Add functions to bypass and disable the LPF and check whether it is currently bypassed or disabled. |
||
|---|---|---|
| .. | ||
| cmake | ||
| common | ||
| drivers/linux | ||
| libraries | ||
| misc | ||
| utilities | ||
| CMakeLists.txt | ||
| README.md | ||
bladeRF Host Source
This directory contains the items outlined in the following table. Note that this structure includes some items planned for future development.
| Directory | Description |
|---|---|
| cmake | CMake scripts and modules |
| drivers | Device drivers for supported operating systems |
| libraries | The main bladeRF support library and supplemental libraries |
| misc | Miscellaneous files |
| utilities | Applications and tools |
Dependencies
libUSB
libusb-1.0 and its development headers are required. >= v1.0.12 is recommended for Linux, and >= v1.0.13 is recommended for Windows. Ideally, the latest released version is always recommended. Please see the libusb ChangeLog for more information.
CMake
CMake is used to build the items in this directory.
Ubuntu/Debian:
sudo apt-get install libusb-1.0.0 libusb-1.0.0-dev cmake
Build
From this directory, create a 'build' directory. This is personal preference, of course. It allows for all build files to be cleaned up via a single rm -r build/ command.
Next, run cmake to configure the build, followed by make and sudo make install to build and install libraries and applications.
mkdir -p build
cd build
cmake [options] ../
make
sudo make install
Below is a list of useful and project-specific CMake options. Please see the CMake variable list in CMake's documentation for more information.
| Option | Description |
|---|---|
| -DCMAKE_BUILD_TYPE=<type> | Set to "Debug" to enable a debug build. "Release" is the default. |
| -DCMAKE_C_COMPILER=<compiler> | Specify the compiler to use. Otherwise, CMake will determine a default. |
| -DENABLE_GDB_EXTENSIONS=<ON/OFF> | GCC & GDB users may want to set this to use -ggdb3 instead of -g. Disabled by default. |
| -DENABLE_BACKEND_LIBUSB=<ON/OFF> | Enables libusb backend in libbladeRF. Enabled by default. |
| -DENABLE_BACKEND_LINUX_DRIVER=<ON/OFF> | Enables Linux driver in libbladeRF. Disabled by default. |
| -DENABLE_LIBTECLA=<ON/OFF> | Enable libtecla support in the bladeRF-cli program. Default: ON if libtecla is detected, OFF otherwise. |
| -DINSTALL_UDEV_RULES=<ON/OFF> | Install udev rules to /etc/udev/rules.d/. Default: ON for Linux, OFF default otherwise. |