774 lines
25 KiB
Text
774 lines
25 KiB
Text
================================================================================
|
|
libbladeRF Change Log Summary
|
|
|
|
For more detailed information, please see the git change log and issue tracker
|
|
hosted on GitHub: https://github.com/Nuand/bladeRF
|
|
================================================================================
|
|
|
|
v2.2.0 (2018-12-21)
|
|
--------------------------------
|
|
|
|
This version of libbladeRF is intended for use with:
|
|
|
|
FX3 Firmware v2.3.1
|
|
FPGA v0.10.2
|
|
|
|
New features include:
|
|
|
|
* FPGA-based RFIC Control on the bladerf2 family:
|
|
This version adds FPGA-based tuning for the bladeRF 2.0 micro family. This
|
|
tuning mode has a number of advantages over host-based tuning:
|
|
|
|
* Faster command processing: the Nios II processor on the FPGA handles the
|
|
RFIC control directly, instead of relaying SPI commands between the host
|
|
and RFIC. This improves turnaround time slightly.
|
|
|
|
* State preservation: the device itself maintains the RFIC state, so
|
|
closing and re-opening the device no longer requires reinitialization. In
|
|
practice, this is about a 7.5x speedup when doing a "warm" open of an
|
|
already-initialized device.
|
|
|
|
* Headless operation: the Nios II processor on the FPGA is now able to
|
|
control the RFIC (and the rest of the system) autonomously.
|
|
|
|
The previous mode is still available by calling bladerf_set_tuning_mode()
|
|
with `BLADERF_TUNING_MODE_HOST`, or by setting
|
|
`BLADERF_DEFAULT_TUNING_MODE=host` in the environment.
|
|
|
|
* Quick Tune is now supported on the bladerf2 family:
|
|
The quick tune functionality permits rapid hopping between frequencies, by
|
|
saving the state of the RFIC's tuning parameters to memory and then rapidly
|
|
switching to them at a given time.
|
|
|
|
Please refer to the documentation for bladerf_get_quick_tune(),
|
|
bladerf_schedule_retune(), and bladerf_cancel_scheduled_retunes() for more
|
|
information.
|
|
|
|
* Configuration file: `biastee_rx` and `biastee_tx` options added
|
|
|
|
API changes since v2.1.0:
|
|
* Quick Tuning on bladerf2:
|
|
- `struct bladerf_quick_tune` updated with parameters for bladeRF2
|
|
* Flash access:
|
|
- These functions require a `struct bladerf *` as the first parameter:
|
|
bladerf_alloc_image(), bladerf_alloc_cal_image(), bladerf_image_write()
|
|
- Added: bladerf_read_flash_bytes(), bladerf_erase_flash_bytes(),
|
|
bladerf_write_flash_bytes(), bladerf_get_fpga_bytes()
|
|
- Deprecated: bladerf_read_flash(), bladerf_erase_flash(),
|
|
bladerf_write_flash()
|
|
|
|
Bug fixes:
|
|
* libusb.c: fix unread status variable warning (#693)
|
|
* bladerf2.c: fix typo in _check_total_sample_rate (#692)
|
|
* bladerf1.c: fix null ptr dereference (#696)
|
|
* bladerf1.c: improve AGC-unavailable messaging (#686)
|
|
* bladerf{1,2}.c: bladerf_load_fpga: release mutex on error (#680)
|
|
* bladerf1.c: fix apportioning of overall gain via bladerf_set_gain()
|
|
* bladerf2.c: fix overeager FIR filter management in bladerf_set_sample_rate()
|
|
* flash.c: FPGA images are now flashable on xA9 boards (#571)
|
|
|
|
v2.1.0 (2018-10-30)
|
|
--------------------------------
|
|
|
|
This version of libbladeRF is intended for use with:
|
|
|
|
FX3 Firmware v2.3.1
|
|
FPGA v0.9.0
|
|
|
|
Note to bladerf1 (x40/x115) users: AGC will not work with FPGA versions
|
|
older than v0.8.0, due to a change in the control register mapping. A warning
|
|
will be printed during device initialization if you are using an affected
|
|
FPGA version.
