
|
||||
|
||||
for n in 0 to 15 loop
|
||||
issue_pd;
|
||||
check_pd;
|
||||
wait_latency(clk, 10);
|
||||
abs_position <= std_logic_vector(signed(abs_position)- 1);
|
||||
end loop; -- n
|
||||
|
||||
wait for 20 us;
|
||||
|
||||
running <= false;
|
||||
passed <= true after 100 ns;
|
||||
wait;
|
||||
|
||||
end process pTB_CTRL;
|
||||
|
||||
failed <= error_flag after 100 ns;
|
||||
|
||||
pREPORT_RESULT : process
|
||||
begin
|
||||
wait until failed = true or passed = true;
|
||||
wait for 1 us;
|
||||
log_separator_line(VLOW);
|
||||
if(failed = true) then
|
||||
log("FAILURE: test completed with errors.", VLOW);
|
||||
elsif(passed = true) then
|
||||
log("SUCCESS: test successfully completed.", VLOW);
|
||||
end if;
|
||||
log_separator_line(VLOW);
|
||||
test_completed <= true;
|
||||
end process pREPORT_RESULT;
|
||||
|
||||
|
||||
end architecture behav;
|
||||
655
generic_ip/pulse_generator/3/src/test/simple_frac_div_tb.vhd
Normal file
655
generic_ip/pulse_generator/3/src/test/simple_frac_div_tb.vhd
Normal file
|
|
@ -0,0 +1,655 @@
|
|||
-------------------------------------------------------------------------------
|
||||
-- Title : simple_frac_div_tb
|
||||
-- Project : EMB/SMB
|
||||
-------------------------------------------------------------------------------
|
||||
-- File : simple_frac_div_tb.vhd
|
||||
-- Author : GMG
|
||||
-- Company : Global Inkjet Systems
|
||||
-- Created : 2017-12-06
|
||||
-- Last update: 2019-12-02
|
||||
-- SVN ID : Git
|
||||
-- Standard : VHDL'2008
|
||||
-------------------------------------------------------------------------------
|
||||
-- Description:
|
||||
-- Testbench for the simple_frac_div.vhd
|
||||
-------------------------------------------------------------------------------
|
||||
|
||||
library ieee;
|
||||
use ieee.std_logic_1164.all;
|
||||
use ieee.numeric_std.all;
|
||||
use ieee.math_real.all;
|
||||
|
||||
library OSVVM;
|
||||
use OSVVM.RandomBasePkg.all;
|
||||
use OSVVM.RandomPkg.all;
|
||||
|
||||
use work.log_pkg.all;
|
||||
|
||||
entity simple_frac_div_tb is
|
||||
-- ..
|
||||
end entity simple_frac_div_tb;
|
||||
|
||||
architecture behav of simple_frac_div_tb is
|
||||
|
||||
constant CLK_PERIOD : time := 10 ns;
|
||||
|
||||
-- Logging Verbosity Level
|
||||
constant VERBOSITY_LEVEL : verb_level_t := VMEDIUM;
|
||||
|
||||
constant MAX_DIST : natural := 10000;
|
||||
|
||||
-- define the percentage of reverse steps, with respect to the intended
|
||||
-- direction, while advancing the position:
|
||||
-- 0 => no reverse movement at all
|
||||
-- 20 => 20% of position increments are in the opposite dirtection
|
||||
-- 49 => Essentially this is an oscillation around the centre position with a
|
||||
-- tiny bias in the intended direction!
|
||||
constant POS_RANDOM_PERC : natural range 0 to 49 := 0; -- define
|
||||
|
||||
constant INTRA_POS_LATENCY : natural := 5; -- number of clock cycles between position increments
|
||||
|
||||
-----------------------------------------------------------------------------
|
||||
-- TB Functions / Procedures
|
||||
-----------------------------------------------------------------------------
|
||||
|
||||
procedure wait_latency(
|
||||
signal clk : in std_logic;
|
||||
cycles : in natural) is
|
||||
begin
|
||||
for i in 1 to cycles loop
|
||||
wait until clk = '1' and clk'event;
|
||||
end loop; -- i
|
||||
end procedure wait_latency;
|
||||
|
||||
-- convert the div_ratio to a fixed point integer with a 24 bits fractional part
|
||||
function ratio_to_fixed_point (ratio : real) return std_logic_vector is
|
||||
variable mantissa : real;
|
||||
variable int_vec : std_logic_vector(33 downto 0) := (others => '0');
|
||||
begin
|
||||
-- Compute the ratio in two steps to avoid intermediate integer
|
||||
-- representations exceeding 32 bits:
|
||||
-- Compute first the integer part
|
||||
int_vec(33 downto 24) := std_logic_vector(to_unsigned(integer(floor(ratio)), 10));
|
||||
-- Compute the mantissa
|
||||
mantissa := (ratio-floor(ratio))*real(2**24);
|
||||
int_vec(23 downto 0) := std_logic_vector(to_unsigned(integer(mantissa), 24));
|
||||
return int_vec;
|
||||
end function ratio_to_fixed_point;
|
||||
|
||||
-- convert the sub-pixel offset to a fixed point integer with a 24 bits fractional part
|
||||
function offset_to_fixed_point (off : real; ratio: real) return std_logic_vector is
|
||||
variable norm_ratio : real;
|
||||
variable mantissa : real;
|
||||
variable int_vec : std_logic_vector(33 downto 0) := (others => '0');
|
||||
begin
|
||||
norm_ratio := off*ratio;
|
||||
-- Compute the ratio in two steps to avoid intermediate integer
|
||||
-- representations exceeding 32 bits:
|
||||
-- Compute first the integer part
|
||||
int_vec(33 downto 24) := std_logic_vector(to_unsigned(integer(floor(norm_ratio)), 10));
|
||||
-- Compute the mantissa
|
||||
mantissa := (norm_ratio-floor(norm_ratio))*real(2**24);
|
||||
int_vec(23 downto 0) := std_logic_vector(to_unsigned(integer(mantissa), 24));
|
||||
return int_vec;
|
||||
end function offset_to_fixed_point;
|
||||
|
||||
|
||||
function check_result(ratio : real; offset : real; delta_pos : integer; fire_cnt : integer; silent_mode : boolean := false) return boolean is
|
||||
variable res : boolean;
|
||||
variable exp_fire : integer;
|
||||
begin
|
||||
if(real(delta_pos) < ratio*offset) then
|
||||
exp_fire := 0;
|
||||
else
|
||||
--exp_fire := integer(real(delta_pos)/ratio - offset+0.5);
|
||||
exp_fire := integer((1.0 + real(delta_pos)/ratio - offset));
|
||||
end if;
|
||||
if(silent_mode = false) then
|
||||
log("Check Result:",VMEDIUM);
|
||||
log("ratio = " & to_string(ratio) & ", offset = " & to_string(offset) & ", delta_pos = " & to_string(delta_pos),VMEDIUM);
|
||||
end if;
|
||||
if(abs(exp_fire-fire_cnt) <= 1) then
|
||||
res := true;
|
||||
if(silent_mode = false) then
|
||||
log("Check Result:",VMEDIUM);
|
||||
log("ratio = " & to_string(ratio) & ", offset = " & to_string(offset) & ", delta_pos = " & to_string(delta_pos),VMEDIUM);
|
||||
log("Expected Fire-Pulses = " & to_string(exp_fire) & ", detected = " & to_string(fire_cnt),VMEDIUM);
|
||||
end if;
|
||||
else
|
||||
res := false;
|
||||
log("Check Result:",VMEDIUM);
|
||||
log("ratio = " & to_string(ratio) & ", offset = " & to_string(offset) & ", delta_pos = " & to_string(delta_pos),VMEDIUM);
|
||||
log("ERROR: Expected Fire-Pulses = " & to_string(exp_fire) & ", detected = " & to_string(fire_cnt),VMEDIUM);
|
||||
end if;
|
||||
return res;
|
||||
end function check_result;
|
||||
|
||||
-----------------------------------------------------------------------------
|
||||
-- Signal declarations
|
||||
-----------------------------------------------------------------------------
|
||||
|
||||
signal reset_n : std_logic := '0';
|
||||
signal clk : std_logic := '0';
|
||||
signal enable : std_logic;
|
||||
signal upd_max_pos : std_logic;
|
||||
signal upd_min_pos : std_logic;
|
||||
signal abs_pos_max : std_logic_vector(31 downto 0);
|
||||
signal abs_pos_min : std_logic_vector(31 downto 0);
|
||||
signal dir : std_logic;
|
||||
signal offset : std_logic_vector(33 downto 0);
|
||||
signal ratio : std_logic_vector(33 downto 0);
|
||||
signal abs_pos : std_logic_vector(31 downto 0);
|
||||
signal fire : std_logic;
|
||||
signal fire_cnt : std_logic_vector(31 downto 0);
|
||||
--
|
||||
signal div_ratio : real := 1.0;
|
||||
signal pixel_offset : real := 0.0;
|
||||
signal ideal_fire : real := 0.0;
|
||||
signal firing_error : real := 0.0;
|
||||
signal pos : integer := 0;
|
||||
signal tot_fire_num : integer := 0;
|
||||
--
|
||||
signal test_completed : boolean;
|
||||
signal configuring : boolean;
|
||||
signal running : boolean;
|
||||
signal passed : boolean;
|
||||
signal failed : boolean;
|
||||
|
||||
begin -- architecture behav
|
||||
|
||||
clk <= not clk after 0.5*CLK_PERIOD;
|
||||
|
||||
-----------------------------------------------------------------------------
|
||||
-- UUTs
|
||||
-----------------------------------------------------------------------------
|
||||
|
||||
iUUT : entity work.simple_frac_div_3
|
||||
port map (
|
||||
clk => clk,
|
||||
enable => enable,
|
||||
dir => dir,
|
||||
upd_max_pos => upd_max_pos,
|
||||
upd_min_pos => upd_min_pos,
|
||||
abs_pos_max => abs_pos_max,
|
||||
abs_pos_min => abs_pos_min,
|
||||
offset => offset,
|
||||
ratio => ratio,
|
||||
abs_pos => abs_pos,
|
||||
fire => fire,
|
||||
