WH-16 - Completed verification of Print-Start/Stop bit, replaced uart_rx/uart_regen blocks with constant bit-div and improved timing
This commit is contained in:
parent
179b079867
commit
f62293b1eb
13 changed files with 311 additions and 394 deletions
|
|
@ -62,9 +62,9 @@ add_fileset_file queue_and_delay.vhd VHDL PATH ../../../common/0/src/queue_and_d
|
|||
add_fileset_file simple_frac_div_2.vhd VHDL PATH ../../../pulse_generator/2/src/simple_frac_div_2.vhd
|
||||
add_fileset_file pulse_generator_2_pkg.vhd VHDL PATH ../../../pulse_generator/2/src/pulse_generator_2_pkg.vhd
|
||||
add_fileset_file pulse_generator_2.vhd VHDL PATH ../../../pulse_generator/2/src/pulse_generator_2.vhd
|
||||
add_fileset_file uart_rx_1.vhd VHDL PATH ../../../pof_protocol/1/src/uart_rx_1.vhd
|
||||
add_fileset_file pof_uart_rx_1.vhd VHDL PATH ../../../pof_protocol/1/src/pof_uart_rx_1.vhd
|
||||
add_fileset_file pof_rx_1.vhd VHDL PATH ../../../pof_protocol/1/src/pof_rx_1.vhd
|
||||
add_fileset_file uart_regen_1.vhd VHDL PATH ../../../pof_protocol/1/src/uart_regen_1.vhd
|
||||
add_fileset_file pof_uart_regen_1.vhd VHDL PATH ../../../pof_protocol/1/src/pof_uart_regen_1.vhd
|
||||
add_fileset_file smb_diagnostics_2.vhd VHDL PATH ../src/smb_diagnostics_2.vhd
|
||||
add_fileset_file fire_pulse_2_pkg.vhd VHDL PATH ../src/fire_pulse_2_pkg.vhd
|
||||
add_fileset_file simple_enc_vel_detect.vhd VHDL PATH ../src/simple_enc_vel_detect.vhd
|
||||
|
|
@ -96,9 +96,9 @@ add_fileset_file queue_and_delay.vhd VHDL PATH ../../../common/0/src/queue_and_d
|
|||
add_fileset_file simple_frac_div_2.vhd VHDL PATH ../../../pulse_generator/2/src/simple_frac_div_2.vhd
|
||||
add_fileset_file pulse_generator_2_pkg.vhd VHDL PATH ../../../pulse_generator/2/src/pulse_generator_2_pkg.vhd
|
||||
add_fileset_file pulse_generator_2.vhd VHDL PATH ../../../pulse_generator/2/src/pulse_generator_2.vhd
|
||||
add_fileset_file uart_rx_1.vhd VHDL PATH ../../../pof_protocol/1/src/uart_rx_1.vhd
|
||||
add_fileset_file pof_uart_rx_1.vhd VHDL PATH ../../../pof_protocol/1/src/pof_uart_rx_1.vhd
|
||||
add_fileset_file pof_rx_1.vhd VHDL PATH ../../../pof_protocol/1/src/pof_rx_1.vhd
|
||||
add_fileset_file uart_regen_1.vhd VHDL PATH ../../../pof_protocol/1/src/uart_regen_1.vhd
|
||||
add_fileset_file pof_uart_regen_1.vhd VHDL PATH ../../../pof_protocol/1/src/pof_uart_regen_1.vhd
|
||||
add_fileset_file smb_diagnostics_2.vhd VHDL PATH ../src/smb_diagnostics_2.vhd
|
||||
add_fileset_file fire_pulse_2_pkg.vhd VHDL PATH ../src/fire_pulse_2_pkg.vhd
|
||||
add_fileset_file simple_enc_vel_detect.vhd VHDL PATH ../src/simple_enc_vel_detect.vhd
|
||||
|
|
|
|||
|
|
@ -53,9 +53,9 @@ vcom -2008 -work $WORKLIB $LOG_PATH/event_logger_0.vhd
|
|||
|
||||
# Fire-Pulse-Manager
|
||||
vcom -2008 -work $WORKLIB $COMMON_PATH/cs_bus_itf.vhd
|
||||
vcom -2008 -work $WORKLIB $POF_PATH/uart_rx_1.vhd
|
||||
vcom -2008 -work $WORKLIB $POF_PATH/pof_uart_rx_1.vhd
|
||||
vcom -2008 -work $WORKLIB $POF_PATH/pof_rx_1.vhd
|
||||
vcom -2008 -work $WORKLIB $POF_PATH/uart_regen_1.vhd
|
||||
vcom -2008 -work $WORKLIB $POF_PATH/pof_uart_regen_1.vhd
|
||||
vcom -2008 -work $WORKLIB $SRC_PATH/smb_diagnostics_2.vhd
|
||||
vcom -2008 -work $WORKLIB $SRC_PATH/simple_enc_vel_detect.vhd
|
||||
vcom -2008 -work $WORKLIB $SRC_PATH/fire_pulse_2_pkg.vhd
|
||||
|
|
|
|||
|
|
@ -6,7 +6,7 @@
|
|||
-- Author : Gianmarco Girau
|
||||
-- Company : Global Inkjet Systems
|
||||
-- Created : 2017-09-06
|
||||
-- Last update: 2019-09-24
|
||||
-- Last update: 2019-09-25
|
||||
-- SVN ID : Git
|
||||
-- Standard : VHDL'08
|
||||
-------------------------------------------------------------------------------
|
||||
|
|
@ -159,12 +159,15 @@ begin
|
|||
uart_regen_bypass <= uart_regen_bypass_i;
|
||||
|
||||
-- latch src_sel to improve timing
|
||||
/*
|
||||
pSRC_SEL_L : process(clk)
|
||||
begin
|
||||
if(clk = '1' and clk'event) then
|
||||
src_sel <= src_sel_i;
|
||||
end if;
|
||||
end process pSRC_SEL_L;
|
||||
*/
|
||||
src_sel <= src_sel_i;
|
||||
|
||||
uart_bit_div <= bit_div;
|
||||
upd_max_pos <= upd_max_pos_i;
|
||||
|
|
|
|||
|
|
@ -6,7 +6,7 @@
|
|||
-- Author : Gianmarco Girau
|
||||
-- Company : Global Inkjet Systems
|
||||
-- Created : 2017-09-06
|
||||
-- Last update: 2019-09-24
|
||||
-- Last update: 2019-09-27
|
||||
-- SVN ID : Git
|
||||
-- Standard : VHDL'08
|
||||
-------------------------------------------------------------------------------
|
||||
|
|
@ -58,7 +58,10 @@ architecture rtl of fire_pulse_manager_2 is
|
|||
constant PD_QUEUE_SIZE : natural := 512;
|
||||
|
||||
