The streaming test allows for cross testing between MIMO, SISO, TX, RX, meta,
and non-meta configurations.
Example: TX a CW at 50MSPS and at a frequency of (915MHz+50MHz/16) with meta enabled
./output/libbladeRF_test_streaming -te -s 50M
Example: TX and RX at 25MSPS and at a frequency of (915MHz+25MHz/16) without meta enabled
./output/libbladeRF_test_streaming -tr -s 25M
The gain calibration table will compare the serial number in the CSV
with the serial number of the opened device. A warning will be issued
if the serial numbers do not match.
If the the file location is not specified, using a NULL file location,
then try loading the expected default file name from one of the
find_file locations.
The test renames the files to the default serial based file names and
stores them alongside the binary (one of the find_file locations).
Adds the gain calibration tables along with the prototype for
bladerf_load_gain_calibration(). Also copies the stored calibration
references to the output directory.
This isolates the gain differentiation on init from the CLI or Gnuradio.
Refer to the instructions below.
Instructions:
cd bladeRF/host/libraries/libbladeRF_test/test_gain_compare/
python -m venv env
source ./env/bin/activate
pip3 install -r requirements.txt
cd bladeRF/host/build
make -j`nproc` && sudo make install
./output/libbladeRF_test_gain_compare
cd ../libraries/libbladeRF_test/test_gain_compare/
mv ~/code/bladeRF/host/build/dual_test.bin .
python3 view_binary.py -n 2
This provides a way to test MIMO and SISO power measurements through
the CLI. The power for both channels under SISO and MIMO should be
about the same.
Instructions
---------------
python -m venv env
source ./env/bin/activate
pip install -r requirements.txt
Ch1 & Ch2:
bladeRF-cli -s bladerf_script_ch12.sh
python view_binary.py -n 2
Ch1:
bladeRF-cli -s bladerf_script_ch1.sh
python view_binary.py -n 1
Ch2:
bladeRF-cli -s bladerf_script_ch2.sh
python view_binary.py -n 1
Resolved the compiler warning caused by comparing
getopt_long's return value with a char. Changed 'c'
from char to int to correctly handle -1 return values.
Fixes#952
The setup_env.sh and requirements.txt files are copied to build/output.
Ex:
$ ./output/setup_env.sh
$ source nuand/bin/activate
$ python ./output/libbladeRF_test_txrx_hwloop.py
Accommodates the following warning issued by CMake v3.27.1.
CMake Deprecation Warning:
Compatibility with CMake < 3.5 will be removed from a
future version of CMake.
No assertions found, therefore the test is empirical at commit. It
instantiates a sample_stream_tb instance essentially serving as a
sample_stream_tb wrapper.