bladeRF USB 3.0 Superspeed Software Defined Radio Source Code http://nuand.com
  • C 45.8%
  • VHDL 21%
  • Verilog 15.8%
  • Tcl 3.8%
  • MATLAB 3.2%
  • Other 10.3%
Find a file
Jon Szymaniak a5f68dfeb8 host: All build output is placed in a single directory
All executables and libraries are now placed in a single "output" directory.
For Windows builds, third-party DLLs are copied into this directory.

This commit also moves some CFLAGS changes in the top-level CMakeLists.txt
down to where some other compiler flags are set up. (Non-functional change)
2013-09-16 01:23:04 -04:00
firmware_common Initial JUMP_TO_BOOTLOADER support 2013-09-15 05:32:04 +00:00
fx3_firmware Bump FX3 firmware version 2013-09-15 05:32:04 +00:00
hdl hdl: Updated README.md to suggest reconfiguring dash rather than manual symlinking 2013-09-04 13:37:48 -04:00
host host: All build output is placed in a single directory 2013-09-16 01:23:04 -04:00
.gitignore Removed vim swap file that snuck in. Updated .gitignore to exlude these. 2013-08-26 21:02:59 -04:00
CONTRIBUTORS bladeRF-CLI: Perform file expansion when in interactive mode. 2013-08-28 00:20:20 -04:00
COPYING FSK bridge example 2013-02-18 20:11:39 -08:00
README.md GitHub edit: Fixed additional typos in README.md 2013-08-25 14:35:18 -04:00

bladeRF Source

This repository contains all the source code required to program and interact with a bladeRF platform, including firmware for the Cypress FX3 USB controller, HDL for the Altera Cyclone IV FPGA, and C code for the host side libraries, drivers, and utilities. The source is organized as follows:

Directory Description
firmware_common Source and header files common between firmware and host software
fx3_firmware Firmware for the Cypress FX3 USB controller
hdl All HDL code associated with the Cyclone IV FPGA
host Host-side libraries, drivers, utilities and samples

Quick Start

  1. Clone this repository via: git clone https://github.com/Nuand/bladeRF.git
  2. Fetch the latest pre-built bladeRF FPGA image. See the README.md in the hdl directory for more information.
  3. Fetch the latest pre-built bladeRF firmware image. See the README.md in the fx3_firmware directory for more information.
  4. Follow the instructions in the host directory to build and install libbladeRF and the bladeRF-cli utility.
  5. Attach the bladeRF board to your fastest USB port. After flashing firmware, be sure to press the reset button or unplug/replug the device.
  6. If you haven't upgraded your firmware, run bladeRF-cli -f <path_to_prebuilt_firmware>. This upgrade is required to utilize libusb support. Be sure to reset or power-cycle the board after flashing the firmware.
  7. You should now be able to see your device in the list output via bladeRF-cli -p
  8. See the overview of the bladeRF-cli for more information about loading the FPGA and using the command line interface tool

Coming Soon: Quick Start information for GNU Radio support via gr-osmosdr

In the meantime, see the Building GNURADIO from GIT section of kb3gtn's bladeRF setup guide for information on this.