|
|
|
|
API additions:
|
|
* Add format macros for bladerf_frequency and bladerf_timestamp (#623)
|
|
* Add 'manufacturer' and 'product' device description strings to
|
|
bladerf_devinfo struct (#624)
|
|
* Add bladerf_get_serial_struct() API function (#382)
|
|
* Add bladerf_get_flash_size() API function (#634)
|
|
* Add bladerf_trigger_signal values for J51-1 (bladerf2) and Miniexp-1
|
|
(generic) (#656)
|
|
* Add bladerf_get_fpga_source() API function (#662)
|
|
|
|
Changes:
|
|
* bladerf2: Support TX frequencies down to 47 MHz (#598)
|
|
* bladerf2: Support sample rates down to 0.521 MSps (#593)
|
|
* docs: install the doxygen documentation (#597)
|
|
* Adjust RX gain mode lists for clarity (#601)
|
|
* bladerf1: Fix BLADERF_GPIO_AGC_ENABLE (#607)
|
|
* Moved FN_RF_PORTS into the FN_LOW_LEVEL section of API docs
|
|
* bladerf1: implemented bladerf_{get,set}_rf_port[s] (#600, #608, #625)
|
|
* bladerf2: fix bladerf_trigger_arm implementation (#633)
|
|
* backend/nios: reduce verbose logging spew (#647)
|
|
* backend/libusb: return partial info if we can't open the device during
|
|
lusb_probe() (#648)
|
|
* bladerf1: skip initialization if BLADERF_FORCE_NO_FPGA_PRESENT is set (#651)
|
|
* streaming: extend USB transfer timeout to match the configured stream
|
|
timeout (#659)
|
|
* backend/dummy, backend/cyapi: fix wrong get_flash_id fptrs (#670)
|
|
* common: include pthread.h in nanosleep.h (#669) (#671)
|
|
* thirdparty/adi: fix OSX and FreeBSD compilation issue
|
|
* streaming: add meta RX hardware flags for underflow, miniexp{1,2}
|
|
|
|
v2.0.2 (2018-08-30)
|
|
--------------------------------
|
|
|
|
This version of libbladeRF is intended for use with:
|
|
|
|
FX3 Firmware v2.2.0
|
|
FPGA v0.7.3
|
|
|
|
There are no functional changes since v2.0.1, although there are changes to
|
|
the API documentation and the cmake build scripts.
|
|
|
|
Changes:
|
|
* Improve bladerf_gain_mode documentation (#595)
|
|
* Don't warn about libusb version on FreeBSD (#594)
|
|
|
|
v2.0.1 (2018-08-24)
|
|
--------------------------------
|
|
|
|
This version of libbladeRF is intended for use with:
|
|
|
|
FX3 Firmware v2.2.0
|
|
FPGA v0.7.3
|
|
|
|
This release contains minor fixes since v2.0.0.
|
|
|
|
Note to bladeRF2 users: If you are using bladerf_{get,set}_clock_select(),
|
|
please note that the enum for bladerf_clock_select has changed.
|
|
CLOCK_SELECT_VCTCXO has been replaced with CLOCK_SELECT_ONBOARD.
|
|
|
|
Changes:
|
|
* FreeBSD build fixes (#561)
|
|
* 32-bit architecture fixes (#573)
|
|
* Detect and handle a bladeRF Micro that is running old firmware to allow
|
|
re-flashing without recovery mode (#578)
|
|
* bladeRF1: bladerf_set_gain_mode returning BLADERF_ERR_UNSUPPORTED is no
|
|
longer fatal (#542)
|
|
* bladeRF1: only check AGC DC LUT setting when enabling AGC
|
|
* bladeRF1: typo fix in set_tx_gain (#580)
|
|
* xb200: check for null xb_data before dereferencing it (#575)
|
|
* bladeRF2: cache factory trimdac value at initialization; preserve trimdac
|
|
disable state on bladerf2_trim_dac_write (#582)
|
|
* bladeRF2: bladerf_clock_select: replace CLOCK_SELECT_VCTCXO with
|
|
CLOCK_SELECT_ONBOARD for clarity (#585)
|
|
* Improvements to the release notes (#583)
|
|
* bladeRF-cli: Add 200 ms delay before probing PLL lock status (#587)
|
|
* Windows: add a nanosleep() shim (#589)
|
|
|
|
v2.0.0 (2018-08-13)
|
|
--------------------------------
|
|
|
|
This version of libbladeRF is intended for use with:
|
|
|
|
FX3 Firmware v2.2.0
|
|
FPGA v0.7.3
|
|
|
|
Initial release supporting the bladeRF 2.0 series, which currently features the
|
|
bladeRF Micro A4 and the bladeRF Micro A9.
