hdl: Adding pulse_gen.vhd

Takes a signal that may be static for many clock cycles and turns
it into a single-cycle pulse.
This commit is contained in:
Brian Glod 2015-11-22 17:14:03 -05:00 • committed by Jon Szymaniak
commit 8b6a3e3d9d

View file

@ -0,0 +1,123 @@
-- From Altera Solution ID rd05312011_49, need the following for Qsys to use VHDL 2008:
-- altera vhdl_input_version vhdl_2008
-- Copyright (c) 2015 Nuand LLC
--
-- Permission is hereby granted, free of charge, to any person obtaining a copy
-- of this software and associated documentation files (the "Software"), to deal
-- in the Software without restriction, including without limitation the rights
-- to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
-- copies of the Software, and to permit persons to whom the Software is
-- furnished to do so, subject to the following conditions:
--
-- The above copyright notice and this permission notice shall be included in
-- all copies or substantial portions of the Software.
--
-- THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-- IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-- FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
-- AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
-- LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
-- OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
-- THE SOFTWARE.
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
-- -----------------------------------------------------------------------------
-- Entity: pulse_gen
-- Description: Takes an incoming (previously synchronized) signal that lasts
-- for one or more clock cycles, and outputs a single-cycle pulse.
--
-- Parameters:
-- EDGE_RISE : '1' = generates a pulse when input transitions low-to-high
-- EDGE_FALL : '1' = generates a pulse when input transitions high-to-low
--
-- It is possible to have both a rising and falling edge pulse, meaning
-- the output pulse will occur for one clock period on the rising edge
-- of the input, and once more for the falling edge of the input.
--
-- -----------------------------------------------------------------------------
entity pulse_gen is
generic(
EDGE_RISE : std_logic := '1';
EDGE_FALL : std_logic := '0'
);
port(
clock : in std_logic;
reset : in std_logic;
sync_in : in std_logic := '0';
pulse_out : out std_logic
);
end entity;
architecture arch of pulse_gen is
type fsm_t is (
IDLE,
RUNNING
);
type state_t is record
state : fsm_t;
history : std_logic_vector(1 downto 0);
end record;
constant RESET_VALUES : state_t := (
state => IDLE,
history => (others => '-')
);
signal current : state_t;
signal future : state_t;
begin
sync_proc : process( clock, reset )
begin
if( reset = '1' ) then
current <= RESET_VALUES;
elsif( rising_edge(clock) ) then
current <= future;
end if;
end process;
comb_proc : process( all )
begin
-- Defaults
future <= current;
pulse_out <= '0';
case( current.state ) is
when IDLE =>
-- Read current value of sync_in and use it to populate
-- input history to prevent initial false pulses.
future.history <= (others => sync_in);
future.state <= RUNNING;
when RUNNING =>
future.history <= current.history(0) & sync_in;
-- Output a pulse when input signal transitions from low to high
if( EDGE_RISE = '1' ) then
if( current.history = "01" ) then
pulse_out <= '1';
end if;
end if;
-- Output a pulse when input signal transitions from high to low
if( EDGE_FALL = '1' ) then
if( current.history = "10" ) then
pulse_out <= '1';
end if;
end if;
end case;
end process;
end architecture;