diff --git a/hdl/fpga/platforms/bladerf-micro/modelsim/fx3_gpif_meta_tb.do b/hdl/fpga/platforms/bladerf-micro/modelsim/fx3_gpif_meta_tb.do new file mode 100644 index 00000000..952f847e --- /dev/null +++ b/hdl/fpga/platforms/bladerf-micro/modelsim/fx3_gpif_meta_tb.do @@ -0,0 +1,12 @@ +source ../../../ip/nuand/nuand.do + +vcom -work nuand -2008 ../vhdl/rx.vhd +vcom -work nuand -2008 ../vhdl/tx.vhd + +vlib rtl_work +vcom -work rtl_work -2008 ../../../ip/altera/fx3_pll/fx3_pll.vhd + +compile_nuand ../../../ip/nuand bladerf-micro + +vcom -work nuand -2008 ../vhdl/tb/fx3_model.vhd +vcom -work nuand -2008 ../vhdl/tb/fx3_gpif_meta_tb.vhd diff --git a/hdl/fpga/platforms/bladerf-micro/vhdl/tb/fx3_gpif_meta_tb.vhd b/hdl/fpga/platforms/bladerf-micro/vhdl/tb/fx3_gpif_meta_tb.vhd new file mode 100644 index 00000000..c94cef1c --- /dev/null +++ b/hdl/fpga/platforms/bladerf-micro/vhdl/tb/fx3_gpif_meta_tb.vhd @@ -0,0 +1,793 @@ +-- Copyright (c) 2022 Nuand LLC +-- +-- Permission is hereby granted, free of charge, to any person obtaining a copy +-- of this software and associated documentation files (the "Software"), to deal +-- in the Software without restriction, including without limitation the rights +-- to use, copy, modify, merge, publish, distribute, sublicense, and/or sell +-- copies of the Software, and to permit persons to whom the Software is +-- furnished to do so, subject to the following conditions: +-- +-- The above copyright notice and this permission notice shall be included in +-- all copies or substantial portions of the Software. +-- +-- THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +-- IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +-- FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE +-- AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER +-- LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, +-- OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN +-- THE SOFTWARE. + +library ieee; + use ieee.std_logic_1164.all; + use ieee.numeric_std.all; + +library rtl_work; + +library altera_lnsim; + use altera_lnsim.altera_pll; + +library nuand; + use nuand.util.all ; + use nuand.fifo_readwrite_p.all; + use nuand.common_dcfifo_p.all; + use nuand.bladerf_p.all; + +entity fx3_gpif_meta_tb is + generic ( + -- For bladeRF2 (2x2 MIMO): + NUM_MIMO_STREAMS : natural := 2; + FIFO_READER_READ_THROTTLE : natural := 0; + + ENABLE_CHANNEL_0 : std_logic := '1'; + ENABLE_CHANNEL_1 : std_logic := '0' + ); +end entity; + +architecture arch of fx3_gpif_meta_tb is + + -- bladerf-hosted uses ad9361.clock (125 MHz) for rx_clock and tx_clock + constant SYSCLK_HALF_PERIOD : time := 1 sec * (1.0/125.0e6/2.0); + + -- For reasons unknown, simulation of this system in ModelSim requires that + -- wrreq and data be asserted shortly before the rising clock edge. Sigh... + constant FIFO_WORKAROUND : time := 1 ps; + + type fx3_control_t is record + usb_speed : std_logic; + tx_enable : std_logic; + rx_enable : std_logic; + meta_enable : std_logic; + packet : std_logic; + end record; + + type fx3_gpif_t is record + gpif_in : std_logic_vector(31 downto 0); + gpif_out : std_logic_vector(31 downto 0); + gpif_oe : std_logic; + ctl_in : std_logic_vector(12 downto 0); + ctl_out : std_logic_vector(12 downto 0); + ctl_oe : std_logic_vector(12 downto 0); + end record; + + signal sys_rst : std_logic := '1'; + signal done : boolean := false; + + signal fx3_pclk : std_logic := '1'; + signal fx3_pclk_pll : std_logic := '1'; + signal sys_clk : std_logic := '1'; + + signal pll_reset : std_logic := '0'; + signal pll_locked : std_logic := '0'; + signal fx3_control : fx3_control_t; + signal fx3_gpif : fx3_gpif_t; + signal fx3_gpif_i : std_logic_vector(31 downto 0); + signal fx3_ctl_i : std_logic_vector(12 downto 0); + + -- Control mapping + alias dma0_rx_ack is fx3_ctl_i( 0); + alias dma1_rx_ack is fx3_ctl_i( 1); + alias dma2_tx_ack is fx3_ctl_i( 2); + alias dma3_tx_ack is fx3_ctl_i( 3); + alias dma_rx_enable is fx3_ctl_i( 4); + alias dma_tx_enable is fx3_ctl_i( 5); + alias dma_idle is fx3_ctl_i( 6); + alias system_reset is fx3_ctl_i( 7); + alias dma0_rx_reqx is fx3_ctl_i( 8); + alias dma1_rx_reqx is fx3_ctl_i(12); -- due to 9 being connected to dclk + alias dma2_tx_reqx is fx3_ctl_i(10); + alias dma3_tx_reqx is fx3_ctl_i(11); + + signal loopback_i : signed(15 downto 0) := (others =>'0'); + signal loopback_q : signed(15 downto 0) := (others =>'0'); + signal loopback_valid : std_logic := '0'; + signal loopback_enabled : std_logic := '0'; + + signal tx_clock : std_logic := '1' ; + signal rx_clock : std_logic := '1' ; + + signal rx_sample_fifo : rx_fifo_t := RX_FIFO_T_DEFAULT; + signal tx_sample_fifo : tx_fifo_t := TX_FIFO_T_DEFAULT; + signal loopback_fifo : loopback_fifo_t := LOOPBACK_FIFO_T_DEFAULT; + signal rx_meta_fifo : meta_fifo_rx_t := META_FIFO_RX_T_DEFAULT; + signal tx_meta_fifo : meta_fifo_tx_t := META_FIFO_TX_T_DEFAULT; + + signal rx_mux_i : signed(15 downto 0); + signal rx_mux_q : signed(15 downto 0); + signal rx_mux_valid : std_logic; + + signal tx_timestamp : unsigned(63 downto 0) := ( others => '0' ); + signal rx_timestamp : unsigned(63 downto 0) := ( others => '0' ); + + constant FX3_HALF_PERIOD : time := 1.0/(100.0e6)/2.0*1 sec ; + constant TX_HALF_PERIOD : time := 1.0/(9.0e6)/2.0*1 sec ; + constant RX_HALF_PERIOD : time := 1.0/(9.0e6)/2.0*1 sec ; + + signal dac_controls : sample_controls_t(0 to NUM_MIMO_STREAMS-1) := (others => SAMPLE_CONTROL_DISABLE); + signal dac_streams : sample_streams_t(dac_controls'range) := (others => ZERO_SAMPLE); + signal adc_controls : sample_controls_t(0 to NUM_MIMO_STREAMS-1) := (others => SAMPLE_CONTROL_DISABLE); + signal adc_streams : sample_streams_t(adc_controls'range) := (others => ZERO_SAMPLE); + + signal tx_reset : std_logic := '0'; + signal tx_ts_reset : std_logic := '0'; + signal rx_reset : std_logic := '0'; + signal rx_ts_reset : std_logic := '0'; + + signal meta_en_tx : std_logic := '0'; + signal meta_en_rx : std_logic := '0'; + + signal rx_packet_control : packet_control_t := PACKET_CONTROL_DEFAULT; + signal tx_packet_control : packet_control_t; + + signal trigger_signal_sync_tb : std_logic; + signal adc_stream_val_at_rx_enable : signed(15 downto 0) := ( others => '0' ); + + function data_gen (count : natural) return std_logic_vector is + variable msw, lsw : std_logic_vector(15 downto 0); + begin + msw := std_logic_vector(to_signed(count, 16)); + lsw := std_logic_vector(to_signed(-count, 16)); + + return (msw & lsw); + end function data_gen; + + signal rx_packet_ready : std_logic; + +begin + + -- ======================================================================== + -- Brief summary of data flow + -- ======================================================================== + -- + -- Simulated samples flow from fx3_model's TX side to its RX side. The + -- validity of the data is checked there. + -- + -- entity U_fx3_model FX3 model, TX process + -- signal fx3_gpif_i fx3_gpif.gpif_oe is '0' + -- process register_gpif + -- signal fx3_gpif.gpif_in Demuxed GPIF interface (FX3 -> FPGA) + -- entity U_fx3_gpif GPIF implementation, write side + -- signal tx_sample_fifo.w* TX fifo, write side + -- entity U_tx_sample_fifo + -- signal tx_sample_fifo.r* TX fifo, read side + -- process tx_mux + -- signal loopback_fifo.w* Loopback fifo, write side + -- entity U_rx_loopback_fifo + -- signal loopback_fifo.r* Loopback fifo, read side + -- process loopback_fifo_control + -- signal loopback_{i,q,valid} + -- process rx_mux + -- signal rx_mux_{i,q,valid} + -- entity U_fifo_writer + -- signal rx_sample_fifo.w* RX fifo, write side + -- entity U_rx_sample_fifo + -- signal rx_sample_fifo.r* RX fifo, read side + -- entity U_fx3_gpif GPIF implementation, read side + -- signal fx3_gpif.gpif_out Demuxed GPIF interface (FPGA -> FX3) + -- process register_gpif + -- signal fx3_gpif_i fx3_gpif.gpif_oe is '1' + -- entity U_fx3_model FX3 model, RX process + + + -- ======================================================================== + -- Instantiations + -- ======================================================================== + + -- Unit under test + -- Clock domain: fx3_pclk_pll + U_fx3_gpif : entity nuand.fx3_gpif + port map ( + pclk => fx3_pclk_pll, + reset => sys_rst, + usb_speed => fx3_control.usb_speed, + gpif_in => fx3_gpif.gpif_in, + gpif_out => fx3_gpif.gpif_out, + gpif_oe => fx3_gpif.gpif_oe, + ctl_in => fx3_gpif.ctl_in, + ctl_out => fx3_gpif.ctl_out, + ctl_oe => fx3_gpif.ctl_oe, + tx_enable => fx3_control.tx_enable, + rx_enable => fx3_control.rx_enable, + meta_enable => fx3_control.meta_enable, + packet_enable => fx3_control.packet, + tx_fifo_write => tx_sample_fifo.wreq, + tx_fifo_full => tx_sample_fifo.wfull, + tx_fifo_empty => tx_sample_fifo.wempty, + tx_fifo_usedw => tx_sample_fifo.wused, + tx_fifo_data => tx_sample_fifo.wdata, + tx_timestamp => tx_timestamp, + tx_meta_fifo_write => tx_meta_fifo.wreq, + tx_meta_fifo_full => tx_meta_fifo.wfull, + tx_meta_fifo_empty => tx_meta_fifo.wempty, + tx_meta_fifo_usedw => tx_meta_fifo.wused, + tx_meta_fifo_data => tx_meta_fifo.wdata, + rx_fifo_read => rx_sample_fifo.rreq, + rx_fifo_full => rx_sample_fifo.rfull, + rx_fifo_empty => rx_sample_fifo.rempty, + rx_fifo_usedw => rx_sample_fifo.rused, + rx_fifo_data => rx_sample_fifo.rdata, + rx_meta_fifo_read => rx_meta_fifo.rreq, + rx_meta_fifo_full => rx_meta_fifo.rfull, + rx_meta_fifo_empty => rx_meta_fifo.rempty, + rx_meta_fifo_usedr => rx_meta_fifo.rused, + rx_meta_fifo_data => rx_meta_fifo.rdata + ); + + -- Discrete control signals for fx3_gpif + fx3_control.usb_speed <= '0'; + fx3_control.meta_enable <= '1'; + fx3_control.packet <= '0'; + + U_pkt_gen : entity nuand.rx_packet_generator + port map( + rx_clock => rx_clock, + rx_reset => rx_reset, + + rx_enable => fx3_control.rx_enable, + rx_packet_enable => fx3_control.packet, + + rx_packet_ready => rx_packet_ready, + + rx_packet_control => rx_packet_control + + ); + + + meta_en_tx <= fx3_control.meta_enable; + meta_en_rx <= fx3_control.meta_enable; + + increment_tx_ts : process(tx_clock) + variable ping : boolean := true ; + begin + if( rising_edge(tx_clock) ) then + ping := not ping ; + if( ping = true ) then + tx_timestamp <= tx_timestamp + 1 ; + end if ; + end if ; + end process ; + + increment_rx_ts : process(rx_clock) + variable ping : boolean := true ; + begin + if( rising_edge(rx_clock) ) then + ping := not ping ; + if( ping = true ) then + rx_timestamp <= rx_timestamp + 1 ; + end if ; + end if ; + end process ; + + -- Model of FX3's GPIF interface + -- Clock domain: fx3_pclk (source) + U_fx3_model : entity nuand.fx3_model(micro_dma) + port map ( + fx3_pclk => fx3_pclk, + fx3_gpif => fx3_gpif_i, + fx3_ctl => fx3_ctl_i, + fx3_uart_rxd => '0', + fx3_uart_txd => open, + fx3_uart_cts => open, + fx3_rx_en => '1', + fx3_rx_meta_en => meta_en_rx, + fx3_tx_en => '1', + fx3_tx_meta_en => meta_en_tx, + done => done + ); + + -- Generate phase-shifted PLL clock + U_fx3_pll : entity rtl_work.fx3_pll + port map ( + inclk0 => fx3_pclk, + areset => pll_reset, + c0 => fx3_pclk_pll, + locked => pll_locked + ); + + tx_clock <= not tx_clock after TX_HALF_PERIOD ; + rx_clock <= not rx_clock after RX_HALF_PERIOD ; + + + -- Reset handler + sys_rst <= '0' after 100 ns; + + -- Generate system clock + sys_clk <= not sys_clk after SYSCLK_HALF_PERIOD when not done else '0'; + + + tx_reset <= sys_rst; + tx_ts_reset <= sys_rst; + rx_reset <= sys_rst; + rx_ts_reset <= sys_rst; + + meta_en_tx <= fx3_control.meta_enable; + meta_en_rx <= fx3_control.meta_enable; + + -- TX Submodule + U_tx : entity work.tx + generic map ( + NUM_STREAMS => dac_controls'length + ) + port map ( + tx_reset => tx_reset, + tx_clock => tx_clock, + tx_enable => fx3_control.tx_enable, + + meta_en => meta_en_tx, + timestamp_reset => tx_ts_reset, + usb_speed => fx3_control.usb_speed, + tx_underflow_led => open, + tx_timestamp => tx_timestamp, + + -- Triggering + trigger_arm => '0', + trigger_fire => '0', + trigger_master => '0', + trigger_line => open, + + -- Packet FIFO + packet_en => fx3_control.packet, + packet_empty => open, + packet_control => tx_packet_control, + packet_ready => '1', + + -- Samples from host via FX3 + sample_fifo_wclock => fx3_pclk_pll, + sample_fifo_wreq => tx_sample_fifo.wreq, + sample_fifo_wdata => tx_sample_fifo.wdata, + sample_fifo_wempty => tx_sample_fifo.wempty, + sample_fifo_wfull => tx_sample_fifo.wfull, + sample_fifo_wused => tx_sample_fifo.wused, + + -- Metadata from host via FX3 + meta_fifo_wclock => fx3_pclk_pll, + meta_fifo_wreq => tx_meta_fifo.wreq, + meta_fifo_wdata => tx_meta_fifo.wdata, + meta_fifo_wempty => tx_meta_fifo.wempty, + meta_fifo_wfull => tx_meta_fifo.wfull, + meta_fifo_wused => tx_meta_fifo.wused, + + -- Digital Loopback Interface + loopback_enabled => '0', + loopback_fifo_wdata => loopback_fifo.wdata, + loopback_fifo_wreq => loopback_fifo.wreq, + loopback_fifo_wfull => loopback_fifo.wfull, + loopback_fifo_wused => loopback_fifo.wused, + + -- RFFE Interface + dac_controls => dac_controls, + dac_streams => dac_streams + ); + + -- RX Submodule + U_rx : entity work.rx + generic map ( + NUM_STREAMS => adc_controls'length + ) + port map ( + rx_reset => rx_reset, + rx_clock => rx_clock, + rx_enable => fx3_control.rx_enable, + + meta_en => meta_en_rx, + timestamp_reset => rx_ts_reset, + usb_speed => fx3_control.usb_speed, + rx_mux_sel => to_unsigned(0, 3), + rx_overflow_led => open, + rx_timestamp => rx_timestamp, + + -- Triggering + trigger_arm => '0', + trigger_fire => '0', + trigger_master => '0', + trigger_line => open, + trigger_signal_sync_tb => trigger_signal_sync_tb, + + -- Packet FIFO + packet_en => fx3_control.packet, + packet_control => rx_packet_control, + packet_ready => rx_packet_ready, + + -- Samples to host via FX3 + sample_fifo_rclock => fx3_pclk_pll, + sample_fifo_raclr => not fx3_control.rx_enable, + sample_fifo_rreq => rx_sample_fifo.rreq, + sample_fifo_rdata => rx_sample_fifo.rdata, + sample_fifo_rempty => rx_sample_fifo.rempty, + sample_fifo_rfull => rx_sample_fifo.rfull, + sample_fifo_rused => rx_sample_fifo.rused, + + -- Mini expansion signals + mini_exp => "00", + + -- Metadata to host via FX3 + meta_fifo_rclock => fx3_pclk_pll, + meta_fifo_raclr => not fx3_control.rx_enable, + meta_fifo_rreq => rx_meta_fifo.rreq, + meta_fifo_rdata => rx_meta_fifo.rdata, + meta_fifo_rempty => rx_meta_fifo.rempty, + meta_fifo_rfull => rx_meta_fifo.rfull, + meta_fifo_rused => rx_meta_fifo.rused, + + -- Digital Loopback Interface + loopback_fifo_wenabled => open, + loopback_fifo_wreset => tx_reset, + loopback_fifo_wclock => tx_clock, + loopback_fifo_wdata => loopback_fifo.wdata, + loopback_fifo_wreq => loopback_fifo.wreq, + loopback_fifo_wfull => loopback_fifo.wfull, + loopback_fifo_wused => loopback_fifo.wused, + + -- RFFE Interface + adc_controls => adc_controls, + adc_streams => adc_streams + ); + + -- ======================================================================== + -- Data converters + -- ======================================================================== + + gen_dac_controls : if( NUM_MIMO_STREAMS > 1 ) generate + -- The TX side of the AD9361 HDL is a FIFO pull interface + -- that expects a readahead FIFO. It toggles the data request + -- signal every other cycle. This behavior is mimicked here. + process( tx_clock, sys_rst ) + begin + if( sys_rst = '1' ) then + dac_controls <= ( + 0 => (enable => ENABLE_CHANNEL_0, data_req => '1'), + 1 => (enable => ENABLE_CHANNEL_1, data_req => '1') + ); + elsif( rising_edge(tx_clock) ) then + for i in dac_controls'range loop + dac_controls(i) <= ( + enable => dac_controls(i).enable, + data_req => not dac_controls(i).data_req ); + end loop; + end if; + end process; + else generate + dac_controls <= (others => SAMPLE_CONTROL_ENABLE); + end generate; + + gen_adc_controls : if( NUM_MIMO_STREAMS > 1 ) generate + process( rx_clock, sys_rst ) + constant COUNT_RESET : integer := 0; + variable count : integer range -2047 to 2047 := COUNT_RESET; + begin + if( sys_rst = '1' ) then + count := COUNT_RESET; + adc_controls <= ( + 0 => (enable => ENABLE_CHANNEL_0, data_req => '1'), + 1 => (enable => ENABLE_CHANNEL_1, data_req => '1') + ); + elsif( rising_edge(rx_clock) ) then + for i in adc_controls'range loop + adc_controls(i) <= ( + enable => adc_controls(i).enable, + data_req => not adc_controls(i).data_req ); + if( adc_controls(i).enable = '1') then + if( adc_streams(i).data_v = '1' ) then + adc_streams(i).data_i <= to_signed(count, 16); + adc_streams(i).data_q <= to_signed(-count, 16); + if( count < 2047 ) then + count := count + 1; + else + count := COUNT_RESET; + end if; + end if; + adc_streams(i).data_v <= not adc_streams(i).data_v; + end if; + end loop; + end if; + end process; + else generate + adc_controls <= (others => SAMPLE_CONTROL_ENABLE); + end generate; + + -- ======================================================================== + -- Processes + -- ======================================================================== + + -- FX3 GPIF bidirectional signal control + -- Adapted from same process in bladerf-hosted.vhd + register_gpif : process(sys_rst, fx3_pclk_pll) + begin + if( sys_rst = '1' ) then + fx3_gpif_i <= (others => 'Z'); + fx3_gpif.gpif_in <= (others => 'Z'); + elsif( rising_edge(fx3_pclk_pll) ) then + fx3_gpif.gpif_in <= fx3_gpif_i; + + if( fx3_gpif.gpif_oe = '1' ) then + fx3_gpif_i <= fx3_gpif.gpif_out; + else + fx3_gpif_i <= (others =>'Z'); + end if; + end if; + end process; + + -- FX3 CTL bidirectional signals + -- Adapted from same generator in bladerf-hosted.vhd + generate_ctl : for i in fx3_ctl_i'range generate + fx3_ctl_i(i) <= fx3_gpif.ctl_out(i) when fx3_gpif.ctl_oe(i) = '1' else 'Z'; + end generate; + + fx3_gpif.ctl_in <= fx3_ctl_i; + + -- Controller for loopback FIFO + -- Stripped-down version of same process from rx.vhd + loopback_fifo_control : process( sys_rst, loopback_fifo.rclock ) + begin + if( sys_rst = '1' ) then + loopback_enabled <= '0'; + loopback_fifo.rreq <= '0'; + loopback_i <= (others => '0'); + loopback_q <= (others => '0'); + loopback_valid <= '0'; + elsif( rising_edge(loopback_fifo.rclock) ) then + loopback_enabled <= '0'; + loopback_fifo.rreq <= '0'; + loopback_i <= loopback_i; + loopback_q <= loopback_q; + loopback_valid <= '0'; + + -- Is loopback enabled? + loopback_enabled <= fx3_control.rx_enable; + + -- Do the loopback + loopback_i <= resize(signed(loopback_fifo.rdata(15 downto 0)), loopback_i'length); + loopback_q <= resize(signed(loopback_fifo.rdata(31 downto 16)), loopback_q'length); + loopback_valid <= loopback_fifo.rreq and not loopback_fifo.rempty; + + -- Read from the FIFO if req'd + loopback_fifo.rreq <= loopback_enabled and (not loopback_fifo.rempty); + end if; + end process; + + -- RX multiplexer + -- Stripped-down version of same process from rx.vhd + rx_mux : process(sys_rst, sys_clk) + begin + if( sys_rst = '1' ) then + rx_mux_i <= (others =>'0'); + rx_mux_q <= (others =>'0'); + rx_mux_valid <= '0'; + elsif( rising_edge(sys_clk) ) then + rx_mux_i <= loopback_i; + rx_mux_q <= loopback_q; + rx_mux_valid <= loopback_valid; + end if; + end process; + + -- TX multiplexer + -- Stripped-down version of mimo_channel_sel_mux from tx.vhd + --tx_mux : process( sys_clk ) + --begin + -- if( rising_edge(sys_clk) ) then + -- tx_sample_fifo.rreq <= not tx_sample_fifo.rempty; + + -- loopback_fifo.wdata <= tx_sample_fifo.rdata; + -- loopback_fifo.wreq <= tx_sample_fifo.rreq and not tx_sample_fifo.rempty; + -- end if; + --end process; + + + -- ======================================================================== + -- Verification + -- ======================================================================== + + -- + -- Check for metavalues + -- We should never see metavalues written to the FIFOs + -- + check_fifo_write : process(fx3_pclk_pll) is + begin + if( rising_edge(fx3_pclk_pll) ) then + if( tx_sample_fifo.wreq = '1' and fx3_control.meta_enable = '0' ) then + for i in tx_sample_fifo.wdata'range loop + assert tx_sample_fifo.wdata(i) = '0' or tx_sample_fifo.wdata(i) = '1' + severity failure; + end loop; + end if; + end if; + end process; + + check_fifo_read : process(fx3_pclk_pll) is + begin + if( rising_edge(fx3_pclk_pll) ) then + if( rx_sample_fifo.rreq = '1' ) then + for i in rx_sample_fifo.rdata'range loop + assert rx_sample_fifo.rdata(i) = '0' or rx_sample_fifo.rdata(i) = '1' + severity failure; + end loop; + end if; + end if; + end process check_fifo_read; + + -- + -- Check for fullness on FIFOs + -- + assert(rx_sample_fifo.wfull = '0') report "rx_sample_fifo full (write)" severity warning; + assert(tx_sample_fifo.wfull = '0') report "tx_sample_fifo full (write)" severity warning; + assert(loopback_fifo.wfull = '0') report "loopback_fifo full (write)" severity warning; + + -- + -- Tx Sample Check + -- + tx_sample_start_check: process + type time_state_t is ( + WAIT_FOR_HEADER_TIMESTAMP, + WAIT_FOR_SAMPLE + ); + variable state : time_state_t := WAIT_FOR_HEADER_TIMESTAMP; + variable timestamp_in_header : unsigned (31 downto 0) := (others => '0'); + begin + case state is + when WAIT_FOR_HEADER_TIMESTAMP => + wait until rising_edge(dma3_tx_reqx); + if( fx3_control.meta_enable = '1' ) then + wait until rising_edge(fx3_pclk); + wait until rising_edge(fx3_pclk); + report "Timestamp: 0x" & to_hstring(fx3_gpif_i); + timestamp_in_header := unsigned(fx3_gpif_i); + report "Timestamp Saved: " & to_string(to_integer(timestamp_in_header)); + end if; + state := WAIT_FOR_SAMPLE; + + when WAIT_FOR_SAMPLE => + while( timestamp_in_header /= tx_timestamp ) loop + assert(tx_timestamp < timestamp_in_header) + report "Header timestamp is in the past. Samples " & + "usually ignored but considered a failure in tb." + severity failure; + for i in dac_controls'range loop + assert(dac_streams(i).data_v = '0') + report "Dac_stream("&to_string(i)&") data being transmitted before expected tx_timestamp." + severity failure; + end loop; + wait until rising_edge(tx_clock); + end loop; + report "TX TIMESTAMP = META TIMESTAMP"; + + wait until rising_edge(tx_clock); + for i in dac_controls'range loop + if( dac_controls(i).enable = '1') then + assert(dac_streams(i).data_v = '1') + report "Dac_stream("&to_string(i)&") sample not seen at expected tx_timestamp." + severity failure; + end if; + end loop; + state := WAIT_FOR_HEADER_TIMESTAMP; + end case; + end process tx_sample_start_check; + + look_for_dropped_tx_samples : process(tx_clock) is + constant MESSAGES_PER_ITERATION : natural := 3; --Provided in fx3_model + variable current_message_count : natural := 1; + variable iq_value : signed (15 downto 0) := x"0000"; + variable expected_sample_q : signed (15 downto 0); + variable expected_sample_i : signed (15 downto 0); + begin + for i in dac_controls'range loop + if( rising_edge(tx_clock) + and dac_controls(i).enable = '1' + and dac_streams(i).data_v = '1' + and