|
|
|
|
Please see the changes for 1.9.x, as well as doc/doxygen/relnotes_2_0.dox,
|
|
for a fuller summary of the changes since the last public release.
|
|
|
|
Changes:
|
|
* Add typedefs for common param types, such as bladerf_frequency -> uint64_t
|
|
* Use a double-pointer on the bladerf_get_*_range calls
|
|
* Omit unnecessary path elements on log printfs
|
|
* Add log_get_verbosity function
|
|
* Add detection of FPGA size for bladeRF Micro
|
|
|
|
v1.9.2 (2018-05-22)
|
|
--------------------------------
|
|
|
|
This version is part of development series of changes, not an official release.
|
|
|
|
Changes:
|
|
* Low level hardware control functions in bladeRF2.h have been renamed to be
|
|
hardware-independent
|
|
|
|
v1.9.1 (2018-03-26)
|
|
--------------------------------
|
|
|
|
This version is part of development series of changes, not an official release.
|
|
|
|
This version of libbladeRF is intended for use with:
|
|
|
|
FX3 Firmware v2.1.0 (or v1.9.1)
|
|
FPGA v0.7.2
|
|
|
|
Changes:
|
|
* Refactor to support for multiple product lines
|
|
* Add support for the bladeRF Micro product
|
|
* API: replace bladerf_module with bladerf_channel, a reverse-compatible
|
|
change to handle products with multiple independent RF paths in the same
|
|
direction
|
|
* API: BREAKING CHANGE - on bladerf_set_frequency, et al, the frequency
|
|
parameter is now uint64_t instead of unsigned int
|
|
* Significant code cleanup
|
|
* Various other changes that will be listed in more detail during an official
|
|
release
|
|
|
|
v1.9.0 (2017-12-07)
|
|
--------------------------------
|
|
|
|
This version of libbladeRF is intended for use with:
|
|
|
|
FX3 Firmware v2.0.0 (or v1.9.1)
|
|
FPGA v0.7.1
|
|
|
|
Changes:
|
|
* Added bladeRF.conf config option file
|
|
* Minor fix-ups
|
|
|
|
v1.8.0 (2017-07-01)
|
|
--------------------------------
|
|
|
|
This version of libbladeRF is intended for use with:
|
|
|
|
FX3 Firmware v2.0.0 (or v1.9.1)
|
|
FPGA v0.7.0
|
|
|
|
Changes:
|
|
* Added support for Automatic Gain Control
|
|
|
|
v1.7.2 (2016-06-29)
|
|
--------------------------------
|
|
|
|
This version of libbladeRF is intended for use with:
|
|
|
|
FX3 Firmware v2.0.0 (or v1.9.1)
|
|
FPGA v0.6.0
|
|
|
|
Changes:
|
|
* Fixed bladerf_open() BLADERF_ERR_IO issue that occured when autoloading from flash
|
|
* Additional documentation fixes
|
|
|
|
v1.7.1 (2016-05-28)
|
|
--------------------------------
|
|
|
|
This version of libbladeRF is intended for use with:
|
|
|
|
FX3 Firmware v2.0.0 (or v1.9.1)
|
|
FPGA v0.6.0
|
|
|
|
Changes:
|
|
* Non-functional API documentation (Doxygen) updates:
|
|
- Re-organized and simplified documentation layout
|
|
- Split "Control and Configuration" section into more cohesive sections
|
|
- Added clarifications and corrections
|
|
|
|
v1.7.0 (2016-05-22)
|
|
--------------------------------
|
|
|
|
This version of libbladeRF is intended for use with:
|
|
|
|
FX3 Firmware v2.0.0 (or v1.9.1)
|
|
FPGA v0.6.0
|
|
|
|
Changes:
|
|
* Added SMB clock control functionality
|
|
* Added synchronization trigger functionality
|
|
* Added XB-300 support
|
|
* Fixed NIOS 8x32 reads
|
|
* Cleaned up and reorganized API docs
|
|
|
|
v1.6.1 (2016-04-11)
|
|
--------------------------------
|
|
|
|
This version of libbladeRF is intended for use with:
|
|
|
|
FX3 Firmware v2.0.0 (or v1.9.1)
|
|
FPGA v0.5.0
|
|
|
|
Changes:
|
|
* Fixes for issues #465 and #458 (TX timeouts and assert() failures)
|
|
|
|
v1.6.0 (2016-04-07)
|
|
--------------------------------
|
|
|
|
This version of libbladeRF is intended for use with:
|
|
|
|
FX3 Firmware v2.0.0 (or v1.9.1)
|
|
FPGA v0.5.0
|
|
|
|
Changes:
|
|
* Updated to detect devices running firmware with new VID (2cf0) and PID (5246)
|
|
|
|
v1.5.3 (2016-04-06)
|
|
--------------------------------
|
|
|
|
This version of libbladeRF is intended for use with:
|
|
|
|
FX3 Firmware v1.9.1
|
|
FPGA v0.5.0
|
|
|
|
Changes:
|
|
* Corrected LIBBLADERF_API_VERSION mismatch from v1.5.2
|
|
|
|
v1.5.2 (2016-04-06)
|
|
--------------------------------
|
|
|
|
This version of libbladeRF is intended for use with:
|
|
|
|
FX3 Firmware v1.9.1
|
|
FPGA v0.5.0
|
|
|
|
Changes:
|
|
* Added FX3 Firmware v1.9.1 to version compatibility table.
|
|
|
|
v1.5.1 (2016-01-05)
|
|
--------------------------------
|
|
|
|
This version of libbladeRF is intended for use with:
|
|
|
|
FX3 Firmware v1.9.0
|
|
FPGA v0.5.0
|
|
|
|
Changes:
|
|
* Addressed warnings that occur with GCC -Os flag.
|
|
|
|
|
|
v1.5.0 (2015-12-31)
|
|
--------------------------------
|
|
|
|
This version of libbladeRF is intended for use with:
|
|
|
|
FX3 Firmware v1.9.0
|
|
FPGA v0.5.0
|
|
|
|
Changes:
|
|
* Added LIBBLADERF_API_VERSION macro to libbladeRF.h
|
|
- This is intended to assist with compile-time feature checks.
|
|
|
|
* Added VCTCXO taming control via 1 PPS or 10 MHz source
|
|
- bladerf_vctcxo_tamer_mode enumeration
|
|
- bladerf_set_vctcxo_tamer_mode(), bladerf_get_vctcxo_tamer_mode()
|
|
|
|
* Added API functions to set SMB clock to arbitrary frequency:
|
|
- bladerf_set_rational_smb_frequency()
|
|
- bladerf_get_rational_smb_frequency()
|
|
- bladerf_set_smb_frequency()
|
|
- bladerf_get_smb_frequency()
|
|
|
|
* Added non-blocking async buffer submission API function:
|
|
- bladerf_submit_stream_buffer_nb()
|
|
|
|
* Added API call to retreive firmware log and write it to a file:
|
|
- bladerf_get_fw_log()
|
|
|
|
* Added XB-100 pin/button/LED macro definitions and support via
|
|
bladerf_expansion_attach().
|
|
|
|
* Added BLADERF_ERR_PERMISSION. This is now returned in associated file
|
|
and device access failures.
|
|
|
|
* Added enumeration value entries:
|
|
- BLADERF_MODULE_INVALID, BLADERF_DC_CAL_INVALID
|
|
|
|
* Changed default frequencies
|
|
- RX: 2.447 GHz
|
|
- TX: 2.484 GHz
|
|
|
|
* Removed function prototypes for si5338 functions that removed long ago
|
|
|
|
* Fixed an issue where bladerf_sync_tx() was not using all available
|
|
host-side buffers; host-side buffering was only limited to the
|
|
number of requested transfers. This now uses all requested buffers.
|
|
|
|
* Fixed #415, #416, #417
|
|
|
|
* Misc. API documentation and example fixes.
