bladeRF USB 3.0 Superspeed Software Defined Radio Source Code http://nuand.com
  • C 45.8%
  • VHDL 21%
  • Verilog 15.8%
  • Tcl 3.8%
  • MATLAB 3.2%
  • Other 10.3%
Find a file
Sylvain Munaut 3ca91833f9 lib: Fix RXVGA1 set/get to convert from dB to raw value
The formula used is a very crude quadratic approximation from the
3 data points given in the programming manual ... for something more
precise, we'd need a LUT. But it may vary with temp and device anyway.

Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
2013-07-20 19:28:18 +02:00
common linux_driver: add ioctl()s for reading and writing OTP and NAND 2013-07-06 14:14:21 -07:00
fx3_firmware doc: Touched up top-level README, added Eclipse info to FX3 README 2013-07-17 00:00:43 -04:00
hdl hdl: Touched up hdl README.md to provide a few more details 2013-07-18 23:59:53 -04:00
linux lib: Fix RXVGA1 set/get to convert from dB to raw value 2013-07-20 19:28:18 +02:00
.gitignore cli: peek/poke an print/set combined into single files. 2013-07-06 04:50:38 -07:00
COPYING FSK bridge example 2013-02-18 20:11:39 -08:00
README.md doc: Touched up top-level README, added Eclipse info to FX3 README 2013-07-17 00:00:43 -04:00

bladeRF Source

This repository contains all the source code required to program and interact with a bladeRF platform, including firmware for the Cypress FX3 USB controller, HDL for the Altera Cyclone IV FPGA, and C code for the host side driver, library, and command line interface.

The source is organized as follows:

Directory Description
common Source and header files common across the platform
fx3_firmware Firmware for the Cypress FX3 USB controller
hdl All HDL code associated with the Cyclone IV FPGA
linux The linux kernel driver, library and command-line interface for interacting with a bladeRF device

Building Procedure

Each subsection of the source code can be built by itself and maintains their own README files for building. The recommended build flow is as such: