bladeRF USB 3.0 Superspeed Software Defined Radio Source Code http://nuand.com
  • C 45.8%
  • VHDL 21%
  • Verilog 15.8%
  • Tcl 3.8%
  • MATLAB 3.2%
  • Other 10.3%
Find a file
Jon Szymaniak 51170a05e5 libbladeRF: Added readback of FW loopback, disable it for LMS loopback
Added the ability to read back the state of FW loopback from devices
running FW v1.7.1. While it is possible to enable FW loopback mode in
v1.7.0 firmware, libbladeRF will now enforce the v1.7.1 requirement so
it can correctly read back and report the FW mode.

bladerf_set_loopback() has also been updated to ensure that the
FW loopback is disabled when switching to an LMS loopback mode.
2014-07-19 16:31:46 -04:00
debian Merge pull request #276 from rtucker/dev-issue166 2014-07-08 22:13:23 -04:00
firmware_common fx3_firmware: Added support for reading back FW loopback state 2014-07-19 13:31:13 -04:00
fx3_firmware fx3_firmware: Bumped patch revision (v1.7.1) 2014-07-19 13:31:53 -04:00
hdl hdl: Change polarity of the LMS SPI. 2014-07-10 22:10:22 -04:00
host libbladeRF: Added readback of FW loopback, disable it for LMS loopback 2014-07-19 16:31:46 -04:00
legal license: License changes on various portions of the codebase 2013-10-27 00:17:35 -04:00
.gitignore Nuke and ignore a neglected tilde file 2013-10-19 22:12:38 -04:00
CHANGELOG Added top-level CHANGELOG containing summary of 2014.09-rc1 2014-07-05 14:44:40 -04:00
CMakeLists.txt cmake: FX3 firmware build is disabled by default 2013-12-21 17:36:06 -05:00
CONTRIBUTORS Updated CONTRIBUTORS 2013-09-27 21:21:12 -04:00
COPYING COPYING: Typo fix 2014-02-14 22:54:52 -05:00
README.md README: Added link to wiki and removed data getting started lnk 2013-10-19 18:51:53 -04:00

bladeRF Source

This repository contains all the source code required to program and interact with a bladeRF platform, including firmware for the Cypress FX3 USB controller, HDL for the Altera Cyclone IV FPGA, and C code for the host side libraries, drivers, and utilities. The source is organized as follows:

Directory Description
firmware_common Source and header files common between firmware and host software
fx3_firmware Firmware for the Cypress FX3 USB controller
hdl All HDL code associated with the Cyclone IV FPGA
host Host-side libraries, drivers, utilities and samples

Quick Start

  1. Clone this repository via: git clone https://github.com/Nuand/bladeRF.git
  2. Fetch the latest pre-built bladeRF FPGA image. See the README.md in the hdl directory for more information.
  3. Fetch the latest pre-built bladeRF firmware image. See the README.md in the fx3_firmware directory for more information.
  4. Follow the instructions in the host directory to build and install libbladeRF and the bladeRF-cli utility.
  5. Attach the bladeRF board to your fastest USB port. After flashing firmware, be sure to press the reset button or unplug/replug the device.
  6. If you haven't upgraded your firmware, run bladeRF-flash -f <path_to_prebuilt_firmware>. This upgrade is required to utilize libusb support. Be sure to reset or power-cycle the board after flashing the firmware.
  • If your board is stuck in the FX3 bootloader or is at factory firmware or v1.2, see bladeRF-flash for additional details.
  1. You should now be able to see your device in the list output via bladeRF-cli -p
  2. See the overview of the bladeRF-cli for more information about loading the FPGA and using the command line interface tool

For more information, see the bladeRF wiki