bladerf-micro: build: Delete obsolete build scripts

This commit is contained in:
Brian Glod 2017-03-08 00:03:40 -05:00 • committed by Robert Ghilduta
commit 6bc6c23eef
4 changed files with 0 additions and 562 deletions

View file

@ -1,95 +0,0 @@
load_package flow
# Make a revision of the bladeRF FPGA based on a qip file in the platforms directory
proc make_revision { rev } {
if [revision_exists $rev] {
project_open -force -revision $rev bladerf
} else {
create_revision -based_on base -set_current $rev
}
set_global_assignment -name QIP_FILE [file normalize ../../fpga/platforms/bladerf-micro/bladerf-$rev.qip]
export_assignments
}
# Create the base project
if [project_exists bladerf] {
project_open -force -revision base bladerf
} else {
project_new -family "Cyclone V" -revision base bladerf
}
set_global_assignment -name DEVICE 5CEBA2F23C8
set_global_assignment -name VHDL_INPUT_VERSION VHDL_2008
set_global_assignment -name TOP_LEVEL_ENTITY bladerf
set_global_assignment -name PROJECT_OUTPUT_DIRECTORY output_files
set_global_assignment -name DEVICE_MIGRATION_LIST "5CEBA2F23C8,5CEBA4F23C8,5CEBA9F23C8"
# Configuration settings
set_global_assignment -name STRATIXV_CONFIGURATION_SCHEME "PASSIVE PARALLEL X8"
set_global_assignment -name USE_CONFIGURATION_DEVICE OFF
set_global_assignment -name GENERATE_TTF_FILE ON
set_global_assignment -name GENERATE_RBF_FILE ON
set_global_assignment -name CRC_ERROR_OPEN_DRAIN OFF
set_global_assignment -name FORCE_CONFIGURATION_VCCIO ON
set_global_assignment -name CONFIGURATION_VCCIO_LEVEL 1.8V
set_global_assignment -name ON_CHIP_BITSTREAM_DECOMPRESSION OFF
set_global_assignment -name RESERVE_DATA7_THROUGH_DATA5_AFTER_CONFIGURATION "USE AS REGULAR IO"
set_global_assignment -name CVP_CONFDONE_OPEN_DRAIN OFF
set_global_assignment -name RESERVE_FLASH_NCE_AFTER_CONFIGURATION "USE AS REGULAR IO"
set_global_assignment -name RESERVE_OTHER_AP_PINS_AFTER_CONFIGURATION "USE AS REGULAR IO"
set_global_assignment -name CYCLONEII_RESERVE_NCEO_AFTER_CONFIGURATION "USE AS REGULAR IO"
set_global_assignment -name RESERVE_DCLK_AFTER_CONFIGURATION "USE AS REGULAR IO"
set_global_assignment -name OUTPUT_IO_TIMING_NEAR_END_VMEAS "HALF VCCIO" -rise
