* host: libbladeRF: add functions to get/set ADF4002 refclk frequency
* host: bladeRF-cli: add print/set adf_refclk
* host: python: add adf4002_refclk functions
This permits getting and setting the ADF4002 reference clock
frequency.
>>> import bladerf
>>> b = bladerf.BladeRF()
ad9361_init : AD936x Rev 2 successfully initialized
>>> b.adf4002_refclk
10000000
>>> b.adf4002_refclk = 9000000
>>> b.adf4002_refclk
9000000
>>> b.adf4002_refclk = 900000000
[ERROR @
"/home/rtucker/dev/privatebladeRF/host/libraries/libbladeRF/src/board/bladerf2/bladerf2.c":4360]
bladerf_adf4002_set_refclk: bladerf_adf4002_calculate_ratio failed:
Provided parameter was out of the allowable range
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
File
"/home/rtucker/dev/privatebladeRF/host/libraries/libbladeRF_bindings/python/bladerf.py",
line 1581, in set_adf4002_refclk
_check_error(ret)
File
"/home/rtucker/dev/privatebladeRF/host/libraries/libbladeRF_bindings/python/bladerf.py",
line 998, in _check_error
raise globals()[errorval.name](err)
bladerf.RangeError: Provided parameter was out of the allowable range
>>> b.adf4002_refclk
9000000
>>> b.adf4002_refclk = 10000000
>>> b.adf4002_refclk
10000000
* host: libbladeRF: make ADF convenience functions static
bladerf_adf4002_set_refclk is much nicer (and safer) than calculating
the R/N ratio and then doing a bladerf_adf4002_configure.
* host: python: update cffi header block
* host: libbladeRF-bindings/python: general updates
This commit adds the following changes:
Overall:
* Adds an _import_header.py tool, which parses libbladeRF.h (or other
headers) into a convenient string ready for ffi.cdef
* Passes pycodestyle and pyflakes checks cleanly
bladerf.py:
* Various new class wrappers for enums, etc
* Subclassed exceptions (e.g. bladerf.UnsupportedError will be raised if
libbladeRF returns BLADERF_ERR_UNSUPPORTED)
* Added functions for bootloader firmware recovery
* More comments all around
* Use properties instead of getters/setters:
>>> b = bladerf.BladeRF()
>>> # OLD:
>>> b.get_devinfo()
>>> b.set_clock_select(ClockSelect.External)
>>> # NEW:
>>> b.devinfo
>>> b.clock_select = ClockSelect.External
* Added more functions, particularly for bladeRF 2
* Added a Channel class, for channel-specific properties:
>>> b = bladerf.BladeRF()
>>> ch = d.Channel(bladerf.CHANNEL_RX(0))
>>> ch.frequency = 2.45e9
bladerf-tool.py:
* General changes to use properties instead of get_/set_ functions
* Also updated to use subclassed exceptions from bladerf.py
* Dump a lot more info with the 'info' command
* Look for bootloader devices with the 'probe' command
* Added 'recover_fw' command, for firmware recovery
* Moved from single-channel paradigm to MIMO paradigm on 'rx', 'tx'
* host: python: implement more methods, various fixes
Implement loopback, rx_mux, ad9361_temperature, and adf4002_* functions
Fix set_clock_select type handling
Use 4-space indent in cffi block, for placating text editors
Add -v option to bladerf-tool.py info, to clean things up a bit
Assume an A4 for now.
This lets one stash hostedxA4.rbf into <install_prefix>/share/Nuand/bladeRF
and have it Do The Right Thing for autoloading.
Full implementation will depend on SPI flash, etc