-- Period used for Time-of-Flight compensation velocity measurememnt
|
||||
constant VEL_MEAS_PERIOD : natural := 10000;
|
||||
constant VEL_MEAS_PERIOD : natural := 10000;
|
||||
|
||||
constant POF_UART_BIT_BIV : integer := 6; -- POF-Rx UART sampling clock vs
|
||||
-- baudrate ratio
|
||||
|
||||
signal reset_n_i : std_logic;
|
||||
--
|
||||
|
|
@ -105,7 +108,7 @@ architecture rtl of fire_pulse_manager_2 is
|
|||
signal rx_watchdog : std_logic;
|
||||
signal rx_watchdog_en : std_logic;
|
||||
signal rx_watchdog_clr : std_logic;
|
||||
signal bit_div : std_logic_vector( 3 downto 0);
|
||||
signal print_start_i : std_logic;
|
||||
signal error_rate_thres : std_logic_vector( 7 downto 0);
|
||||
signal parity_err_cnt : std_logic_vector(15 downto 0);
|
||||
signal skip_pos_cnt : std_logic_vector(15 downto 0);
|
||||
|
|
@ -218,7 +221,7 @@ begin
|
|||
upd_max_pos => open,
|
||||
upd_min_pos => open,
|
||||
enable_rx => enable_rx,
|
||||
uart_bit_div => bit_div,
|
||||
uart_bit_div => open,
|
||||
error_rate_thres => error_rate_thres,
|
||||
max_error_flag => max_error_flag,
|
||||
rx_watchdog => rx_watchdog,
|
||||
|
|
@ -271,8 +274,9 @@ begin
|
|||
mon_point_src(9) <= fire_pulse_i;
|
||||
mon_point_src(10) <= inc_pos;
|
||||
mon_point_src(11) <= dec_pos;
|
||||
mon_point_src(12) <= print_start_i;
|
||||
--
|
||||
mon_point_src(15 downto 12) <= (others => '0');
|
||||
mon_point_src(15 downto 13) <= (others => '0');
|
||||
|
||||
pof_iso_en <= enable_rx;
|
||||
|
||||
|
|
@ -326,6 +330,8 @@ begin
|
|||
|
||||
-- POF Receiver
|
||||
iPOF_RX : entity work.pof_rx_1
|
||||
generic map(
|
||||
GEN_BIT_DIV => POF_UART_BIT_BIV)
|
||||
port map(
|
||||
reset_n => reset_n_i,
|
||||
clk => clk,
|
||||
|
|
@ -334,12 +340,11 @@ begin
|
|||
rx_data => pof_rx,
|
||||
init_out => remote_init,
|
||||
pd_out => pd_pulse_pof,
|
||||
print_start => print_start,
|
||||
print_start => print_start_i,
|
||||
inc_pos => inc_pos_pof,
|
||||
dec_pos => dec_pos_pof,
|
||||
abs_pos => abs_pos_pof,
|
||||
enable => enable_rx,
|
||||
bit_div => bit_div,
|
||||
error_rate_thres => error_rate_thres,
|
||||
one_pps => one_pps,
|
||||
max_error_flag => max_error_flag,
|
||||
|
|
@ -349,14 +354,16 @@ begin
|
|||
parity_err_cnt => parity_err_cnt,
|
||||
skip_pos_cnt => skip_pos_cnt);
|
||||
|
||||
print_start <= print_start_i;
|
||||
|
||||
-- UART signal regeneration
|
||||
iUART_REGEN : entity work.uart_regen_1
|
||||
iUART_REGEN : entity work.pof_uart_regen_1
|
||||
generic map(
|
||||
data_width => 8)
|
||||
GEN_BIT_DIV => POF_UART_BIT_BIV,
|
||||
data_width => 9)
|
||||
port map(
|
||||
reset_n => reset_n,
|
||||
clk => rx_clk,
|
||||
bit_div => bit_div,
|
||||
enable => enable_rx,
|
||||
bypass_en => uart_regen_bypass,
|
||||
uart_rx => pof_rx,
|
||||
|
|
|
|||
|
|
@ -41,7 +41,7 @@
|
|||
"type" : "w",
|
||||
"bit_len" : "1",
|
||||
"reset" : "0x0",
|
||||
"description" : "Enables queueing up events in the POF-Tx FIFO, each time there is a change in Print-Start value"
|
||||
"description" : "Enables queuing up events in the POF-Tx FIFO, each time there is a change in Print-Start value"
|
||||
},
|
||||
"print_start_src" : {
|
||||
"type" : "w",
|
||||
|
|
|
|||
|
|
@ -39,7 +39,7 @@ vcom -2008 -work $WORKLIB $COMMON_PATH/sync_wire_redge.vhd
|
|||
--vcom -2008 -work $WORKLIB ../src/altera/fifo_16x8.vhd
|
||||
vcom -2008 -work $WORKLIB $COMMON_PATH/altera/sync_fifo.vhd
|
||||
vcom -2008 -work $WORKLIB ../src/uart_tx_1.vhd
|
||||
vcom -2008 -work $WORKLIB ../src/uart_rx_1.vhd
|
||||
vcom -2008 -work $WORKLIB ../src/pof_uart_rx_1.vhd
|
||||
vcom -2008 -work $WORKLIB ../src/pof_tx_1.vhd
|
||||
vcom -2008 -work $WORKLIB ../src//pof_rx_1.vhd
|
||||
|
||||
|
|
|
|||
|
|
@ -28,6 +28,9 @@ add wave -noupdate /pof_tx_rx_1_tb/pd_out
|
|||
add wave -noupdate /pof_tx_rx_1_tb/inc_pos_out
|
||||
add wave -noupdate /pof_tx_rx_1_tb/dec_pos_out
|
||||
add wave -noupdate -radix decimal /pof_tx_rx_1_tb/abs_pos_out
|
||||
add wave -noupdate /pof_tx_rx_1_tb/print_start_in
|
||||
add wave -noupdate /pof_tx_rx_1_tb/print_start_out
|
||||
add wave -noupdate /pof_tx_rx_1_tb/ps_flip_cnt
|
||||
add wave -noupdate /pof_tx_rx_1_tb/test_completed
|
||||
add wave -noupdate /pof_tx_rx_1_tb/running
|
||||
add wave -noupdate /pof_tx_rx_1_tb/configuring
|
||||
|
|
@ -58,6 +61,7 @@ add wave -noupdate /pof_tx_rx_1_tb/pd_err
|
|||
add wave -noupdate /pof_tx_rx_1_tb/pos_err
|
||||
add wave -noupdate /pof_tx_rx_1_tb/enc_err
|
||||
add wave -noupdate /pof_tx_rx_1_tb/ovfl_err
|
||||
add wave -noupdate /pof_tx_rx_1_tb/ps_err
|
||||
add wave -noupdate /pof_tx_rx_1_tb/injected_errors
