############################################################################### # Python ConfigParser (.ini) configuration file ############################################################################### # ----------------------------------------------------------------------------- # Common configuration options # ----------------------------------------------------------------------------- [common] # Verbosity levels: # silent, critical, error, warning, info, debug, verbose libbladerf_verbosity = WARNING # ----------------------------------------------------------------------------- # bladeRF1 FPGAs # ----------------------------------------------------------------------------- [bladerf1-load-fpga] enable = False image_40kle = ./hostedx40.rbf image_150kle = ./hostedx115.rbf # ----------------------------------------------------------------------------- # bladeRF2 FPGAs # ----------------------------------------------------------------------------- [bladerf2-load-fpga] enable = False image_49kle = ./hostedxA4.rbf image_301kle = ./hostedxA9.rbf [bladerf2-tx] enable = False tx_channel = 0 tx_frequency = 2.350e9 tx_bandwidth = 56.0e6 tx_samplerate = 61.44e6 tx_gain = 30 tx_repeats = 10e6 tx_file = ./tx.bin [bladerf2-rx] enable = False rx_channel = 0 rx_frequency = 2.325e9 rx_bandwidth = 56.0e6 rx_samplerate = 61.44e6 rx_gain = 0 rx_num_samples = 1e6 rx_file = ./rx.bin [bladerf2-txrx] enable = True # tx_channel and rx_channel lists must be equal lengths because each value # in tx_channel will be matched up with the value at the same index in # rx_channel. For example, let tx_channel = [x, y] and rx_channel = [p, q]. # During the first iteration, tx_channel will be 'x' and rx_channel will # be 'p'. On the next iteration, they will be 'y' and 'q', respectively. tx_channel = 0, 1 rx_channel = 0, 1 # Frequency list. TX and RX must be equal lengths and follows the # same pattern as above. tx_frequency = 1535e6, 4500e6 rx_frequency = 1537e6, 4502e6 # TX settings tx_bandwidth = 56.0e6 tx_samplerate = 61.44e6 tx_gain = 30 tx_repeats = 0 tx_file = /dev/urandom # RX settings rx_bandwidth = 56.0e6 rx_samplerate = 61.44e6 rx_gain = 0 rx_gainmode = manual rx_num_samples = 25e6 # Filename for receive samples may be either explicitly given, or 'auto'. If # explicitly given, all samples will be concatenated into the one file. If # 'auto', the filename will be generated automatically based on the enabled # channels and frequency (e.g. rx_r0t0_2500M.bin). rx_file = auto