bladeRF/fx3_firmware/gdb/gdbinit_sample
Jon Szymaniak ea15c91c25 fx3_firmware: Use CMake for project configuration and Makefile generation
The combination of CMake and a custom Makefile/toolchain.mk was messy.

This change is to achieve better consistency with the CMake-oriented
workflow of the remainder of the project software and to make it easier
to maintain and change in the future. (CMake options may be used to
enable/disable features.)
2016-04-06 16:06:06 -04:00

45 lines
923 B
Text

# This sample .gdbinit file based upon the one provided in Cypress's
# FX3 Programmer's Manual, found here:
# http://www.cypress.com/?rID=57990
#
# Symlink or rename this file to ".gdbinit" in the directory from
# which you're running arm-none-eabi-gdb.
set prompt (arm-gdb)
# Segger J-Link
target remote localhost:2331
# OpenOCD
# target remote localhost:3333
# monitor halt
monitor speed 1000
monitor endian little
set endian little
monitor reset
# Set the processor to SVC mode
monitor reg cpsr =0xd3
# Disable all interrupts
monitor memU32 0xFFFFF014 =0xFFFFFFFF
# Enable the TCMs
monitor memU32 0x40000000 =0xE3A00015
monitor memU32 0x40000004 =0xEE090F31
monitor memU32 0x40000008 =0xE240024F
monitor memU32 0x4000000C =0xEE090F11
# Configure the FX3 SYSCLK
monitor memU32 0xE0052000 = 0x00080115
# Add a delay to let the clock stabilize.
monitor sleep 1000
set $pc =0x40000000
si
si
si
si
load
break main