|
||||
add wave -noupdate /pof_tx_rx_1_tb/max_pos
|
||||
add wave -noupdate /pof_tx_rx_1_tb/min_pos
|
||||
|
|
@ -135,6 +139,7 @@ add wave -noupdate /pof_tx_rx_1_tb/iPOF_RX/pd_out
|
|||
add wave -noupdate /pof_tx_rx_1_tb/iPOF_RX/inc_pos
|
||||
add wave -noupdate /pof_tx_rx_1_tb/iPOF_RX/dec_pos
|
||||
add wave -noupdate -radix decimal /pof_tx_rx_1_tb/iPOF_RX/abs_pos
|
||||
add wave -noupdate /pof_tx_rx_1_tb/print_start_out
|
||||
add wave -noupdate -radix unsigned /pof_tx_rx_1_tb/iPOF_RX/error_rate_thres
|
||||
add wave -noupdate /pof_tx_rx_1_tb/iPOF_RX/one_pps
|
||||
add wave -noupdate /pof_tx_rx_1_tb/iPOF_RX/max_error_flag
|
||||
|
|
@ -165,6 +170,16 @@ add wave -noupdate /pof_tx_rx_1_tb/iPOF_RX/toggle_pd
|
|||
add wave -noupdate /pof_tx_rx_1_tb/iPOF_RX/pd_confirmed
|
||||
add wave -noupdate /pof_tx_rx_1_tb/iPOF_RX/pd_toggle_test
|
||||
add wave -noupdate /pof_tx_rx_1_tb/iPOF_RX/pd
|
||||
add wave -noupdate /pof_tx_rx_1_tb/print_start_in
|
||||
add wave -noupdate /pof_tx_rx_1_tb/print_start_out
|
||||
add wave -noupdate /pof_tx_rx_1_tb/ps_flip_cnt
|
||||
add wave -noupdate /pof_tx_rx_1_tb/iPOF_RX/ps_gen
|
||||
add wave -noupdate /pof_tx_rx_1_tb/iPOF_RX/ps_new
|
||||
add wave -noupdate /pof_tx_rx_1_tb/iPOF_RX/ps_confirmed
|
||||
add wave -noupdate /pof_tx_rx_1_tb/iPOF_RX/ps_test
|
||||
add wave -noupdate /pof_tx_rx_1_tb/iPOF_RX/rx_error
|
||||
add wave -noupdate /pof_tx_rx_1_tb/iPOF_RX/rx_error_i
|
||||
add wave -noupdate /pof_tx_rx_1_tb/iPOF_RX/print_start_i
|
||||
add wave -noupdate /pof_tx_rx_1_tb/iPOF_RX/valid_pos
|
||||
add wave -noupdate /pof_tx_rx_1_tb/iPOF_RX/upd_pos
|
||||
add wave -noupdate /pof_tx_rx_1_tb/iPOF_RX/corr_done
|
||||
|
|
@ -190,26 +205,14 @@ add wave -noupdate /pof_tx_rx_1_tb/iPOF_RX/dec_pos_ii
|
|||
add wave -noupdate /pof_tx_rx_1_tb/iPOF_RX/iRX_SYMBOL/data_width
|
||||
add wave -noupdate /pof_tx_rx_1_tb/iPOF_RX/iRX_SYMBOL/reset_n
|
||||
add wave -noupdate /pof_tx_rx_1_tb/iPOF_RX/iRX_SYMBOL/clk
|
||||
add wave -noupdate /pof_tx_rx_1_tb/iPOF_RX/iRX_SYMBOL/bit_div
|
||||
add wave -noupdate /pof_tx_rx_1_tb/iPOF_RX/iRX_SYMBOL/init
|
||||
add wave -noupdate /pof_tx_rx_1_tb/iPOF_RX/iRX_SYMBOL/data_out
|
||||
add wave -noupdate /pof_tx_rx_1_tb/iPOF_RX/iRX_SYMBOL/data_out_valid
|
||||
add wave -noupdate /pof_tx_rx_1_tb/iPOF_RX/iRX_SYMBOL/rx_data
|
||||
add wave -noupdate /pof_tx_rx_1_tb/iPOF_RX/iRX_SYMBOL/fsm_state_curr
|
||||
add wave -noupdate /pof_tx_rx_1_tb/iPOF_RX/iRX_SYMBOL/fsm_state_next
|
||||
add wave -noupdate /pof_tx_rx_1_tb/iPOF_RX/iRX_SYMBOL/rx_data_i
|
||||
add wave -noupdate /pof_tx_rx_1_tb/iPOF_RX/iRX_SYMBOL/shf_data
|
||||
add wave -noupdate /pof_tx_rx_1_tb/iPOF_RX/iRX_SYMBOL/rst_bit_cnt
|
||||
add wave -noupdate /pof_tx_rx_1_tb/iPOF_RX/iRX_SYMBOL/inc_bit_cnt
|
||||
add wave -noupdate /pof_tx_rx_1_tb/iPOF_RX/iRX_SYMBOL/rst_clk_cnt
|
||||
add wave -noupdate /pof_tx_rx_1_tb/iPOF_RX/iRX_SYMBOL/end_of_bit
|
||||
add wave -noupdate /pof_tx_rx_1_tb/iPOF_RX/iRX_SYMBOL/end_of_rx
|
||||
add wave -noupdate /pof_tx_rx_1_tb/iPOF_RX/iRX_SYMBOL/data_valid
|
||||
add wave -noupdate /pof_tx_rx_1_tb/iPOF_RX/iRX_SYMBOL/stop_bit
|
||||
add wave -noupdate /pof_tx_rx_1_tb/iPOF_RX/iRX_SYMBOL/data
|
||||
add wave -noupdate /pof_tx_rx_1_tb/iPOF_RX/iRX_SYMBOL/bit_cnt
|
||||
TreeUpdate [SetDefaultTree]
|
||||
WaveRestoreCursors {{Cursor 1} {18949975000 ps} 0}
|
||||
WaveRestoreCursors {{Cursor 1} {1338555000 ps} 0}
|
||||
quietly wave cursor active 1
|
||||
configure wave -namecolwidth 305
|
||||
configure wave -valuecolwidth 100
|
||||
|
|
@ -225,4 +228,4 @@ configure wave -griddelta 40
|
|||
configure wave -timeline 0
|
||||
configure wave -timelineunits ps
|
||||
update
|
||||
WaveRestoreZoom {16743248207 ps} {29628150095 ps}
|
||||
WaveRestoreZoom {0 ps} {3221225472 ps}
|
||||
|
|
|
|||
|
|
@ -6,7 +6,7 @@
|
|||
-- Author : Gianmarco Girau
|
||||
-- Company : Global Inkjet Systems
|
||||
-- Created : 2017-08-23
|
||||
-- Last update: 2019-09-24
|
||||
-- Last update: 2019-09-27
|
||||
-- SVN ID : Git
|
||||
-- Standard : VHDL'08
|
||||
-------------------------------------------------------------------------------
|
||||
|
|
@ -20,6 +20,8 @@ use ieee.std_logic_1164.all;
|
|||
use ieee.numeric_std.all;
|
||||
|
||||
entity pof_rx_1 is
|
||||
generic(
|
||||
GEN_BIT_DIV : integer := 6);
|
||||
port(
|
||||
reset_n : in std_logic;
|
||||
clk : in std_logic;
|
||||
|
|
@ -35,7 +37,6 @@ entity pof_rx_1 is
|
|||
abs_pos : out std_logic_vector(31 downto 0);
|
||||
-- C&S
|
||||
enable : in std_logic;
|
||||
bit_div : in std_logic_vector(3 downto 0);