set_global_assignment -name OUTPUT_IO_TIMING_NEAR_END_VMEAS "HALF VCCIO" -fall
set_global_assignment -name OUTPUT_IO_TIMING_FAR_END_VMEAS "HALF SIGNAL SWING" -rise
set_global_assignment -name OUTPUT_IO_TIMING_FAR_END_VMEAS "HALF SIGNAL SWING" -fall
set_global_assignment -name CYCLONEII_OPTIMIZATION_TECHNIQUE SPEED
set_global_assignment -name PHYSICAL_SYNTHESIS_COMBO_LOGIC ON
set_global_assignment -name PHYSICAL_SYNTHESIS_REGISTER_DUPLICATION ON
set_global_assignment -name PHYSICAL_SYNTHESIS_REGISTER_RETIMING ON
set_global_assignment -name ROUTER_LCELL_INSERTION_AND_LOGIC_DUPLICATION ON
set_global_assignment -name ROUTER_TIMING_OPTIMIZATION_LEVEL MAXIMUM
set_global_assignment -name AUTO_PACKED_REGISTERS_STRATIXII NORMAL
set_global_assignment -name FITTER_EFFORT "STANDARD FIT"
set_global_assignment -name ADV_NETLIST_OPT_SYNTH_WYSIWYG_REMAP ON
set_global_assignment -name ROUTER_CLOCKING_TOPOLOGY_ANALYSIS ON
set_global_assignment -name ENABLE_DRC_SETTINGS ON
#set_instance_assignment -name FAST_INPUT_REGISTER ON -to lms_rx_data[*]
#set_instance_assignment -name FAST_OUTPUT_REGISTER ON -to fx3_gpif[*]
#set_instance_assignment -name FAST_OUTPUT_REGISTER ON -to lms_tx_data[*]
#set_instance_assignment -name FAST_OUTPUT_REGISTER ON -to fx3_ctl[*]
#set_instance_assignment -name FAST_OUTPUT_ENABLE_REGISTER ON -to fx3_gpif[*]
set_global_assignment -name OPTIMIZE_POWER_DURING_FITTING "EXTRA EFFORT"
set_global_assignment -name FITTER_AUTO_EFFORT_DESIRED_SLACK_MARGIN "1 ns"
#set_global_assignment -name RESERVE_ALL_UNUSED_PINS_WEAK_PULLUP "AS OUTPUT DRIVING GROUND"
# Create an base revision
set_global_assignment -name QIP_FILE [file normalize ../../fpga/platforms/bladerf-micro/bladerf.qip]
source [file normalize ../../fpga/platforms/bladerf-micro/constraints/pins.tcl]
file copy -force ../ip.ipx ./ip.ipx
export_assignments
# Create the hosted
make_revision hosted
# Create headless
#make_revision headless
# Create fsk_bridge
#make_revision fsk_bridge
# Create QPSK transmitter
#make_revision qpsk_tx
# Create ATSC transmitter
#make_revision atsc_tx
# Projects created!
puts "bladeRF projects created. Please use the build.tcl script to build images.\n"
puts "Revisions:"
foreach rev [get_project_revisions] {
puts " $rev"
}
project_close

