Interactive console's argc wasn't being checked, resulting in
a bogus "Unexpected command:" and often segfaults.
In other news, I failed to note in the previus changeset that at
least half the cli changes were authored by Brian Padalino...so
doing that here - ec54e4e409
The CLI now supports flashing the FX3 and loading the FPGA from the
command line and through the interactive console.
To flash the firmware from the command line:
./bin/bladerf -b -f ./path/to/img -d /dev/bladerf1
To load the firmware from the command line:
./bin/bladerf -b -l ./path/to/rbf -d /dev/bladerf1
To flash/load interactively either run with -d /dev/bladerf1, or
use the open command to attach to a device:
bladeRF> open /dev/bladerf1
To flash the firmware interactively:
bladeRF> load fx3 ./path/to/img
To load the FPGA interactively:
bladeRF> load fpga ./path/to/rbf
Note that a power-on-reset is currently required in between
flashing firmware and loading the FPGA.
Various commands have been stubbed out for the time being. A TODO
list has been created to keep track of desired functionality.
The simple_load and upgrade_firmware programs have been removed,
as they are no longer needed.
This is the first commit in a set of upcoming changes that will
move functionality from simple_load and upgrade_firmware into the
libbladeRF library and provide access to these routines through a
bladeRF cli.
Don't merge from jon-dev until I get this straightened out, or
you'll be left with something possibly unusable...
This should include everything needed to build the FSK bridge example from scratch.
1) Open existing hdl/quartus/bladerf.qsf project in Quartus
a) Generate the Nios core
i) Tools -> QSys -> File -> Open -> navigate to ./hdl/fpga/ip/altera/nios_system/nios_system.qsys
ii) After opening qsys file, go to Generation tab, click the "Generate" button
b) Compile the embedded Nios image
i) Tools -> Nios II Software Build Tools for Eclipse
I) File -> Import -> General -> Existing Projects into Workspace -> Next
-> Browse to checkout root directory -> check both lms_spi_controller and lms_spi_controller_bsp
-> Finish
II) right click lms_spi_controller_bsp -> NIOS II -> Generate BSP
III) right click lms_spi_controller -> Build
IV) right click lms_spi_controller -> Make Targets -> Build... -> select mem_init_generate -> Build
c) Synthesize FPGA image
i) Processing -> Start Compilation
2) Compile driver and user mode applications
a) cd linux/kernel ; make ; inmod bladeRF.ko
b) cd ../apps; make
c) To program the fpga execute ./simple_load c4images/blink.rbf
i) Load bladerf.rbf from the quartus output_files directory
3) Use bladeRF's UART as an FSK bridge!
NB. The firmware upgrade utility does work, only use it on valid .img files.