|
||||
error_rate_thres : in std_logic_vector(7 downto 0);
|
||||
one_pps : in std_logic;
|
||||
max_error_flag : out std_logic;
|
||||
|
|
@ -100,13 +101,13 @@ begin
|
|||
-- De-serialize symbols (Serial clock at 300 MHz - typical)
|
||||
-----------------------------------------------------------------------------
|
||||
|
||||
iRX_SYMBOL : entity work.uart_rx_1
|
||||
iRX_SYMBOL : entity work.pof_uart_rx_1
|
||||
generic map(
|
||||
data_width => 9)
|
||||
GEN_BIT_DIV => GEN_BIT_DIV,
|
||||
data_width => 9)
|
||||
port map(
|
||||
reset_n => reset_n,
|
||||
clk => rx_clk,
|
||||
bit_div => bit_div,
|
||||
init => clear_i,
|
||||
data_out => rx_symbol,
|
||||
data_out_valid => rx_symbol_val,
|
||||
|
|
@ -187,7 +188,9 @@ begin
|
|||
elsif (ps_gen = '1') then
|
||||
ps_test <= '1';
|
||||
end if;
|
||||
if(ps_confirmed = '1') then
|
||||
if(init = '1' or enable = '0') then
|
||||
print_start_i <= '0';
|
||||
elsif(ps_confirmed = '1') then
|
||||
print_start_i <= ps_new;
|
||||
end if;
|
||||
--
|
||||
|
|
|
|||
100
generic_ip/pof_protocol/1/src/pof_uart_regen_1.vhd
Normal file
100
generic_ip/pof_protocol/1/src/pof_uart_regen_1.vhd
Normal file
|
|
@ -0,0 +1,100 @@
|
|||
-------------------------------------------------------------------------------
|
||||
-- Title : uart_regen
|
||||
-- Project : EMB-1
|
||||
-------------------------------------------------------------------------------
|
||||
-- File : uart_regen.vhd
|
||||
-- Author : Gianmarco Girau/Simon Southwell
|
||||
-- Company : Global Inkjet Systems
|
||||
-- Created : 2017-10-31
|
||||
-- Last update: 2019-09-27
|
||||
-- SVN ID : Git
|
||||
-- Standard : VHDL'08
|
||||
-------------------------------------------------------------------------------
|
||||
-- Description:
|
||||
-- Regenerate the UART signal
|
||||
-------------------------------------------------------------------------------
|
||||
-- altera vhdl_input_version vhdl_2008
|
||||
|
||||
library ieee;
|
||||
use ieee.std_logic_1164.all;
|
||||
use ieee.numeric_std.all;
|
||||
|
||||
entity pof_uart_regen_1 is
|
||||
generic(
|
||||
GEN_BIT_DIV : integer := 6;
|
||||
data_width : natural range 1 to 31 := 8
|
||||
);
|
||||
port(
|
||||
reset_n : in std_logic;
|
||||
clk : in std_logic;
|
||||
enable : in std_logic;
|
||||
bypass_en : in std_logic;
|
||||
uart_rx : in std_logic;
|
||||
uart_tx : out std_logic);
|
||||
end entity pof_uart_regen_1;
|
||||
|
||||
architecture rtl of pof_uart_regen_1 is
|
||||
|
||||
signal uart_rx_i : std_logic;
|
||||
signal uart_regen : std_logic;
|
||||
signal receiving : std_logic;
|
||||
signal sample_cnt_unary : std_logic_vector(GEN_BIT_DIV-1 downto 0);
|
||||
signal bit_cnt_unary : std_logic_vector(data_width + 1 downto 0);
|
||||
|
||||
begin
|
||||
|
||||
-- output mux (maybe register?)
|
||||
uart_tx <= uart_rx when bypass_en = '1' else uart_regen;
|
||||
|
||||
-----------------------------------------------------------------------------
|
||||
-- Input Synchronization
|
||||
-----------------------------------------------------------------------------
|
||||
|
||||
iSYNC_IN : entity work.sync_wire
|
||||
generic map(
|
||||
rst_val => '1',
|
||||
sync_stages => 3)
|
||||
port map(
|
||||
rstN => reset_n,
|
||||
clk => clk,
|
||||
async_in => uart_rx,
|
||||
sync_out => uart_rx_i);
|
||||
|
||||
pREGEN : process(clk)
|
||||
begin
|
||||
if clk = '1' and clk'event then
|
||||
if enable = '0' or bypass_en = '1' then
|
||||
receiving <= '0';
|
||||
bit_cnt_unary <= std_logic_vector(to_unsigned(1, bit_cnt_unary'length));
|
||||
sample_cnt_unary <= std_logic_vector(to_unsigned(1, sample_cnt_unary'length));
|
||||
uart_regen <= '1';
|
||||
else
|
||||
-- If start bit seen when not receiving, start receiving and start unary sample count shifting (with rotation).
|
||||
-- Keep rotating whilst receiving.
|
||||
if (receiving = '0' and uart_rx_i = '0') or receiving = '1' then
|
||||
receiving <= '1';
|
||||
sample_cnt_unary <= sample_cnt_unary(sample_cnt_unary'high-1 downto 0) & sample_cnt_unary(sample_cnt_unary'high);
|
||||
end if;
|
||||
|
||||
end if;
|
||||
|
||||
-- At half way regenerate the input
|
||||
if sample_cnt_unary(GEN_BIT_DIV/2 - 1) = '1' then
|
||||
uart_regen <= uart_rx_i;
|
||||
end if;
|
||||
|
||||
-- After half way, up the bit count
|
||||
if sample_cnt_unary(GEN_BIT_DIV/2) = '1' then
|
||||
bit_cnt_unary <= bit_cnt_unary(bit_cnt_unary'high-1 downto 0) & bit_cnt_unary(bit_cnt_unary'high);
|
||||
end if;
|
||||
|
||||
-- If at the end of the last (stop) bit clear the receiving state.
