bladeRF USB 3.0 Superspeed Software Defined Radio Source Code http://nuand.com
  • C 45.8%
  • VHDL 21%
  • Verilog 15.8%
  • Tcl 3.8%
  • MATLAB 3.2%
  • Other 10.3%
Find a file
Jon Szymaniak a151ba4f99 bladeRF-cli: Handle unterminated quote as a non-fatal error condition
And additional return value has been added to str2args in order to
differentiate between an unexpected fatal (e.g, memory) error and
unterminated quotes.

This was previously causing cmd_handle() to fall through to an
"Unknown error" case, which is treated as a fatal error, resulting in
the CLI being terminated.

Thank you to Jens Elofsson (jenselo) for tracking down and reporting the
underlying defect! (Issue #259)
2014-06-30 01:34:00 -04:00
debian update debian/copyright to match inttypes_msvc.h rename 2014-06-21 13:49:37 -04:00
firmware_common fx3_firmware: add the firmware based loopback support 2014-04-04 05:29:37 -07:00
fx3_firmware fx3: Bumped version to 1.7.0 2014-05-17 23:40:32 -04:00
hdl Add note about pybombs interfering with nios2. 2014-06-21 12:51:45 -04:00
host bladeRF-cli: Handle unterminated quote as a non-fatal error condition 2014-06-30 01:34:00 -04:00
legal license: License changes on various portions of the codebase 2013-10-27 00:17:35 -04:00
.gitignore Nuke and ignore a neglected tilde file 2013-10-19 22:12:38 -04:00
CMakeLists.txt cmake: FX3 firmware build is disabled by default 2013-12-21 17:36:06 -05:00
CONTRIBUTORS Updated CONTRIBUTORS 2013-09-27 21:21:12 -04:00
COPYING COPYING: Typo fix 2014-02-14 22:54:52 -05:00
README.md README: Added link to wiki and removed data getting started lnk 2013-10-19 18:51:53 -04:00

bladeRF Source

This repository contains all the source code required to program and interact with a bladeRF platform, including firmware for the Cypress FX3 USB controller, HDL for the Altera Cyclone IV FPGA, and C code for the host side libraries, drivers, and utilities. The source is organized as follows:

Directory Description
firmware_common Source and header files common between firmware and host software
fx3_firmware Firmware for the Cypress FX3 USB controller
hdl All HDL code associated with the Cyclone IV FPGA
host Host-side libraries, drivers, utilities and samples

Quick Start

  1. Clone this repository via: git clone https://github.com/Nuand/bladeRF.git
  2. Fetch the latest pre-built bladeRF FPGA image. See the README.md in the hdl directory for more information.
  3. Fetch the latest pre-built bladeRF firmware image. See the README.md in the fx3_firmware directory for more information.
  4. Follow the instructions in the host directory to build and install libbladeRF and the bladeRF-cli utility.
  5. Attach the bladeRF board to your fastest USB port. After flashing firmware, be sure to press the reset button or unplug/replug the device.
  6. If you haven't upgraded your firmware, run bladeRF-flash -f <path_to_prebuilt_firmware>. This upgrade is required to utilize libusb support. Be sure to reset or power-cycle the board after flashing the firmware.
  • If your board is stuck in the FX3 bootloader or is at factory firmware or v1.2, see bladeRF-flash for additional details.
  1. You should now be able to see your device in the list output via bladeRF-cli -p
  2. See the overview of the bladeRF-cli for more information about loading the FPGA and using the command line interface tool

For more information, see the bladeRF wiki