fire_cnt => fire_cnt);
|
||||
|
||||
ratio <= ratio_to_fixed_point(div_ratio);
|
||||
offset <= offset_to_fixed_point(pixel_offset, div_ratio);
|
||||
abs_pos <= std_logic_vector(to_signed(pos,32));
|
||||
|
||||
-----------------------------------------------------------------------------
|
||||
-- Signal Monitor
|
||||
-----------------------------------------------------------------------------
|
||||
|
||||
pMONITOR : process(clk)
|
||||
alias ideal_fire_int is <<signal iUUT.ideal_fire : std_logic_vector(49 downto 0)>>;
|
||||
alias firing_error_int is <<signal iUUT.firing_error : std_logic_vector(49 downto 0)>>;
|
||||
begin
|
||||
if(clk = '1' and clk'event) then
|
||||
ideal_fire <= real(to_integer(unsigned(ideal_fire_int(49 downto 24)))) + (real(to_integer(unsigned(ideal_fire_int(23 downto 0)))) / real(2.0**24));
|
||||
firing_error <= real(to_integer(unsigned(firing_error_int(49 downto 24)))) + (real(to_integer(unsigned(firing_error_int(23 downto 0)))) / real(2.0**24));
|
||||
end if;
|
||||
end process pMONITOR;
|
||||
|
||||
-----------------------------------------------------------------------------
|
||||
-- Support Logic
|
||||
-----------------------------------------------------------------------------
|
||||
|
||||
pSupport : process(clk)
|
||||
begin
|
||||
if(clk = '1' and clk'event) then
|
||||
if(enable = '0') then
|
||||
tot_fire_num <= 0;
|
||||
elsif(fire = '1') then
|
||||
tot_fire_num <= tot_fire_num +1;
|
||||
end if;
|
||||
end if;
|
||||
end process pSupport;
|
||||
|
||||
-----------------------------------------------------------------------------
|
||||
-- Testbench Logic
|
||||
-----------------------------------------------------------------------------
|
||||
|
||||
pTB_CTRL : process
|
||||
variable delta_pos : integer := 0;
|
||||
variable init_pos : integer;
|
||||
variable dir_m : integer;
|
||||
variable tot_steps : integer;
|
||||
variable result : boolean;
|
||||
variable test_idx : natural;
|
||||
variable rv : RandomPType;
|
||||
|
||||
procedure run_test is
|
||||
variable steps : integer;
|
||||
variable sel_dir : integer;
|
||||
begin
|
||||
log_header("Test-case " & to_string(test_idx), VMEDIUM);
|
||||
wait_latency(clk, 1);
|
||||
if dir = '0' then
|
||||
dir_m := 1;
|
||||
else
|
||||
dir_m := -1;
|
||||
end if;
|
||||
init_pos := pos;
|
||||
-- reset the absolute position memory
|
||||
enable <= '0';
|
||||
upd_max_pos <= '0';
|
||||
upd_min_pos <= '0';
|
||||
wait_latency(clk, 1);
|
||||
upd_max_pos <= '1';
|
||||
upd_min_pos <= '1';
|
||||
wait_latency(clk, 1);
|
||||
upd_max_pos <= '0';
|
||||
upd_min_pos <= '0';
|
||||
-- restart the divider
|
||||
wait_latency(clk, 1);
|
||||
enable <= '1';
|
||||
wait_latency(clk, INTRA_POS_LATENCY);
|
||||
-- run the steps
|
||||
steps := 0;
|
||||
loop_pos: while steps < tot_steps loop
|
||||
wait_latency(clk, INTRA_POS_LATENCY);
|
||||
/*
|
||||
-- check the result and report
|
||||
delta_pos := dir_m * (pos - init_pos);
|
||||
result := check_result(div_ratio, pixel_offset, delta_pos, tot_fire_num, true);
|
||||
exit loop_pos when result = false;
|
||||
*/
|
||||
sel_dir := rv.RandInt(1, 100);
|
||||
if(sel_dir > POS_RANDOM_PERC) then
|
||||
-- move in the intended direction
|
||||
pos <= pos + dir_m;
|
||||
steps := steps + 1;
|
||||
else
|
||||
-- move in the opposite direction
|
||||
pos <= pos - dir_m;
|
||||
steps := steps - 1;
|
||||
end if;
|
||||
end loop loop_pos;
|
||||
-- wait the propagation of the latency
|
||||
wait_latency(clk, INTRA_POS_LATENCY);
|
||||
-- check the result and report
|
||||
delta_pos := dir_m * (pos - init_pos);
|
||||
if(result /= false) then
|
||||
result := check_result(div_ratio, pixel_offset, delta_pos, tot_fire_num);
|
||||
end if;
|
||||
|
||||
log("div_ratio = " & to_string(div_ratio), VMEDIUM);
|
||||
|
||||
end procedure run_test;
|
||||
|
||||
begin
|
||||
|
||||
-- Set the verbosity level for logging
|
||||
set_log_verbosity(VERBOSITY_LEVEL);
|
||||
--set_log_verbosity(VHIGH);
|
||||
|
||||
log_header("Fractional Divider verification:", VLOW);
|
||||
|
||||
test_completed <= false;
|
||||
configuring <= false;
|
||||
running <= false;
|
||||
passed <= false;
|
||||
failed <= false;
|
||||
|
||||
enable <= '0';
|
||||
dir <= '1';
|
||||
|
||||
-- Reset
|
||||
reset_n <= '0';
|
||||
wait for 100 ns;
|
||||
wait until clk = '1' and clk'event;
|
||||
reset_n <= '1';
|
||||
|
||||
result := true;
|
||||
|
||||
test_idx := 0;
|
||||
|
||||
---------------------------------------------------------------------------
|
||||
-- Test-00
|
||||
---------------------------------------------------------------------------
|
||||
if(result /= false) then
|
||||
test_idx := test_idx+1;
|
||||
div_ratio <= 4.000;
|
||||
pixel_offset <= 0.0;
|
||||
dir <= '0';
|
||||
tot_steps := 100000;
|
||||
run_test;
|
||||
end if;
|
||||
|
||||
--wait for 5 us;
|
||||
--test_completed <= true;
|
||||
|
||||
---------------------------------------------------------------------------
|
||||
-- Test-01
|
||||
---------------------------------------------------------------------------
|
||||
if(result /= false) then
|
||||
test_idx := test_idx+1;
|
||||
div_ratio <= 4.000;
|
||||
pixel_offset <= 0.25;
|
||||
dir <= '0';
|
||||
tot_steps := 100000;
|
||||
run_test;
|
||||
end if;
|
||||
|
||||
---------------------------------------------------------------------------
|
||||
-- Test-02
|
||||
---------------------------------------------------------------------------
|
||||
if(result /= false) then
|
||||
test_idx := test_idx+1;
|
||||
div_ratio <= 4.000;
|
||||
pixel_offset <= 0.5;
|
||||
dir <= '0';
|
||||
tot_steps := 100000;
|
||||
run_test;
|
||||
end if;
|
||||
|
||||
---------------------------------------------------------------------------
|
||||
-- Test-03
|
||||
---------------------------------------------------------------------------
|
||||
if(result /= false) then
|
||||
test_idx := test_idx+1;
|
||||
div_ratio <= 4.000;
|
||||
pixel_offset <= 0.75;
|
||||
dir <= '0';
|
||||
tot_steps := 100000;
|
||||
run_test;
|
||||
end if;
|
||||
|
||||
---------------------------------------------------------------------------
|
||||
-- Test-04
|
||||
---------------------------------------------------------------------------
|
||||
if(result /= false) then
|
||||
test_idx := test_idx+1;
|
||||
div_ratio <= 4.000;
|
||||
pixel_offset <= 1.0;
|
||||
dir <= '0';
|
||||
tot_steps := 100000;
|
||||
run_test;
|
||||
end if;
|
||||
|
||||
---------------------------------------------------------------------------
|
||||
-- Test-05
|
||||
---------------------------------------------------------------------------
|
||||
if(result /= false) then
|
||||
test_idx := test_idx+1;
|
||||
div_ratio <= 1.001;
|
||||
pixel_offset <= 0.0;
|
||||
dir <= '0';
|
||||
tot_steps := 10000;
|
||||
run_test;
|
||||
end if;
|
||||
|
||||
---------------------------------------------------------------------------
|
||||
-- Test-06
|
||||
---------------------------------------------------------------------------
|
||||
if(result /= false) then
|
||||
test_idx := test_idx+1;
|
||||
div_ratio <= 1.002;
|
||||
pixel_offset <= 0.9;
|
||||
dir <= '1';
|
||||
tot_steps := 10000;
|
||||
run_test;
|
||||
end if;
|
||||
|
||||
---------------------------------------------------------------------------
|
||||
-- Test-07
|
||||
---------------------------------------------------------------------------
|
||||
if(result /= false) then
|
||||
test_idx := test_idx+1;
|
||||
div_ratio <= 1.333;
|
||||
pixel_offset <= 1.5;
|
||||
dir <= '0';
|
||||
tot_steps := 10000;
|
||||
run_test;
|
||||
end if;
|
||||
|
||||
---------------------------------------------------------------------------
|
||||
-- Test-08
|
||||
---------------------------------------------------------------------------
|
||||
if(result /= false) then
|
||||
test_idx := test_idx+1;
|
||||
div_ratio <= 4.008;
|
||||
pixel_offset <= 0.25;
|
||||
dir <= '0';
|
||||
tot_steps := 10000;
|
||||
run_test;
|
||||
end if;
|
||||
|
||||
---------------------------------------------------------------------------
|
||||
-- Test-09
|
||||
---------------------------------------------------------------------------
|
||||
if(result /= false) then
|
||||
test_idx := test_idx+1;
|
||||
div_ratio <= 4.000;
|
||||
pixel_offset <= 0.0;
|
||||
dir <= '0';
|
||||
tot_steps := 10000;
|
||||
run_test;
|
||||
end if;
|
||||
|
||||
---------------------------------------------------------------------------
