bladeRF/host/libraries/libbladeRF/doc/examples/open_via_serial.c
Rey Tucker 85fd6da22a
host: fix builds on 32-bit platforms (#573)
Builds were failing in various ways on 32-bit platforms, due to various assumptions (and the fact that pretty much everything is 64-bit nowadays). This PR should fix all of them so that it builds clean.

* host: libbladeRF/thirdparty/adi: fix build error on 32-bit systems

sizeof(void*) is not necessarily equal to sizeof(uint64_t)

* host: libbladeRF/doc: fix 32-bit build failure on doc example

sizeof(size_t) does not always equal sizeof(uint64_t)

* host: docker: remove centos-7-i386 build

it doesn't work, and this is an edgy-enough case that i think we'll be
okay with the ubuntu i386 builds

* host: libbladeRF/bladerf2: explicitly note constant types

On non-64-bit platforms, these integer constants can be ambiguous, which
throws compiler warnings.

* host: libbladeRF_test: explicitly note constant types

On non-64-bit platforms, these integer constants can be ambiguous, which
throws compiler warnings.
2018-08-16 18:57:52 -04:00

150 lines
4.3 KiB
C

/*
* Example of how to open a device with the specified serial number
*
* This file is part of the bladeRF project:
* http://www.github.com/nuand/bladeRF
*
* Copyright (C) 2014 Nuand LLC
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#include <inttypes.h>
#include <libbladeRF.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include "example_common.h"
/** [example_snippet] */
struct bladerf *open_bladerf_from_serial(const char *serial)
{
int status;
struct bladerf *dev;
struct bladerf_devinfo info;
/* Initialize all fields to "don't care" wildcard values.
*
* Immediately passing this to bladerf_open_with_devinfo() would cause
* libbladeRF to open any device on any available backend. */
bladerf_init_devinfo(&info);
/* Specify the desired device's serial number, while leaving all other
* fields in the info structure wildcard values */
strncpy(info.serial, serial, BLADERF_SERIAL_LENGTH - 1);
info.serial[BLADERF_SERIAL_LENGTH - 1] = '\0';
status = bladerf_open_with_devinfo(&dev, &info);
if (status == BLADERF_ERR_NODEV) {
printf("No devices available with serial=%s\n", serial);
return NULL;
} else if (status != 0) {
fprintf(stderr, "Failed to open device with serial=%s (%s)\n", serial,
bladerf_strerror(status));
return NULL;
} else {
return dev;
}
}
/** [example_snippet] */
static int print_device_state(struct bladerf *dev)
{
int status;
uint64_t frequency;
unsigned int bandwidth;
struct bladerf_rational_rate rate;
const bladerf_channel rx_ch = BLADERF_CHANNEL_RX(0);
const bladerf_channel tx_ch = BLADERF_CHANNEL_TX(0);
status = bladerf_get_frequency(dev, rx_ch, &frequency);
if (status != 0) {
return status;
}
printf(" RX frequency: %" PRIu64 " Hz\n", frequency);
status = bladerf_get_frequency(dev, tx_ch, &frequency);
if (status != 0) {
return status;
}
printf(" TX frequency: %" PRIu64 " Hz\n", frequency);
status = bladerf_get_bandwidth(dev, rx_ch, &bandwidth);
if (status != 0) {
return status;
}
printf(" RX bandwidth: %u Hz\n", bandwidth);
status = bladerf_get_bandwidth(dev, tx_ch, &bandwidth);
if (status != 0) {
return status;
}
printf(" TX bandwidth: %u Hz\n", bandwidth);
status = bladerf_get_rational_sample_rate(dev, rx_ch, &rate);
if (status != 0) {
return status;
}
printf(" RX sample rate: %" PRIu64 " %" PRIu64 "/%" PRIu64 " sps\n",
rate.integer, rate.num, rate.den);
status = bladerf_get_rational_sample_rate(dev, tx_ch, &rate);
if (status != 0) {
return status;
}
printf(" TX sample rate: %" PRIu64 " %" PRIu64 "/%" PRIu64 " sps\n",
rate.integer, rate.num, rate.den);
return 0;
}
int main(int argc, char *argv[])
{
int status = 0;
struct bladerf *dev;
if (argc != 2) {
fprintf(stderr, "Usage: %s <serial #>\n", argv[0]);
return 1;
}
dev = open_bladerf_from_serial(argv[1]);
if (dev) {
printf("Opened device successfully!\n");
status = print_device_state(dev);
}
if (status != 0) {
fprintf(stderr, "Error: %s\n", bladerf_strerror(status));
}
if (dev) {
bladerf_close(dev);
}
return status;
}