View file

@ -1,306 +0,0 @@
#!/usr/bin/env bash
#
# Build a bladeRF ADI FPGA image
################################################################################
function usage()
{
echo ""
echo "bladeRF-ADI FPGA build script"
echo ""
echo "Usage: `basename $0` -r <rev> -s <size>"
echo ""
echo "Options:"
echo " -r <rev> FPGA revision"
echo " -s <size> FPGA size"
echo " -a <stp> SignalTap STP file"
echo " -f Force STP insertion"
echo " -n <Tiny|Small|Fast> Select NIOS II revision. Tiny is the"
echo " default and can be built with"
echo " Quartus Web Edition."
echo " -h Show this text"
echo ""
echo "Supported revisions:"
echo " hosted"
# These revisions were for used for early prototyping and testing. They
# require some work to get building with the current design. As such,
# they have been removed for this list for the time being to avoid
# confusion. These can be re-added once they are updated and working.
#echo " headless"
#echo " fsk_bridge"
#echo " qpsk_tx"
echo ""
echo "Supported sizes (kLE)"
echo " 25"
echo " 49"
echo " 301"
echo ""
}
# Returns:
# 0 on compatible version
# 1 on incompatible version or unable to detemine version
check_quartus_version()
{
local readonly VERSION_FILE="$QUARTUS_ROOTDIR/version.txt"
if [ ! -f "$VERSION_FILE" ]; then
echo "Could not find Quartus version file." >&2
return 1
fi
local readonly VERSION=$( \
grep -m 1 Version $QUARTUS_ROOTDIR/version.txt | \
sed -e 's/Version=//' \
)
echo "Detected Quartus II $VERSION"
local readonly VERSION_MAJOR=$( \
echo "$VERSION" | \
sed -e 's/\([[:digit:]]\+\).*/\1/g' \
)
if [ -z "$VERSION_MAJOR" ]; then
echo "Failed to retrieve Quartus version number." >&2
return 1
fi
if [ "$VERSION_MAJOR" -lt "15" ]; then
echo "The bladeRF FPGA design requires Quartus II version 15" >&2
echo "The installed version is: $VERSION" >&2
return 1
fi
return 0
}
if [ $# -eq 0 ]; then
usage
exit 0
fi
# Default to NIOS II E (Tiny)
nios_rev="Tiny"
while getopts ":fa:s:r:n:h" opt; do
case $opt in
h)
usage
exit 0
;;
r)
rev=$OPTARG
;;
s)
size=$OPTARG
;;
a)
echo "STP: $OPTARG"
stp=$(readlink -f $OPTARG)
;;
f)
echo "Forcing STP insertion"
force="-force"
;;
n) nios_rev=$OPTARG
;;
\?)
echo "Unrecognized option: -$OPTARG" >&2
usage
exit 1
;;
esac
done
if [ "$size" == "" ]; then
echo -e "\nError: size (-s) is required\n" >&2
usage
exit 1
fi
if [ "$size" -ne 25 ] && [ "$size" -ne 49 ] && [ "$size" -ne 301 ]; then
echo -e "\nError: Invalid size (\"$size\")" >&2
usage
exit 1
fi
if [ "$rev" == "" ]; then
echo -e "\nError: revision (-r) is required\n" >&2
usage
exit 1
fi
if [ "$rev" != "hosted" ] && [ "$rev" != "atsc_tx" ]; then
echo -e "\nError: Invalid revision (\"$rev\")\n" >&2
usage
exit 1
fi
if [ "$stp" != "" ] && [ ! -f "$stp" ]; then
echo -e "\nCould not find STP file: $stp\n" >&2
exit 1
fi
if [ "$nios_rev" != "Tiny" ] && [ "$nios_rev" != "Small" ] && [ "$nios_rev" != "Fast" ]; then
echo -e "\nInvalid NIOS II revision: $nios_rev\n" >&2
exit 1
fi
# quartus_sh script gives a reference point to the quartus bin dir
quartus_sh="`which quartus_sh`"
if [ $? -ne 0 ] || [ ! -f "$quartus_sh" ]; then
echo -e "\nError: quartus_sh (Quartus 'bin' directory) does not appear to be in your PATH\n" >&2
exit 1
fi
# Complain early about an unsupported version. Otherwise, the user
# may get some unintuitive error messages.
check_quartus_version
if [ $? -ne 0 ]; then
exit 1
fi
nios_system=../fpga/ip/altera/nios_system_micro
device="5CEB"
if [ "$size" -eq 25 ]; then
device="${device}A2"
elif [ "$size" -eq 49 ]; then
device="${device}A4"
elif [ "$size" -eq 301 ]; then
device="${device}A9"
fi
device="${device}F23C8"
# 9a484b436: Windows-specific workaround for Quartus bug
if [ "x$(uname)" != "xLinux" ]; then
QUARTUS_BINDIR=$QUARTUS_ROOTDIR/bin
export QUARTUS_BINDIR
echo "## Non-Linux OS Detected (Windows?)"
echo "## Forcing QUARTUS_BINDIR to ${QUARTUS_BINDIR}"
fi
# Error out at the first sign of trouble
set -e
