bladeRF USB 3.0 Superspeed Software Defined Radio Source Code http://nuand.com
  • C 45.8%
  • VHDL 21%
  • Verilog 15.8%
  • Tcl 3.8%
  • MATLAB 3.2%
  • Other 10.3%
Find a file
Robert Ghilduta 964d5ac777 hdl: add TX FIFOs and additional queueing controls
This commit expands on the previous commit and adds the TX FIFOs.

This commit also upgrades the repostiory to Quartus 12.1 along the way.
2013-06-02 23:14:05 -07:00
common FSK bridge example 2013-02-18 20:11:39 -08:00
fx3_firmware fx3: UART-SPI bridge baud rate change 2013-06-02 22:27:54 -07:00
hdl hdl: add TX FIFOs and additional queueing controls 2013-06-02 23:14:05 -07:00
linux FSK bridge example 2013-02-18 20:11:39 -08:00
COPYING FSK bridge example 2013-02-18 20:11:39 -08:00
README FSK bridge example 2013-02-18 20:11:39 -08:00

This README details how to build the FSK bridge example

To build and run the FSK bridge rea
1) Open existing hdl/quartus/bladerf.qsf project in Quartus
	a) Generate the Nios core
		i) Tools -> QSys -> File -> Open -> navigate to ./hdl/fpga/ip/altera/nios_system/nios_system.qsys
		ii) After opening qsys file, go to Generation tab, click the "Generate" button
	b) Compile the embedded Nios image
		i) Tools -> Nios II Software Build Tools for Eclipse
			I)   File -> Import -> General -> Existing Projects into Workspace -> Next
				-> Browse to checkout root directory -> check both lms_spi_controller and lms_spi_controller_bsp
				-> Finish
			II)  right click lms_spi_controller_bsp -> NIOS II -> Generate BSP
			III) right click lms_spi_controller -> Build
			IV)  right click lms_spi_controller -> Make Targets -> Build... -> select mem_init_generate -> Build
	c) Synthesize FPGA image
		i) Processing -> Start Compilation

2) Compile driver and user mode applications
	a) cd linux/kernel ; make ; inmod bladeRF.ko
	b) cd ../apps; make
	c) To program the fpga execute ./simple_load c4images/blink.rbf
		i) Load bladerf.rbf from the quartus output_files directory

3) Use bladeRF as an FSK bridge!