# bladeRF Source # This repository contains all the source code required to program and interact with a bladeRF platform, including firmware for the Cypress FX3 USB controller, HDL for the Altera Cyclone IV FPGA, and C code for the host side libraries, drivers, and utilities. The source is organized as follows: | Directory | Description | | ----------------- |:--------------------------------------------------------------------------------------------------| | [firmware_common] | Source and header files common between firmware and host software | | [fx3_firmware] | Firmware for the Cypress FX3 USB controller | | [hdl] | All HDL code associated with the Cyclone IV FPGA | | [host] | Host-side libraries, drivers, utilities and samples | ## Quick Start ## 1. Clone this repository via: ```git clone https://github.com/Nuand/bladeRF.git``` 2. Fetch the latest pre-built bladeRF [FPGA image]. See the README.md in the [hdl] directory for more information. 3. Fetch the latest pre-built bladeRF [firmware image]. See the README.md in the [fx3_firmware] directory for more information. 4. Follow the instructions in the [host] directory to build and install libbladeRF and the bladeRF-cli utility. 5. Attach the bladeRF board to your fastest USB port. After flashing firmware, be sure to press the reset button or unplug/replug the device. 6. If you haven't upgraded your firmware, run ```bladeRF-flash -f ```. This upgrade is required to utilize libusb support. Be sure to reset or power-cycle the board after flashing the firmware. - If your board is stuck in the FX3 bootloader or is at factory firmware or v1.2, see [bladeRF-flash] for additional details. 7. You should now be able to see your device in the list output via ```bladeRF-cli -p``` 8. See the overview of the [bladeRF-cli] for more information about loading the FPGA and using the command line interface tool
*Coming Soon: Quick Start information for GNU Radio support via gr-osmosdr* In the meantime, see the **Building GNURADIO from GIT** section of [kb3gtn's bladeRF setup guide] for information on this. [firmware_common]: ./firmware_common (Host-Firmware common files) [fx3_firmware]: ./fx3_firmware (FX3 Firmware) [hdl]: ./hdl (HDL) [host]: ./host (Host) [FPGA image]: http://nuand.com/fpga (Pre-built FPGA images) [firmware image]: ./fx3_firmware/README.md#pre-built-firmware-binaries (Pre-build firmware binaries) [bladeRF-cli]: ./host/utilities/bladeRF-cli (bladeRF Command Line Interface) [bladeRF-flash]: ./host/utilities/bladeRF-flash (bladeRF Flashing Utility) [kb3gtn's bladeRF setup guide]: http://forum.nuand.com/forums/viewtopic.php?f=9&t=2992 (kb3gtn's bladeRF setup guide)