Latch the data heading to the DAC, so that it is valid when the AD9361
interface expects it.
This addresses a bug in single-channel TX mode where samples would get
rearranged under some circumstances.
* hdl: bladeRF-micro: adjust pin layout for rev1.1 hw
Update the pinouts for adi_{rx,tx}_spdt{1,2}_v{1,2} to reflect move from
bank 5A to banks 5B/4A
Move INA219 I2C pins to bank 5A
Move ADP2384 sync pins to bank 7A
Move ADF4002 control pins to bank 5A
* hdl: bladeRF-micro: move {rx,tx}_bias_en from bank 7A to 5A
rx_bias_en moves from J11 to R22
tx_bias_en moves from A13 to R21
* hdl: bladeRF-micro: move mini_exp{1,2}, rm c5_clock1
In Bank 7A,
c5_clock1 is deleted from H16
mini_exp1 moves from J18 to H16
mini_exp2 moves from J17 to H15
* hdl: bladeRF-micro: remove refs to c5_clock1
* hdl: bladeRF-micro: set max toggle rate for SPDT switches
Fixes Critical Warning (12888) for high estimated crosstalk
on adi_rx_data[1] by adi_{rx,tx}_spdt{1,2}_v[{1,2}]
Changed from "output" to "inout" to accept inputs. In this mode, the
GPIO has two independent buses, one for input, one for output. In order
to maintain previous behavior, which allowed the Nios to read the
current values being output, we must explicitly feed back the output bus
to the input bus.
Add bladerf_p.vhd package, which handles nios_gpio packing and unpacking
between bits and record elements. This consolidates bit-to-function
mapping, making it easier to modify the mapping in the future.
This package also defines the FIFO record types and the nios_system
component for easier re-use.
Delete empty SOPC directories created by Quartus during IP core
generation. These empty directories are created in the user's home
directory and can accumulate if left unchecked. Use `find' with
approprate filters to (hopefully) avoid deleting anything important!
Quartus supports different build flows. Adding support for that so that
a user can choose to simply generate the project files, run synthesis
only (e.g. to check syntax), or do the full place and route to generate
programming files.
The project revision option specified on the command line was not being
passed to the build Tcl file.
Changed handling of message suppression files. Filename should be the
same as the revision name. Instead of managing potentially several
identical or nearly identical .srf files, just manage the one and have
the build script rename it when copying it to the build directory.
Fixed references to the nios_system.qip file in bladerf-fsk_bridge.qip
and bladerf-qpsk_tx.qip.
- Add "board" as a required option in help text
- The description of the SignalTap force option was vague.
- Added check for null argument.
- Do not print full usage information for an invalid option.
Beginning in Quartus 14.0, the NiosII processor split into two versions:
Classic and Gen 2. Development of new features for the Classic ceased in
Quartus 14.0. Nuand upgraded to the Gen 2 core for the release of the
bladeRF micro. The Gen 2 core does not have an option for the
Small (NiosII/s) implementation, so the option was removed from the
build script.
Nuand may add a NiosII/s approximation of the NiosII/f in the
future. This will happen quicker if we get requests to do so. :)
The Quartus version specified in the platform.conf file is the minimum
expected Quartus version for the platform to build successfully.
Older versions may or may not work, your mileage may vary!!
When performing loopback tests, it is likely that the loopback FIFO will
fill up, causing undetected sample loss. This commit checks for this
condition and pauses the flow of TX samples until the RX side can catch
up.