[NAME] bladeRF-cli - command line interface and test utility [DESCRIPTION] The \fBbladeRF-cli\fP utility is used to flash firmware files, load FPGA bitstreams, and perform other tasks on the nuand bladeRF software-defined radio system\&. [EXAMPLES] .PP $ bladeRF-cli -l hostedx40.rbf .IP Loads an FPGA image named hostedx40.rbf onto the bladeRF's FPGA. \fBNote\fP: The FPGA image loaded with --load-fpga will be lost on power-off. .PP $ bladeRF-cli -f firmware.img .IP Flashes firmware.img onto the bladeRF's firmware. .PP $ bladeRF-cli -L hostedx40.rbf .IP Flashes the FPGA image named hostedx40.rbf onto the bladeRF, where it will be automatically loaded on power-up. [INTERACTIVE COMMANDS] bladeRF-cli supports a scriptable interactive mode. Run \fBbladeRF-cli --interactive\fP to enter this mode. Type "\fBhelp\fP" for a listing of all commands, or "\fBhelp \fP" for more information about .