bladeRF USB 3.0 Superspeed Software Defined Radio Source Code http://nuand.com
  • C 45.8%
  • VHDL 21%
  • Verilog 15.8%
  • Tcl 3.8%
  • MATLAB 3.2%
  • Other 10.3%
Find a file
Rey Tucker 52f6c08063 host: libbladeRF_bindings: matlab: update libbladeRF_proto.m (#547)
* libbladeRF/matlab: change win64 bool type (#543)

This should fix an error in recent Thunk builds.  I am not sure what the
side effects of this will be (esp. with older Matlab versions) but this
seems to work now.

* host: libbladeRF_bindings: re-sort libbladeRF_proto.m to match recent MATLAB output

* host: matlab: update for libbladeRF 1.9.0

Add a few missing functions:

 bladerf_set_gain_mode
 bladerf_get_gain_mode
 bladerf_set_smb_mode
 bladerf_get_smb_mode
 bladerf_trigger_init
 bladerf_trigger_arm
 bladerf_trigger_fire
 bladerf_trigger_state
 bladerf_set_vctcxo_tamer_mode
 bladerf_get_vctcxo_tamer_mode
 bladerf_xb300_set_trx
 bladerf_xb300_get_trx
 bladerf_xb300_set_amplifier_enable
 bladerf_xb300_get_amplifier_enable
 bladerf_xb300_get_output_power
 bladerf_get_fw_log
 bladerf_init_stream
 bladerf_stream
 bladerf_submit_stream_buffer
 bladerf_submit_stream_buffer_nb
 bladerf_deinit_stream
 bladerf_read_trigger
 bladerf_write_trigger

Add a few missing structs and enums, related to above

Also remove the bool_ret/bool_arg vars, as they aren't really needed any
more.

* host: matlab: fixup uint64s, cleanup

Removed the 'pathsep' from the architecture case, since it's seemingly
set by matlab itself

Not pre-allocating ival, to avoid having to count that high

* host: matlab: comment out stream-related protos

Matlab doesn't support FcnPtrs (bladerf_stream_cb) or voidPtrPtrPtr
(void***), so bladerf_init_stream is not usable.  If bladerf_init_stream
isn't usable, then anything involving struct bladerf_stream isn't
usable.
2018-03-30 14:05:00 -04:00
debian Update copyright date ranges to include 2017 2017-12-21 12:55:05 -05:00
doc doc: Update outdated/missing release documentation 2018-03-26 16:30:17 -04:00
firmware_common firmware_common: add bladerf2 usb pid 2017-12-21 12:54:55 -05:00
fpga_common fpga_common: fix overrun in 16x64 NIOS II packet packing 2017-12-21 12:54:57 -05:00
fx3_firmware fx3_firmware v2.1.0: add bladeRF 2.0 support 2017-12-21 12:55:05 -05:00
hdl hdl: update changelog, set version 0.7.2 2018-03-26 15:22:56 -04:00
host host: libbladeRF_bindings: matlab: update libbladeRF_proto.m (#547) 2018-03-30 14:05:00 -04:00
legal Update copyright date ranges to include 2017 2017-12-21 12:55:05 -05:00
.clang-format clang-format: minor tweak for brackets on lists 2017-12-21 12:55:09 -05:00
.gitignore gitignore: Cleanup 2017-12-21 16:17:54 -05:00
CHANGELOG bladeRF 2018.03-alpha1 2018-03-26 16:30:42 -04:00
CMakeLists.txt fx3_firmware: Use CMake for project configuration and Makefile generation 2016-04-06 16:06:06 -04:00
CONTRIBUTORS CONTRIBUTORS: self-updating 2017-08-02 18:06:21 -04:00
COPYING COPYING: Touched up the text and specifically referenced items 2014-10-31 10:50:31 -04:00
README.md Update CMake options in READMEs (#285) 2014-07-27 13:32:49 -04:00

bladeRF Source

This repository contains all the source code required to program and interact with a bladeRF platform, including firmware for the Cypress FX3 USB controller, HDL for the Altera Cyclone IV FPGA, and C code for the host side libraries, drivers, and utilities. The source is organized as follows:

Directory Description
firmware_common Source and header files common between firmware and host software
fx3_firmware Firmware for the Cypress FX3 USB controller
hdl All HDL code associated with the Cyclone IV FPGA
host Host-side libraries, drivers, utilities and samples

Quick Start

  1. Clone this repository via: git clone https://github.com/Nuand/bladeRF.git
  2. Fetch the latest pre-built bladeRF FPGA image. See the README.md in the hdl directory for more information.
  3. Fetch the latest pre-built bladeRF firmware image. See the README.md in the fx3_firmware directory for more information.
  4. Follow the instructions in the host directory to build and install libbladeRF and the bladeRF-cli utility.
  5. Attach the bladeRF board to your fastest USB port.
  6. You should now be able to see your device in the list output via bladeRF-cli -p
  7. You can view additional information about the device via bladeRF-cli -e info -e version.
  8. If any warnings indicate that a firmware update is needed, run:bladeRF-cli -f <firmware_file>.
  • If you ever find the device booting into the FX3 bootloader (e.g., if you unplug the device in the middle of a firmware upgrade), see the recovery command in bladeRF-cli for additional details.
  1. See the overview of the bladeRF-cli for more information about loading the FPGA and using the command line interface tool

For more information, see the bladeRF wiki.

Build Variables

Below are global options to choose which parts of the bladeRF project should be built from the top level. Please see the fx3_firmware and host subdirectories for more specific options.

Option Description
-DENABLE_FX3_BUILD=<ON/OFF> Enables building the FX3 firmware. Default: OFF
-DENABLE_HOST_BUILD=<ON/OFF> Enables building the host library and utilities overall. Default: ON