echo ""
echo "##########################################################################"
echo " Generating NIOS II Qsys for bladeRF ..."
echo "##########################################################################"
echo ""
# Switch out the NIOS II implementation in nios_system.qsys
echo "Selecting NIOS II implementation: $nios_rev"
sed -ri "s/name=\"impl\" value=\"(Tiny|Small|Fast)\"/name=\"impl\" value=\"$nios_rev\"/" $nios_system/nios_system.qsys
ip-generate \
--project-directory=$nios_system \
--output-directory=$nios_system \
--report-file=bsf:$nios_system/nios_system.bsf \
--system-info=DEVICE_FAMILY=Cyclone\ V \
--system-info=DEVICE=${device} \
--system-info=DEVICE_SPEEDGRADE=8 \
--component-file=$nios_system/nios_system.qsys
ip-generate \
--project-directory=$nios_system \
--output-directory=$nios_system/synthesis \
--file-set=QUARTUS_SYNTH \
--report-file=sopcinfo:$nios_system/nios_system.sopcinfo \
--report-file=html:$nios_system/nios_system.html \
--report-file=qip:$nios_system/synthesis/nios_system.qip \
--report-file=cmp:$nios_system/nios_system.cmp \
--system-info=DEVICE_FAMILY=Cyclone\ V \
--system-info=DEVICE=${device} \
--system-info=DEVICE_SPEEDGRADE=8 \
--component-file=$nios_system/nios_system.qsys
echo ""
echo "##########################################################################"
echo " Building BSP and sample application..."
echo "##########################################################################"
echo ""
pushd $nios_system/software/bladeRF_nios_bsp
cp ../settings.bsp.in ./settings.bsp
nios2-bsp-generate-files --settings=settings.bsp --bsp-dir=.
make
cd ../bladeRF_nios
make clean all
# Encountered issues on Ubuntu 13.04 with the SDK's scripts not resolving
# paths properly. In the end, some items wind up being defined as .jar's that
# should be in our PATH at this point, so we set these up here...
#ELF2HEX=elf2hex.jar ELF2DAT=.jar make mem_init_generate
make mem_init_clean mem_init_generate
popd
# Fix Quartus outputting '1' or '0' for ARST_LVL when it should be 1'b0 or 1'b1
sed -i s/"'\([01]\)'"/"1'b\1"/ $nios_system/synthesis/nios_system.v
echo ""
echo "##########################################################################"
echo " Building FPGA Image: $rev, $size kLE"
echo "##########################################################################"
echo ""
mkdir -p work
pushd work
$quartus_sh -t ../bladerf_micro.tcl
if [ "$stp" == "" ]; then
$quartus_sh -t ../build_micro.tcl -rev $rev -size $size
else
$quartus_sh -t ../build_micro.tcl -rev $rev -size $size -stp $stp $force
fi
popd
BUILD_TIME_DONE="$(cat work/output_files/$rev.done)"
BUILD_TIME_DONE=$(date -d"$BUILD_TIME_DONE" '+%F_%H.%M.%S')
BUILD_NAME="$rev"x"$size"
BUILD_OUTPUT_DIR="$BUILD_NAME"-"$BUILD_TIME_DONE"
RBF=$BUILD_NAME.rbf
mkdir -p "$BUILD_OUTPUT_DIR"
cp "work/output_files/$rev.rbf" "$BUILD_OUTPUT_DIR/$RBF"
for file in work/output_files/*rpt work/output_files/*summary; do
new_file=$(basename $file | sed -e s/$rev/"$BUILD_NAME"/)
cp $file "$BUILD_OUTPUT_DIR/$new_file"
done
pushd $BUILD_OUTPUT_DIR
md5sum $RBF > $RBF.md5sum
sha256sum $RBF > $RBF.sha256sum
MD5SUM=$(cat $RBF.md5sum | awk '{ print $1 }')
SHA256SUM=$(cat $RBF.sha256sum | awk '{ print $1 }')
popd
# Restore NIOS II implementation to Tiny to avoid accidentally committing this change
echo "Restoring NIOS II implementation to Tiny..."
sed -ri "s/name=\"impl\" value=\"(Tiny|Small|Fast)\"/name=\"impl\" value=\"Tiny\"/" $nios_system/nios_system.qsys
echo ""
echo "##########################################################################"
echo " Done! Image, reports, and checksums copied to:"
echo " $BUILD_OUTPUT_DIR"
echo ""
echo " $RBF checksums:"
echo " MD5: $MD5SUM"
echo " SHA256: $SHA256SUM"
echo ""
cat "$BUILD_OUTPUT_DIR/$BUILD_NAME.fit.summary" | sed -e 's/^\(.\)/ \1/g'
echo "##########################################################################"
echo ""

