#!/bin/bash cat << EOF To be able to run NiOS's Eclipse the following steps must be taken: #1) ./build_bladerf.sh must finish successfully #2) Ensure eclipse-nios2 is installed. Read Intel's guide at: https://www.intel.com/content/altera-www/global/en_us/index/support/support-resources/knowledge-base/tools/2019/why-does-the-nios--ii-not-installed-after-full-installation-of-t.html #3) ./launch_eclipse.sh must be called from hdl/quartus and provided with a path to the build directory, see ./launch_eclipse.sh for example #4) Once Eclipse is launched, go to File -> Import -> General -> Existing Projects into Workspace. #5) Click "Select root directory" and supply the path to the bladeRF git repository. #6) Select and import 2 projects: the bladeRF_nios_bsp project and the corresponding bladeRF project for the target bladeRF: a) bladeRF_nios_bsp should be in hdl/fpga/platforms/common/bladerf/software/bladeRF_nios_bsp/ b) bladeRF (select hdl/fpga/platforms/bladerf for bladeRF 1.0 targets, select hdl/fpga/platforms/bladerf-micro for bladeRF 2.0 targets) #7) Once imported and available on the Project Explorer pane, right click "bladeRF_nios_bsp" and select "Nios II" -> "Generate BSP" #8) Right click "bladeRF" in the Project Explorer pane, and select "Build Project" Optionally to debug, #1) Right click "bladeRF" in the Project Explorer pane, and select "Debug As" -> "Debug Configurations..." #2) Right click "Nios II Hardware" and select "New", select "New_configuation" #3) Under the "Project" tab, fill in the path to the recently generated Nios II ELF file #4) Under the "Target connection" tab, check "Ignore mismatched system ID" and "Ignore mismatched system timestamp" #5) Find USB-Blaster in "Connections", click "Refresh Connections" if it does not show up #6) "Debug" button should be clickable If on Linux, consider adding a udev rule to grant access to the USB-Blaster to the plugdev group by adding two lines to /etc/udev/rules.d/91-usb.rules: # Altera ATTR{idVendor}=="21a9", ATTR{idProduct}=="1004", MODE="660", GROUP="plugdev" NOTE: The current user should be in 'plugdev' group. EOF if [[ -z ${QUARTUS_ROOTDIR+x} ]] ; then echo "Could not find Quartus root directory. Is $0 being called from a nios2_command_shell.sh ?" exit 1 fi if [[ ! `which eclipse-nios2` ]] ; then echo "elcipse-nios2 cannot be found. It may have to be manually installed"; echo "Please try: https://www.intel.com/content/altera-www/global/en_us/index/support/support-resources/knowledge-base/tools/2019/why-does-the-nios--ii-not-installed-after-full-installation-of-t.html"; exit 1 fi if [[ "$#" -ne 1 ]] ; then echo "Usage: $0 " echo " NOTE: ./build_bladerf.sh must complete successfully before running this script." echo "" echo "Example: $0 work/bladerf-micro-A4-hosted/" echo "" if [[ -d work/ ]] ; then echo "Found the following potential build directories:" for i in `find work/ -maxdepth 1 -type d | grep -v '^work/$'`; do echo " $i"; done echo "" fi exit 1 fi if [[ ! -f $1/settings.bsp ]] ; then echo "Error could not find settings.bsp in '$1'. '$1' may not be a correct build directory."; echo " ./build_bladerf.sh may have to be run again." exit 1 fi if [[ ! -f $1/nios_system.sopcinfo ]] ; then echo "Error could not find nios_system.sopcinfo in '$1'. '$1' may not be a correct build directory."; echo " ./build_bladerf.sh may have to be run again." exit 1 fi export WORKDIR=$1 cp $1/settings.bsp $1/nios_system.sopcinfo ../fpga/platforms/common/bladerf/software/bladeRF_nios_bsp/ sed -i 's/# CMAKE generated file: DO NOT EDIT!/unexport LD_LIBRARY_PATH/g' $1/libad936x/Makefile eclipse-nios2