|
||||
-- Test-10
|
||||
---------------------------------------------------------------------------
|
||||
if(result /= false) then
|
||||
test_idx := test_idx+1;
|
||||
div_ratio <= 4.000;
|
||||
pixel_offset <= 0.25;
|
||||
dir <= '0';
|
||||
tot_steps := 10000;
|
||||
run_test;
|
||||
end if;
|
||||
|
||||
---------------------------------------------------------------------------
|
||||
-- Test-11
|
||||
---------------------------------------------------------------------------
|
||||
if(result /= false) then
|
||||
test_idx := test_idx+1;
|
||||
div_ratio <= 4.000;
|
||||
pixel_offset <= 0.5;
|
||||
dir <= '0';
|
||||
tot_steps := 10000;
|
||||
run_test;
|
||||
end if;
|
||||
|
||||
---------------------------------------------------------------------------
|
||||
-- Test-12
|
||||
---------------------------------------------------------------------------
|
||||
if(result /= false) then
|
||||
test_idx := test_idx+1;
|
||||
div_ratio <= 4.000;
|
||||
pixel_offset <= 0.75;
|
||||
dir <= '0';
|
||||
tot_steps := 10000;
|
||||
run_test;
|
||||
end if;
|
||||
|
||||
---------------------------------------------------------------------------
|
||||
-- Test-13
|
||||
---------------------------------------------------------------------------
|
||||
if(result /= false) then
|
||||
test_idx := test_idx+1;
|
||||
div_ratio <= 4.000;
|
||||
pixel_offset <= 1.0;
|
||||
dir <= '0';
|
||||
tot_steps := 10000;
|
||||
run_test;
|
||||
end if;
|
||||
|
||||
---------------------------------------------------------------------------
|
||||
-- Test-14
|
||||
---------------------------------------------------------------------------
|
||||
if(result /= false) then
|
||||
test_idx := test_idx+1;
|
||||
div_ratio <= 4.000;
|
||||
pixel_offset <= 0.12;
|
||||
dir <= '0';
|
||||
tot_steps := 10000;
|
||||
run_test;
|
||||
end if;
|
||||
|
||||
---------------------------------------------------------------------------
|
||||
-- Test-15
|
||||
---------------------------------------------------------------------------
|
||||
if(result /= false) then
|
||||
test_idx := test_idx+1;
|
||||
div_ratio <= 4.000;
|
||||
pixel_offset <= 0.13;
|
||||
dir <= '0';
|
||||
tot_steps := 10000;
|
||||
run_test;
|
||||
end if;
|
||||
|
||||
---------------------------------------------------------------------------
|
||||
-- Test-16
|
||||
---------------------------------------------------------------------------
|
||||
if(result /= false) then
|
||||
test_idx := test_idx+1;
|
||||
div_ratio <= 126.0;
|
||||
pixel_offset <= 0.99;
|
||||
dir <= '0';
|
||||
tot_steps := 10000;
|
||||
run_test;
|
||||
end if;
|
||||
|
||||
---------------------------------------------------------------------------
|
||||
-- Test-17
|
||||
---------------------------------------------------------------------------
|
||||
if(result /= false) then
|
||||
test_idx := test_idx+1;
|
||||
div_ratio <= 126.0;
|
||||
pixel_offset <= 0.0;
|
||||
dir <= '0';
|
||||
tot_steps := 10000;
|
||||
run_test;
|
||||
end if;
|
||||
|
||||
---------------------------------------------------------------------------
|
||||
-- Test-18 - Very long test to check internal-reg-saturation
|
||||
---------------------------------------------------------------------------
|
||||
if(result /= false) then
|
||||
test_idx := test_idx+1;
|
||||
div_ratio <= 4.000;
|
||||
pixel_offset <= 0.0;
|
||||
dir <= '0';
|
||||
tot_steps := 100000;
|
||||
run_test;
|
||||
end if;
|
||||
|
||||
---------------------------------------------------------------------------
|
||||
-- Test-19 - Very long test to check internal-reg-saturation
|
||||
---------------------------------------------------------------------------
|
||||
if(result /= false) then
|
||||
test_idx := test_idx+1;
|
||||
div_ratio <= 1000.000;
|
||||
pixel_offset <= 0.5;
|
||||
dir <= '0';
|
||||
tot_steps := 100000;
|
||||
run_test;
|
||||
end if;
|
||||
|
||||
---------------------------------------------------------------------------
|
||||
-- Test-20 - Very long test to check internal-reg-saturation
|
||||
---------------------------------------------------------------------------
|
||||
if(result /= false) then
|
||||
test_idx := test_idx+1;
|
||||
div_ratio <= 999.9;
|
||||
pixel_offset <= 0.5;
|
||||
dir <= '0';
|
||||
tot_steps := 100000;
|
||||
run_test;
|
||||
end if;
|
||||
|
||||
---------------------------------------------------------------------------
|
||||
-- Test-21 - Very long test to check internal-reg-saturation
|
||||
---------------------------------------------------------------------------
|
||||
if(result /= false) then
|
||||
test_idx := test_idx+1;
|
||||
div_ratio <= 999.8;
|
||||
pixel_offset <= 0.5;
|
||||
dir <= '0';
|
||||
tot_steps := 100000;
|
||||
run_test;
|
||||
end if;
|
||||
|
||||
---------------------------------------------------------------------------
|
||||
-- Test-22 - Very long test to check internal-reg-saturation
|
||||
---------------------------------------------------------------------------
|
||||
if(result /= false) then
|
||||
test_idx := test_idx+1;
|
||||
div_ratio <= 1001.0;
|
||||
pixel_offset <= 0.5;
|
||||
dir <= '0';
|
||||
tot_steps := 100000;
|
||||
run_test;
|
||||
end if;
|
||||
|
||||
---------------------------------------------------------------------------
|
||||
-- Test-23 - Very long test to check internal-reg-saturation
|
||||
---------------------------------------------------------------------------
|
||||
if(result /= false) then
|
||||
test_idx := test_idx+1;
|
||||
div_ratio <= 1000.1;
|
||||
pixel_offset <= 0.5;
|
||||
dir <= '0';
|
||||
tot_steps := 100000;
|
||||
run_test;
|
||||
end if;
|
||||
|
||||
---------------------------------------------------------------------------
|
||||
-- Test-23 - Very long test to check internal-reg-saturation
|
||||
---------------------------------------------------------------------------
|
||||
if(result /= false) then
|
||||
test_idx := test_idx+1;
|
||||
div_ratio <= 1000.2;
|
||||
pixel_offset <= 0.5;
|
||||
dir <= '0';
|
||||
tot_steps := 100000;
|
||||
run_test;
|
||||
end if;
|
||||
|
||||
---------------------------------------------------------------------------
|
||||
-- Random Tests
|
||||
---------------------------------------------------------------------------
|
||||
|
||||
for n in 1 to 20 loop
|
||||
if(result /= false) then
|
||||
test_idx := test_idx+1;
|
||||
-- the div_ratio fractional part must be a multiple of 0.001
|
||||
div_ratio <= 0.001*real(rv.RandInt(1000, 50000));
|
||||
if((rv.RandInt(1,10) mod 2) = 0) then
|
||||
dir <= '0';
|
||||
else
|
||||
dir <= '1';
|
||||
end if;
|
||||
tot_steps := rv.RandInt(5000, 20000);
|
||||
run_test;
|
||||
end if;
|
||||
end loop; -- n
|
||||
|
||||
wait for 200 ns;
|
||||
|
||||
log_separator_line(VLOW);
|
||||
if(result = false) then
|
||||
failed <= true;
|
||||
log("FAILURE: test completed with errors.", VLOW);
|
||||
else
|
||||
passed <= true;
|
||||
log("SUCCESS: test successfully completed.", VLOW);
|
||||
end if;
|
||||
log_separator_line(VLOW);
|
||||
|
||||
test_completed <= true;
|
||||
running <= false;
|
||||
|
||||
wait;
|
||||
|
||||
end process pTB_CTRL;
|
||||
|
||||
|
||||
end architecture behav;
|
||||
307
generic_ip/pulse_generator/3/src/test/spitting_verify_tb.vhd
Normal file
307
generic_ip/pulse_generator/3/src/test/spitting_verify_tb.vhd
Normal file
|
|
@ -0,0 +1,307 @@
|
|||
-------------------------------------------------------------------------------
|
||||
-- Title : spitting_verify_tb
|
||||
-- Project : Pulse-Generator
|
||||
-------------------------------------------------------------------------------
|
||||
-- File : spitting_verify_tb.vhd
|
||||
-- Author : GMG
|
||||
-- Company : Global Inkjet Systems
|
||||
-- Created : 2018-09-11
|
||||
-- Last update: 2019-05-22
|
||||
-- SVN ID : Git
|
||||
-- Standard : VHDL'2008
|
||||
-------------------------------------------------------------------------------
|
||||
-- Description:
|
||||
-- Verify the spitting logic in pulse-generator
|
||||
-------------------------------------------------------------------------------
|
||||
|
||||
library ieee;
|
||||
use ieee.std_logic_1164.all;
|
||||
use ieee.numeric_std.all;
|
||||
use ieee.math_real.all;
|
||||
|
||||
use work.log_pkg.all;
|
||||
use work.avalon_verify_pkg.all;
|
||||
|
||||
use work.pulse_generator_3_pkg.all;
|
||||
|
||||
entity spitting_verify_tb is
|
||||
-- ..
