bladeRF/host
2013-09-07 13:26:14 -04:00
..
cmake Added pthreads-win32, and getopt/getopt_long to Windows build. 2013-09-03 00:19:39 -04:00
common common: Default to VERBOSE logging for now. 2013-09-07 13:26:14 -04:00
drivers/linux Fixed missing bracket and c&p error in bladeRF.c, removed dup defines, moved define from .c to .h 2013-09-01 20:58:33 +02:00
libraries cli: Only disable TX and RX if the FPGA is configured. 2013-09-07 13:15:55 -04:00
misc udev: Single rule for both libusb and Linux driver-based support. 2013-08-22 21:26:22 -04:00
utilities cli: Only disable TX and RX if the FPGA is configured. 2013-09-07 13:15:55 -04:00
CMakeLists.txt host: Disabled file and line information from log messages by default. 2013-09-04 01:33:41 -04:00
README.md bladeRF-cli: Added simple non-tecla based interactive mode support 2013-09-04 01:08:20 -04:00

bladeRF Host Source

This directory contains the items outlined in the following table. Note that this structure includes some items planned for future development.

Directory Description
cmake CMake scripts and modules
drivers Device drivers for supported operating systems
libraries The main bladeRF support library and supplemental libraries
misc Miscellaneous files
utilities Applications and tools

Dependencies

libUSB

libusb-1.0 and its development headers are required. >= v1.0.12 is recommended for Linux, and >= v1.0.13 is recommended for Windows. Ideally, the latest released version is always recommended. Please see the libusb ChangeLog for more information.

CMake

CMake is used to build the items in this directory.

Ubuntu/Debian:

sudo apt-get install libusb-1.0.0 libusb-1.0.0-dev cmake

Build

From this directory, create a 'build' directory. This is personal preference, of course. It allows for all build files to be cleaned up via a single rm -r build/ command. Next, run cmake to configure the build, followed by make and sudo make install to build and install libraries and applications.

mkdir -p build
cd build
cmake [options] ../
make
sudo make install

Below is a list of useful and project-specific CMake options. Please see the CMake variable list in CMake's documentation for more information.

Option Description
-DCMAKE_BUILD_TYPE=<type> Set to "Debug" to enable a debug build. "Release" is the default.
-DCMAKE_C_COMPILER=<compiler> Specify the compiler to use. Otherwise, CMake will determine a default.
-DENABLE_GDB_EXTENSIONS=<ON/OFF> GCC & GDB users may want to set this to use -ggdb3 instead of -g. Disabled by default.
-DENABLE_BACKEND_LIBUSB=<ON/OFF> Enables libusb backend in libbladeRF. Enabled by default.
-DENABLE_BACKEND_LINUX_DRIVER=<ON/OFF> Enables Linux driver in libbladeRF. Disabled by default.
-DENABLE_LIBTECLA=<ON/OFF> Enable libtecla support in the bladeRF-cli program. Default: ON if libtecla is detected, OFF otherwise.
-DINSTALL_UDEV_RULES=<ON/OFF> Install udev rules to /etc/udev/rules.d/. Default: ON for Linux, OFF default otherwise.