Robert Ghilduta
df369b01f4
libbladeRF: bump API version and add changelog for v1.9.0
2017-12-07 21:26:28 -08:00
Robert Ghilduta
1434ae89b8
libbladeRF: Updated to v1.8.0
...
libbladeRF v1.8.0 introduces support for the Automatic Gain Control.
2017-07-06 08:27:47 -07:00
Robert Ghilduta
f1ef088f2b
libbladeRF: add gain_mode settings to control AGC
...
bladerf_set_gain_mode() and bladerf_get_gain_mode() were added to allow for
control of the bladeRF's AGC.
2017-07-05 08:59:09 -07:00
Robert Ghilduta
905c65c2a5
libbladeRF: add AGC GPIO bit
...
Bit 12 controls the AGC
2017-07-05 08:59:08 -07:00
Jon Szymaniak
587e4ac5c2
libbladeRF: Updated to v1.7.2
2016-06-29 11:55:21 -04:00
Jon Szymaniak
0bed16aa6b
libbladeRF: doc: Be consistent with section name capitalization
2016-05-28 18:06:38 -04:00
Jon Szymaniak
9a72fc4211
libbladeRF: doc: Typo fix - removed trailing ] characters
2016-05-28 18:04:45 -04:00
Jon Szymaniak
03aabe30a1
libbladeRF: Updated to v1.7.1
...
Documentation-only changes since v1.7.0.
2016-05-28 17:47:03 -04:00
Jon Szymaniak
2a01f9d8fd
libbladeRF: doc: Typo fix
2016-05-28 17:41:12 -04:00
Jon Szymaniak
a83c62d92d
libbladeRF: doc: Corrected & clarified metadata format description
...
- Removed incorrect block size, and noted this for both Hi-Speed
and SuperSpeed configurations.
- Attempted to make this description clearer by keeping things
in units of samples, where possible.
- Explicitly noted that callers of the sync interface do not need
to be concerned with underlying metadata position and layout --
only async interface users do.
- Added link to libbladeRF's `metadata.h` for reference.
2016-05-28 17:39:07 -04:00
Jon Szymaniak
7a82ed7e3a
libbladeRF: doc: Moved and clarified bladerf_get_timestamp() usage
...
This function was incorrectly located in the "Low-Level" group.
There has been some confusion reported about how to properly use this
function. As such, the description has been updated to better describe
when to use this function versus the timestamp metadata mechanisms.
2016-05-28 17:02:54 -04:00
Jon Szymaniak
1a35d78a4e
libbladeRF: doc: Explicitly note trigger example's clock config assumptions
2016-05-28 16:20:37 -04:00
Jon Szymaniak
579f8f7118
libbladeRF: doc: Describe bladerf_set_smb_mode() usage for MIMO config
2016-05-28 16:19:47 -04:00
Jon Szymaniak
2d3f16b47c
libbladeRF: Updated to v1.7.0
2016-05-22 19:39:55 -04:00
Jon Szymaniak
085239c834
libbladeRF: doc: Corrected typo and added clarification
2016-05-22 19:20:28 -04:00
Jon Szymaniak
ca40176be6
libbladeRF: doc: Added note about disabling triggers before stream deinit
2016-05-22 19:20:28 -04:00
Jon Szymaniak
5502128b2b
libbladeRF: doc: Noted thread-safe proerties of API groups
2016-05-22 19:20:28 -04:00
Jon Szymaniak
c398f28466
libbladeRF: doc: Moved Error codes section
2016-05-22 19:20:28 -04:00
Jon Szymaniak
086b169be2
libbladeRF: doc: Moved bootloader group after loading/programming
...
These are loosely related enough to be grouped closer together.
2016-05-22 19:20:28 -04:00
Jon Szymaniak
b0e7111abf
libbladeRF: doc: Moved "Misc" function group
2016-05-22 19:20:28 -04:00
Jon Szymaniak
5ea3f34a99
libbladeRF: doc: Created and updated RX/TX module group
2016-05-22 19:20:28 -04:00
Jon Szymaniak
7134873170
libbladeRF: doc: Moved Expansion IO functions
...
These are more appropriately located near the expansion board
controls.
2016-05-22 19:20:28 -04:00
Jon Szymaniak
535bc44210
libbladeRF: doc: Moved XB functions to their own group.
2016-05-22 19:20:28 -04:00
Jon Szymaniak
055bbef224
libbladeRF: doc: Moved calibration and correction fns to a group
2016-05-22 19:20:28 -04:00
Jon Szymaniak
c787bc05da
libbladeRF: doc: Renamed "Triggers and synchronization" section
2016-05-22 19:20:28 -04:00
Jon Szymaniak
31fdb8819d
libbladeRF: doc: Moved SMB clock port and trigger groups up
2016-05-22 19:20:28 -04:00
Jon Szymaniak
8fb9ab0808
libbladeRF: doc: Moved bladerf_lpf_mode to bandwidth section
2016-05-22 19:20:28 -04:00
Jon Szymaniak
7547edb967
libbladeRF: doc: Moved loopback items to their own group
2016-05-22 19:20:28 -04:00
Jon Szymaniak
f230efce7a
libbladeRF: doc: Moved tuning functions to their own group
2016-05-22 19:20:28 -04:00
Jon Szymaniak
2390f7b187
libbladeRF: Added missing CALL_CONV to bladerf_set_usb_reset_on_open()
2016-05-22 19:20:28 -04:00
Jon Szymaniak
c4e904c2b6
libbladeRF: doc: Moved "devinfo" functions to init/deinit group
...
The use of bladerf_devinfo is generally part of initialization
code. Thus it is more appropriate to include these functions in
this group.
2016-05-22 19:20:28 -04:00
Jon Szymaniak
fdb37c0a21
libbladeRF: doc: Moved bladerf_dev_speed to device properties API section
2016-05-22 19:20:28 -04:00
Jon Szymaniak
fe48d9a49f
libbladeRF: doc: Moved device property functions up in API header
2016-05-22 19:20:27 -04:00
Jon Szymaniak
d945cc8d1b
libbladeRF: doc: Moved bandwidth functions to their own API doc group
2016-05-22 19:20:27 -04:00
Jon Szymaniak
3ef5d7e98c
libbladeRF: doc: Moved sampling control API items to their own group
2016-05-22 19:20:27 -04:00
Jon Szymaniak
92be0c70f6
libbladeRF: doc: Moved gain functions to their own API section
2016-05-22 19:20:27 -04:00
Jon Szymaniak
77c59a09d2
libbladeRF: Added SMB clock control API functions
...
Added API functions to configure SMB clock port (J62).
Moved SMB frequency tuning functions to this group in the header.
2016-05-17 00:20:01 -04:00
Jon Szymaniak
931afdf194
libbladeRF: Added high-level trigger implementation
...
This commit introduces high-level triggering API functions. This allows
multiple devices to be configured to synchornously start RX/TX
operations based upon the assertion of an external I/O signal.
This higher level API is intended to decouple usage from the underlying
register interface and provide some provisions for future
development of other trigger signals (both as official and user
customizations HW/SW customizations).
The general usage of this API is as follows:
1. Create a bladerf_trigger structure for each trigger in the entire
system. bladerf_trigger_init() may be used to initialize this
structure.
2. Arm 1 trigger master device via bladerf_trigger_arm().
3. Arm trigger slaves via bladerf_trigger_arm().
4. Configure and start sample streams. No samples will be
transmitted or received until the trigger fires. Ensure
the timeouts used are sufficiently large.
5. Fire the trigger on the master device via bladerf_trigger_fire().
6. Transmit and receive samples.
7. Re-arm triggers via bladerf_trigger_arm() and repeat 5-6 as
needed.
8. Disable triggering by setting each trigger's role to
BLADERF_TRIGGER_ROLE_DISABLED and then calling
bladerf_trigger_arm(dev, false);
2016-05-17 00:20:01 -04:00
Jan Dohl
89aa27b38d
libbladeRF: Added low-level trigger control functionality
2016-05-16 23:50:01 -04:00
Jon Szymaniak
cc1fcad6e9
libbladeRF: Updated description of DIV2 bit
...
This bit only has an effect in FPGA versions <= v0.1.2.
2016-04-26 11:57:47 -04:00
Robert Ghilduta
672aeef231
libbladeRF: Add XB300 Amplifier support
...
The XB-300 is an amplifier board that features a Low Noise Amplifier, a
Power Amplifier, a TX power monitor, and a 2:1 combiner for RX reception
along a TRX path. The TRX path has to be configured to TX for the PA to
output.
2016-04-20 18:20:09 -04:00
Jon Szymaniak
d8c1b52726
libbladeRF: Updated version to v1.6.1
...
Bumped patch version to denote bug fixes.
2016-04-11 13:32:07 -04:00
Jon Szymaniak
db00227aef
libbladeRF: Updated version to v1.6.0
...
Minor version increment to denote support for new VID/PID
2016-04-07 11:56:58 -04:00
Jon Szymaniak
d5a481f982
libbladeRF: Corrected LIBBLADERF_API_VERSION mismatch. Updated to v1.5.3.
2016-04-06 16:26:52 -04:00
Jon Szymaniak
872759540d
libbladeRF: Updated to v1.5.1
2016-01-07 16:49:57 -05:00
Jon Szymaniak
088f12ba93
libbladeRF: Added LIBBLADERF_API_VERSION
...
This macro provides API users with a compile-time means to check
the API version. It is intended to help with compile-time feature
detection.
2015-12-30 22:31:16 -05:00
Jon Szymaniak
25530a3f4e
libbladeRF: Added additional details to function descriptions
2015-12-28 23:15:44 -05:00
Jon Szymaniak
ccce423cff
libbladeRF: Added BLADERF_MODULE_INVALID enumeration value
2015-12-28 22:20:20 -05:00
Jon Szymaniak
ad147e2b28
libbladeRF: Added BLADERF_DC_CAL_INVALID enumeration value
2015-12-28 22:20:20 -05:00
Jon Szymaniak
2161248943
libbladeRF: Added API call to read firmware log data
...
bladerf_get_fw_log() allows API users to retrieve firmware log
data and write it to a file.
2015-12-28 16:10:39 -05:00