|
||||
end entity spitting_verify_tb;
|
||||
|
||||
architecture behav of spitting_verify_tb is
|
||||
|
||||
constant CLK_PERIOD : time := 10 ns;
|
||||
|
||||
-- Logging Verbosity Level
|
||||
constant VERBOSITY_LEVEL : verb_level_t := VMEDIUM;
|
||||
|
||||
-----------------------------------------------------------------------------
|
||||
-- TB Functions / Procedures
|
||||
-----------------------------------------------------------------------------
|
||||
|
||||
procedure wait_latency(
|
||||
signal clk : in std_logic;
|
||||
cycles : in natural) is
|
||||
begin
|
||||
for i in 1 to cycles loop
|
||||
wait until clk = '1' and clk'event;
|
||||
end loop; -- i
|
||||
end procedure wait_latency;
|
||||
|
||||
-----------------------------------------------------------------------------
|
||||
-- Signal declarations
|
||||
-----------------------------------------------------------------------------
|
||||
|
||||
signal reset_n : std_logic := '0';
|
||||
signal clk : std_logic := '0';
|
||||
signal init : std_logic;
|
||||
signal pd_in : std_logic;
|
||||
signal abs_position : std_logic_vector(31 downto 0);
|
||||
signal dp_dir : std_logic;
|
||||
signal pulse_out : std_logic;
|
||||
signal filtered_pd : std_logic;
|
||||
signal ch_pd : std_logic;
|
||||
signal ch_mask : std_logic;
|
||||
signal raw_pulse_out : std_logic;
|
||||
signal avs_address : std_logic_vector(9 downto 0);
|
||||
signal avs_write : std_logic;
|
||||
signal avs_writedata : std_logic_vector(31 downto 0);
|
||||
signal avs_read : std_logic;
|
||||
signal avs_readdatavalid : std_logic;
|
||||
signal avs_readdata : std_logic_vector(31 downto 0);
|
||||
--
|
||||
signal avs_m : mm_m_rec_t;
|
||||
signal avs_s : mm_s_rec_t;
|
||||
--
|
||||
signal pd_in_cnt : integer;
|
||||
signal pd_out_cnt : integer;
|
||||
--
|
||||
signal test_completed : boolean;
|
||||
signal setup : boolean;
|
||||
signal running : boolean;
|
||||
signal error_flag : boolean;
|
||||
signal passed : boolean;
|
||||
signal failed : boolean;
|
||||
|
||||
begin -- architecture behav
|
||||
|
||||
clk <= not clk after 0.5*CLK_PERIOD;
|
||||
|
||||
-----------------------------------------------------------------------------
|
||||
-- UUT
|
||||
-----------------------------------------------------------------------------
|
||||
|
||||
iUUT: entity work.pulse_generator_3
|
||||
generic map (
|
||||
pulse_delay_equal_en => true,
|
||||
out_pulse_condition => true)
|
||||
port map (
|
||||
clk => clk,
|
||||
reset_n => reset_n,
|
||||
init => init,
|
||||
pd_in => pd_in,
|
||||
abs_position => abs_position,
|
||||
dp_dir => dp_dir,
|
||||
pulse_out => pulse_out,
|
||||
filtered_pd => filtered_pd,
|
||||
ch_pd => ch_pd,
|
||||
ch_mask => ch_mask,
|
||||
raw_pulse_out => raw_pulse_out,
|
||||
avs_address => avs_address,
|
||||
avs_write => avs_write,
|
||||
avs_writedata => avs_writedata,
|
||||
avs_read => avs_read,
|
||||
avs_readdatavalid => avs_readdatavalid,
|
||||
avs_readdata => avs_readdata);
|
||||
|
||||
-----------------------------------------------------------------------------
|
||||
-- Avalon interface
|
||||
-----------------------------------------------------------------------------
|
||||
|
||||
clk_clk <= clk;
|
||||
reset_reset_n <= reset_n;
|
||||
|
||||
avs_s.mm_readdata <= avs_readdata;
|
||||
|
||||
avs_s.mm_readdatavalid <= avs_readdatavalid;
|
||||
|
||||
avs_s.mm_waitrequest <= '0';
|
||||
avs_s.use_readvalid <= true;
|
||||
|
||||
avs_address <= avs_m.mm_address(avs_address'range);
|
||||
avs_write <= avs_m.mm_write;
|
||||
avs_writedata <= avs_m.mm_writedata;
|
||||
avs_read <= avs_m.mm_read;
|
||||
|
||||
pCNT_CH_PD : process(reset_n, clk)
|
||||
begin
|
||||
if(reset_n = '0') then
|
||||
pd_out_cnt <= 0;
|
||||
elsif(clk = '1' and clk'event) then
|
||||
if(ch_pd = '1') then
|
||||
pd_out_cnt <= pd_out_cnt + 1;
|
||||
end if;
|
||||
end if;
|
||||
end process pCNT_CH_PD;
|
||||
|
||||
-----------------------------------------------------------------------------
|
||||
-- Testbench Logic
|
||||
-----------------------------------------------------------------------------
|
||||
|
||||
pTB_CTRL : process
|
||||
|
||||
alias dp_dir is <<signal iUUT.dp_dir_i : std_logic>>;
|
||||
|
||||
procedure issue_pd(valid_pd : boolean := true) is
|
||||
begin
|
||||
|
||||
wait until clk = '1' and clk'event;
|
||||
pd_in <= '1';
|
||||
wait until clk = '1' and clk'event;
|
||||
pd_in <= '0';
|
||||
if(valid_pd = true) then
|
||||
pd_in_cnt <= pd_in_cnt + 1;
|
||||
end if;
|
||||
|
||||
end procedure issue_pd;
|
||||
|
||||
procedure check_pd is
|
||||
begin
|
||||
for i in 1 to 12 loop
|
||||
wait until clk = '1' and clk'event;
|
||||
end loop; -- i
|
||||
if(pd_out_cnt /= pd_in_cnt) then
|
||||
if(pd_out_cnt > pd_in_cnt) then
|
||||
log("ERROR: Detected faulty Channel PD.", VLOW);
|
||||
else
|
||||
log("ERROR: Missing Channel PD.", VLOW);
|
||||
end if;
|
||||
error_flag <= true;
|
||||
end if;
|
||||
|
||||
end procedure check_pd;
|
||||
|
||||
variable addr : std_logic_vector(31 downto 0) := (others => '0');
|
||||
variable data : std_logic_vector(31 downto 0) := (others => '0');
|
||||
|
||||
begin
|
||||
|
||||
-- Set the verbosity level for logging
|
||||
set_log_verbosity(VERBOSITY_LEVEL);
|
||||
--set_log_verbosity(VHIGH);
|
||||
|
||||
-- initilialize the Avalon master-bus
|
||||
mm_m_init(avs_m);
|
||||
|
||||
log_header("PD Jitter verification:", VLOW);
|
||||
|
||||
setup <= false;
|
||||
running <= false;
|
||||
passed <= false;
|
||||
error_flag <= false;
|
||||
|
||||
init <= '0';
|
||||
pd_in <= '0';
|
||||
pd_in_cnt <= 0;
|
||||
abs_position <= (others => '0');
|
||||
|
||||
-- Reset
|
||||
reset_n <= '0';
|
||||
wait for 100 ns;
|
||||
wait until clk = '1' and clk'event;
|
||||
reset_n <= '1';
|
||||
|
||||
wait for 200 ns;
|
||||
-- enable the pulse generator
|
||||
addr := std_logic_vector(resize(unsigned(PULSE_GEN_CTRL_REG), 32));
|
||||
data := X"0000_0001";
|
||||
mm_32b_write(addr, data, avs_s, avs_m);
|
||||
|
||||
---------------------------------------------------------------------------
|
||||
-- DP-DIR = '0'
|
||||
---------------------------------------------------------------------------
|
||||
|
||||
log("DP-DIR = '0'", VLOW);
|
||||
log_separator_line(VLOW);
|
||||
|
||||
|
||||
dp_dir <= force '0';
|
||||
|
||||
wait for 200 ns;
|
||||
wait until clk = '1' and clk'event;
|
||||
init <= '1';
|
||||
wait until clk = '1' and clk'event;
|
||||
wait until clk = '1' and clk'event;
|
||||
wait until clk = '1' and clk'event;
|
||||
init <= '0';
|
||||
wait for 200 ns;
|
||||
wait until clk = '1' and clk'event;
|
||||
|
||||
---------------------------------------------------------------------------
|
||||
-- DIR-0, Init Pos = 0
|
||||
---------------------------------------------------------------------------
|
||||
|
||||
log("Issueing PD on ABS_POS = 0", VLOW);
|
||||
|
||||
for n in 0 to 9 loop
|
||||
issue_pd;
|
||||
check_pd;
|
||||
wait_latency(clk, 10);
|
||||
abs_position <= std_logic_vector(signed(abs_position)+ 1);
|
||||
end loop; -- n
|
||||
|
||||
log("Go back to ABS_POS = 0", VLOW);
|
||||
for n in 0 to 9 loop
|
||||
wait_latency(clk, 10);
|
||||
abs_position <= std_logic_vector(signed(abs_position)- 1);
|
||||
end loop; -- n
|
||||
|
||||
log("Issueing again PD on ABS_POS = 0", VLOW);
|
||||
for n in 0 to 9 loop
|
||||
issue_pd(false);
|
||||
check_pd;
|
||||
wait_latency(clk, 10);
|
||||
abs_position <= std_logic_vector(signed(abs_position)+ 1);
|
||||
end loop; -- n
|
||||
|
||||
for n in 0 to 9 loop
|
||||
issue_pd;
|
||||
check_pd;
|
||||
wait_latency(clk, 10);
|
||||
abs_position <= std_logic_vector(signed(abs_position)+ 1);
|
||||
end loop; -- n
|
||||
|
||||
wait for 1 us;
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
wait for 20 us;
|
||||
|
||||
running <= false;
|
||||
passed <= true after 100 ns;
|
||||
wait;
|
||||
|
||||
end process pTB_CTRL;
|
||||
|
||||
failed <= error_flag after 100 ns;
|
||||
|
||||
pREPORT_RESULT : process
|
||||
begin
|
||||
wait until failed = true or passed = true;
|
||||
wait for 1 us;
|
||||
log_separator_line(VLOW);
|
||||
if(failed = true) then
|
||||
log("FAILURE: test completed with errors.", VLOW);
|
||||
elsif(passed = true) then
|
||||
log("SUCCESS: test successfully completed.", VLOW);
|
||||
end if;
|
||||
log_separator_line(VLOW);
|
||||
test_completed <= true;
|
||||
end process pREPORT_RESULT;
|
||||
|
||||
|
||||
end architecture behav;
|
||||
512
generic_ip/pulse_generator/3/src/test/tof_comp/tof_table_1.cfg
Normal file
512
generic_ip/pulse_generator/3/src/test/tof_comp/tof_table_1.cfg
Normal file
|
|
@ -0,0 +1,512 @@
|
|||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000009
|
||||
0000000A
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000013
|
||||
00000014
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
0000001D
|
||||
0000001E
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000027
|
||||
00000028
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000031
|
||||
00000032
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
0000003C
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000014
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
00000064
|
||||
662
generic_ip/pulse_generator/3/src/test/tof_comp_tb.vhd
Normal file
662
generic_ip/pulse_generator/3/src/test/tof_comp_tb.vhd
Normal file
|
|
@ -0,0 +1,662 @@
|
|||
-------------------------------------------------------------------------------
|
||||
-- Title : tof_comp_tb
|
||||
-- Project : Pulse-Generator
|
||||
-------------------------------------------------------------------------------
|
||||
-- File : tof_comp_tb.vhd
|
||||
-- Author : GMG
|
||||
-- Company : Global Inkjet Systems
|
||||
-- Created : 2019-06-20
|
||||
-- Last update: 2020-04-15
|
||||
-- SVN ID : Git
|
||||
-- Standard : VHDL'2008
|
||||
-------------------------------------------------------------------------------
|
||||
-- Description:
|
||||
-- Verifies Time-of-Flight Compensation
|
||||
-------------------------------------------------------------------------------
|
||||
|
||||
library std;
|
||||
use std.textio.all;
|
||||
|
||||
library ieee;
|
||||
use ieee.std_logic_1164.all;
|
||||
use ieee.numeric_std.all;
|
||||
use ieee.std_logic_textio.all;
|
||||
use ieee.math_real.all;
|
||||
|
||||
use work.log_pkg.all;
|
||||
use work.avalon_verify_pkg.all;
|
||||
|
||||
use work.pulse_generator_3_pkg.all;
|
||||
|
||||
entity tof_comp_tb is
|
||||
-- ..
|
||||
end entity tof_comp_tb;
|
||||
|
||||
architecture behav of tof_comp_tb is
|
||||
|
||||
constant CLK_PERIOD : time := 10 ns;
|
||||
|
||||
-- Logging Verbosity Level
|
||||
constant VERBOSITY_LEVEL : verb_level_t := VMEDIUM;
|
||||
|
||||
constant SIM_CYCLES : natural := 15;
|
||||
|
||||
-- DIV_RATIO: head-pitch/ encoder-global-resolution
|
||||
constant DIV_RATIO : real := 1.0;
|
||||
|
||||
constant SAMPLING_PERIOD : natural := 1000; -- Use a sample period of 10 us
|
||||
-- for the test
|
||||
|
||||
type cfg_data_t is array (natural range <>) of std_logic_vector(31 downto 0);
|
||||
|
||||
constant TOF_COMP_TABLE_LEN : natural := 512;
|
||||
|
||||
subtype tof_table_t is cfg_data_t(0 to TOF_COMP_TABLE_LEN-1);
|
||||
|
||||
constant tof_comp_file : string := "./../src/test/tof_comp/tof_table_1.cfg";
|
||||
|
||||
-----------------------------------------------------------------------------
|
||||
-- Signal declarations
|
||||
-----------------------------------------------------------------------------
|
||||
|
||||
signal reset_n : std_logic := '0';
|
||||
signal clk : std_logic := '0';
|
||||
signal init : std_logic;
|
||||
signal pd_in : std_logic;
|
||||
signal abs_position : std_logic_vector(31 downto 0);
|
||||
signal dp_dir : std_logic;
|
||||
signal fire_req : std_logic;
|
||||
signal fire_req_vec : std_logic_vector(31 downto 0);
|
||||
signal filtered_pd : std_logic;
|
||||
signal ch_pd : std_logic;
|
||||
signal ch_mask : std_logic;
|
||||
signal raw_fire_req : std_logic;
|
||||
signal avs_address : std_logic_vector(10 downto 0);
|
||||
signal avs_write : std_logic;
|
||||
signal avs_writedata : std_logic_vector(31 downto 0);
|
||||
signal avs_read : std_logic;
|
||||
signal avs_readdatavalid : std_logic;
|
||||
signal avs_readdata : std_logic_vector(31 downto 0);
|
||||
--
|
||||
signal avs_m : mm_m_rec_t;
|
||||
signal avs_s : mm_s_rec_t;
|
||||
--
|
||||
signal step_pos : std_logic;
|
||||
signal step_neg : std_logic;
|
||||
signal vel_meas : std_logic_vector(19 downto 0);
|
||||
signal vel_sampling_per : std_logic_vector(19 downto 0);
|
||||
--
|
||||
signal end_of_stimuli : boolean;
|
||||
signal test_completed : boolean;
|
||||
signal setup : boolean;
|
||||
signal running : boolean;
|
||||
signal passed : boolean;
|
||||
signal failed : boolean;
|
||||
|
||||
shared variable error_flag : boolean;
|
||||
|
||||
signal vel_meas_cnt : natural;
|
||||
signal vel_upd_flag : std_logic;
|
||||
--
|
||||
signal fire_req_d : std_logic;
|
||||
signal raw_fire_req_d : std_logic;
|
||||
signal fire_cnt : integer;
|
||||
signal raw_fire_cnt : integer;
|
||||
|
||||
|
||||
-----------------------------------------------------------------------------
|
||||
-- TB Functions / Procedures
|
||||
-----------------------------------------------------------------------------
|
||||
|
||||
procedure wait_latency(
|
||||
signal clk : in std_logic;
|
||||
cycles : in natural) is
|
||||
begin
|
||||
for i in 1 to cycles loop
|
||||
wait until clk = '1' and clk'event;
|
||||
end loop; -- i
|
||||
end procedure wait_latency;
|
||||
|
||||
procedure set_div_ratio(
|
||||
div_ratio : real;
|
||||
signal mm_s_rec : in mm_s_rec_t;
|
||||
signal mm_m_rec : out mm_m_rec_t) is
|
||||
|
||||
variable addr : std_logic_vector(31 downto 0) := (others => '0');
|
||||
variable data : std_logic_vector(31 downto 0) := (others => '0');
|
||||
|
||||
variable ratio_int : integer;
|
||||
variable ratio_slv : std_logic_vector(33 downto 0);
|
||||
|
||||
begin
|
||||
|
||||
-- set the division ratio
|
||||
ratio_int := integer(div_ratio*real(2**24));
|
||||
ratio_slv := std_logic_vector(to_unsigned(ratio_int, 34));
|
||||
-- Set the integer part of the div-ratio
|
||||
data(31 downto 10) := (others => '0');
|
||||
data( 9 downto 0) := ratio_slv(33 downto 24);
|
||||
addr := std_logic_vector(resize(unsigned(DIV_RATIO_INT), 32));
|
||||
mm_32b_write(addr, data, mm_s_rec, mm_m_rec);
|
||||
-- Set the fractional part of the div-ratio
|
||||
data(31 downto 24) := (others => '0');
|
||||
data(23 downto 0) := ratio_slv(23 downto 0);
|
||||
addr := std_logic_vector(resize(unsigned(DIV_RATIO_FRAC), 32));
|
||||
mm_32b_write(addr, data, mm_s_rec, mm_m_rec);
|
||||
|
||||
end procedure set_div_ratio;
