bladeRF USB 3.0 Superspeed Software Defined Radio Source Code http://nuand.com
  • C 45.8%
  • VHDL 21%
  • Verilog 15.8%
  • Tcl 3.8%
  • MATLAB 3.2%
  • Other 10.3%
Find a file
Rey Tucker 10d0f549b2
host: add bladerf_adf4002_{get,set}_refclk and related functionality (#15)
* host: libbladeRF: add functions to get/set ADF4002 refclk frequency

* host: bladeRF-cli: add print/set adf_refclk

* host: python: add adf4002_refclk functions

This permits getting and setting the ADF4002 reference clock
frequency.

>>> import bladerf
>>> b = bladerf.BladeRF()
ad9361_init : AD936x Rev 2 successfully initialized
>>> b.adf4002_refclk
10000000
>>> b.adf4002_refclk = 9000000
>>> b.adf4002_refclk
9000000
>>> b.adf4002_refclk = 900000000
[ERROR @
"/home/rtucker/dev/privatebladeRF/host/libraries/libbladeRF/src/board/bladerf2/bladerf2.c":4360]
bladerf_adf4002_set_refclk: bladerf_adf4002_calculate_ratio failed:
Provided parameter was out of the allowable range
Traceback (most recent call last):
  File "<stdin>", line 1, in <module>
  File
"/home/rtucker/dev/privatebladeRF/host/libraries/libbladeRF_bindings/python/bladerf.py",
line 1581, in set_adf4002_refclk
    _check_error(ret)
  File
"/home/rtucker/dev/privatebladeRF/host/libraries/libbladeRF_bindings/python/bladerf.py",
line 998, in _check_error
    raise globals()[errorval.name](err)
bladerf.RangeError: Provided parameter was out of the allowable range
>>> b.adf4002_refclk
9000000
>>> b.adf4002_refclk = 10000000
>>> b.adf4002_refclk
10000000

* host: libbladeRF: make ADF convenience functions static

bladerf_adf4002_set_refclk is much nicer (and safer) than calculating
the R/N ratio and then doing a bladerf_adf4002_configure.

* host: python: update cffi header block
2018-03-23 11:10:14 -04:00
debian Update copyright date ranges to include 2017 2017-12-21 12:55:05 -05:00
doc doc: minor typo fix 2017-12-21 12:55:05 -05:00
firmware_common firmware_common: add bladerf2 usb pid 2017-12-21 12:54:55 -05:00
fpga_common fpga_common: fix overrun in 16x64 NIOS II packet packing 2017-12-21 12:54:57 -05:00
fx3_firmware fx3_firmware v2.1.0: add bladeRF 2.0 support 2017-12-21 12:55:05 -05:00
hdl hdl: fx3_gpif: fix off-by-one in metafifo handling 2018-03-22 18:42:40 -04:00
host host: add bladerf_adf4002_{get,set}_refclk and related functionality (#15) 2018-03-23 11:10:14 -04:00
legal Update copyright date ranges to include 2017 2017-12-21 12:55:05 -05:00
.clang-format clang-format: minor tweak for brackets on lists 2017-12-21 12:55:09 -05:00
.gitignore gitignore: Cleanup 2017-12-21 16:17:54 -05:00
CHANGELOG bladeRF 2016.06 release 2016-06-29 17:24:49 -04:00
CMakeLists.txt fx3_firmware: Use CMake for project configuration and Makefile generation 2016-04-06 16:06:06 -04:00
CONTRIBUTORS CONTRIBUTORS: self-updating 2017-08-02 18:06:21 -04:00
COPYING COPYING: Touched up the text and specifically referenced items 2014-10-31 10:50:31 -04:00
README.md Update CMake options in READMEs (#285) 2014-07-27 13:32:49 -04:00

bladeRF Source

This repository contains all the source code required to program and interact with a bladeRF platform, including firmware for the Cypress FX3 USB controller, HDL for the Altera Cyclone IV FPGA, and C code for the host side libraries, drivers, and utilities. The source is organized as follows:

Directory Description
firmware_common Source and header files common between firmware and host software
fx3_firmware Firmware for the Cypress FX3 USB controller
hdl All HDL code associated with the Cyclone IV FPGA
host Host-side libraries, drivers, utilities and samples

Quick Start

  1. Clone this repository via: git clone https://github.com/Nuand/bladeRF.git
  2. Fetch the latest pre-built bladeRF FPGA image. See the README.md in the hdl directory for more information.
  3. Fetch the latest pre-built bladeRF firmware image. See the README.md in the fx3_firmware directory for more information.
  4. Follow the instructions in the host directory to build and install libbladeRF and the bladeRF-cli utility.
  5. Attach the bladeRF board to your fastest USB port.
  6. You should now be able to see your device in the list output via bladeRF-cli -p
  7. You can view additional information about the device via bladeRF-cli -e info -e version.
  8. If any warnings indicate that a firmware update is needed, run:bladeRF-cli -f <firmware_file>.
  • If you ever find the device booting into the FX3 bootloader (e.g., if you unplug the device in the middle of a firmware upgrade), see the recovery command in bladeRF-cli for additional details.
  1. See the overview of the bladeRF-cli for more information about loading the FPGA and using the command line interface tool

For more information, see the bladeRF wiki.

Build Variables

Below are global options to choose which parts of the bladeRF project should be built from the top level. Please see the fx3_firmware and host subdirectories for more specific options.

Option Description
-DENABLE_FX3_BUILD=<ON/OFF> Enables building the FX3 firmware. Default: OFF
-DENABLE_HOST_BUILD=<ON/OFF> Enables building the host library and utilities overall. Default: ON