bladeRF USB 3.0 Superspeed Software Defined Radio Source Code
http://nuand.com
- C 45.8%
- VHDL 21%
- Verilog 15.8%
- Tcl 3.8%
- MATLAB 3.2%
- Other 10.3%
This is intended to simplify some portability issues, since an int type is sufficient in the few spots where we had ssize_t. We'll need to still add a ssize_t wrapper around the Windows [SSIZE_T](msdn.microsoft.com/en-us/library/windows/desktop/aa383751(v=vs.85).aspx#SSIZE_T) for use inside the library. |
||
|---|---|---|
| firmware_common | ||
| fx3_firmware | ||
| hdl | ||
| host | ||
| .gitignore | ||
| COPYING | ||
| README.md | ||
bladeRF Source
This repository contains all the source code required to program and interact with a bladeRF platform, including firmware for the Cypress FX3 USB controller, HDL for the Altera Cyclone IV FPGA, and C code for the host side libraries, drivers, and utilities. The source is organized as follows:
| Directory | Description |
|---|---|
| [firmware_common] | Source and header files common between firmware and host software |
| fx3_firmware | Firmware for the Cypress FX3 USB controller |
| hdl | All HDL code associated with the Cyclone IV FPGA |
| host | Host-side libraries, drivers, utilities and samples |
Quick Start
- Clone this repository via:
git clone https://github.com/Nuand/bladeRF.git - Fetch the latest bladeRF FPGA image. See the README.md in the hdl directory for more information.
- Follow the instructions in the host directory to build and install libbladeRF and the bladeRF-cli utility.
- Attach the bladeRF board to your fastest USB port.
- You should now be able to see your device in the list output via
bladeRF-cli -p - See the overview of the bladeRF-cli for more information about using the command line interface tool
Coming Soon: Quick Start information for GNU Radio support via gr-osmosdr
In the meantime, see the Building GNURADIO from GIT section of kb3gtn's bladeRF setup guide for information on this.