|
||||
|
||||
procedure read_cfg_file(
|
||||
fname : in string;
|
||||
num_data : in natural;
|
||||
read_data : out cfg_data_t) is
|
||||
|
||||
file f_id : text;
|
||||
variable status : file_open_status;
|
||||
variable InLine : line;
|
||||
variable word : std_logic_vector(31 downto 0);
|
||||
|
||||
begin
|
||||
|
||||
file_open(status, f_id, fname, read_mode);
|
||||
if(status /= open_ok) then
|
||||
log("ERROR: Failed to open file " & fname & ".", VLOW);
|
||||
error_flag := true;
|
||||
else
|
||||
|
||||
READ_LOOP: for idx in 0 to num_data-1 loop
|
||||
|
||||
readline(f_id, InLine);
|
||||
hread(InLine, word);
|
||||
read_data(idx) := word;
|
||||
|
||||
end loop; -- READ_LOOP
|
||||
|
||||
file_close(f_id);
|
||||
|
||||
end if;
|
||||
|
||||
end procedure read_cfg_file;
|
||||
|
||||
procedure config_tof_comp_lut(
|
||||
tof_table : in tof_table_t;
|
||||
signal mm_s_rec : in mm_s_rec_t;
|
||||
signal mm_m_rec : out mm_m_rec_t) is
|
||||
|
||||
variable addr : std_logic_vector(31 downto 0) := (others => '0');
|
||||
variable data : std_logic_vector(31 downto 0) := (others => '0');
|
||||
|
||||
begin
|
||||
|
||||
for n in 0 to TOF_COMP_TABLE_LEN-1 loop
|
||||
data := tof_table(n);
|
||||
addr := std_logic_vector(resize(unsigned(TOF_COMP_LUT_OFFSET)+n, 32));
|
||||
mm_32b_write(addr, data, mm_s_rec, mm_m_rec);
|
||||
end loop; -- n
|
||||
|
||||
log("ToF Compensation LUT configured.", VMEDIUM);
|
||||
|
||||
end procedure config_tof_comp_lut;
|
||||
|
||||
procedure setup_tof_comp(
|
||||
enc_speed_norm : natural;
|
||||
vel_sampl_win : natural := SAMPLING_PERIOD;
|
||||
signal mm_s_rec : in mm_s_rec_t;
|
||||
signal mm_m_rec : out mm_m_rec_t) is
|
||||
|
||||
variable addr : std_logic_vector(31 downto 0) := (others => '0');
|
||||
variable data : std_logic_vector(31 downto 0) := (others => '0');
|
||||
|
||||
begin
|
||||
|
||||
addr := std_logic_vector(resize(unsigned(ENC_SPEED_MEAS_W_REG), 32));
|
||||
data := std_logic_vector(to_unsigned(vel_sampl_win, 32));
|
||||
mm_32b_write(addr, data, mm_s_rec, mm_m_rec);
|
||||
|
||||
addr := std_logic_vector(resize(unsigned(TOF_COMPENSATION_REG), 32));
|
||||
data := x"0000" & std_logic_vector(to_unsigned(enc_speed_norm,16));
|
||||
mm_32b_write(addr, data, mm_s_rec, mm_m_rec);
|
||||
|
||||
end procedure setup_tof_comp;
|
||||
|
||||
procedure apply_pg_cfg(
|
||||
div_ratio : real;
|
||||
offset_dir0 : integer;
|
||||
offset_dir1 : integer;
|
||||
delay : integer;
|
||||
dir : std_logic;
|
||||
tof_enable : std_logic;
|
||||
enc_speed_norm : natural;
|
||||
signal mm_s_rec : in mm_s_rec_t;
|
||||
signal mm_m_rec : out mm_m_rec_t) is
|
||||
|
||||
variable addr : std_logic_vector(31 downto 0) := (others => '0');
|
||||
variable data : std_logic_vector(31 downto 0) := (others => '0');
|
||||
|
||||
variable ratio_int : integer;
|
||||
variable ratio_slv : std_logic_vector(33 downto 0);
|
||||
|
||||
variable tof_table : tof_table_t;
|
||||
|
||||
begin
|
||||
|
||||
log_separator_line(VMEDIUM);
|
||||
log("Configuring Pulse-Generator registers ...", VMEDIUM);
|
||||
log_separator_line(VMEDIUM);
|
||||
|
||||
log("Div-Ratio = " & to_string(div_ratio), VMEDIUM);
|
||||
|
||||
-- Disable/Re-enable first the whole pulse_generator
|
||||
addr := std_logic_vector(resize(unsigned(PULSE_GEN_CTRL_REG), 32));
|
||||
data := (others => '0');
|
||||
mm_32b_write(addr, data, mm_s_rec, mm_m_rec);
|
||||
data := (0 => '1', 16 => '1', others => '0');
|
||||
mm_32b_write(addr, data, mm_s_rec, mm_m_rec);
|
||||
|
||||
-- Disable the Channel Controller sequencer
|
||||
addr := std_logic_vector(resize(unsigned(CH_CTRL_CTRL_REG), 32));
|
||||
data := (others => '0');
|
||||
mm_32b_write(addr, data, mm_s_rec, mm_m_rec);
|
||||
|
||||
-- Set the division ratio
|
||||
set_div_ratio(div_ratio, mm_s_rec, mm_m_rec);
|
||||
|
||||
-- Disable/Enable the fractional divider
|
||||
addr := std_logic_vector(resize(unsigned(FRAC_DIV_CTRL_REG), 32));
|
||||
data := (others => '0');
|
||||
mm_32b_write(addr, data, mm_s_rec, mm_m_rec);
|
||||
data := (0 => '1', others => '0');
|
||||
mm_32b_write(addr, data, mm_s_rec, mm_m_rec);
|
||||
|
||||
-- Configure the rest of the pulse_generator:
|
||||
-- Configure the Channel Offset (Both DIR_0 and DIR_1):
|
||||
-- DIR_0
|
||||
addr := std_logic_vector(resize(unsigned(CH_OFFSET_D0_REG),32));
|
||||
data := std_logic_vector(to_unsigned(offset_dir0, 32));
|
||||
mm_32b_write(addr, data, mm_s_rec, mm_m_rec);
|
||||
-- DIR_1
|
||||
addr := std_logic_vector(resize(unsigned(CH_OFFSET_D1_REG), 32));
|
||||
data := std_logic_vector(to_unsigned(offset_dir1, 32));
|
||||
mm_32b_write(addr, data, mm_s_rec, mm_m_rec);
|
||||
-- Configure the Channel Delay:
|
||||
addr := std_logic_vector(resize(unsigned(CH_DELAY_REG), 32));
|
||||
data := std_logic_vector(to_unsigned(delay, 32));
|
||||
mm_32b_write(addr, data, mm_s_rec, mm_m_rec);
|
||||
|
||||
-- Read the tof configuration file
|
||||
read_cfg_file(tof_comp_file, TOF_COMP_TABLE_LEN, tof_table);
|
||||
-- upload the table
|
||||
config_tof_comp_lut(tof_table, mm_s_rec, mm_m_rec);
|
||||
|
||||
-- apply tof compensation
|
||||
setup_tof_comp(enc_speed_norm, SAMPLING_PERIOD, mm_s_rec, mm_m_rec);
|
||||
|
||||
-- enable the pulse-generator: bypass_ch_ctrl = '1',
|
||||
addr := std_logic_vector(resize(unsigned(PULSE_GEN_CTRL_REG), 32));
|
||||
data := (0 => '1', 1 => '1', 4 => dir, 12 => tof_enable, 16 => '1', others => '0');
|
||||
mm_32b_write(addr, data, mm_s_rec, mm_m_rec);
|
||||
|
||||
if(tof_enable = '0') then
|
||||
log("ToF Compensation Disabled.", VMEDIUM);
|
||||
else
|
||||
log("ToF Compensation Enabled.", VMEDIUM);
|
||||
end if;
|
||||
|
||||
if(dir = '0') then
|
||||
log("Ch-Ctrl disabled, direction = DIR-0", VMEDIUM);
|
||||
else
|
||||
log("Ch-Ctrl disabled, direction = DIR-1", VMEDIUM);
|
||||
end if;
|
||||
|
||||
log_separator_line(VMEDIUM);
|
||||
|
||||
end procedure apply_pg_cfg;
|
||||
|
||||
-----------------------------------------------------------------------------
|
||||
-- End declarative part
|
||||
-----------------------------------------------------------------------------
|
||||
|
||||
begin -- architecture behav
|
||||
|
||||
clk <= not clk after 0.5*CLK_PERIOD;
|
||||
|
||||
-----------------------------------------------------------------------------
|
||||
-- UUT
|
||||
-----------------------------------------------------------------------------
|
||||
|
||||
iUUT: entity work.pulse_generator_3
|
||||
generic map (
|
||||
PULSE_DELAY_EQUAL_EN => true,
|
||||
TOF_COMP_EN => true)
|
||||
port map (
|
||||
clk => clk,
|
||||
reset_n => reset_n,
|
||||
init => init,
|
||||
pd_in => pd_in,
|
||||
abs_position => abs_position,
|
||||
enc_vel => vel_meas,
|
||||
enc_speed_meas_w => vel_sampling_per,
|
||||
dp_dir => dp_dir,
|
||||
fire_req_vec => fire_req_vec,
|
||||
filtered_pd => filtered_pd,
|
||||
ch_pd => ch_pd,
|
||||
ch_mask => ch_mask,
|
||||
raw_fire_req => raw_fire_req,
|
||||
avs_address => avs_address,
|
||||
avs_write => avs_write,
|
||||
avs_writedata => avs_writedata,
|
||||
avs_read => avs_read,
|
||||
avs_readdatavalid => avs_readdatavalid,
|
||||
avs_readdata => avs_readdata);
|
||||
|
||||
fire_req <= fire_req_vec(0);
|
||||
|
||||
iVEL : entity work.simple_enc_vel_detect
|
||||
port map (
|
||||
clk => clk,
|
||||
init => init,
|
||||
step_pos => step_pos,
