bladeRF/host/libraries/libbladeRF_test/test_quick_retune/main.c
Rey Tucker 9665189852 host: libbladeRF_test/quick_retune: add ctrl-C handler; modernize
aborting without calling bladerf_close() causes some confusion
with FPGA-based RFIC control.  this likely needs dealt with at
the protocol level, but in the meantime, we can ensure that
bladerf_close() happens and everything spins down by trapping
ctrl-C.

also shift to using BLADERF_CHANNEL_TX(0) instead of
BLADERF_MODULE_TX, BLADERF_TX_X1 for sync_config, and
other minor tweaks
2018-12-12 16:42:52 -05:00

239 lines
7.2 KiB
C

/*
* This file is part of the bladeRF project:
* http://www.github.com/nuand/bladeRF
*
* Copyright (C) 2015 Nuand LLC
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#include <stdlib.h>
#include <stdio.h>
#include <string.h>
#include <inttypes.h>
#include <signal.h>
#include <libbladeRF.h>
#include "conversions.h"
#include "host_config.h"
#define VERBOSITY BLADERF_LOG_LEVEL_INFO
#define BUF_LEN 4096
#define TIMEOUT_MS 2500
#define ITERATIONS 10000
/* Dwell time at each frequency (us) */
#define DWELL_TIME_US 0
typedef struct {
bladerf_frequency f;
struct bladerf_quick_tune qt;
} freq;
/* Pick the frequency around which each hop frequency will be computed
* Select this to ensure hops cross a high/low band boundary */
#define BLADERF1_CENTER_FREQ ((bladerf_frequency) 1.500e9)
#define BLADERF2_CENTER_FREQ ((bladerf_frequency) 3.000e9)
/* Number of hop frequencies to generate */
#define NUM_FREQS 16
/* Spacing between hop frequencies */
#define FREQ_INCREMENT ((bladerf_frequency) 0.500e6)
bool is_running = true;
void sig_handler(int signo)
{
if (signo == SIGINT) {
fprintf(stderr, "received SIGINT\n");
if (!is_running) {
fprintf(stderr, "received another SIGINT, aborting\n");
abort();
}
is_running = false;
}
}
int run_test(struct bladerf *dev)
{
const char *board_name;
int status;
freq freqs[NUM_FREQS];
//int hopseq[] = {7, 2, 14, 1, 11, 15, 3, 5, 12, 13, 0, 4, 6, 8, 9, 10};
int hopseq[] = {0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15};
int16_t *samples = NULL;
unsigned int i, f;
bladerf_frequency center_freq;
samples = malloc(2 * BUF_LEN * sizeof(samples[0]));
if (samples == NULL) {
perror("malloc");
return BLADERF_ERR_MEM;
}
/* Just send a carrier tone */
for (i = 0; i < (2 * BUF_LEN); i += 2) {
samples[i] = samples[i+1] = 1448;;
}
status = bladerf_sync_config(dev, BLADERF_TX_X1,
BLADERF_FORMAT_SC16_Q11,
16, 4096, 8, TIMEOUT_MS);
if (status != 0) {
fprintf(stderr, "Failed to initialize sync i/f: %s\n",
bladerf_strerror(status));
goto out;
}
board_name = bladerf_get_board_name(dev);
if (strcmp(board_name, "bladerf1") == 0) {
center_freq = BLADERF1_CENTER_FREQ;
} else if (strcmp(board_name, "bladerf2") == 0) {
center_freq = BLADERF2_CENTER_FREQ;
} else {
fprintf(stderr, "Unknown board name: %s\n", board_name);
goto out;
}
/* Calculate the hop frequencies */
printf("Hop Set:\n");
for( f = 0; f < NUM_FREQS; f++ ) {
if( f < (NUM_FREQS/2) ) {
freqs[f].f = center_freq - ((NUM_FREQS/2)*FREQ_INCREMENT) +
(f*FREQ_INCREMENT);
} else {
freqs[f].f = center_freq + ((f-(NUM_FREQS/2)+1)*FREQ_INCREMENT);
}
printf("freq[%2u]=%" PRIu64 "\n", f, freqs[f].f);
}
/* Get the quick tune data */
for( f = 0; f < NUM_FREQS; f++ ) {
if (!is_running) {
fprintf(stderr, "Stopping test...\n");
status = 0;
goto out;
}
status = bladerf_set_frequency(dev, BLADERF_CHANNEL_TX(0), freqs[f].f);
if (status != 0) {
fprintf(stderr, "Failed to set frequency to %" PRIu64 ": %s\n",
freqs[f].f, bladerf_strerror(status));
goto out;
}
status = bladerf_get_quick_tune(dev, BLADERF_CHANNEL_TX(0),
&freqs[f].qt);
if (status != 0) {
fprintf(stderr, "Failed to get quick tune %u: %s\n",
f, bladerf_strerror(status));
goto out;
}
}
/* Enable and run! */
status = bladerf_enable_module(dev, BLADERF_CHANNEL_TX(0), true);
if (status != 0) {
fprintf(stderr, "Failed to enable module: %s\n",
bladerf_strerror(status));
goto out;
}
for (i = 0; i < ITERATIONS; i++) {
for( f = 0; f < NUM_FREQS; f++ ) {
if (!is_running) {
fprintf(stderr, "Stopping test...\n");
status = 0;
goto out;
}
if( DWELL_TIME_US > 999999 ) {
printf("hopseq[%u] = %u\n", f, hopseq[f]);
if (strcmp(board_name, "bladerf2") == 0) {
printf("nios_profile = %u, rffe_profile = %u\n",
freqs[hopseq[f]].qt.nios_profile,
freqs[hopseq[f]].qt.rffe_profile);
}
}
status = bladerf_schedule_retune(dev, BLADERF_CHANNEL_TX(0),
BLADERF_RETUNE_NOW, 0,
&freqs[hopseq[f]].qt);
if (status != 0) {
fprintf(stderr, "Failed to perform quick tune to index %u: "
"%s\n", hopseq[f], bladerf_strerror(status));
goto out;
}
status = bladerf_sync_tx(dev, samples, BUF_LEN, NULL, 3500);
if (status != 0) {
fprintf(stderr, "Failed to TX data: %s\n",
bladerf_strerror(status));
goto out;
}
usleep(DWELL_TIME_US);
}
}
out:
free(samples);
bladerf_enable_module(dev, BLADERF_CHANNEL_TX(0), false);
return status;
}
int main(int argc, char *argv[])
{
int status;
struct bladerf *dev = NULL;
const char *devstr = NULL;
if (argc > 1 && (!strcmp(argv[1], "-h") || !strcmp(argv[1], "--help"))) {
fprintf(stderr, "TX a tone across %d frequencies.\n", NUM_FREQS);
fprintf(stderr, "Usage: %s [device string]\n", argv[0]);
return 1;
} else {
devstr = argv[1];
}
if (signal(SIGINT, sig_handler) == SIG_ERR) {
fprintf(stderr, "Unable to catch SIGINT signals\n");
}
bladerf_log_set_verbosity(VERBOSITY);
status = bladerf_open(&dev, devstr);
if (status != 0) {
fprintf(stderr, "Unable to open device: %s\n",
bladerf_strerror(status));
return status;
}
status = run_test(dev);
bladerf_close(dev);
return status;
}