|
||||
if sample_cnt_unary(GEN_BIT_DIV-1) = '1' and bit_cnt_unary(0) = '1' then
|
||||
receiving <= '0';
|
||||
end if;
|
||||
|
||||
end if;
|
||||
|
||||
end process pREGEN;
|
||||
|
||||
end architecture rtl;
|
||||
126
generic_ip/pof_protocol/1/src/pof_uart_rx_1.vhd
Normal file
126
generic_ip/pof_protocol/1/src/pof_uart_rx_1.vhd
Normal file
|
|
@ -0,0 +1,126 @@
|
|||
-------------------------------------------------------------------------------
|
||||
-- Title : pof_uart_rx
|
||||
-- Project : EMB-1
|
||||
-------------------------------------------------------------------------------
|
||||
-- File : pof_uart_rx.vhd
|
||||
-- Author : Gianmarco Girau/Simon Southwell
|
||||
-- Company : Global Inkjet Systems
|
||||
-- Created : 2016-10-24
|
||||
-- Last update: 2019-09-27
|
||||
-- SVN ID : Git
|
||||
-- Standard : VHDL'08
|
||||
-------------------------------------------------------------------------------
|
||||
-- Description:
|
||||
-- Simple UART receiver, used to receive data over the POF, 1 start, 1 stop
|
||||
-- bit, no parity
|
||||
-------------------------------------------------------------------------------
|
||||
-- altera vhdl_input_version vhdl_2008
|
||||
|
||||
library ieee;
|
||||
use ieee.std_logic_1164.all;
|
||||
use ieee.numeric_std.all;
|
||||
|
||||
entity pof_uart_rx_1 is
|
||||
generic(
|
||||
GEN_BIT_DIV : integer := 6;
|
||||
data_width : natural range 1 to 31 := 8
|
||||
);
|
||||
port(
|
||||
reset_n : in std_logic;
|
||||
clk : in std_logic;
|
||||
init : in std_logic;
|
||||
data_out : out std_logic_vector(data_width - 1 downto 0);
|
||||
data_out_valid : out std_logic;
|
||||
rx_error : out std_logic;
|
||||
rx_data : in std_logic);
|
||||
end entity pof_uart_rx_1;
|
||||
|
||||
architecture rtl of pof_uart_rx_1 is
|
||||
|
||||
signal rx_data_i : std_logic;
|
||||
signal data : std_logic_vector(data_width + 1 downto 0);
|
||||
|
||||
signal bit_cnt_unary : std_logic_vector(data_width + 1 downto 0);
|
||||
signal sample_cnt_unary : std_logic_vector(GEN_BIT_DIV-1 downto 0);
|
||||
signal receiving : std_logic;
|
||||
signal init_int : std_logic := '0';
|
||||
|
||||
begin
|
||||
|
||||
-----------------------------------------------------------------------------
|
||||
-- Input Synchronization
|
||||
-----------------------------------------------------------------------------
|
||||
|
||||
iSYNC_IN : entity work.sync_wire
|
||||
generic map(
|
||||
rst_val => '1',
|
||||
sync_stages => 3)
|
||||
port map(
|
||||
rstN => reset_n,
|
||||
clk => clk,
|
||||
async_in => rx_data,
|
||||
sync_out => rx_data_i);
|
||||
|
||||
-----------------------------------------------------------------------------
|
||||
-- UART registers and sequential logic
|
||||
-----------------------------------------------------------------------------
|
||||
|
||||
pRX : process(clk)
|
||||
begin
|
||||
if clk = '1' and clk'event then
|
||||
|
||||
init_int <= init;
|
||||
|
||||
-- Data out valid will pulse
|
||||
data_out_valid <= '0';
|
||||
rx_error <= '0';
|
||||
|
||||
-- If initialising, only clear control state
|
||||
if init_int = '1' then
|
||||
|
||||
receiving <= '0';
|
||||
bit_cnt_unary <= std_logic_vector(to_unsigned(1, bit_cnt_unary'length));
|
||||
sample_cnt_unary <= std_logic_vector(to_unsigned(1, sample_cnt_unary'length));
|
||||
|
||||
else
|
||||
|
||||
-- If start bit seen when not receiving, start receiving and start unary sample count shifting (with rotation).
|
||||
-- Keep rotating whilst receiving.
|
||||
if (receiving = '0' and rx_data_i = '0') or receiving = '1' then
|
||||
receiving <= '1';
|
||||
sample_cnt_unary <= sample_cnt_unary(sample_cnt_unary'high-1 downto 0) & sample_cnt_unary(sample_cnt_unary'high);
|
||||
end if;
|
||||
|
||||
end if;
|
||||
|
||||
-- At half way shift in the data (LSB first) and shift (with rotation) the unary bit count
|
||||
if sample_cnt_unary(GEN_BIT_DIV/2 - 1) = '1' then
|
||||
data <= rx_data_i & data(data'high downto 1);
|
||||
end if;
|
||||
|
||||
-- After half way, up the bit count
|
||||
if sample_cnt_unary(GEN_BIT_DIV/2) = '1' then
|
||||
bit_cnt_unary <= bit_cnt_unary(bit_cnt_unary'high-1 downto 0) & bit_cnt_unary(bit_cnt_unary'high);
|
||||
end if;
|
||||
|
||||
-- Extract the payload bits from the input shift register
|
||||
data_out <= data(data_width downto 1);
|
||||
|
||||
-- If at the end of the last (stop) bit, update data out and set valid.
|
||||
-- Clear the receiving state.
|
||||
if sample_cnt_unary(GEN_BIT_DIV-1) = '1' and bit_cnt_unary(0) = '1' then
|
||||
|
||||
-- Data is valid if stop bit a 1
|
||||
data_out_valid <= data(data_width+1);
|
||||
|
||||
-- It is an error if the stop bit is 0
|
||||
rx_error <= not data(data_width+1);
|
||||
|
||||
-- Clear receiving flag
|
||||
receiving <= '0';
|
||||
end if;
|
||||
|
||||
end if;
|
||||
end process pRX;
|
||||
|
||||
end architecture rtl;
|
||||
|
|
@ -6,7 +6,7 @@
|
|||
-- Author : GMG
|
||||
-- Company : Global Inkjet Systems
|
||||
-- Created : 2017-08-29
|
||||
-- Last update: 2019-09-23
|
||||
-- Last update: 2019-09-26
|
||||
-- SVN ID : Git
|
||||
-- Standard : VHDL'2008
|
||||
-------------------------------------------------------------------------------
|
||||
|
|
@ -44,11 +44,14 @@ architecture behav of pof_tx_rx_1_tb is
|
|||
constant DISCR_THRES : natural := 1000;
|
||||
constant TIME_INT : time := 800 ns;
|
||||
|
||||
constant UART_BIT_DIV : std_logic_vector(3 downto 0) := "0110"; -- divide by 6
|
||||
constant UART_BIT_DIV : integer := 6; -- divide by 6
|
||||
|
||||
constant SYMBOL_LEN : natural := 8; -- UART symbol length, excluding
|
||||
-- start/stop and parity bits
|
||||
|
||||
-- Print-Start toggling period
|
||||
constant PS_SWITCH_PER : natural := 5000;
|
||||
|
||||
-- Logging Verbosity Level
|
||||
constant VERBOSITY_LEVEL : verb_level_t := VMEDIUM;
|
||||
|
||||
|
|
@ -59,7 +62,8 @@ architecture behav of pof_tx_rx_1_tb is
|
|||
signal init_tx, init_rx, dir_in, pd_in, inc_pos, dec_pos : std_logic;
|
||||
signal tx_data, rx_data, init_out, dir_out : std_logic;
|
||||
signal pd_out, inc_pos_out, dec_pos_out, end_of_swathe : std_logic;
|
||||
signal print_start, print_start_out : std_logic;
|
||||
signal print_start_in, print_start_out : std_logic;
|
||||
signal ps_flip_cnt : natural := 0;
|
||||
--
|
||||
signal test_completed, running, configuring : boolean;
|
||||
signal passed, failed, stimuli_completed : boolean;
|
||||
|
|
@ -76,7 +80,7 @@ architecture behav of pof_tx_rx_1_tb is
|
|||
signal pos_discr_cnt : integer;
|
||||
signal pd_in_cnt, pd_out_cnt : integer;
|
||||
signal enc_pulse_cnt : integer;
|
||||
signal dir_err, pd_err, ovfl_err : std_logic;
|
||||
signal dir_err, pd_err, ovfl_err, ps_err : std_logic;
|
||||
signal pos_err, enc_err, dir_in_d : std_logic;
|
||||
signal injected_errors : integer;
|
||||
signal max_pos, min_pos : integer;
|
||||
|
|
@ -116,7 +120,7 @@ begin -- architecture behav
|
|||
clk => clk,
|
||||
init => init_tx,
|
||||
pd_in => pd_in,
|
||||
print_start => '0',
|
||||
print_start => print_start_in,
|
||||
inc_pos => inc_pos,
|
||||
dec_pos => dec_pos,
|
||||
abs_position => abs_position,
|
||||
|
|
@ -129,6 +133,8 @@ begin -- architecture behav
|
|||
avs_readdata => avs_readdata_sl0);
|
||||
|
||||
iPOF_RX : entity work.pof_rx_1
|
||||
generic map(
|
||||
GEN_BIT_DIV => UART_BIT_DIV)
|
||||
port map(
|
||||
reset_n => reset_n,
|
||||
clk => clk,
|
||||
|
|
@ -142,7 +148,6 @@ begin -- architecture behav
|
|||
dec_pos => dec_pos_out,
|
||||
abs_pos => abs_pos_out,
|
||||
enable => enable_rx,
|
||||
bit_div => UART_BIT_DIV,
|
||||
error_rate_thres => error_rate_thres,
|
||||
one_pps => one_pps,
|
||||
max_error_flag => max_error_flag,
|
||||
|
|
@ -255,8 +260,20 @@ begin -- architecture behav
|
|||
|
||||
pSTIMULI_REGs : process(clk)
|
||||
begin
|
||||
if (clk = '1' and clk'event) then
|
||||
if(reset_n = '0') then
|
||||
abs_position_d <= (others => '0');
|
||||
print_start_in <= '0';
|
||||
ps_flip_cnt <= 0;
|
||||
elsif(clk = '1' and clk'event) then
|
||||
abs_position_d <= abs_position;
|
||||
if(running = true) then
|
||||
if(ps_flip_cnt = PS_SWITCH_PER-1) then
|
||||
ps_flip_cnt <= 0;
|
||||
print_start_in <= not print_start_in;
|
||||
else
|
||||
ps_flip_cnt <= ps_flip_cnt + 1;
|
||||
end if;
|
||||
end if;
|
||||
end if;
|
||||
end process pSTIMULI_REGs;
|
||||
|
||||
|
|
@ -520,6 +537,11 @@ begin -- architecture behav
|
|||
elsif (end_of_swathe = '1' and enc_pulse_cnt /= SWATHE_LEN) then
|
||||
enc_err <= '1';
|
||||
end if;
|
||||
if(reset_n = '0') then
|
||||
ps_err <= '0';
|
||||
elsif(running = true and ps_flip_cnt = integer(0.9*real(PS_SWITCH_PER)) and print_start_out /= print_start_in) then
|
||||
ps_err <= '1';
|
||||
end if;
|
||||
max_pos_d <= max_pos;
|
||||
min_pos_d <= min_pos;
|
||||
if ((dir_in = '0' and max_pos /= max_pos_d) or (dir_in = '1' and min_pos /= min_pos_d)) then
|
||||
|
|
@ -556,8 +578,7 @@ begin -- architecture behav
|
|||
if (reset_n = '0') then
|
||||
detected_error <= false;
|
||||
elsif (clk = '1' and clk'event) then
|
||||
--if(ovfl_err = '1' or dir_err = '1' or pd_err = '1' or pos_err = '1' or enc_err = '1') then
|
||||
if (ovfl_err = '1' or dir_err = '1' or pd_err = '1' or pos_err = '1') then
|
||||
if (ovfl_err = '1' or dir_err = '1' or pd_err = '1' or pos_err = '1' or ps_err = '1') then
|
||||
detected_error <= true;
|
||||
end if;
|
||||
end if;
|
||||
|
|
|
|||
|
|
@ -1,160 +0,0 @@
|
|||
-------------------------------------------------------------------------------
|
||||
-- Title : uart_regen
|
||||
-- Project : EMB-1
|
||||
-------------------------------------------------------------------------------
|
||||
-- File : uart_regen.vhd
|
||||
-- Author : Gianmarco Girau
|
||||
-- Company : Global Inkjet Systems
|
||||
-- Created : 2017-10-31
|
||||
-- Last update: 2019-09-24
|
||||
-- SVN ID : Git
|
||||
-- Standard : VHDL'08
|
||||
-------------------------------------------------------------------------------
|
||||
-- Description:
|
||||
-- Regenerate the UART signal
|
||||
-------------------------------------------------------------------------------
|
||||
-- altera vhdl_input_version vhdl_2008
|
||||
|
||||
library ieee;
|
||||
use ieee.std_logic_1164.all;
|
||||
use ieee.numeric_std.all;
|
||||
|
||||
entity uart_regen_1 is
|
||||
generic(
|
||||
data_width : natural range 1 to 31);
|
||||
port(
|
||||
reset_n : in std_logic;
|
||||
clk : in std_logic;
|
||||
bit_div : in std_logic_vector(3 downto 0); -- number of clock cycles per tx bit
|
||||
enable : in std_logic;
|
||||
bypass_en : in std_logic;
|
||||
uart_rx : in std_logic;
|
||||
uart_tx : out std_logic);
|
||||
end entity uart_regen_1;
|
||||
|
||||
architecture rtl of uart_regen_1 is
|
||||
|
||||
type fsm_state_t is (s_init, s_idle, s_regen);
|
||||
|
||||
signal fsm_state_curr, fsm_state_next : fsm_state_t;
|
||||
--
|
||||
signal uart_rx_i, ld_data, rst_bit_cnt, inc_bit_cnt : std_logic;
|
||||
signal rst_clk_cnt, end_of_bit, end_of_rx : std_logic;
|
||||
signal uart_regen, uart_regen_i : std_logic;
|
||||
--
|
||||
signal clk_cnt : std_logic_vector(3 downto 0);
|
||||
signal bit_cnt : std_logic_vector(5 downto 0);
|
||||
|
||||
begin
|
||||
|
||||
-----------------------------------------------------------------------------
|
||||
-- Input Synchronization
|
||||
-----------------------------------------------------------------------------
|
||||
|
||||
iSYNC_IN : entity work.sync_wire
|
||||
generic map(
|
||||
rst_val => '1',
|
||||
sync_stages => 3)
|
||||
port map(
|
||||
rstN => reset_n,
|
||||
clk => clk,
|
||||
async_in => uart_rx,
|
||||
sync_out => uart_rx_i);
|
||||
|
||||
-- NOTE : No NEED TO SYNCHRONIZE TO THE LOCAL CLOCK inputs enable, bypass_en
|
||||
-- and bit_biv BECAUSE THOSE SIGNALS ARE PREDOMINANTLY STATIC
|
||||
|
||||
-----------------------------------------------------------------------------
|
||||
-- UART registers and sequential logic
|
||||
-----------------------------------------------------------------------------
|
||||
|
||||
pREGs : process(clk)
|
||||
begin
|
||||
if (clk = '1' and clk'event) then
|
||||
if (rst_bit_cnt = '1') then
|
||||
bit_cnt <= (others => '0');
|
||||
elsif (inc_bit_cnt = '1') then
|
||||
bit_cnt <= std_logic_vector(unsigned(bit_cnt) + 1);
|
||||
end if;
|
||||
ld_data <= '0';
|
||||
if clk_cnt = ('0' & std_logic_vector(unsigned(bit_div(bit_div'high downto 1)) + 1)) then
|
||||
ld_data <= '1';
|
||||
end if;
|
||||
|
||||
if (rst_clk_cnt = '1' or end_of_bit = '1') then
|
||||
clk_cnt <= std_logic_vector(unsigned(bit_div) - 1);
|
||||
else
|
||||
clk_cnt <= std_logic_vector(unsigned(clk_cnt) - 1);
|
||||
end if;
|
||||
if (enable = '0') then
|
||||
uart_regen_i <= '1';
|
||||
elsif (ld_data = '1') then
|
||||
uart_regen_i <= uart_rx_i;
|
||||
end if;
|
||||
uart_regen <= uart_regen_i;
|
||||
end if;
|
||||
end process pREGs;
|
||||
|
||||
end_of_bit <= '1' when unsigned(clk_cnt) = 0 else '0';
|
||||
end_of_rx <= '1' when unsigned(bit_cnt) = data_width + 1 else '0';
|
||||
|
||||
-- output mux
|
||||
uart_tx <= uart_rx when bypass_en = '1' else uart_regen;
|
||||
|
||||
-----------------------------------------------------------------------------
|
||||
-- FSM
|
||||
-----------------------------------------------------------------------------
|
||||
|
||||
-- FSM state register
|
||||
pFSM_SR : process(clk)
|
||||
begin
|
||||
if (clk = '1' and clk'event) then
|
||||
if (enable = '0' or bypass_en = '1') then
|
||||
fsm_state_curr <= s_init;
|
||||
else
|
||||
fsm_state_curr <= fsm_state_next;
|
||||
end if;
|
||||
end if;
|
||||
end process pFSM_SR;
|
||||
|
||||
-- FSM Combinational Logic
|
||||
pFSM_CL : process(fsm_state_curr, uart_rx_i, end_of_bit, end_of_rx, clk_cnt, bit_div)
|
||||
begin
|
||||
--default assignments
|
||||
rst_clk_cnt <= '0';
|
||||
rst_bit_cnt <= '0';
|
||||
inc_bit_cnt <= '0';
|
||||
--
|
||||
fsm_state_next <= fsm_state_curr;
|
||||
|
||||
case fsm_state_curr is
|
||||
when s_init =>
|
||||
if (uart_rx_i = '1') then
|
||||
fsm_state_next <= s_idle;
|
||||
end if;
|
||||
|
||||
when s_idle =>
|
||||
if (uart_rx_i = '0') then
|
||||
rst_clk_cnt <= '1';
|
||||
rst_bit_cnt <= '1';
|
||||
fsm_state_next <= s_regen;
|
||||
end if;
|
||||
|
||||
when s_regen =>
|
||||
|
||||
if (end_of_bit = '1') then
|
||||
inc_bit_cnt <= '1';
|
||||
if (end_of_rx = '1') then
|
||||
if (uart_rx_i = '1') then
|
||||
fsm_state_next <= s_idle;
|
||||
else
|
||||
fsm_state_next <= s_init;
|
||||
end if;
|
||||
end if;
|
||||
end if;
|
||||
|
||||
end case;
|
||||
end process pFSM_CL;
|
||||
|
||||
|
||||
end architecture rtl;
|
||||
|
|
@ -1,186 +0,0 @@
|
|||
-------------------------------------------------------------------------------
|
||||
-- Title : uart_rx
|
||||
-- Project : EMB-1
|
||||
-------------------------------------------------------------------------------
|
||||
-- File : uart_rx.vhd
|
||||
-- Author : Gianmarco Girau
|
||||
-- Company : Global Inkjet Systems
|
||||
-- Created : 2016-10-24
|
||||
-- Last update: 2019-09-20
|
||||
-- SVN ID : Git
|
||||
-- Standard : VHDL'08
|
||||
-------------------------------------------------------------------------------
|
||||
-- Description:
|
||||
-- Simple UART receiver, used to receive data over the POF, 1 start, 1 stop
|
||||
-- bit, no parity
|
||||
-------------------------------------------------------------------------------
|
||||
-- altera vhdl_input_version vhdl_2008
|
||||
|
||||
library ieee;
|
||||
use ieee.std_logic_1164.all;
|
||||
use ieee.numeric_std.all;
|
||||
|
||||
entity uart_rx_1 is
|
||||
generic(
|
||||
data_width : natural range 1 to 31);
|
||||
port(
|
||||
reset_n : in std_logic;
|
||||
clk : in std_logic;
|
||||
bit_div : in std_logic_vector(3 downto 0); -- number of clock cycles per tx bit
|
||||
init : in std_logic;
|
||||
data_out : out std_logic_vector(data_width - 1 downto 0);
|
||||
data_out_valid : out std_logic;
|
||||
rx_error : out std_logic;
|
||||
rx_data : in std_logic);
|
||||
end entity uart_rx_1;
|
||||
|
||||
architecture rtl of uart_rx_1 is
|
||||
|
||||
type fsm_state_t is (s_init, s_idle, s_get_start_bit, s_get_data, s_get_stop_bit);
|
||||
|
||||
signal fsm_state_curr, fsm_state_next : fsm_state_t;
|
||||
--
|
||||
signal rx_data_i, rst_bit_cnt, inc_bit_cnt : std_logic;
|
||||
signal rst_clk_cnt, end_of_rx, data_valid : std_logic;
|
||||
signal stop_bit, rx_error_i : std_logic;
|
||||
--
|
||||
signal data : std_logic_vector(data_width - 1 downto 0);
|
||||
signal bit_cnt : std_logic_vector(5 downto 0);
|
||||
|
||||
-- avoid maths with loadable shift registers
|
||||
-- bit_div will be used to set an indexed bit of the timer shift register
|
||||
-- the timers will shift down towards zeroth bit which will indicate timer has completed.
