libbladeRF: Added additional information about XB filter & path options

This commit is contained in:
Jon Szymaniak 2014-08-22 23:20:50 -04:00
commit 4a60e10903

View file

@ -499,23 +499,60 @@ typedef enum {
} bladerf_xb;
/**
* XB 200 filterbanks
* XB-200 filter selection options
*/
typedef enum {
BLADERF_XB200_50M = 0, /**< 50MHz filterbank */
BLADERF_XB200_144M, /**< 144MHz filterbank */
BLADERF_XB200_222M, /**< 222MHz filterbank */
BLADERF_XB200_CUSTOM, /**< Custom filterbank */
BLADERF_XB200_AUTO_1DB, /**< Selection based on filters' 1dB points */
BLADERF_XB200_AUTO_3DB /**< Selection based on filters' 3dB points */
/** 50-54 MHz (6 meter band) filterbank */
BLADERF_XB200_50M = 0,
/** 144-148 MHz (2 meter band) filterbank */
BLADERF_XB200_144M,
/**
* 222-225 MHz (1.25 meter band) filterbank.
*
* Note that this filter option is technically wider, covering 206-235 MHz.
*/
BLADERF_XB200_222M,
/**
* This option enables the RX/TX module's custom filter bank path across the
* associated FILT and FILT-ANT SMA connectors on the XB-200 board.
*
* For reception, it is often possible to simply connect the RXFILT and
* RXFILT-ANT connectors with an SMA cable (effectively, "no filter"). This
* allows for reception of signals outside of the frequency range of the
* on-board filters, with some potential trade-off in signal quality.
*
* For transmission, <b>always</b> use an appropriate filter on the custom
* filter path to avoid spurious emissions.
*
*/
BLADERF_XB200_CUSTOM,
/**
* When this option is selected, the other filter options are automatically
* selected depending on the RX or TX module's current frequency, based upon
* the 1dB points of the on-board filters. For frequencies outside the
* range of the on-board filters, the custom path is selected.
*/
BLADERF_XB200_AUTO_1DB,
/**
* When this option is selected, the other filter options are automatically
* selected depending on the RX or TX module's current frequency, based upon
* the 3dB points of the on-board filters. For frequencies outside the
* range of the on-board filters, the custom path is selected.
*/
BLADERF_XB200_AUTO_3DB
} bladerf_xb200_filter;
/**
* XB 200 signal paths
* XB-200 signal paths
*/
typedef enum {
BLADERF_XB200_BYPASS = 0,
BLADERF_XB200_MIX
BLADERF_XB200_BYPASS = 0, /**< Bypass the XB-200 mixer */
BLADERF_XB200_MIX /**< Pass signals through the XB-200 mixer */
} bladerf_xb200_path;
/**