bladeRF USB 3.0 Superspeed Software Defined Radio Source Code http://nuand.com
  • C 45.8%
  • VHDL 21%
  • Verilog 15.8%
  • Tcl 3.8%
  • MATLAB 3.2%
  • Other 10.3%
Find a file
Robert Ghilduta 6f04429824 hdl: add XB-200 support
This commit introduce XB-200 support in HDL. XB support introduces a new
direction configurable GPIO bank that is used to control peripherals on the XB
port. The xb_mode for the XB-200 board overrides exp_goio so it is used as
a chipselect pin for the ADF4351.
2014-06-17 09:48:00 -07:00
debian bladeRF-cli: Removed python references and build dependencies 2014-05-12 22:01:53 -04:00
firmware_common fx3_firmware: add the firmware based loopback support 2014-04-04 05:29:37 -07:00
fx3_firmware fx3: Bumped version to 1.7.0 2014-05-17 23:40:32 -04:00
hdl hdl: add XB-200 support 2014-06-17 09:48:00 -07:00
host bladeRF-cli: add initial support for XB-200 2014-06-17 09:47:59 -07:00
legal license: License changes on various portions of the codebase 2013-10-27 00:17:35 -04:00
.gitignore Nuke and ignore a neglected tilde file 2013-10-19 22:12:38 -04:00
CMakeLists.txt cmake: FX3 firmware build is disabled by default 2013-12-21 17:36:06 -05:00
CONTRIBUTORS Updated CONTRIBUTORS 2013-09-27 21:21:12 -04:00
COPYING COPYING: Typo fix 2014-02-14 22:54:52 -05:00
README.md README: Added link to wiki and removed data getting started lnk 2013-10-19 18:51:53 -04:00

bladeRF Source

This repository contains all the source code required to program and interact with a bladeRF platform, including firmware for the Cypress FX3 USB controller, HDL for the Altera Cyclone IV FPGA, and C code for the host side libraries, drivers, and utilities. The source is organized as follows:

Directory Description
firmware_common Source and header files common between firmware and host software
fx3_firmware Firmware for the Cypress FX3 USB controller
hdl All HDL code associated with the Cyclone IV FPGA
host Host-side libraries, drivers, utilities and samples

Quick Start

  1. Clone this repository via: git clone https://github.com/Nuand/bladeRF.git
  2. Fetch the latest pre-built bladeRF FPGA image. See the README.md in the hdl directory for more information.
  3. Fetch the latest pre-built bladeRF firmware image. See the README.md in the fx3_firmware directory for more information.
  4. Follow the instructions in the host directory to build and install libbladeRF and the bladeRF-cli utility.
  5. Attach the bladeRF board to your fastest USB port. After flashing firmware, be sure to press the reset button or unplug/replug the device.
  6. If you haven't upgraded your firmware, run bladeRF-flash -f <path_to_prebuilt_firmware>. This upgrade is required to utilize libusb support. Be sure to reset or power-cycle the board after flashing the firmware.
  • If your board is stuck in the FX3 bootloader or is at factory firmware or v1.2, see bladeRF-flash for additional details.
  1. You should now be able to see your device in the list output via bladeRF-cli -p
  2. See the overview of the bladeRF-cli for more information about loading the FPGA and using the command line interface tool

For more information, see the bladeRF wiki