fx3_control.tx_enable = '1' ) + then + expected_sample_i := iq_value; + expected_sample_q := to_signed(current_message_count, 8) & (iq_value(7 downto 0) + 1); + + assert(dac_streams(i).data_i = expected_sample_i) + report "dac_streams("&to_string(i)&").data_i: " & to_hstring(dac_streams(i).data_i) & " | " & + "expected_sample_i: " & to_hstring(expected_sample_i) + severity failure; + assert(dac_streams(i).data_q = expected_sample_q) + report "dac_streams("&to_string(i)&").data_q: " & to_hstring(dac_streams(i).data_q) & " | " & + "expected_sample_q: " & to_hstring(expected_sample_q) + severity failure; + + -- Set iq values based on blocks received + -- See tx_sample_stream's encoding scheme in fx3_model.vhd + if( iq_value = x"03F6" ) then + iq_value := x"0000"; + if( current_message_count < MESSAGES_PER_ITERATION ) then + current_message_count := current_message_count + 1; + else + current_message_count := 1; + end if; + else + iq_value := (iq_value + 2) mod 2048; + end if; + end if; + end loop; + end process look_for_dropped_tx_samples; + + -- + -- Rx Sample Check + -- + first_rx_val_at_mux: process + -- Catches and saves the first sample of + -- each rx enabled burst seen by the mux + begin + for i in adc_controls'range loop + if( adc_controls(i).enable = '1') then + if( ENABLE_CHANNEL_0 = '1' and ENABLE_CHANNEL_1 = '1' ) then + adc_stream_val_at_rx_enable <= adc_streams(i).data_i - 1; + else + adc_stream_val_at_rx_enable <= adc_streams(i).data_i; + end if; + end if; + end loop; + wait until rising_edge(trigger_signal_sync_tb); + end process first_rx_val_at_mux; + + look_for_dropped_rx_samples: process(fx3_pclk_pll) + constant HEADER_LEN : integer := 4; -- In clk cycles + variable header_downcount : integer := HEADER_LEN; + variable rx_val : integer := 0; + variable q_expected : std_logic_vector (15 downto 0); + variable i_expected : std_logic_vector (15 downto 0); + variable q_out : std_logic_vector (15 downto 0); + variable i_out : std_logic_vector (15 downto 0); + variable prev_adc_stream_val_at_rx_enable : signed (15 downto 0) := ( others => '0'); + begin + if( prev_adc_stream_val_at_rx_enable /= adc_stream_val_at_rx_enable ) then + rx_val := to_integer(adc_stream_val_at_rx_enable + 2); + prev_adc_stream_val_at_rx_enable := adc_stream_val_at_rx_enable; + end if; + + if( rising_edge(fx3_pclk_pll) + and fx3_gpif.gpif_oe = '1' + and fx3_control.rx_enable = '1' ) then + + q_expected := std_logic_vector(to_signed(-rx_val, 16)); + i_expected := std_logic_vector(to_signed(rx_val, 16)); + q_out := fx3_gpif.gpif_out(31 downto 16); + i_out := fx3_gpif.gpif_out(15 downto 0); + + if( fx3_control.meta_enable = '1' and header_downcount /= 0 ) then + header_downcount := header_downcount - 1; + else + assert(q_out = q_expected) + report "data_q: " & to_hstring(q_out) & " | " & + "expected: " & to_hstring(q_expected) + severity failure; + assert(i_out = i_expected) + report "data_i: " & to_hstring(i_out) & " | " & + "expected: " & to_hstring(i_expected) + severity failure; + + -- 2047 limit set by gen_adc_controls above + if( rx_val < 2047 ) then + rx_val := rx_val + 1; + else + rx_val := 0; + end if; + end if; + + header_downcount := HEADER_LEN; + end if; + end process look_for_dropped_rx_samples; + +end architecture;