bladeRF USB 3.0 Superspeed Software Defined Radio Source Code http://nuand.com
  • C 45.8%
  • VHDL 21%
  • Verilog 15.8%
  • Tcl 3.8%
  • MATLAB 3.2%
  • Other 10.3%
Find a file
Rey Tucker a964f22786 hdl: nios: implement Nios-based RFIC control
hdl: nios: implement a queuing strategy for RFIC commands

hdl: devices_rfic: all writes now go to queue

hdl: devices_rfic: move queue stuff into its own file

hdl: devices_rfic: cleanup includes, etc

hdl: devices_rfic: debugging improvements...

hdl: devices_rfic: code cleanup/formatting/streamlining

hdl: devices_rfic: track return value of queued jobs

stores a .rv member in the queue entry struct, then copies that to the
queue's .last_rv member at job completion.

standardizes _rfic_command_write_init args for future
function-pointerization.

hdl: devices_rfic: use function pointers

hdl: devices_rfic: remove inline hint, log_error->DBG

hdl: devices_rfic: swap read/write in rfic_command_fns for consistency

hdl: nios/devices_rfic: move stuff into a state struct

hdl: nios/Makefiles: dont build devices_rfic* on bladerf1

devices_rfic.c: remove stubs

devices_rfic.c: formatting

devices_rfic.h: only include if required

pkt_16x64: guard around bladerf2

pkt_16x64: more guards

pkt_16x64 brf2 guard tweak

pkt_16x64.h: guard the PKT_16x64 define

hdl: nios: devices_rfic: implement INIT command

hdl: devices_rfic: de-assert txnrx/enable

hdl: devices_rfic: move init read to its own fn

hdl: nios: devices_rfic: implement FREQUENCY command

hdl: nios: use shortened _rffe_*_enabled fn names

hdl: nios: devices_rfic: implement STATUS command

hdl: devices_rfic: implement RFIC status register

hdl: nios: implement _rfic_command_read_status

hdl: nios: devices_rfic: implement SAMPLERATE command

hdl: nios: devices_rfic: implement BANDWIDTH command

hdl: nios: devices_rfic: implement GAINMODE command

hdl: nios: devices_rfic: implement GAIN command

hdl: nios: devices_rfic: implement ENABLE command

hdl: nios: devices_rfic: implement RSSI command

hdl: nios: devices_rfic: use new common #defines

hdl: nios: devices_rfic: implement FILTER command

hdl: nios: devices_rfic: implement TXMUTE command
2018-12-06 14:45:24 -05:00
debian Move vendor library code for ad936x RFIC to /thirdparty; use git submodule (#689) 2018-11-12 18:13:58 -05:00
doc doc: version change checklist: debian changelog hint 2018-08-24 16:26:08 -04:00
firmware_common fx3: add BLADE_USB_CMD_QUERY_FPGA_SOURCE command 2018-09-26 14:50:23 -04:00
fpga_common fpga_common: nios: NIOS_PKT_16x64_TARGET_RFIC definition 2018-12-06 14:45:24 -05:00
fx3_firmware fx3: update changelog for v2.3.1 2018-09-26 15:17:45 -04:00
hdl hdl: nios: implement Nios-based RFIC control 2018-12-06 14:45:24 -05:00
host host: common: range.c: only build these if necessary on Nios 2018-12-06 14:45:24 -05:00
legal updated the year 2018-10-22 11:08:03 -04:00
thirdparty/analogdevicesinc thirdparty: adi: add bladerf2_headless platform 2018-12-06 14:45:24 -05:00
.clang-format clang-format: minor tweak for brackets on lists 2017-12-21 12:55:09 -05:00
.gitignore add more FPGA build artifact dirs to .gitignore 2018-09-06 17:00:38 -04:00
.gitmodules Move vendor library code for ad936x RFIC to /thirdparty; use git submodule (#689) 2018-11-12 18:13:58 -05:00
CHANGELOG bladeRF 2018.10-rc1 2018-10-30 17:12:29 -04:00
CMakeLists.txt Move vendor library code for ad936x RFIC to /thirdparty; use git submodule (#689) 2018-11-12 18:13:58 -05:00
CONTRIBUTORS CONTRIBUTORS: self-updating 2017-08-02 18:06:21 -04:00
COPYING legal: add AGPLv3, mention FPGA IP licenses (#38) 2018-05-23 12:15:00 -04:00
README.md Update CMake options in READMEs (#285) 2014-07-27 13:32:49 -04:00

bladeRF Source

This repository contains all the source code required to program and interact with a bladeRF platform, including firmware for the Cypress FX3 USB controller, HDL for the Altera Cyclone IV FPGA, and C code for the host side libraries, drivers, and utilities. The source is organized as follows:

Directory Description
firmware_common Source and header files common between firmware and host software
fx3_firmware Firmware for the Cypress FX3 USB controller
hdl All HDL code associated with the Cyclone IV FPGA
host Host-side libraries, drivers, utilities and samples

Quick Start

  1. Clone this repository via: git clone https://github.com/Nuand/bladeRF.git
  2. Fetch the latest pre-built bladeRF FPGA image. See the README.md in the hdl directory for more information.
  3. Fetch the latest pre-built bladeRF firmware image. See the README.md in the fx3_firmware directory for more information.
  4. Follow the instructions in the host directory to build and install libbladeRF and the bladeRF-cli utility.
  5. Attach the bladeRF board to your fastest USB port.
  6. You should now be able to see your device in the list output via bladeRF-cli -p
  7. You can view additional information about the device via bladeRF-cli -e info -e version.
  8. If any warnings indicate that a firmware update is needed, run:bladeRF-cli -f <firmware_file>.
  • If you ever find the device booting into the FX3 bootloader (e.g., if you unplug the device in the middle of a firmware upgrade), see the recovery command in bladeRF-cli for additional details.
  1. See the overview of the bladeRF-cli for more information about loading the FPGA and using the command line interface tool

For more information, see the bladeRF wiki.

Build Variables

Below are global options to choose which parts of the bladeRF project should be built from the top level. Please see the fx3_firmware and host subdirectories for more specific options.

Option Description
-DENABLE_FX3_BUILD=<ON/OFF> Enables building the FX3 firmware. Default: OFF
-DENABLE_HOST_BUILD=<ON/OFF> Enables building the host library and utilities overall. Default: ON