|
|
|
|
|
|
v1.4.3 (2015-07-25)
|
|
--------------------------------
|
|
|
|
This version of libbladeRF is intended for use with:
|
|
|
|
FX3 Firmware v1.8.0
|
|
FPGA v0.3.4
|
|
|
|
Changes:
|
|
* Fixed zero-padding on end of bursts (#413)
|
|
* API documentation updates
|
|
|
|
|
|
v1.4.2 (2015-07-22)
|
|
--------------------------------
|
|
|
|
This version of libbladeRF is intended for use with:
|
|
|
|
FX3 Firmware v1.8.0
|
|
FPGA v0.3.3
|
|
|
|
Changes:
|
|
* Paths within the ${CMAKE_INSTALL_PREFIX} are now searched when looking
|
|
for an FPGA bitstream to autoload.
|
|
|
|
LIBBLADERF_SEARCH_PREFIX_OVERRIDE may be defined in the CMake invocation
|
|
to override the ${CMAKE_INSTALL_PREFIX}, which may be needed during
|
|
cross-builds.
|
|
|
|
The previously hard-coded locations have been kept in the search list,
|
|
but at a lower priority, to avoid breaking existing packaging scripts.
|
|
|
|
|
|
v1.4.1 (2015-07-16)
|
|
--------------------------------
|
|
|
|
This version of libbladeRF is intended for use with:
|
|
|
|
FX3 Firmware v1.8.0
|
|
FPGA v0.3.3
|
|
|
|
Changes:
|
|
* bladerf_open() and bladerf_open_with_devinfo() now support matching
|
|
a subset of a serial number.
|
|
|
|
* Fixed regression in XB-200 filter bank selection (#404)
|
|
|
|
* Fixed regression in exiting loopback mode (#405)
|
|
|
|
|
|
v1.4.0 (2015-06-30)
|
|
--------------------------------
|
|
|
|
This version of libbladeRF is intended for use with:
|
|
|
|
FX3 Firmware v1.8.0
|
|
FPGA v0.3.3
|
|
|
|
Changes:
|
|
* Fix bug in read NIOS 8x16 packet value
|
|
|
|
* Added API function for readback of current VCTCXO trim DAC value
|
|
(as opposed to calibration data from flash).
|
|
- bladerf_dac_read()
|
|
|
|
|
|
v1.3.1 (2015-06-18)
|
|
--------------------------------
|
|
This version of libbladeRF is intended for use with:
|
|
|
|
FX3 Firmware v1.8.0
|
|
FPGA v0.3.1
|
|
|
|
Changes:
|
|
* Added support for new NIOS II packet handlers introduced in FPGA v0.3.x
|
|
|
|
|
|
v1.3.0 (2015-06-18)
|
|
--------------------------------
|
|
This version of libbladeRF is intended for use with:
|
|
|
|
FX3 Firmware v1.8.0
|
|
FPGA v0.3.1
|
|
|
|
Changes:
|
|
* Added API calls for new frequency tuning support:
|
|
- bladerf_schedule_retune()
|
|
- bladerf_get_quick_tune()
|
|
- bladerf_set_tuning_mode()
|
|
|
|
* Added error code: BLADERF_ERR_FPGA_OP
|
|
- Denotes failure in operation performed on FPGA
|
|
|
|
* Logo included in repo for documentation build
|
|
|
|
v1.2.1 (2015-02-28)
|
|
--------------------------------
|
|
This version of libbladeRF is intended for use with:
|
|
|
|
FX3 Firmware v1.8.0
|
|
FPGA v0.1.2
|
|
|
|
Changes:
|
|
* Build fixes for MinGW (cross-compilation) and OSX
|
|
|
|
v1.2.0 (2015-01-31)
|
|
--------------------------------
|
|
This version of libbladeRF is intended for use with:
|
|
|
|
FX3 Firmware v1.8.0
|
|
FPGA v0.1.2
|
|
|
|
Changes:
|
|
* Added support for BLADERF_LOG_LEVEL environment variable. This controls
|
|
the default verbosity of libbladeRF and may be set to one of the following
|
|
strings: critical, error, warning, info, debug, verbose.
