Commit graph

21 commits

Author SHA1 Message Date
Robert Ghilduta
82c5bfd68d CHANGELOG 2023.02 update 2023-02-13 03:48:56 -08:00
Robert Ghilduta
87173784e0 CHANGELOG 2021.10 update 2022-04-03 19:39:10 -07:00
Robert Ghilduta
a3d5c55fb7 CHANGELOG 2020.12 update 2020-12-23 20:46:12 -08:00
Robert Ghilduta
72fc963a68 CHANGELOG 2019.07 update 2019-07-31 18:28:25 -05:00
Rey Tucker
5f8d8bbfe8 bladeRF 2018.12-rc2 2018-12-21 17:47:47 -05:00
Rey Tucker
db24d41023 bladeRF 2018.10-rc1
This release introduces new functionality and bug fixes, generally expanding
support for the bladeRF 2.0 Micro. It consists of the following versions:

    * FPGA bitstream                v0.9.0
    * FX3 firmware                  v2.3.1
    * libbladeRF                    v2.1.0
    * bladeRF-cli                   v1.7.0
    * MATLAB & Simulink bindings    v1.0.2
    * Python bindings               v1.1.0

Note to bladerf1 (x40/x115) users: AGC will not work with FPGA versions
older than v0.8.0, due to a change in the control register mapping. A warning
will be printed during device initialization if you are using an affected
FPGA version.

Summary of changes since 2018.08:

* FPGA
    - Support for the ADS-B core on bladeRF micro
    - Add metadata flags for miniexp{1,2} IO pin status
    - Fix race condition during FX3/Nios UART initialization
    - Fix bugs in bladeRF AGC control
    - Timing closure improvements
    - Build system fixes

* FX3
    - Fix USB device reset interrupting SPI flash autoloading of FPGA images
    - Add BLADE_USB_CMD_QUERY_FLASH_ID command
    - Add BLADE_USB_CMD_QUERY_FPGA_SOURCE command

* libbladeRF
    - API additions:
        - Add format macros for bladerf_frequency and bladerf_timestamp
        - Add 'manufacturer' and 'product' device description strings to
          bladerf_devinfo struct
        - Add bladerf_get_serial_struct() API function
        - Add bladerf_get_flash_size() API function
        - Add bladerf_trigger_signal values for J51-1 (bladerf2) and Miniexp-1
          (generic)
        - Add bladerf_get_fpga_source() API function
        - Add meta RX hardware flags for underflow, miniexp{1,2}
    - Fixes:
        - bladerf2: support TX frequencies down to 47 MHz
        - bladerf2: support sample rates down to 0.521 Msps
        - bladerf1: fix BLADERF_GPIO_AGC_ENABLE
        - bladerf2: fix bladerf_trigger_arm implementation
        - streaming: extend USB transfer timeout to match the configured stream
          timeout
    - Misc:
        - Install the doxygen docs, if generated
        - Adjust RX gain mode lists for clarity
        - bladerf1: implement bladerf_{get,set}_rf_port[s]
        - bladerf1: skip initialization if BLADERF_FORCE_NO_FPGA_PRESENT is set

* bladeRF-cli
    - Add libedit support
    - Ensure device is initialized after deferred open
    - info: display manufacturer, product, flash size
    - print: show RF routing on bladerf1
    - print: display supported ranges for sample rate, bandwidth, frequency
    - probe: handle already-open devices
    - version: display FPGA configuration source

* MATLAB & Simulink bindings
    - Add missing BB_TXVGA1_RXLPF loopback option
    - Fix tx_gain property handling in simulink

* Python
    - Fix rx_channel_count, tx_channel_count
    - Update with latest API functions

* Windows installer
    - install-drivers: install a driver for the bootloader VID/PID (04b4:00f3),
      allowing easier FX3 bootloader recovery operations
    - Upgrade to libusb 1.0.22
2018-10-30 17:12:29 -04:00
Rey Tucker
32058c4726 bladeRF 2018.08
This release introduces new functionality and bug fixes, particularly support
for the bladeRF 2.0 Micro product. It consists of the following versions:

    * FPGA bitstream                v0.7.3
    * FX3 firmware                  v2.2.0
    * libbladeRF                    v2.0.2
    * bladeRF-cli                   v1.6.1
    * MATLAB & Simulink bindings    v1.0.1
    * Python bindings               v1.0.1

*****************************************************************************
***      libbladeRF v2.0 introduces a number of breaking changes !!       ***
*****************************************************************************
*** Please see relnotes_2_0 in the Doxygen documentation for a full       ***
*** discussion of the changes in libbladeRF v2.0.                         ***
*****************************************************************************

Summary of changes since 2016.06:

* FPGA
    - Added support for Automatic Gain Control
    - Redesign build system to support multiple product models
    - Initial release with bladeRF Micro support
    - Refactoring, bug fixes, and other misc. improvements

* FX3
    - Add support for the bladeRF 2.0 (2cf0:5250).
    - Fix loading FPGA bitstreams from flash when there is nothing connected to
      the USB connector.
    - Move USB descriptor consts to .usbdscr section so the linker glomps them.