|
||||
step_neg => step_neg,
|
||||
sampling_period => vel_sampling_per,
|
||||
vel_meas => vel_meas);
|
||||
|
||||
-----------------------------------------------------------------------------
|
||||
-- Avalon interface
|
||||
-----------------------------------------------------------------------------
|
||||
|
||||
clk_clk <= clk;
|
||||
reset_reset_n <= reset_n;
|
||||
|
||||
avs_s.mm_readdata <= avs_readdata;
|
||||
|
||||
avs_s.mm_readdatavalid <= avs_readdatavalid;
|
||||
|
||||
avs_s.mm_waitrequest <= '0';
|
||||
avs_s.use_readvalid <= true;
|
||||
|
||||
avs_address <= avs_m.mm_address(avs_address'range);
|
||||
avs_write <= avs_m.mm_write;
|
||||
avs_writedata <= avs_m.mm_writedata;
|
||||
avs_read <= avs_m.mm_read;
|
||||
|
||||
-----------------------------------------------------------------------------
|
||||
-- Testbench Logic
|
||||
-----------------------------------------------------------------------------
|
||||
|
||||
pVEL_MEAS_CNT : process(clk)
|
||||
alias new_meas is <<signal iVEL.sampling_pulse : std_logic>>;
|
||||
begin
|
||||
if(clk = '1' and clk'event) then
|
||||
vel_upd_flag <= new_meas;
|
||||
if(init = '1') then
|
||||
vel_meas_cnt <= 0;
|
||||
elsif(new_meas = '1') then
|
||||
vel_meas_cnt <= vel_meas_cnt + 1;
|
||||
end if;
|
||||
end if;
|
||||
end process pVEL_MEAS_CNT;
|
||||
|
||||
pSTIMULI : process
|
||||
|
||||
-- increments the abs pos every period clock cycles, first the specified
|
||||
-- number of positive steps, then negative steps, then repeat until the
|
||||
-- timing window is finished
|
||||
procedure gen_abs_pos(
|
||||
pos_inc_num : in natural;
|
||||
neg_inc_num : in natural;
|
||||
period : in natural;
|
||||
signal step_pos : out std_logic;
|
||||
signal step_neg : out std_logic;
|
||||
signal abs_position : out std_logic_vector(31 downto 0)) is
|
||||
|
||||
variable curr_vel_cnt : natural := vel_meas_cnt;
|
||||
variable pos_cnt : natural;
|
||||
variable neg_cnt : natural;
|
||||
variable go_on : boolean;
|
||||
|
||||
begin
|
||||
|
||||
wait until clk = '1' and clk'event;
|
||||
|
||||
pos_cnt := 0;
|
||||
neg_cnt := 0;
|
||||
|
||||
go_on := true;
|
||||
while go_on = true loop
|
||||
|
||||
-- generate first positive steps
|
||||
if(pos_cnt < pos_inc_num) then
|
||||
abs_position <= std_logic_vector(signed(abs_position)+1);
|
||||
step_pos <= '1';
|
||||
pos_cnt := pos_cnt+1;
|
||||
wait until clk = '1' and clk'event;
|
||||
step_pos <= '0';
|
||||
wait_latency(clk, period-1);
|
||||
end if;
|
||||
|
||||
-- then generate negative steps
|
||||
if(neg_cnt < neg_inc_num) then
|
||||
abs_position <= std_logic_vector(signed(abs_position)-1);
|
||||
step_neg <= '1';
|
||||
neg_cnt := neg_cnt+1;
|
||||
wait until clk = '1' and clk'event;
|
||||
step_neg <= '0';
|
||||
wait_latency(clk, period-1);
|
||||
end if;
|
||||
|
||||
if(curr_vel_cnt /= vel_meas_cnt) then
|
||||
go_on := false;
|
||||
else
|
||||
if(pos_cnt >= pos_inc_num and neg_cnt >= neg_inc_num)then
|
||||
wait_latency(clk, period);
|
||||
end if;
|
||||
end if;
|
||||
|
||||
end loop;
|
||||
|
||||
end procedure gen_abs_pos;
|
||||
|
||||
|
||||
begin
|
||||
|
||||
end_of_stimuli <= false;
|
||||
--
|
||||
pd_in <= '0';
|
||||
abs_position <= (others => '0');
|
||||
step_pos <= '0';
|
||||
step_neg <= '0';
|
||||
|
||||
-- wait until init is deasserted
|
||||
wait until falling_edge(init);
|
||||
|
||||
|
||||
gen_abs_pos(
|
||||
pos_inc_num => 50, neg_inc_num => 0, period => 10,
|
||||
step_pos => step_pos, step_neg => step_neg, abs_position => abs_position);
|
||||
|
||||
gen_abs_pos(
|
||||
pos_inc_num => 40, neg_inc_num => 0, period => 10,
|
||||
step_pos => step_pos, step_neg => step_neg, abs_position => abs_position);
|
||||
|
||||
gen_abs_pos(
|
||||
pos_inc_num => 30, neg_inc_num => 0, period => 10,
|
||||
step_pos => step_pos, step_neg => step_neg, abs_position => abs_position);
|
||||
|
||||
gen_abs_pos(
|
||||
pos_inc_num => 20, neg_inc_num => 0, period => 10,
|
||||
step_pos => step_pos, step_neg => step_neg, abs_position => abs_position);
|
||||
|
||||
gen_abs_pos(
|
||||
pos_inc_num => 10, neg_inc_num => 0, period => 10,
|
||||
step_pos => step_pos, step_neg => step_neg, abs_position => abs_position);
|
||||
|
||||
gen_abs_pos(
|
||||
pos_inc_num => 0, neg_inc_num => 10, period => 10,
|
||||
step_pos => step_pos, step_neg => step_neg, abs_position => abs_position);
|
||||
|
||||
gen_abs_pos(
|
||||
pos_inc_num => 0, neg_inc_num => 20, period => 10,
|
||||
step_pos => step_pos, step_neg => step_neg, abs_position => abs_position);
|
||||
|
||||
gen_abs_pos(
|
||||
pos_inc_num => 50, neg_inc_num => 5, period => 10,
|
||||
step_pos => step_pos, step_neg => step_neg, abs_position => abs_position);
|
||||
|
||||
gen_abs_pos(
|
||||
pos_inc_num => 50, neg_inc_num => 15, period => 10,
|
||||
step_pos => step_pos, step_neg => step_neg, abs_position => abs_position);
|
||||
|
||||
gen_abs_pos(
|
||||
pos_inc_num => 500, neg_inc_num => 0, period => 10,
|
||||
step_pos => step_pos, step_neg => step_neg, abs_position => abs_position);
|
||||
|
||||
gen_abs_pos(
|
||||
pos_inc_num => 150, neg_inc_num => 0, period => 6,
|
||||
step_pos => step_pos, step_neg => step_neg, abs_position => abs_position);
|
||||
|
||||
gen_abs_pos(
|
||||
pos_inc_num => 100, neg_inc_num => 0, period => 40,
|
||||
step_pos => step_pos, step_neg => step_neg, abs_position => abs_position);
|
||||
|
||||
gen_abs_pos(
|
||||
pos_inc_num => 100, neg_inc_num => 0, period => 40,
|
||||
step_pos => step_pos, step_neg => step_neg, abs_position => abs_position);
|
||||
|
||||
|
||||
|
||||
|
||||
wait for 200 us;
|
||||
|
||||
-- completed
|
||||
end_of_stimuli <= true;
|
||||
|
||||
wait;
|
||||
|
||||
end process pSTIMULI;
|
||||
|
||||
-----------------------------------------------------------------------------
|
||||
-- Check the output
|
||||
-----------------------------------------------------------------------------
|
||||
|
||||
pOUT_CNT : process(clk)
|
||||
begin
|
||||
if(clk = '1' and clk'event) then
|
||||
fire_req_d <= fire_req;
|
||||
raw_fire_req_d <= raw_fire_req;
|
||||
if(init = '1') then
|
||||
fire_cnt <= 0;
|
||||
elsif(fire_req = '1' and fire_req = '0') then
|
||||
fire_cnt <= fire_cnt+1;
|
||||
end if;
|
||||
if(init = '1') then
|
||||
raw_fire_cnt <= 0;
|
||||
elsif(raw_fire_req = '1' and raw_fire_req_d = '0') then
|
||||
raw_fire_cnt <= raw_fire_cnt+1;
|
||||
end if;
|
||||
end if;
|
||||
end process pOUT_CNT;
|
||||
|
||||
-----------------------------------------------------------------------------
|
||||
-- Testbench Main
|
||||
-----------------------------------------------------------------------------
|
||||
|
||||
pTB_CTRL : process
|
||||
|
||||
variable addr : std_logic_vector(31 downto 0) := (others => '0');
|
||||
variable data : std_logic_vector(31 downto 0) := (others => '0');
|
||||
|
||||
begin
|
||||
|
||||
-- Set the verbosity level for logging
|
||||
set_log_verbosity(VERBOSITY_LEVEL);
|
||||
--set_log_verbosity(VHIGH);
|
||||
|
||||
-- initilialize the Avalon master-bus
|
||||
mm_m_init(avs_m);
|
||||
|
||||
log_header("Time-of-Flight Compensation verification:", VLOW);
|
||||
|
||||
setup <= false;
|
||||
running <= false;
|
||||
passed <= false;
|
||||
error_flag := false;
|
||||
|
||||
init <= '0';
|
||||
|
||||
-- Reset
|
||||
reset_n <= '0';
|
||||
wait for 100 ns;
|
||||