|
|
* Syslog support has been introduced to aid in debugging of applications that
|
|
suppress libbladeRF's stderr output. This can be enabled at compile-time
|
|
via the ENABLE_LIBBLADERF_SYSLOG CMake option, which defaults to OFF.
|
|
* Linux: A port reset is now performed when opening a device. This addresses
|
|
an issue where the bladeRF could not be opened after an application
|
|
crashes. (Fixes issue #95.)
|
|
* Fixed signal quality issues caused by LPF DC calibration comparators
|
|
being left on. Prior to the associated changes, significant images in the
|
|
spectrum could be observed prior to performing DC calibration routines.
|
|
* Fixed XB-200 signal attenuation issues that occurred when bypassing the
|
|
XB-200 mixer (i.e., operating in the normal bladeRF tuning range with
|
|
an XB-200 attached).
|
|
* LMS DC cal registers are now loaded from tables at every device open()
|
|
rather than just during the post-FPGA load initialization. This ensures
|
|
that values from updated tables are used.
|
|
* Fixed probe() implementation in Cypress backend to correctly report
|
|
devices that are already opened.
|
|
|
|
v1.1.0 (2014-12-23)
|
|
--------------------------------
|
|
This version of libbladeRF is intended for use with:
|
|
|
|
FX3 Firmware v1.8.0
|
|
FPGA v0.1.2
|
|
|
|
Changes:
|
|
* Added bladerf_get_bootloader_list() API function to allow applications to
|
|
detect devices in bootloader mode.
|
|
* Added bladerf_load_fw_from_bootloader() API function to allow applications
|
|
to download firmware to devices in bootloader mode.
|
|
* File searching (e.g., for host-based FPGA loading) now searches the
|
|
following, prior to the currently search paths:
|
|
- The directory specified by the BLADERF_SEARCH_DIR environment variable
|
|
- The current working directory
|
|
- The directory containing the running executable
|
|
* Removed library [INFO] message about detected devices in bootloader mode.
|
|
This is now done in the bladeRF-cli program.
|
|
* Fixed build issue that resulted in libusb version not being reported
|
|
correctly in verbose log output.
|
|
|
|
|
|
v1.0.0 (2014-11-29)
|
|
--------------------------------
|
|
This version of libbladeRF is intended for use with:
|
|
|
|
FX3 Firmware v1.8.0
|
|
FPGA v0.1.2
|
|
|
|
Changes:
|
|
* Major version number bumped to indicate stable API.
|
|
* Removed stdbool.h inclusion for C++ code in API header.
|
|
* Fixed USB control transfer issue that caused SPI flash corruption
|
|
in Windows when using libusb with the WinUSB driver.
|
|
* When an FPGA is autoloading from SPI flash, the bladerf_open() and
|
|
bladerf_open_with_devinfo() calls now wait for the autoload to complete.
|
|
* This requires FW v1.8.0.
|
|
|
|
v0.17.0 (2014-10-30)
|
|
--------------------------------
|
|
This version of libbladeRF is intended for use with:
|
|
|
|
FX3 Firmware v1.7.1
|
|
FPGA v0.1.1
|
|
|
|
Changes:
|
|
* Added support for CyUSB3/CyAPI backend
|
|
* Added timestamp metadata support to synchronous interface. This includes
|
|
modifications to the bladerf_metadata structure and the introduction of the
|
|
BLADERF_FORMAT_SC16_Q11_META format.
|
|
* libbladeRF functions have been made thread-safe.
|
|
* The Windows installation directory is now searched when performing
|
|
host-based FPGA and DC calibration file auto-loading.
|
|
* Improved log output; moved output to more appropriate levels and included
|
|
filename and line number log messages.
|
|
* Removed BLADERF_FORMAT_SC16Q12 reverse compatibility macro.
|
|
* Added macro definitions for FPGA configuration bits:
|
|
- BLADERF_GPIO_COUNTER_ENABLE
|
|
- BLADERF_GPIO_TIMESTAMP
|
|
- BLADERF_GPIO_TIMESTAMP_DIV2
|
|
* Fixed bugs that caused deadlocks and crashes.
|
|
* Fixed device probe/open functions to continue searching for devices
|
|
if a failing or busy device is encountered.