* libbladeRF
    - Added support for Automatic Gain Control
    - Added bladeRF.conf config option file
    - Refactor to support for multiple product lines
    - Add support for the bladeRF Micro product
    - API: replace bladerf_module with bladerf_channel, a reverse-compatible
      change to handle products with multiple independent RF paths in the same
      direction
    - API: BREAKING CHANGE - on bladerf_set_frequency, et al, the frequency
      parameter is now uint64_t instead of unsigned int
    - Add typedefs for common param types, e.g. bladerf_frequency -> uint64_t

* bladeRF-cli
    - Added support for Automatic Gain Control
    - No longer initializes the bladeRF before loading a new FPGA image, to
      avoid potential catch-22 problems
    - bladeRF 2.0 Micro support
    - Support for MIMO RX and TX using "channel=" parameter on rx/tx config
    - Various code quality fixups

* MATLAB & Simulink bindings
    - Add support for bladeRF 2.0 (Micro) products
    - Change "not supported" (-8) library errors to Matlab warnings
      temporarily, to permit some grace while others' scripts are updated.
    - Update bladeRF_XCVR to use new unified gain control
    - Add bladeRF_Misc for misc measurements and controls
    - Update bladeRF_rx_gui to support unified gain
    - Update Simulink block to match libbladeRF v2.0.0

* Python
    - New in 2018.08
2018-08-30 18:09:11 -04:00
Rey Tucker
3584d261ca bladeRF 2018.08-rc3
--------------------------------------------------------------------------------
 2018.08-rc3 (2018-08-24)
--------------------------------------------------------------------------------

Bugfix release candidate.

    * FPGA bitstream                v0.7.3
    * FX3 firmware                  v2.2.0
    * libbladeRF                    v2.0.1
    * bladeRF-cli                   v1.6.1
    * MATLAB & Simulink bindings    v1.0.1
    * Python bindings               v1.0.1

libbladeRF v2.0.1:
 * Detect and handle a bladeRF Micro that is running old firmware to allow
   re-flashing without recovery mode (#578)
 * bladeRF1: bladerf_set_gain_mode returning BLADERF_ERR_UNSUPPORTED is no
   longer fatal (#542)
 * bladeRF1: only check AGC DC LUT setting when enabling AGC
 * bladeRF1: typo fix in set_tx_gain (#580)
 * xb200: check for null xb_data before dereferencing it (#575)
 * bladeRF2: cache factory trimdac value at initialization; preserve trimdac
   disable state on bladerf2_trim_dac_write (#582)
 * bladeRF2: bladerf_clock_select: replace CLOCK_SELECT_VCTCXO with
   CLOCK_SELECT_ONBOARD for clarity (#585)
 * Improvements to the release notes (#583)
 * bladeRF-cli: Add 200 ms delay before probing PLL lock status (#587)
 * Windows: add a nanosleep() shim (#589)

bladeRF-cli v1.6.1:
 * "set loopback" help dialog aware of board type (#566)
 * host: libbladeRF: Rename clock select option
 * host: bladeRF-cli: Add 200 ms delay before probing PLL lock status (#587)
 * host: add nanosleep shim for Windows (#589)

MATLAB v1.0.1:
 * host: libbladeRF: Rename clock select option

Python v1.0.1:
 * host: libbladeRF: Rename clock select option
2018-08-24 16:22:13 -04:00
Rey Tucker
4079d8af78 bladeRF 2018.03-alpha1
This version is part of development series of changes, not an official
release.

    * FPGA bitstream                v0.7.2
    * FX3 firmware                  v2.1.0
    * libbladeRF                    v1.9.1
    * bladeRF-cli                   v1.5.2
    * MATLAB & Simulink bindings    v0.1.3
    * Python bindings               v0.9.1
2018-03-26 16:30:42 -04:00
Jon Szymaniak
ab12ebd3fb bladeRF 2016.06 release 2016-06-29 17:24:49 -04:00
Jon Szymaniak
9a2b6d8b1f bladeRF 2016.01-rc1 release 2016-01-07 17:04:10 -05:00
Jon Szymaniak
c917d33dbc Updated top-level CHANGELOG and debian/changelog for 2015.07 release 2015-07-25 16:47:45 -04:00
Jon Szymaniak
b6cf480fcd Updated top-level CHANGELOG and debian/ for 2015-06-RC1 release 2015-06-30 19:56:40 -04:00
Jon Szymaniak
f18831594c Updated top-level CHANGELOG and debian/changelog for 2015.02 release 2015-02-28 16:26:31 -05:00
Jon Szymaniak
4e78b0596f Updated top-level CHANGELOG and debian/changelog for 2015.01-rc2 release 2015-01-31 17:05:59 -05:00
Jon Szymaniak
06703b2398 Fixed top-level CHANGELOG typo 2014-12-23 14:17:44 -05:00
Jon Szymaniak
66ee549790 Updated top-level CHANGELOG and debian/changelog for 2014.12-rc1 release 2014-12-23 14:09:06 -05:00
Jon Szymaniak
2864bcc59f Updated top-level CHANGELOG and debian/changelog for 2014.11 release 2014-11-30 16:18:43 -05:00
Jon Szymaniak
ff7b6ccb39 Updated top-level CHANGELOG for 2014.11-rc3 2014-10-30 22:36:24 -04:00
Jon Szymaniak
dddc72f1c6 Updated CHANGELOG for bladeRF-2014.09-rc2 2014-07-24 22:59:24 -04:00
Jon Szymaniak
8eefd673a8 Added top-level CHANGELOG containing summary of 2014.09-rc1 2014-07-05 14:44:40 -04:00