|
||||
-- this should be faster than using a decrementer and comparators
|
||||
signal uart_bit_timer, uart_bit_sample_timer : std_logic_vector(2**bit_div'length - 1 downto 0);
|
||||
signal uart_bit_timer_load_value, uart_bit_sample_timer_load_value : std_logic_vector(2**bit_div'length - 1 downto 0);
|
||||
|
||||
signal end_of_bit : std_logic;
|
||||
signal shf_data : std_logic;
|
||||
|
||||
begin
|
||||
|
||||
-----------------------------------------------------------------------------
|
||||
-- Input Synchronization
|
||||
-----------------------------------------------------------------------------
|
||||
|
||||
iSYNC_IN : entity work.sync_wire
|
||||
generic map(
|
||||
rst_val => '1',
|
||||
sync_stages => 3)
|
||||
port map(
|
||||
rstN => reset_n,
|
||||
clk => clk,
|
||||
async_in => rx_data,
|
||||
sync_out => rx_data_i);
|
||||
|
||||
-----------------------------------------------------------------------------
|
||||
-- UART registers and sequential logic
|
||||
-----------------------------------------------------------------------------
|
||||
|
||||
pREGs : process(clk)
|
||||
begin
|
||||
if (clk = '1' and clk'event) then
|
||||
if (rst_bit_cnt = '1') then
|
||||
bit_cnt <= (others => '0');
|
||||
elsif (inc_bit_cnt = '1') then
|
||||
bit_cnt <= std_logic_vector(unsigned(bit_cnt) + 1);
|
||||
end if;
|
||||
if (rst_clk_cnt = '1' or end_of_bit = '1') then
|
||||
uart_bit_timer <= uart_bit_timer_load_value;
|
||||
uart_bit_sample_timer <= uart_bit_sample_timer_load_value;
|
||||
else
|
||||
uart_bit_timer <= '0' & uart_bit_timer(uart_bit_timer'high downto 1);
|
||||
uart_bit_sample_timer <= '0' & uart_bit_sample_timer(uart_bit_sample_timer'high downto 1);
|
||||
end if;
|
||||
if (shf_data = '1') then
|
||||
data <= rx_data_i & data(data'high downto 1);
|
||||
end if;
|
||||
data_out_valid <= data_valid;
|
||||
if (data_valid = '1') then
|
||||
data_out <= data;
|
||||
end if;
|
||||
rx_error <= rx_error_i;
|
||||
uart_bit_timer_load_value <= (others => '0');
|
||||
uart_bit_timer_load_value(to_integer(unsigned(bit_div) -1 )) <= '1';
|
||||
uart_bit_sample_timer_load_value <= (others => '0');
|
||||
uart_bit_sample_timer_load_value(to_integer( unsigned(bit_div(bit_div'high downto 1)) -1)) <= '1';
|
||||
end if;
|
||||
end process pREGs;
|
||||
|
||||
shf_data <= uart_bit_sample_timer(0) and not stop_bit;
|
||||
end_of_bit <= uart_bit_timer(0);
|
||||
end_of_rx <= '1' when unsigned(bit_cnt) = data_width else '0';
|
||||
|
||||
-----------------------------------------------------------------------------
|
||||
-- FSM
|
||||
-----------------------------------------------------------------------------
|
||||
|
||||
-- FSM state register
|
||||
pFSM_SR : process(clk)
|
||||
begin
|
||||
if (clk = '1' and clk'event) then
|
||||
if (init = '1') then
|
||||
fsm_state_curr <= s_init;
|
||||
else
|
||||
fsm_state_curr <= fsm_state_next;
|
||||
end if;
|
||||
end if;
|
||||
end process pFSM_SR;
|
||||
|
||||
-- FSM Combinational Logic
|
||||
pFSM_CL : process(all)
|
||||
begin
|
||||
--default assignments
|
||||
rst_clk_cnt <= '0';
|
||||
rst_bit_cnt <= '0';
|
||||
inc_bit_cnt <= '0';
|
||||
data_valid <= '0';
|
||||
stop_bit <= '0';
|
||||
rx_error_i <= '0';
|
||||
--
|
||||
fsm_state_next <= fsm_state_curr;
|
||||
|
||||
case fsm_state_curr is
|
||||
when s_init =>
|
||||
if (rx_data_i = '1') then
|
||||
fsm_state_next <= s_idle;
|
||||
end if;
|
||||
|
||||
when s_idle =>
|
||||
if (rx_data_i = '0') then
|
||||
rst_clk_cnt <= '1';
|
||||
rst_bit_cnt <= '1';
|
||||
fsm_state_next <= s_get_start_bit;
|
||||
end if;
|
||||
|
||||
when s_get_start_bit =>
|
||||
if (end_of_bit = '1') then
|
||||
inc_bit_cnt <= '1';
|
||||
fsm_state_next <= s_get_data;
|
||||
end if;
|
||||
|
||||
when s_get_data =>
|
||||
if (end_of_bit = '1') then
|
||||
inc_bit_cnt <= '1';
|
||||
if (end_of_rx = '1') then
|
||||
fsm_state_next <= s_get_stop_bit;
|
||||
end if;
|
||||
end if;
|
||||
|
||||
when s_get_stop_bit =>
|
||||
stop_bit <= '1';
|
||||
if (end_of_bit = '1') then
|
||||
if (rx_data_i = '1') then
|
||||
data_valid <= '1';
|
||||
fsm_state_next <= s_idle;
|
||||
else
|
||||
rx_error_i <= '1';
|
||||
fsm_state_next <= s_init;
|
||||
end if;
|
||||
end if;
|
||||
|
||||
end case;
|
||||
end process pFSM_CL;
|
||||
|
||||
|
||||
end architecture rtl;
|
||||
Loading…
Add table
Add a link
Reference in a new issue