bladeRF/debian/changelog
2017-07-25 15:51:18 -04:00

162 lines
7.4 KiB
Text

bladerf (2017.07) unstable; urgency=low
[ Robert Ghilduta ]
* Add Automatic Gain Control
[ Rey Tucker ]
* debian: fix permissions on FPGA and firmware binaries after downloading
-- Robert Ghilduta <robert.ghilduta@nuand.com> Sun, 02 Jul 2017 21:14:15 -0400
bladerf (2016.06) unstable; urgency=low
* Added synchronization trigger functionality
* Added SMB clock port control to libbladeRF API
* Added XB-300 support
* Added detection of v2.0.0 firmware series (with new VID/PID)
* FPGA bitstream v0.6.0, FX3 FW v2.0.0, libbladeRF v1.7.2, bladeRF-cli v1.4.0
-- Jon Szymaniak <jon.szymaniak@nuand.com> Wed, 29 Jun 2016 16:10:35 -0400
bladerf (2016.01-rc1) unstable; urgency=low
* Added support for VCTCXO taming using 1.8V 1 PPS or 10 MHz input signal
* Revised DC offset correction algorithm; fixes lockups
* Added firmware logging mechanism
* Updated firmware to FX3 SDK 1.3.3
* Added libbladeRF support for setting SMB clock to arbitrary frequency
* Added XB-100 host support
* Fixed TX undderrun issues (now correctly uses all available buffers)
* FPGA bitstream v0.5.0, FX3 FW v1.9.0, libbladeRF v1.5.1, bladeRF-cli v1.3.1
-- Jon Szymaniak <jon.szymaniak@nuand.com> Thu, 07 Jan 2016 16:35:09 -0500
bladerf (2015.07) unstable; urgency=low
* FPGA: Fixed bug where TX_NOW bursts could cause metadata/sample FIFO slips
* libbladeRF: Devices can now be opened using only a subset of a serial number
* libbladeRF: Fixed regressions in XB-200 filterbank selection and loopback support
* libbladeRF: Corrected zero-padding at end of TX burst
* FPGA bitstream v0.3.4, FX3 Firmware v1.8.0, libbladeRF v1.4.3, bladeRF-cli v1.2.1
-- Jon Szymaniak <jon.szymaniak@gmail.com> Sat, 25 Jul 2015 16:35:38 -0400
bladerf (2015.06-rc1) unstable; urgency=low
[ Jon Szymaniak ]
* FPGA, libbladeRF: Configurable tuning modes: host and fpga
* FPGA, libbladeRF: Scheduled retune: retune module at specified sample timestamp
* FPGA, libbladeRF: Quick retune: retune using previously identified tuning parameters
* FPGA, libbladeRF: Readback of current vctcxo trim DAC settting
* bladeRF-cli: Added semicolon command separator support
* bladeRF-cli: Added 'print trimdac' implementation
[ Ryan Tucker ]
* Fixup debian/changelog for rc1
-- Ryan Tucker <rtucker@gmail.com> Wed, 01 Jul 2015 20:07:04 -0400
bladerf (2015.02) unstable; urgency=low
* Build fixes
-- Jon Szymaniak <jon.szymaniak@gmail.com> Sat, 28 Feb 2015 15:58:39 -0500
bladerf (2015.01-rc2) unstable; urgency=low
* Fixed issue #95, which prevented device from being opened after an application crash
* Fixes for undesired XB-200 signal attenuation and LMS signal integrity issues
* Added BLADERF_LOG_LEVEL support and optional libbladeRF syslog support
* FPGA bitstream v0.1.2, FX3 Firmware v1.8.0, libbladeRF v1.2.0, bladeRF-cli v1.1.1
-- Jon Szymaniak <jon.szymaniak@gmail.com> Sat, 31 Jan 2015 17:02:35 -0500
bladerf (2014.12-rc1) unstable; urgency=low
* Added libbladeRF API functions for finding and recovering devices in bootloader mode
* Added BLADERF_SEARCH_DIR, current working directory, and binary dir to libbladeRF file search path
* The bladeRF-cli -p/--probe option now returns a non-zero return code if no devices were found.
