Robert Ghilduta
|
b9c41b87e4
|
bladeRF-cli: clear up nomeclature in set samplerate
|
2023-02-28 04:42:00 -08:00 |
|
Robert Ghilduta
|
12f67cb852
|
hdl: update change log
|
2023-02-13 03:45:21 -08:00 |
|
Robert Ghilduta
|
6ff8fd5a0d
|
hdl: add eight_bit_mode_en signal to bladerf platform
|
2023-02-13 03:28:19 -08:00 |
|
Ryan Thompson
|
c8e3ff3c3a
|
Revert "DEBUG: sys, c5, and tx clks tied to LEDs"
This reverts commit a3bce1308eceba4e02d5a9274cda7ec1a9606136.
|
2023-02-13 03:28:19 -08:00 |
|
Ryan Thompson
|
f29b315e8b
|
DEBUG: sys, c5, and tx clks tied to LEDs
|
2023-02-13 03:28:19 -08:00 |
|
Ryan Thompson
|
5c8621c0b9
|
hdl: 8bit loopback mode support added
|
2023-02-13 03:28:19 -08:00 |
|
Robert Ghilduta
|
4edbdcf92b
|
hdl: wire up eight_bit_mode_en -> eightbit_en_tx
|
2023-02-13 03:28:19 -08:00 |
|
Robert Ghilduta
|
1e5c81bb7b
|
hdl: fix shifting
|
2023-02-13 03:28:19 -08:00 |
|
Ryan Thompson
|
aa3717a2af
|
hdl: FPGA version update v0.15.0
FPGA version updated to v0.15.0 to represent the addition of 8bit mode.
|
2023-02-13 03:28:19 -08:00 |
|
Robert Ghilduta
|
a11cfa01a3
|
hdl: add 8bit sample mode to bladerf-hosted
|
2023-02-13 03:28:19 -08:00 |
|
Ryan Thompson
|
a9eea133a0
|
hdl: 8bit meta tb added
|
2023-02-13 03:28:19 -08:00 |
|
Ryan Thompson
|
85c917ddc4
|
hdl: 8bit mode IQ tb added
|
2023-02-13 03:28:19 -08:00 |
|
Ryan Thompson
|
39b13c8464
|
hdl: 8bit mode added
|
2023-02-13 03:28:19 -08:00 |
|
Ryan Thompson
|
afe549827a
|
hdl: packet tb added
|
2023-02-13 03:28:19 -08:00 |
|
Ryan Thompson
|
40ea2617c5
|
hdl: meta tb added
|
2023-02-13 03:28:19 -08:00 |
|
Ryan Thompson
|
63194f2b80
|
hdl: IQ tb added
|
2023-02-13 03:28:19 -08:00 |
|
Ryan Thompson
|
d88e30fbe1
|
hdl: FX3 model TX iteration time gaps adjusted
|
2023-02-13 03:28:19 -08:00 |
|
Ryan Thompson
|
15b7d9c3b6
|
host: squashed cmake warnings
updated cmake requirement from 2.8 to 2.8.12
|
2023-02-13 03:28:19 -08:00 |
|
Robert Ghilduta
|
21804743c2
|
hdl: change FIFO arithmetic so it handles 64bit wide buses correctly
|
2022-04-03 19:48:34 -07:00 |
|
Robert Ghilduta
|
70d9bc52dd
|
hdl: rx-adsb: update rx-adsb and bladerf-adsb to handle packet_mode
|
2022-04-03 19:48:29 -07:00 |
|
Robert Ghilduta
|
d16046acf3
|
hdl: bump version to 0.14.0
|
2022-04-03 19:39:10 -07:00 |
|
Robert Ghilduta
|
06ded6ce02
|
hdl: add wishbone master NiOS peripheral core
|
2022-04-03 19:39:10 -07:00 |
|
Robert Ghilduta
|
cf50527525
|
hdl: add Wishbone master to bladeRF 2.0 micro's bladeRF-hosted revision
|
2022-04-03 19:39:10 -07:00 |
|
Robert Ghilduta
|
27709317fc
|
hdl: add Wishbone master IP NiOS peripheral
|
2022-04-03 19:39:10 -07:00 |
|
Robert Ghilduta
|
963d409980
|
hdl: fix RX halting issue in packet mode
RX buffering can something be delayed if only a single PDU is available when the
RX chain is activated.
|
2022-04-03 19:39:10 -07:00 |
|
Robert Ghilduta
|
2a8774d6e6
|
hdl: ensure meta_fifos never overflow
|
2022-04-03 19:39:10 -07:00 |
|
Robert Ghilduta
|
9e3fa980c2
|
hdl: disconnect nios_ss_n bus from GPIO(20 downto 19)
|
2022-04-03 19:39:10 -07:00 |
|
Robert Ghilduta
|
7740242c7b
|
add bladeRF 2.0 micro xA5 support to libbladeRF and FPGA
|
2022-04-03 19:39:10 -07:00 |
|
Robert Ghilduta
|
29455d29d8
|
Revert "hdl: bladerf-wlan: disable RX switch when tx_ota_req is asserted"
This reverts commit ded573bc9a.
|
2021-06-02 18:16:31 -07:00 |
|
Robert Ghilduta
|
ded573bc9a
|
hdl: bladerf-wlan: disable RX switch when tx_ota_req is asserted
The RX RF switch can provide an additional 30dB of isolation if no input is
selected, this can be helpful when transmitting.
|
2021-05-05 18:04:50 -07:00 |
|
Robert Ghilduta
|
8f8f8650cb
|
hdl: add core present bit to config gpio
|
2020-11-23 19:27:49 -08:00 |
|
Robert Ghilduta
|
44526c0772
|
hdl: bump version to 0.12.0
|
2020-11-23 19:27:49 -08:00 |
|
Robert Ghilduta
|
6282e57d61
|
bladeRF-micro: keep TX going long enough to flush TX pipeline
|
2020-11-23 00:59:27 -08:00 |
|
Robert Ghilduta
|
b4aed7ed84
|
bladeRF-micro: add arbiter commands to micro SPI access
|
2020-11-23 00:59:27 -08:00 |
|
Robert Ghilduta
|
bac5f9bcff
|
bladeRF-micro: add bladerf_rfic_spi_ctrl
|
2020-11-23 00:59:27 -08:00 |
|
Robert Ghilduta
|
73aeb8b5e6
|
bladeRF-micro: add SPI controller and SPI arbiter
This allows SPI bus to be shared with the HDL application.
|
2020-11-23 00:59:27 -08:00 |
|
Robert Ghilduta
|
04c2c724d4
|
bladeRF-micro: add arbiter and rfic_spi_controller paths
|
2020-11-23 00:59:27 -08:00 |
|
Robert Ghilduta
|
e25057d16e
|
bladeRF-micro: add testbench for rfic_spi_controller
|
2020-11-23 00:59:27 -08:00 |
|
Robert Ghilduta
|
dde771c28f
|
bladeRF-micro: add HDL SPI controller for RFIC
|
2020-11-23 00:59:27 -08:00 |
|
Robert Ghilduta
|
319997265f
|
hdl: make wlan have an 80MHz RX clock target
|
2020-11-23 00:59:27 -08:00 |
|
Robert Ghilduta
|
c4a13ce1a1
|
hdl: connect AGC signals in bladerf-wlan
|
2020-11-23 00:59:27 -08:00 |
|
Robert Ghilduta
|
7b879a503d
|
hdl: add bladeRF 2.0 micro AGC driver
This driver does not control the RFIC's AGC, so much as it interprets signals for
the modem.
|
2020-11-23 00:59:27 -08:00 |
|
Robert Ghilduta
|
6f08ebeed8
|
hdl: instantiate wlan modem
|
2020-11-23 00:59:27 -08:00 |
|
Robert Ghilduta
|
d72eade814
|
hdl: add wlan revision
|
2020-11-23 00:59:27 -08:00 |
|
Robert Ghilduta
|
5f5396f296
|
hdl: change when fifo_reader asserts eop and sop
|
2020-11-23 00:59:27 -08:00 |
|
Robert Ghilduta
|
c68998dbe6
|
hdl: add FX3 model and simulation
|
2020-11-23 00:59:27 -08:00 |
|
Robert Ghilduta
|
26b45d6036
|
hdl: add packet mode to sample_stream_tb
|
2020-11-23 00:59:27 -08:00 |
|
Robert Ghilduta
|
f47d664670
|
hdl: add micro specific testbench with integrated packet mode
|
2020-11-23 00:59:27 -08:00 |
|
Robert Ghilduta
|
231b050414
|
hdl: move fx3_gpif_tb to micro specific testbench
|
2020-11-23 00:59:27 -08:00 |
|
Robert Ghilduta
|
c479b54415
|
hdl: make sample_stream_tb use generic and bladerf_p types
|
2020-11-23 00:59:27 -08:00 |
|