|
|
* Improved API documentation and included more complete example usages
|
|
of the synchronous interface. Snippets from programs in doc/examples are
|
|
now included in the Doxygen output.
|
|
|
|
|
|
v0.16.2 (2014-07-24)
|
|
--------------------------------
|
|
This version of libbladeRF is intended for use with:
|
|
|
|
FX3 Firmware v1.7.1
|
|
FPGA v0.0.6
|
|
|
|
Changes:
|
|
* Minor changes build with respect to OSX RPATH. This should not
|
|
affect Windows or Linux users.
|
|
|
|
|
|
v0.16.1 (2014-07-20)
|
|
--------------------------------
|
|
This version of libbladeRF is intended for use with:
|
|
|
|
FX3 Firmware v1.7.1
|
|
FPGA v0.0.6
|
|
|
|
Changes:
|
|
* Preliminary implementation of bladerf_set_gain() and XB-200 automatic
|
|
filterbank selection functions.
|
|
* Introduced FPGA and FX3 version compatibility checks and warnings messages
|
|
when incompatible/unknown versions are detected
|
|
* Fixed set/get loopback mode, with respect to firmware loopback functionality.
|
|
Firmware loopback now requires FW v1.7.1+
|
|
* Bug fixes for:
|
|
+ Frequency readback (when XB-200 is attached)
|
|
+ Read back of XB-200 path
|
|
+ Samplerate-transfer relationship equation in API docs
|
|
+ Version comparison routines
|
|
|
|
v0.16.0 (2014-07-04)
|
|
--------------------------------
|
|
* Added XB-200 support
|
|
* Added experimental DC calibration and DC calibration table support
|
|
* Added "software autoload" of FPGAs and DC cal tables from config directories
|
|
- In Linux & OSX the following directories are searched:
|
|
~/.config/Nuand/bladeRF/, ~/.Nuand/bladeRF/, /etc/Nuand/bladeRF/
|
|
- In Windows, %APPDATA%/Nuand/bladeRF is searched
|
|
* Added "File not found" (BLADERF_ERR_NO_FILE) return code
|
|
* Allow tuning up to 3.8GHz
|
|
* Fixed incorrect version checks
|
|
- This resolves issue where VCTCXO value stored in SPI Flash
|
|
isn't loaded when using FPGA v0.0.3.
|
|
* Fixed intermittent FPGA load failures
|
|
|
|
|
|
v0.15.0 (2014-05-17)
|
|
--------------------------------
|
|
* API changes:
|
|
- Added functions:
|
|
+ FPGA timestamp access (requires FPGA v0.0.4+)
|
|
+ Expansion board GPIO and SPI accessors (requires FPGA v0.0.4+)
|
|
- Added firmware loopback option (requires FX3 FW v1.7.0+)
|
|
- Changed SPI flash access functions
|
|
+ Functions now operate in units of erase blocks and pages
|
|
- Removed un-aligned accesses
|
|
* Overhauled backend interface to decouple device logic from libusb code.
|
|
- Moved code to a generic USB interface and libusb code under
|
|
that interface. This should allow host-specific drivers to be more
|
|
easily integrated.
|
|
* Addressed race conditions in the async RX/TX interface.
|
|
- pthreads is now a required dependency of libbladeRF.
|
|
* Bug fixes for the sync RX/TX interface
|
|
* Windows build and compatibility fixes
|
|
|
|
|
|
v0.14.0 (2014-03-08)
|
|
--------------------------------
|
|
* Added a new synchronous data transfer interface that operates atop the
|
|
existing asynchronous interface.
|
|
* Removed of bladerf_rx() and bladerf_tx() functions
|
|
- These have been replaced by bladerf_sync_rx() and bladerf_synx_tx()
|
|
* Renamed stream transfer timeout functions
|
|
|
|
|
|
v0.13.1 (2014-02-27)
|
|
--------------------------------
|
|
* Bug fixes for regressions introduced into LMS6002 code in v0.13.0
|
|
|
|
|
|
v0.13.0 (2014-02-13)
|
|
--------------------------------
|
|
* Refactored LMS code and loopback support
|
|
* Updated API calls to allow NULL for optional API parameters
|
|
* Added dummy backend
|
|
- This is intended for developers. It allows the library to build while
|
|
other backend code is disabled.