* FPGA bitstream v0.1.2, FX3 Firmware v1.8.0, libbladeRF v1.1.0, bladeRF-cli v1.1.0
-- Jon Szymaniak <jon.szymaniak@gmail.com> Tue, 22 Dec 2014 14:06:49 -0500
bladerf (2014.11) unstable; urgency=low
* First stable libbladeRF API release
* FPGA bitstream v0.1.2, FX3 Firmware v1.8.0, libbladeRF v1.0.0, bladeRF-cli v1.0.0
-- Jon Szymaniak <jon.szymaniak@gmail.com> Sun, 30 Nov 2014 16:18:33 -0500
bladerf (2014.11-rc3) unstable; urgency=low
* Second of three release candidates for rescheduled 2014.11 release
* FPGA bitstream v0.1.1, FX3 Firmware v1.7.1, libbladeRF v0.17.0, bladeRF-cli v0.12.0
* Introduced timestamp metadata support in libbladeRF's synchronous interface
* A majority of libbladeRF functions have been made thread-safe.
* Fixes for DC calibration issues, deadlocks, crashes, and various defects.
-- Jon Szymaniak <jon.szymaniak@gmail.com> Thu, 30 Oct 2014 21:59:38 -0400
bladerf (2014.09-rc2) unstable; urgency=low
* Tagged release 2014.09-rc2 at dddc72f
* Second of three release candidates for 2014.09 release
* FPGA bitstream v0.0.6, FX3 Firmware v1.7.1, libbladeRF v0.16.2, bladeRF-cli v0.11.1
* Closes #284: [hdl (nios)] Defects present in gain/phase correction bug
* Closes #271: Frequency readback is incorrect when using xb200 bug
* Closes #270: Markdown-ify the bladeRF-cli interactive help
* Closes #254: bladeRF-cli: Clean up print/set lnagain bug
* Closes #249: [libbladeRF] LMS VTUNE not locking occasionally bug
* Closes #248: [bladeRF-Cli] Fix 'correct' command parameter ranges, cleanup usage and help text bug
* Closes #243: [libbladeRF] Remove bladerf_* calls from lms.c enhancement
* Closes #234: [libbladeRF] Cleanup: Move bladerf_get/set_sampling to lms.c enhancement
* Closes #220: libbladeRF: LMS SELOUT[1:0] may be left in an invalid state upon exiting loopback mode bug
* Closes #210: [CLI] After a calibrate command is issued, the bladeRF transmits a carrier. bug
-- Ryan Tucker <rtucker@gmail.com> Thu, 24 Jul 2014 22:59:24 -0400
bladerf (2014.09-rc1) unstable; urgency=low
* Tagged release 2014.09-rc1 at 9c651b5
* First of two release candidates for 2014.09 release
* FPGA bitstream v0.0.5, FX3 Firmware v1.7.0, libbladeRF v0.16.0, bladeRF-cli v0.11.0
* Closes #268: [libbladeRF] Version check routines have flipped logic bug
* Closes #257: [libbladeRF] Remove incorrect error_conv() call(s).
* Closes #256: [libbladeRF] Intermittent FPGA load failures bug
* Closes #246: [libbladerRF] Added an error code for "File not found" errors enhancement
* Closes #245: [libbladeRF] bladerf_set_bandwidth() does not appropriately handle actual=NULL bug
* Closes #244: [libbladeRF] Lock-up occurs if sync TX is configured but not used
* Closes #241: TX Stream can lose initial buffers
* Closes #237: [libbladeRF] XB-200 support and API calls required bug
* Closes #235: [libbladeRF] Change API return values for flash calls - return 0, not >= 0. bug
* Closes #228: [libbladeRF] Additional libusb function checks required bug
* Closes #223: FPGA DC remover block enhancement
* Closes #217: Probe returns Backend Id's, bladerf_open wants a string for the backend. bug
* Closes #211: [bladeRF-cli] Text wraps around in man pages bug
* Closes #189: [libbladeRF] Refactor backend interface and libusb backend implementation enhancement
* Closes #176: [libbladeRF] Mixup between SPI flash "sector" and "erase block" enhancement
* Closes #55: CLI: A number of commands are still unimplemented stubs bug
* Closes #46: CLI: Add -e <cmd> support enhancement
-- Ryan Tucker <rtucker@gmail.com> Sat, 05 Jul 2014 14:56:29 -0400
bladerf (0~20131229-1) unstable; urgency=low
* Rename libbladerf0-dev -> libbladerf-dev
-- Ryan Tucker <rtucker@gmail.com> Sun, 29 Dec 2013 16:04:17 -0500
bladerf (0~20131006-1) unstable; urgency=low
* Another experimental release
* Make it work
* Rebase to b80d31f5 (Merge pull request #140)
* Generate man pages from markdown'd doxygen
-- Ryan Tucker <rtucker@gmail.com> Sun, 06 Oct 2013 19:38:31 -0400
bladerf (0~20130929-1) unstable; urgency=low
* Initial Debian packaging (Closes: #121)
-- Ryan Tucker <rtucker@gmail.com> Sun, 29 Sep 2013 17:41:30 +0000