bladeRF/host
2013-09-02 16:40:25 -04:00
..
cmake bladeRF-cli: ENABLE_INTERACTIVE_TECLA set to OFF if libtecla is not found 2013-08-31 21:14:06 -04:00
common Added variable-level logging mechanism 2013-09-02 15:39:41 -04:00
drivers/linux Fixed missing bracket and c&p error in bladeRF.c, removed dup defines, moved define from .c to .h 2013-09-01 20:58:33 +02:00
libraries Replaced dbg_printf's with new logging mechanism 2013-09-02 15:39:55 -04:00
misc udev: Single rule for both libusb and Linux driver-based support. 2013-08-22 21:26:22 -04:00
utilities bladeRF-cli: Bumping CLI minor rev 2013-09-02 16:40:25 -04:00
CMakeLists.txt Update CMakeLists.txt 2013-08-28 10:22:52 -04:00
README.md Updated README.md's, moved utilities/cli -> utilities/bladeRF-cli 2013-08-17 13:03:21 -04:00

bladeRF Host Source

This directory contains the items outlined in the following table. Note that this structure includes some items planned for future development.

Directory Description
cmake CMake scripts and modules
drivers Device drivers for supported operating systems
libraries The main bladeRF support library and supplemental libraries
misc Miscellaneous files
utilities Applications and tools

Dependencies

libUSB

libusb-1.0 and its development headers are required. >= v1.0.12 is recommended for Linux, and >= v1.0.13 is recommended for Windows. Ideally, the latest released version is always recommended. Please see the libusb ChangeLog for more information.

CMake

CMake is used to build the items in this directory.

Ubuntu/Debian:

sudo apt-get install libusb-1.0.0 libusb-1.0.0-dev cmake

Build

From this directory, create a 'build' directory. This is personal preference, of course. It allows for all build files to be cleaned up via a single rm -r build/ command. Next, run cmake to configure the build, followed by make and sudo make install to build and install libraries and applications.

mkdir -p build
cd build
cmake [options] ../
make
sudo make install

Below is a list of useful and project-specific CMake options. Please see the CMake variable list in CMake's documentation for more information.

Option Description
-DCMAKE_BUILD_TYPE=<type> Set to "Debug" to enable a debug build. "Release" is the default.
-DCMAKE_C_COMPILER=<compiler> Specify the compiler to use. Otherwise, CMake will determine a default.
-DENABLE_GDB_EXTENSIONS=<ON/OFF> GCC & GDB users may want to set this to use -ggdb3 instead of -g. Disabled by default.
-DENABLE_BACKEND_LIBUSB=<ON/OFF> Enables libusb backend in libbladeRF. Enabled by default.
-DENABLE_BACKEND_LINUX_DRIVER=<ON/OFF> Enables Linux driver in libbladeRF. Disabled by default.
-DENABLE_INTERACTIVE_TECLA=<ON/OFF> Enable bladeRF-cli interactive mode support via libtecla. Enabled by default.
-DINSTALL_UDEV_RULES=<ON/OFF> Install udev rules to /etc/udev/rules.d/. Disabled by default.