|
|
* Misc. minor bug fixes
|
|
|
|
|
|
v0.12.1 (2014-01-19)
|
|
--------------------------------
|
|
* Normalized DC offset functions to accept values in [-2048, 2048]
|
|
- Additional range checking added
|
|
|
|
|
|
v0.12.0 (2014-01-18)
|
|
--------------------------------
|
|
* API changes:
|
|
- Naming correction: BLADERF_IQ_CORR_* changed to BLADERF_CORR_*
|
|
- Removed unused bladerf_stats structure
|
|
- Fixed format misnomer: BLADERF_FORMAT_SC16_Q12 has been renamed to
|
|
BLADERF_FORMAT_SC16_Q11.
|
|
- Fixed names of transfer timeout functions:
|
|
get/set_transfer_timeout() -> bladerf_get/set_transfer_timeout()
|
|
|
|
* During initialization, the device is switched to USB_IF_NULL in order to
|
|
ensure it is in a known state.
|
|
|
|
|
|
v0.11.2 (2014-01-14)
|
|
--------------------------------
|
|
* Switch to USB_IF_NULL when closing a device to avoid issues when attempting
|
|
to reopen a device on OSX
|
|
|
|
|
|
v0.11.1(.1) (2014-01-05)
|
|
--------------------------------
|
|
* Fixed race conditions caused by use of bladerf_enable_module() in the
|
|
implementation of bladerf_stream(). Users are now responsible for
|
|
ensuring a module enabled before attempting to start a stream.
|
|
|
|
|
|
v0.11.0 (2013-12-28)
|
|
--------------------------------
|
|
* Added support for reading back an FPGA version number
|
|
* Explicitly define calling conventions on API functions (Windows)
|
|
* Fixed build for libusbx-1.0.9
|
|
- Misc build and code fixes for libusb detection and version checks
|
|
* Sped up SPI flash writes
|
|
* Decreased default library verbosity
|
|
|
|
v0.10.0 (2013-11-28)
|
|
--------------------------------
|
|
* Added API support for initializing, backing up, and restoring the
|
|
calibration data stored in SPI flash
|
|
* Fixed incorrect definition of FPGA region of SPI flash
|
|
* Fixed RPATH issue in OSX
|
|
* License changed to LGPLv2.1
|
|
|
|
v0.9.0 (2013-10-21)
|
|
--------------------------------
|
|
* Added option to disable log output at compile-time
|
|
* Added BLADERF_LOG_LEVEL_SILENT to disable log output at run-time
|
|
|
|
v0.8.0 (2013-10-21)
|
|
--------------------------------
|
|
* Added API functions to get/set stream transfer timeouts
|
|
* Fixed Win64 build issues
|
|
* Fixes for various bugs in LMS code
|
|
|
|
v0.7.0 (2013-10-14)
|
|
--------------------------------
|
|
* Added API function to flash FPGA image (to allow for autoloading)
|
|
* Improved frequency tuning algorithm
|
|
* Fixes for flash-related code
|
|
|
|
v0.6.2 (2013-10-04)
|
|
--------------------------------
|
|
* Fixed memory leaks
|
|
|
|
v0.6.1 (2013-10-04)
|
|
--------------------------------
|
|
* Corrected access of firmware version info
|
|
|
|
v0.6.0 (2013-10-03)
|
|
--------------------------------
|
|
* Added bladerf_version structure to API and modified version
|
|
accessors to use this structure.
|
|
* LMS bug fixes
|
|
* Backwards compatibility and MSVC compatibility fixes
|
|
|
|
v0.5.0 (2013-09-22)
|
|
--------------------------------
|
|
* Internal changes to support major refactoring of FX3 code
|
|
* Fixed sample count on initial TX callback
|
|
|
|
v0.4.0 (2013-09-18)
|
|
--------------------------------
|
|
* Added asynchronous data transfer interface to API
|
|
* Added device identifier matching routines to API
|
|
|
|
v0.3.0 (2013-08-13)
|
|
--------------------------------
|
|
* Transitioned to CMake-based build
|
|
* Introduced libusb support
|