bladeRF USB 3.0 Superspeed Software Defined Radio Source Code http://nuand.com
  • C 45.8%
  • VHDL 21%
  • Verilog 15.8%
  • Tcl 3.8%
  • MATLAB 3.2%
  • Other 10.3%
Find a file
Jon Szymaniak 8c2b16ca28 FX3 Firmware: Refactored build
These changes fix a regression caused by changeset
dc187e0640, which breaks the build
under Windows.

The firmware can now be built from the command line in both Linux and
Windows. The Eclipse project files now use the same Makefile as the
command line build, rather than generated Makefiles. As such, the
generated Debug/ has been removed.

Release builds are the default. To perform a debug build, run make
with DEBUG=y.
2013-07-06 14:14:09 -07:00
common host: fixup uart_cmd 2013-07-06 14:13:09 -07:00
fx3_firmware FX3 Firmware: Refactored build 2013-07-06 14:14:09 -07:00
hdl hdl: Fixed polarity of IQ data coming into FPGA 2013-07-06 14:14:06 -07:00
linux cli: Fixed extraneous error messages when failing to opend device 2013-07-06 14:14:07 -07:00
.gitignore cli: peek/poke an print/set combined into single files. 2013-07-06 04:50:38 -07:00
COPYING FSK bridge example 2013-02-18 20:11:39 -08:00
README Update README 2013-06-15 21:53:00 -04:00

This README details how to build the FSK bridge example

To build and run the FSK bridge rea
1) Open existing hdl/quartus/bladerf.qsf project in Quartus
	a) Generate the Nios core
		i) Tools -> QSys -> File -> Open -> navigate to ./hdl/fpga/ip/altera/nios_system/nios_system.qsys
		ii) After opening qsys file, go to Generation tab, click the "Generate" button
	b) Compile the embedded Nios image
		i) Tools -> Nios II Software Build Tools for Eclipse
			I)   File -> Import -> General -> Existing Projects into Workspace -> Next
				-> Browse to checkout root directory -> check both lms_spi_controller and lms_spi_controller_bsp
				-> Finish
			II)  right click lms_spi_controller_bsp -> NIOS II -> Generate BSP
			III) right click lms_spi_controller -> Build
			IV)  right click lms_spi_controller -> Make Targets -> Build... -> select mem_init_generate -> Build
	c) Synthesize FPGA image
		i) Processing -> Start Compilation

2) Compile driver and user mode applications
	a) cd linux/kernel ; make ; insmod bladeRF.ko
	b) cd ../apps; make
	c) To program the fpga execute ./simple_load c4images/blink.rbf
		i) Load bladerf.rbf from the quartus output_files directory

3) Use bladeRF as an FSK bridge!