bladeRF USB 3.0 Superspeed Software Defined Radio Source Code http://nuand.com
  • C 45.8%
  • VHDL 21%
  • Verilog 15.8%
  • Tcl 3.8%
  • MATLAB 3.2%
  • Other 10.3%
Find a file
Robert Ghilduta ddc81d0fb1 hdl: adjust the number of cycles spent copying data in HS case
The number of bytes copied should also change depending on the USB speed of the
bladeRF. This commit completes commit 8d9ed972ca.
2013-07-23 02:02:14 -07:00
common fix HS buffering 2013-07-22 03:45:40 -07:00
fx3_firmware doc: Touched up top-level README, added Eclipse info to FX3 README 2013-07-17 00:00:43 -04:00
hdl hdl: adjust the number of cycles spent copying data in HS case 2013-07-23 02:02:14 -07:00
linux linux_driver: fix typo in function call 2013-07-23 02:01:49 -07:00
.gitignore cli: peek/poke an print/set combined into single files. 2013-07-06 04:50:38 -07:00
COPYING FSK bridge example 2013-02-18 20:11:39 -08:00
README.md doc: Touched up top-level README, added Eclipse info to FX3 README 2013-07-17 00:00:43 -04:00

bladeRF Source

This repository contains all the source code required to program and interact with a bladeRF platform, including firmware for the Cypress FX3 USB controller, HDL for the Altera Cyclone IV FPGA, and C code for the host side driver, library, and command line interface.

The source is organized as follows:

Directory Description
common Source and header files common across the platform
fx3_firmware Firmware for the Cypress FX3 USB controller
hdl All HDL code associated with the Cyclone IV FPGA
linux The linux kernel driver, library and command-line interface for interacting with a bladeRF device

Building Procedure

Each subsection of the source code can be built by itself and maintains their own README files for building. The recommended build flow is as such: