bladeRF USB 3.0 Superspeed Software Defined Radio Source Code http://nuand.com
  • C 45.8%
  • VHDL 21%
  • Verilog 15.8%
  • Tcl 3.8%
  • MATLAB 3.2%
  • Other 10.3%
Find a file
2013-08-25 14:32:25 -04:00
firmware_common host: Reorganized some common host code 2013-08-22 20:44:16 -04:00
fx3_firmware Merge branch 'dev-libusb_support' into bladerf 2013-08-25 13:53:13 -04:00
hdl Merge pull request #36 from rtucker/readme_updates 2013-07-28 11:28:13 -07:00
host Merge branch 'dev-libusb_support' into bladerf 2013-08-25 13:53:13 -04:00
.gitignore libbladeRF: Updated header file and documentation for async changes 2013-08-22 22:28:06 -04:00
COPYING FSK bridge example 2013-02-18 20:11:39 -08:00
README.md Github edit: Fixed and updated 'Getting started' text and links 2013-08-25 14:32:25 -04:00

bladeRF Source

This repository contains all the source code required to program and interact with a bladeRF platform, including firmware for the Cypress FX3 USB controller, HDL for the Altera Cyclone IV FPGA, and C code for the host side libraries, drivers, and utilities. The source is organized as follows:

Directory Description
firmware_common Source and header files common between firmware and host software
fx3_firmware Firmware for the Cypress FX3 USB controller
hdl All HDL code associated with the Cyclone IV FPGA
host Host-side libraries, drivers, utilities and samples

Quick Start

  1. Clone this repository via: git clone https://github.com/Nuand/bladeRF.git
  2. Fetch the latest pre-built bladeRF FPGA image. See the README.md in the hdl directory for more information.
  3. Fetch the latest pre-built bladeRF firmware image. See the README.md in the fx3_firmware directory for more information.
  4. Follow the instructions in the host directory to build and install libbladeRF and the bladeRF-cli utility.
  5. Attach the bladeRF board to your fastest USB port. After flashing firmware, be sure to press the reset button or unplug/replug the device.
  6. If you haven't upgraded your firmware, run bladeRF-cli -f <path_to_prebuilt_firmware>. This upgrade is required to utilize libusb support.
  7. You should now be able to see your device in the list output via bladeRF-cli -p
  8. See the overview of the bladeRF-cli for more information about loading the FPGA and using the command line interface tool

Coming Soon: Quick Start information for GNU Radio support via gr-osmosdr

In the meantime, see the Building GNURADIO from GIT section of [kb3gtn's bladeRF setup guide] for information on this.