bladeRF USB 3.0 Superspeed Software Defined Radio Source Code http://nuand.com
  • C 45.8%
  • VHDL 21%
  • Verilog 15.8%
  • Tcl 3.8%
  • MATLAB 3.2%
  • Other 10.3%
Find a file
2023-09-27 16:38:58 -05:00
debian debian changelog 2022-04-03 19:39:10 -07:00
doc doc: update development documentation 2018-12-21 16:42:46 -05:00
firmware_common firmware_common: add shared flash routines 2018-12-21 01:28:17 -08:00
fpga_common libbladeRF: OVERSAMPLE and DEFAULT sample rate guards implemented 2023-02-13 03:28:19 -08:00
fx3_firmware host: squashed cmake warnings 2023-02-13 03:28:19 -08:00
hdl test: fx3_gpif_8bit_iq_tb: generics config on startup 2023-09-27 16:38:58 -05:00
host test: Quartus version check in regression test 2023-09-27 16:38:58 -05:00
legal updated the year 2018-10-22 11:08:03 -04:00
thirdparty/analogdevicesinc host: combine diff patch path into one line 2020-11-14 11:45:33 -08:00
.clang-format clang-format: minor tweak for brackets on lists 2017-12-21 12:55:09 -05:00
.gitignore add more FPGA build artifact dirs to .gitignore 2018-09-06 17:00:38 -04:00
.gitmodules Move vendor library code for ad936x RFIC to /thirdparty; use git submodule (#689) 2018-11-12 18:13:58 -05:00
CHANGELOG CHANGELOG 2023.02 update 2023-02-13 03:48:56 -08:00
CMakeLists.txt host: squashed cmake warnings 2023-02-13 03:28:19 -08:00
CONTRIBUTORS CONTRIBUTORS: self-updating 2017-08-02 18:06:21 -04:00
COPYING legal: add AGPLv3, mention FPGA IP licenses (#38) 2018-05-23 12:15:00 -04:00
README.md README.md: update git clone instructions 2019-08-27 03:56:37 -05:00

bladeRF Source

This repository contains all the source code required to program and interact with a bladeRF platform, including firmware for the Cypress FX3 USB controller, HDL for the Altera Cyclone IV FPGA, and C code for the host side libraries, drivers, and utilities. The source is organized as follows:

Directory Description
firmware_common Source and header files common between firmware and host software
fx3_firmware Firmware for the Cypress FX3 USB controller
hdl All HDL code associated with the Cyclone IV FPGA
host Host-side libraries, drivers, utilities and samples

Quick Start

  1. Clone this repository via: git clone https://github.com/Nuand/bladeRF.git
  2. Fetch the latest pre-built bladeRF FPGA image. See the README.md in the hdl directory for more information.
  3. Fetch the latest pre-built bladeRF firmware image. See the README.md in the fx3_firmware directory for more information.
  4. Follow the instructions in the host directory to build and install libbladeRF and the bladeRF-cli utility.
  5. Attach the bladeRF board to your fastest USB port.
  6. You should now be able to see your device in the list output via bladeRF-cli -p
  7. You can view additional information about the device via bladeRF-cli -e info -e version.
  8. If any warnings indicate that a firmware update is needed, run:bladeRF-cli -f <firmware_file>.
  • If you ever find the device booting into the FX3 bootloader (e.g., if you unplug the device in the middle of a firmware upgrade), see the recovery command in bladeRF-cli for additional details.
  1. See the overview of the bladeRF-cli for more information about loading the FPGA and using the command line interface tool

For more information, see the bladeRF wiki.

Build Variables

Below are global options to choose which parts of the bladeRF project should be built from the top level. Please see the fx3_firmware and host subdirectories for more specific options.

Option Description
-DENABLE_FX3_BUILD=<ON/OFF> Enables building the FX3 firmware. Default: OFF
-DENABLE_HOST_BUILD=<ON/OFF> Enables building the host library and utilities overall. Default: ON