* libbladeRF: brf_get_*_range expect bladerf_range**
Previously, the bladerf_get_*_range family of functions expected a
struct bladerf_range *
The gain-related functions turned out to require a double ptr to work
properly. For consistency, this commit changes libbladeRF to use a
double ptr on all the range functions, instead of just the gain ones.
* bladeRF-cli: update get-range function calls
* host: libbladeRF: add bladerf_ad9361_get_ctrl_out
Adds functionality to read the CTRL_OUT pins from the AD9361 RFIC.
* host: bladeRF-cli: add print for AD9361 CTRL_OUT
* host: python: add support for ad9361_ctrl_out
* host: libbladeRF: clang-format fixes
* host: bladeRF-cli: clang-format fixes
* host: libbladeRF: spacing/wording/clang-format
Improve wording of various parts, add missing params, clean up various
wrap anomalies, and make it run clean through clang-format.
* host: libbladeRF: add functions to get/set ADF4002 refclk frequency
* host: bladeRF-cli: add print/set adf_refclk
* host: python: add adf4002_refclk functions
This permits getting and setting the ADF4002 reference clock
frequency.
>>> import bladerf
>>> b = bladerf.BladeRF()
ad9361_init : AD936x Rev 2 successfully initialized
>>> b.adf4002_refclk
10000000
>>> b.adf4002_refclk = 9000000
>>> b.adf4002_refclk
9000000
>>> b.adf4002_refclk = 900000000
[ERROR @
"/home/rtucker/dev/privatebladeRF/host/libraries/libbladeRF/src/board/bladerf2/bladerf2.c":4360]
bladerf_adf4002_set_refclk: bladerf_adf4002_calculate_ratio failed:
Provided parameter was out of the allowable range
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
File
"/home/rtucker/dev/privatebladeRF/host/libraries/libbladeRF_bindings/python/bladerf.py",
line 1581, in set_adf4002_refclk
_check_error(ret)
File
"/home/rtucker/dev/privatebladeRF/host/libraries/libbladeRF_bindings/python/bladerf.py",
line 998, in _check_error
raise globals()[errorval.name](err)
bladerf.RangeError: Provided parameter was out of the allowable range
>>> b.adf4002_refclk
9000000
>>> b.adf4002_refclk = 10000000
>>> b.adf4002_refclk
10000000
* host: libbladeRF: make ADF convenience functions static
bladerf_adf4002_set_refclk is much nicer (and safer) than calculating
the R/N ratio and then doing a bladerf_adf4002_configure.
* host: python: update cffi header block
Intended for use by bladeRF-micro, which has a TPS2115A auto power
mux. The function will read the power status bit from the Nios GPIO and
set the human-readable enum corresponding to the active power source.
Update bladerf_rf_switch_config struct to use "rfic" instead of "ad9361"
for genericness and consistency.
Also clean up missing/incorrect documentation in various places.
Fix bladeRF-cli to use proper struct member names for
bladerf_rf_switch_config.