View file

@ -1,158 +0,0 @@
load_package flow
package require cmdline
set options {\
{ "size.arg" "25" "FPGA Size - 25, 49, or 301" } \
{ "rev.arg" "" "Revision name" } \
{ "stp.arg" "" "SignalTap II File to use" } \
{ "force" "" "Force using SignalTap II" }
}
# Read the revision from the commandline
array set opts [::cmdline::getoptions quartus(args) $options]
proc print_revisions { } {
project_open -force bladerf -revision base
puts stderr "Revisions"
puts stderr "---------"
foreach $rev [get_project_revisions] {
if { $rev == "base" } {
continue
}
puts stderr " $rev"
}
project_close
}
# Check to make sure the project exists
if { ![project_exists bladerf] } {
puts stderr "ERROR: bladeRF project does not exist. Please run:"
puts stderr " $ quartus_sh -t ../bladerf_micro.tcl"
exit 1
}
# Check to make sure the revison was used on the commandline.
# If it wasn't, print out the revisions available.
if { $opts(rev) == "" } {
puts stderr "ERROR: Revision required to build\n"
print_revisions
exit 1
}
# Check to make sure the revision exists
if { ![revision_exists -project bladerf $opts(rev)] } {
puts stderr "ERROR: No revision named $opts(rev) in bladeRF project\n"
print_revisions
exit 1
}
# Open the project with the specific revision
project_open -revision $opts(rev) bladerf
# Check the size of the FPGA
if { $opts(size) != 301 && $opts(size) != 49 && $opts(size) != 25 } {
puts stderr "ERROR: Size must be 25, 49, or 301. Size $opts(size) is invalid."
exit 1
}
# Add signaltap file
set forced_talkback 0
set enable_stp 0
if { $opts(stp) != "" } {
if { ([get_user_option -name TALKBACK_ENABLED] == off || [get_user_option -name TALKBACK_ENABLED] == "") && $opts(force) } {
puts "Enabling TalkBack to include SignalTap file"
set_user_option -name TALKBACK_ENABLED on
set forced_talkback 1
}
# SignalTap requires either TalkBack to be enabled or a non-Web Edition of Quartus (e.g. Standard, Pro)
if { ([get_user_option -name TALKBACK_ENABLED] == on) || (![string match "*Web Edition*" $quartus(version)]) } {
puts "Adding SignalTap file: [file normalize $opts(stp)]"
set_global_assignment -name ENABLE_SIGNALTAP on
set_global_assignment -name USE_SIGNALTAP_FILE [file normalize $opts(stp)]
set_global_assignment -name SIGNALTAP_FILE [file normalize $opts(stp)]
set enable_stp 1
} else {
puts stderr "\nERROR: Cannot add $opts(stp) to project without enabling TalkBack."
puts stderr " Use -force to enable and add SignalTap to project."
exit 1
}
} else {
set_global_assignment -name ENABLE_SIGNALTAP off
}
set device "5CEB"
if { $opts(size) == 25 } {
set device "${device}A2"
} elseif { $opts(size) == 49 } {
set device "${device}A4"
} elseif { $opts(size) == 301 } {
set device "${device}A9"
}
set device "${device}F23C8"
set_global_assignment -name DEVICE ${device}
set failed 0
# Save all the options
export_assignments
project_close
# The quartus_stp executable creates/edits a Quartus Setting File (.qsf)
# based on the SignalTap II File specified if enabled. It must be run
# successfully before running Analysis & Synthesis.
if { $enable_stp == 1 } {
if { $failed == 0 && [catch {qexec "quartus_stp --stp_file [file normalize $opts(stp)] --enable bladerf --rev $opts(rev)"} result] } {
puts "Result: $result"
puts stderr "ERROR: Adding SignalTap settings to QSF failed."
set failed 1
}
}
# Open the project with the specific revision
project_open -revision $opts(rev) bladerf
# Run Analysis and Synthesis
if { $failed == 0 && [catch {execute_module -tool map} result] } {
puts "Result: $result"
puts stderr "ERROR: Analysis & Synthesis Failed"
set failed 1
}
# Run Fitter
if { $failed == 0 && [catch {execute_module -tool fit} result ] } {
puts "Result: $result"
puts stderr "ERROR: Fitter failed"
set failed 1
}
# Run Static Timing Analysis
if { $failed == 0 && [catch {execute_module -tool sta} result] } {
puts "Result: $result"
puts stderr "ERROR: Timing Analysis Failed!"
set failed 1
}
# Run Assembler
if { $failed == 0 && [catch {execute_module -tool asm} result] } {
puts "Result: $result"
puts stderr "ERROR: Assembler Failed!"
set failed 1
}
# Run EDA Output
#if { $failed == 0 && [catch {execute_module -tool eda} result] } {
# puts "Result: $result"
# puts stderr "ERROR: EDA failed!"
# set failed 1
#} elseif { $failed == 0 } {
# puts "INFO: EDA OK!"
#}
# If we were forced to turn on TALKBACK .. turn it back off
if { $forced_talkback == 1 } {
puts "Disabling TalkBack back to original state"
set_user_option -name TALKBACK_ENABLED off
}
project_close

View file

@ -1,3 +0,0 @@
<library>
<path path="../../fpga/ip/**/*"/>
</library>