wait until clk = '1' and clk'event;
|
||||
reset_n <= '1';
|
||||
|
||||
---------------------------------------------------------------------------
|
||||
-- Pulse-Generator Configuration
|
||||
---------------------------------------------------------------------------
|
||||
|
||||
wait for 200 ns;
|
||||
|
||||
apply_pg_cfg(
|
||||
div_ratio => DIV_RATIO,
|
||||
offset_dir0 => 0,
|
||||
offset_dir1 => 0,
|
||||
delay => 100,
|
||||
dir => '0',
|
||||
tof_enable => '1',
|
||||
enc_speed_norm => 256,
|
||||
mm_s_rec => avs_s, mm_m_rec => avs_m);
|
||||
|
||||
|
||||
---------------------------------------------------------------------------
|
||||
-- Movement Simulation
|
||||
---------------------------------------------------------------------------
|
||||
|
||||
wait for 200 ns;
|
||||
wait until clk = '1' and clk'event;
|
||||
init <= '1';
|
||||
wait until clk = '1' and clk'event;
|
||||
wait until clk = '1' and clk'event;
|
||||
wait until clk = '1' and clk'event;
|
||||
init <= '0';
|
||||
wait for 200 ns;
|
||||
|
||||
running <= true;
|
||||
wait until clk = '1' and clk'event;
|
||||
|
||||
|
||||
|
||||
|
||||
wait until (end_of_stimuli = true) or (vel_meas_cnt = SIM_CYCLES + 1);
|
||||
running <= false;
|
||||
|
||||
if(fire_cnt /= raw_fire_cnt) then
|
||||
log("Error: Fire-Cnt = " & to_string(fire_cnt) & ". Raw-Pulse-Cnt = " & to_string(raw_fire_cnt), VLOW);
|
||||
error_flag := true;
|
||||
else
|
||||
log("Completed: Generated " & to_string(fire_cnt) & " fire-requests", VLOW);
|
||||
end if;
|
||||
|
||||
--
|
||||
|
||||
passed <= true after 100 ns;
|
||||
wait;
|
||||
|
||||
end process pTB_CTRL;
|
||||
|
||||
failed <= error_flag after 100 ns;
|
||||
|
||||
pREPORT_RESULT : process
|
||||
begin
|
||||
wait until failed = true or passed = true;
|
||||
wait for 1 us;
|
||||
log_separator_line(VLOW);
|
||||
if(failed = true) then
|
||||
log("FAILURE: test completed with errors.", VLOW);
|
||||
elsif(passed = true) then
|
||||
log("SUCCESS: test successfully completed.", VLOW);
|
||||
end if;
|
||||
log_separator_line(VLOW);
|
||||
test_completed <= true;
|
||||
end process pREPORT_RESULT;
|
||||
|
||||
|
||||
end architecture behav;
|
||||
158
generic_ip/pulse_generator/3/src/test/wh_wheel_corr.m
Normal file
158
generic_ip/pulse_generator/3/src/test/wh_wheel_corr.m
Normal file
|
|
@ -0,0 +1,158 @@
|
|||
%%/////////////////////////////////////////////////////////////////////////////
|
||||
%% Title : wh_wheel_corr
|
||||
%%/////////////////////////////////////////////////////////////////////////////
|
||||
%% File : wh_wheel_corr.m
|
||||
%% Author : Gianmarco Girau
|
||||
%% Company : GIS
|
||||
%% Target : GIS-HMB board
|
||||
%% Dependency : none
|
||||
%%/////////////////////////////////////////////////////////////////////////////
|
||||
%% Description: Verify the stability of loop corrections for W&H
|
||||
%%/////////////////////////////////////////////////////////////////////////////
|
||||
%% Last update: 2019-06-07
|
||||
%%/////////////////////////////////////////////////////////////////////////////
|
||||
%% Revisions :
|
||||
%% Date Version Author Description
|
||||
%% 2016-09-16 01.00.0a gmg Created
|
||||
%%/////////////////////////////////////////////////////////////////////////////
|
||||
|
||||
|
||||
close all
|
||||
clear all
|
||||
clc
|
||||
|
||||
|
||||
%head_pitch_um = 20.0
|
||||
head_pitch_um = 4.23*5.0
|
||||
encoder_res_um = 5.0
|
||||
image_pixel_lenght = 100
|
||||
div_ratio_nom = head_pitch_um/encoder_res_um
|
||||
wheel_circum = image_pixel_lenght*div_ratio_nom
|
||||
|
||||
total_rotations = 100;
|
||||
|
||||
% Define a error vector for wheel rotations
|
||||
|
||||
|
||||
wheel_error_v = [0, 0, 0, 0, 0, 1, 1, 1, 1, 1, ...
|
||||
2, 2, 3, 3, 4, 4, 5, 5, 4, 4, ...
|
||||
3, 3, 2, 2, 1, 1, 0, 0, -1, -1, ...
|
||||
-2, -2, -3, -3, -4, -4, -5, -5, -4, -4, ...
|
||||
-3, -3, -2, -2, -1, -1, 0, 0, 0, 0, ...
|
||||
0, 0, 0, 0, 0, 1, 0, 0, -1, 0, 1, 1, ...
|
||||
1, 1, 0, 0, -1, -1, -1, -1, 0, 0, -40, 0, 0, +80];
|
||||
|
||||
|
||||
N = total_rotations - length(wheel_error_v)
|
||||
wheel_error_v = [wheel_error_v 40*ones(1,N)];
|
||||
|
||||
|
||||
|
||||
wheel_error_v = zeros(1,total_rotations);
|
||||
%wheel_error_v(10) = 40
|
||||
wheel_error_v(10:end) = 40;
|
||||
|
||||
%{
|
||||
% Continuously changing
|
||||
error_rel_max = 0.1
|
||||
x = 0:total_rotations-1;
|
||||
wheel_error_v = (0.1*wheel_circum)*sin(2*pi*x/total_rotations);
|
||||
%}
|
||||
|
||||
|
||||
%{
|
||||
% Change and poause
|
||||
error_rel_max = 0.1
|
||||
x = 0:total_rotations-1;
|
||||
%k = 5.0;
|
||||
k = 10;
|
||||
x = floor(x/k);
|
||||
wheel_error_v = (0.1*wheel_circum)*sin(2*pi*x/(total_rotations/k));
|
||||
%}
|
||||
|
||||
|
||||
|
||||
% Continuously changing
|
||||
%{
|
||||
error_rel_max = 0.1
|
||||
x = 0:total_rotations-1;
|
||||
wheel_error_v = (0.1*wheel_circum)*sin(2*pi*x/total_rotations);
|
||||
%}
|
||||
|
||||
|
||||
|
||||
|
||||
pd_pos(1) = 0;
|
||||
tot_pixels(1) = 0;
|
||||
end_image(1) = 0;
|
||||
pos_error(1) = 0;
|
||||
div_ratio(1) = div_ratio_nom;
|
||||
for n = 1:total_rotations
|
||||
delta_dist = wheel_circum + wheel_error_v(n);
|
||||
pd_pos(n+1) = pd_pos(n)+ delta_dist;
|
||||
tot_pixels(n+1) = tot_pixels(n)+ delta_dist/div_ratio(n);
|
||||
end_image(n+1) = end_image(n)+div_ratio(n)*image_pixel_lenght;
|
||||
pos_error(n+1) = pd_pos(n+1)-end_image(n+1);
|
||||
% No Correction
|
||||
%div_ratio(n+1) = div_ratio_nom;
|
||||
% Basic Correction: FLL
|
||||
%div_ratio(n+1) = div_ratio_nom+pos_error(n+1)/image_pixel_lenght;
|
||||
% Correction Accumulation:
|
||||
%div_ratio(n+1) = div_ratio(n)+pos_error(n+1)/image_pixel_lenght;
|
||||
% PLL Correction:
|
||||
delta_error = pos_error(n+1)-pos_error(n);
|
||||
tot_error = pos_error(n+1);
|
||||
% 1
|
||||
%alpha = 1.0;
|
||||
%beta = 0.05;
|
||||
% 2
|
||||
%alpha = 1.0;
|
||||
%beta = 0.5;
|
||||
% 3
|
||||
alpha = 1.0;
|
||||
beta = 1.0;
|
||||
div_ratio(n+1) = div_ratio(n)+(alpha*delta_error+beta*tot_error)/image_pixel_lenght;
|
||||
|
||||
end
|
||||
|
||||
|
||||
figure(1);
|
||||
plot(wheel_error_v, 'r*')
|
||||
grid on;
|
||||
title('Wheel Errors')
|
||||
|
||||
%{
|
||||
figure(2);
|
||||
plot(pd_pos, 'b');
|
||||
grid on;
|
||||
title('PD position')
|
||||
|
||||
|
||||
figure(3);
|
||||
plot(tot_pixels, 'b');
|
||||
grid on;
|
||||
title('Total Pixels')
|
||||
|
||||
figure(4);
|
||||
plot(end_image, 'b^');
|
||||
grid on;
|
||||
title('End Image')
|
||||
%}
|
||||
|
||||
figure(5);
|
||||
plot(div_ratio, 'k^');
|
||||
grid on;
|
||||
title('Division Ratio')
|
||||
|
||||
figure(6);
|
||||
plot(pos_error, 'b^');
|
||||
grid on;
|
||||
title('Position Error')
|
||||
|
||||
pd_pos(end)
|
||||
tot_pixels(end)
|
||||
|
||||
effective_ratio = pd_pos(end)/tot_pixels(end)
|
||||
|
||||
|
||||
|
||||
|
|
@ -2,4 +2,6 @@ Pulse-Generator major versions:
|
|||
|
||||
- 1: Original, now depracated cause it doers not include a bug fix on the Queue&Delay block
|
||||
|
||||
- 2: Include Pixel-Pitch Correction, Time-of-Flight Compensation, Q&D block bug fix
|
||||
- 2: Include Pixel-Pitch Correction, Time-of-Flight Compensation, Q&D block bug fix
|
||||
|
||||
- 3: Generate multiple subpixel offsets. Removed legacy code like output pulse conditioning and overdrive detection.
|
||||
Loading…
Add table
Add a link
Reference in a new issue