bladeRF USB 3.0 Superspeed Software Defined Radio Source Code http://nuand.com
  • C 45.8%
  • VHDL 21%
  • Verilog 15.8%
  • Tcl 3.8%
  • MATLAB 3.2%
  • Other 10.3%
Find a file
Jon 00b7c67aed linux_driver: change when the buffers are marked as valid
This commit initializes RX buffers as valid at creation and when RX is
(re)enabled.
2013-07-24 02:53:15 -07:00
common fix HS buffering 2013-07-22 03:45:40 -07:00
fx3_firmware doc: Touched up top-level README, added Eclipse info to FX3 README 2013-07-17 00:00:43 -04:00
hdl hdl: adjust the number of cycles spent copying data in HS case 2013-07-23 02:02:14 -07:00
linux linux_driver: change when the buffers are marked as valid 2013-07-24 02:53:15 -07:00
.gitignore cli: peek/poke an print/set combined into single files. 2013-07-06 04:50:38 -07:00
COPYING FSK bridge example 2013-02-18 20:11:39 -08:00
README.md doc: Touched up top-level README, added Eclipse info to FX3 README 2013-07-17 00:00:43 -04:00

bladeRF Source

This repository contains all the source code required to program and interact with a bladeRF platform, including firmware for the Cypress FX3 USB controller, HDL for the Altera Cyclone IV FPGA, and C code for the host side driver, library, and command line interface.

The source is organized as follows:

Directory Description
common Source and header files common across the platform
fx3_firmware Firmware for the Cypress FX3 USB controller
hdl All HDL code associated with the Cyclone IV FPGA
linux The linux kernel driver, library and command-line interface for interacting with a bladeRF device

Building Procedure

Each subsection of the source code can be built by itself and maintains their own README files for building. The recommended build flow is as such: