bladeRF/host
Jon Szymaniak 2cfb00173e cmake: Fixes for version check helper programs (Cygwin)
It appears that although CMake no longer defines WIN32 for Cygwin,
the libusb headers may be defining this macro, causing the code intended for
MSVC builds to be used in libusb_version.c and fail to compile. Hence,
we need to explicitly check for __CYGWIN__ in this program. Thank you to
Jeremy Quirke for pointing out this issue and providing fixes.

The libc version check doesn't make sense for Cygwin builds, so it is now
skipped.
2014-10-30 17:18:28 -04:00
..
cmake cmake: Fixes for version check helper programs (Cygwin) 2014-10-30 17:18:28 -04:00
common host: Cygwin build fixes 2014-10-29 13:09:27 -04:00
drivers libbladeRF: Added support for Cypress Windows Driver & API backend 2014-10-12 21:55:26 -04:00
libraries libbladeRF: Load LMS DC cal registers from table(s) and related cleanup 2014-10-30 14:24:02 -04:00
misc host/misc: Added a Windows build script 2014-07-22 02:10:04 -04:00
utilities bladeRF-cli: Use points at edges of calibration range for TX DC cal 2014-10-29 18:49:34 -04:00
CMakeLists.txt cmake: Fixes for version check helper programs (Cygwin) 2014-10-30 17:18:28 -04:00
README.md host: Updated README.md 2014-10-13 15:09:53 -04:00

bladeRF Host Source

This directory contains the items outlined in the following table. Note that this structure includes some items planned for future development.

Directory Description
cmake CMake scripts and modules
drivers Device drivers for supported operating systems
libraries The main bladeRF support library and supplemental libraries
misc Miscellaneous files
utilities Applications and tools

Dependencies

libusb

libusb and its development headers are required. >= v1.0.16 is recommended for Linux, and >= v1.0.19 is recommended for Windows.

Ideally, the latest released version is always recommended. Please see the libusb ChangeLog for more information.

(Optional) FX3 SDK

Windows users that wish to use a Cypress driver/library based libbladeRF backend will need to download and install the Cypress FX3 SDK.

CMake

CMake is used to build the items in this directory. >= v2.8.5 is required, but the latest available version is recommended.

Build

Linux and OSX

From this directory, create a build directory. This is personal preference, of course. It allows for all build files to be cleaned up via a single rm -r build/ command.

Next, run cmake to configure the build, followed by make and sudo make install to build and install libraries and applications.

mkdir -p build
cd build
cmake [options] ../
make
sudo make install
sudo ldconfig

Windows

  • Create a build directory
  • Run the CMake GUI, pointing the source location to this host directory and the build directory to the build directory you just created.
  • Click the CMake GUI's "Configure" button. Select the Visual Studio version installed on your system when prompted for a "generator."
    • If you run into any failures, ensure items such as LIBUSB_PATH are defined correctly, and re-run after updating them.
  • Adjust options as desired and re-run the "Configure" command as needed.
  • Click the CMake GUI's "Generate" button.
  • In the build directory, a Visual Studio solution will now exist.
  • Upon building the solution, build artifacts will be present in: build\output\<build type>
    • <build_type> may refer to Debug or Release, for example

CMake Options and Flags

Below is a list of useful and project-specific CMake options. Please see the CMake documentation for more information.

Option Description
-DCMAKE_INSTALL_PREFIX=</prefix/path> Override system-specific path to install output files. Default depends on system; see cmake -L
-DCMAKE_BUILD_TYPE=<type> Set to "Debug" to enable a debug build. Default: "Release"
-DBUILD_DOCUMENTATION=<ON/OFF> Build libbladeRF API documentation and manpages for utilities. Default: OFF
-DCMAKE_C_COMPILER=<compiler> Specify the compiler to use. Otherwise, CMake will determine a default.
-DENABLE_GDB_EXTENSIONS=<ON/OFF> GCC & GDB users may want to set this to use -ggdb3 instead of -g. Default: OFF
-DENABLE_BACKEND_LIBUSB=<ON/OFF> Enables libusb backend in libbladeRF. Default: ON if libusb is available, OFF otherwise.
-DENABLE_BACKEND_CYAPI=<ON/OFF>a Enables (Windows-only) Cypress driver/library based backend in libbladeRF. Default: ON if the FX3 SDK is available, OFF otherwise.
-DENABLE_BACKEND_DUMMY=<ON/OFF> Enables dummy backend support in libbladeRF. Only useful for some developers. Default: OFF
-DENABLE_LIBTECLA=<ON/OFF> Enable libtecla support in the bladeRF-cli program. Default: ON if libtecla is detected, OFF otherwise.
-DINSTALL_UDEV_RULES=<ON/OFF> Install udev rules to /etc/udev/rules.d/. Default: ON for Linux, OFF default otherwise.
-DUDEV_RULES_PATH=</path/to/udev/rules> Override the path for installing udev rules. Default: /etc/udev/rules.d
-DBLADERF_GROUP=<group> Sets the group associated with the bladeRF in the installed udev rules. Default: plugdev
-DTREAT_WARNINGS_AS_ERRORS=<ON/OFF> Treat compiler warnings as errors. Contributors should keep this enabled. Default: ON
-DENABLE_LOG_FILE_INFO=<ON/OFF> Enable source file and line number information in log messages. Default: ON