bladeRF USB 3.0 Superspeed Software Defined Radio Source Code
http://nuand.com
- C 45.8%
- VHDL 21%
- Verilog 15.8%
- Tcl 3.8%
- MATLAB 3.2%
- Other 10.3%
* devinfo: fix strncpy error
Fix two build errors on Arch:
/root/bladeRF/host/libraries/libbladeRF/src/devinfo.c:308:5:
error: ‘strncpy’ destination unchanged after copying no bytes
[-Werror=stringop-truncation]
/root/bladeRF/host/libraries/libbladeRF/src/devinfo.c:308:5:
error: ‘strncpy’ output truncated before terminating nul copying as many
bytes from a string as its length [-Werror=stringop-truncation]
* bladerf2/params: fix implicit conversion error
/root/bladeRF/host/libraries/libbladeRF/src/board/bladerf2/params.c:437:7:
error: implicit conversion from 'int' to 'int16_t' (aka 'short') changes
value from 32768 to -32768 [-Werror,-Wconstant-conversion]
32768, 0, 0, 0, 0, 0, 0, 0,
^~~~~
* Doxyfile: fix CLANG_ASSISTED_PARSING warning
fixes:
warning: Tag `CLANG_ASSISTED_PARSING' at line 1033 of file
`/root/bladeRF/build/host/libraries/libbladeRF/doc/doxygen/Doxyfile'
belongs to an option that was not enabled at compile time.
To avoid this warning please remove this line from your
configuration file or upgrade it using "doxygen -u", or recompile
doxygen with this feature enabled.
warning: Tag `CLANG_OPTIONS' at line 1041 of file
`/root/bladeRF/build/host/libraries/libbladeRF/doc/doxygen/Doxyfile'
belongs to an option that was not enabled at compile time.
To avoid this warning please remove this line from your
configuration file or upgrade it using "doxygen -u", or recompile
doxygen with this feature enabled.
* libbladeRF: fix doxygen build error
fixes:
/home/rtucker/dev/privatebladeRF/host/libraries/libbladeRF/include/libbladeRF.h:2284:
warning: unable to resolve link to `sync_tx_meta.html' for \link command
* bladeRF-fsk: fix clangscan warning
/root/bladeRF/host/utilities/bladeRF-fsk/c/src/correlator.c:261:59:
warning: The left operand of '/' is a garbage value
corr->ins1->real = corr->ins2->real = samples[i].i/2048.0f;
~~~~~~~~~~~~^
1 warning generated.
* fpga_common/lms.c: fix clangscan warning
/root/bladeRF/fpga_common/src/lms.c:2329:14: warning: 3rd function call
argument is an uninitialized value
status = write_vcocap(dev, base, f->vcocap, vcocap_reg_state);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1 warning generated.
* test_repeated_stream: fix clangscan warning
/root/bladeRF/host/libraries/libbladeRF_test/test_repeated_stream/src/main.c:284:9:
warning: 1st function call argument is an uninitialized value
pthread_join(rx_thread, NULL);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1 warning generated.
* test_interleaver: fix clangscan warning
/root/bladeRF/host/libraries/libbladeRF_test/test_interleaver/src/main.c:119:17:
warning: 4th function call argument is an uninitialized value
snprintf((rowstr + rowidx), rowsize - rowidx, "%02x",
*u8buf++);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1 warning generated.
* test_tx_gmsk_bursts: fix clangscan warning
/root/bladeRF/host/libraries/libbladeRF_test/test_timestamps/src/test_tx_gmsk_bursts.c:69:5:
warning: 2nd function call argument is an uninitialized value
printf(" Frequency: %u\n", s->frequency);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1 warning generated.
* ad9361_api.c: fix clangscan warning
/root/bladeRF/host/libraries/libbladeRF/src/driver/thirdparty/adi/ad9361_api.c:445:3: warning: Value stored to 'ret' is never read
ret = -ENODEV;
^ ~~~~~~~
1 warning generated.
* correlator: another attempt to fix clangscan warning
* Revert "fpga_common/lms.c: fix clangscan warning"
This reverts commit 8cbb5f03f0d0927befa5053e9564df06d13ede72.
* test_interleaver: fixup clang-scan warning
some sloppy init, some messy iteration, the usual :)
/root/bladeRF/host/libraries/libbladeRF_test/test_interleaver/src/main.c:124:17:
warning: 4th function call argument is an uninitialized value
* Revert "ad9361_api.c: fix clangscan warning"
This reverts commit 14a7f8f53f84aeff721a752259ca9596a13e3a2a.
* bladeRF-fsk: fixup clang-scan warning fix
|
||
|---|---|---|
| debian | ||
| doc | ||
| firmware_common | ||
| fpga_common | ||
| fx3_firmware | ||
| hdl | ||
| host | ||
| legal | ||
| .clang-format | ||
| .gitignore | ||
| CHANGELOG | ||
| CMakeLists.txt | ||
| CONTRIBUTORS | ||
| COPYING | ||
| README.md | ||
bladeRF Source
This repository contains all the source code required to program and interact with a bladeRF platform, including firmware for the Cypress FX3 USB controller, HDL for the Altera Cyclone IV FPGA, and C code for the host side libraries, drivers, and utilities. The source is organized as follows:
| Directory | Description |
|---|---|
| firmware_common | Source and header files common between firmware and host software |
| fx3_firmware | Firmware for the Cypress FX3 USB controller |
| hdl | All HDL code associated with the Cyclone IV FPGA |
| host | Host-side libraries, drivers, utilities and samples |
Quick Start
- Clone this repository via:
git clone https://github.com/Nuand/bladeRF.git - Fetch the latest pre-built bladeRF FPGA image. See the README.md in the hdl directory for more information.
- Fetch the latest pre-built bladeRF firmware image. See the README.md in the fx3_firmware directory for more information.
- Follow the instructions in the host directory to build and install libbladeRF and the bladeRF-cli utility.
- Attach the bladeRF board to your fastest USB port.
- You should now be able to see your device in the list output via
bladeRF-cli -p - You can view additional information about the device via
bladeRF-cli -e info -e version. - If any warnings indicate that a firmware update is needed, run:
bladeRF-cli -f <firmware_file>.
- If you ever find the device booting into the FX3 bootloader (e.g., if you unplug the device in the middle of a firmware upgrade), see the
recoverycommand in bladeRF-cli for additional details.
- See the overview of the bladeRF-cli for more information about loading the FPGA and using the command line interface tool
For more information, see the bladeRF wiki.
Build Variables
Below are global options to choose which parts of the bladeRF project should be built from the top level. Please see the fx3_firmware and host subdirectories for more specific options.
| Option | Description |
|---|---|
| -DENABLE_FX3_BUILD=<ON/OFF> | Enables building the FX3 firmware. Default: OFF |
| -DENABLE_HOST_BUILD=<ON/OFF> | Enables building the host library and utilities overall. Default: ON |