bladeRF USB 3.0 Superspeed Software Defined Radio Source Code http://nuand.com
  • C 45.8%
  • VHDL 21%
  • Verilog 15.8%
  • Tcl 3.8%
  • MATLAB 3.2%
  • Other 10.3%
Find a file
Sylvain Munaut c658692e25 lib/lms: Clean up of the PLL parameters setting
Using 64 bit math is just way easier to read and
just as safe and precise.

Also cleanup random bits in that area

Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
2013-07-21 13:37:03 +02:00
common linux_driver: add ioctl()s for reading and writing OTP and NAND 2013-07-06 14:14:21 -07:00
fx3_firmware doc: Touched up top-level README, added Eclipse info to FX3 README 2013-07-17 00:00:43 -04:00
hdl hdl: Touched up hdl README.md to provide a few more details 2013-07-18 23:59:53 -04:00
linux lib/lms: Clean up of the PLL parameters setting 2013-07-21 13:37:03 +02:00
.gitignore cli: peek/poke an print/set combined into single files. 2013-07-06 04:50:38 -07:00
COPYING FSK bridge example 2013-02-18 20:11:39 -08:00
README.md doc: Touched up top-level README, added Eclipse info to FX3 README 2013-07-17 00:00:43 -04:00

bladeRF Source

This repository contains all the source code required to program and interact with a bladeRF platform, including firmware for the Cypress FX3 USB controller, HDL for the Altera Cyclone IV FPGA, and C code for the host side driver, library, and command line interface.

The source is organized as follows:

Directory Description
common Source and header files common across the platform
fx3_firmware Firmware for the Cypress FX3 USB controller
hdl All HDL code associated with the Cyclone IV FPGA
linux The linux kernel driver, library and command-line interface for interacting with a bladeRF device

Building Procedure

Each subsection of the source code can be built by itself and maintains their own README files for building. The recommended build flow is as such: